Covercraft MM42906 Mult Mask Mustang/Gt 99-3

Protect the vulnerable front end of your Mustang from road damage with a CoverCraft Mustang Front End Mask! These Mustang Bras provide maximum protection helping to prevent rocks, stones, and hail from damaging your car. Unlike a tradition full frontal bra that must be removed before opening your hood, these CoverCraft Masks utilize a full coverage, multi-piece design allowing full access to your engine bay without removing the bra. Features: Protective air intake screens are an integral part of the mask, not separate, and they are sewn into the outside of the mask so there are no loose pieces of material inside to abrade the paint surface. Covered aluminum tabs allow adjustment at the fender wells as vinyl expands and contracts due to temperature. Take a look at a non-adjustable mask being driven down the road and you'll see why this is an important feature. Reinforced air foils prevent flapping and lift. Very few patterns don't require this feature; there is just too much air whipping around the front of your vehicle as it goes down the road, like cross-winds and back drafts from passing semi trucks CoverCraft uses a micro-perforated finish on our vinyl. It allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather. Still, if a mask becomes wet and is going to be left sitting in the sun, they recommend it be removed to allow the backing to dry properly. Their heavy-gauge leather grain vinyl has a soft, protective backing. They use white non-woven fleece so you can easily see when it's time to clean the back-side of the mask. Seams are overlapped and finished with a strong, durable top stitch. Edges are covered with soft, non-abrasive felt-rimmed bindings. Specifications: Application: 1999-2004 GT 1999-2004 V6 2001 Bullitt 2003-2004 MACH1