psp filters

Overall Rating: ( 1 reviews )

1. ( 1 of 1 found this review helpful ) Posted: Jun 28 2008

   As a new PSP Slim owner, I was in search of a decent case for traveling which would offer suitable protection for the PSP if rolling around in my shoulder bag or luggage. The zippered outer shell is reinforced to protect from drops or bang ups, while the interior is lined with soft felt. A middle interior flap covers the PSP which lays in snugly in the bottom portion of the case. The back side of the middle flap holds 3 memory sticks and the inner top lid portion of the case has one long pocket which can probably hold no more than 4 UMD's or (not and) earbud headphones. A nice bonus is the included headphones and screen protector. While the headphones leave something to be desired, HORI has always made some of the best LCD protectors out there. You also get a screen cloth and gimmicky little dust wiper that attaches to the loop hook on the PSP. PROS: Hard case protection, UMD/card storage, LCD protector CONS: bunk headphones, no exterior port access

See all reviews...

Overall Rating: ( 1 reviews )

1. Posted: Jul 6 2008

   Logan's Shadow has incredible graphics and game play. I have been at it for about three hours so far, and I am VERY glad that I bought it. Also like the amount of control you have. It saves game play automatically, so if you do get yourself killed, you don't have to do a bunch of stuff over again !! I HATE it when you have to repeat over and over if something goes wrong. But not in this one !!

See all reviews...

Overall Rating: ( 28 reviews )

1. Posted: Jul 30 2008

   I got this PSP Protective Filter scratched!!! When I am playing I can clearly see 8 huge scratch on the filter. On top of that, the PSP Protective Filter does not cover the entire screen! So, if you feel brave and lucky try it, otherwise you should look for something better. In conclusion, I will never buy anything else made from this HORI company.

2. ( 1 of 1 found this review helpful ) Posted: Jul 13 2008

   Many people have problem applying the filter. If you just peel off and apply the sticker directly, you will face the following 3 major problem: 1. Dust particles 2. air bubbles (or known as air pockets, caused by air or dust) 3. Sticker orientation accuracy To solve the above problems, here is the secret and the correct steps, not limited to this PSP filter, in fact, this secret applied to all stickers application. Do the following steps, and you will be amazed with the result. Ingredients: a. The screen protector filter b. Bowl c. hand soap, body shampoo (lotion, etc.. anything alcaline based will do) d. water e. plastic paper credit card sized or smaller which act as your lifter. Optional, use the front/back plastic cover for the sticker will do as well. f. tissue paper Step 1. Wipe the PSP screen clean 2. Fill the bowl with one or two teaspoon amount of hand soap and dilute it with half bowl of water. 3. scoop out the bubbles in the bowl as many as possible. 4. Remove both front and back side of the filter. (remember the up-side) 5. Soak the filter into the bowl and take it out with your plastic paper. (try not to use finger) 6. Apply the filter gently (while it is still little wet) 7. Adjust the filter to the correct position desired. 8. Push the liquid out with a credit card from middle to outside. 9. Wipe any water that squeezed out from the corner of the sticker as soon as soon you see it. 10. If you see dust particle (a small air pocket with a little dust dot in the middle) inside the sticker, lift it up with a plaster paper, remove the dust, and close it back. 11. repeat step 7 to 10 until it is completely dry and up to your desire. If application is not as your desired, remove the sticker, soak it back to the same bowl, clean the sticker to make sure no dust particles with the same way you lean your contact lens, and reapply. (No, you don't have to throw your filter!) Finally you got yourself a perfect application of filter and air bubble-less. This is the same technique as applying tinted film/stickers on glass windows, car windows and wind screen by the car assessories professionals. The only difference is they spray soap water on the filter instead of using a bowl (coz PSP filter is so small compared with filter for tinted glass application) Try it, you will be amazed by the result instead of apply directly without soap water.

3. Posted: Jul 13 2008

   Many people have problem applying the filter. If you just peel off and apply the sticker directly, you will face the following 3 major problem: 1. Dust particles 2. air bubbles (or known as air pockets) 3. Sticker orientation accuracy To solve the above problems, here is the secret and the correct steps, not limited to this PSP filter, in fact, this secret applied to all stickers application. Do the following steps, and you will be amazed with the result. 1. Wipe the screen clean 2. Spray diluted body shampoo (lotion, detergent, etc.. anything alcaline based will do, just add water to make it diluted) on both the screen and the sticky side of the filter (I said SPRAY! Spray-job is more even than hand-job, hand-job still works but risk of finger prints and your hand has to be applied as well, and rather a bit messy) 3. Apply the filter (while it is still wet on both screen and sticker) 4. Adjust the filter to the correct position desired. 5. Push the liquid out with a credit card from middle to outside (at the same time, dust particles come out together with the water) until it is completely dry. You then have a perfect application of filter and air bubble-less. This is the same technique as applying tinted film/stickers on glass windows, car windows and wind screen by the car assessories professionals. Try it, you will be amazed by the result. Don't blame the sticker for air pocket, you only need to know the right technique, that's all.

See all reviews...

Overall Rating: ( 2 reviews )

1. Posted: Dec 8 2007

   This product does not work as expected. I wanted to connect a mouse and a keyboard to the one PS/2 port on my ThinkPad notebook, but this adapter casues the computer to beep when both devices are connected.

2. Posted: Oct 31 2007

   didn't work at all
   bought item to use ps/2 keyboard and ps/2 mouse on a laptop with only 1 ps/2 port. They would not work together when connected. I would not buy this product.
   Pros: none
   Cons: it didn't work
   

See all reviews...