1 to 20 of about 1280 products for 12 volt motors

Result for "12 volt motors"
12-Volt 450C Tankless Air Compressor Kit (100% Duty Cycle @ 100 PSI)

Free Shipping

VIAIR 12-Volt 450C Tankless Air Compressor Kit (100% Duty Cycle @ 100 PSI) - 45040 - Designed To Fill Air Tanks, For Tanks 5-Gallon & Smaller Not equipped w/ ON/OFF switch or pressure sensitive shutoff Use of a pressure switch & relay recommended & required Built For Years Of Reliable Service Gearless, direct-drive 12V electric motor w/ sealed housing

more >>
Power Equipment Direct
$219.95 See It
Battery Charger For Motorized Structural Foam Tilt Trucks - 12-Volt
C&H Distributors
$325.00 See It
Brushless HVAC DC Motor, 1/10hp 120 Volt 3-Speed ECM Motor # CS89

1/10 hp, Nameplate RPM 1100/900/700, 1.56 amps 120V ; 3 Speeds, CWLE Rotation; Open Air-Over; Shaft Dia. 9 5/16" x 1/2" x 9 5/16", ; Ball Bearings; Ring to Ring Center 4-1/2"; 1 Year Manufacture Warranty. 3 Speed Motor; Ring Dia. 2-1/2"; Overall Length 22-7/16"; 54" Long Leads. Fan Coils, Air Conditioners, Blowers, Shaded Pole, PSC Retrofit, Trane, Carrier, Amana, GE, Fan Coil & PTAC Units. Century s new Comfort Select FC is a brushless DC high efficiency motor that runs off 120 volt single phase input. The motor is controlled by integrated electronics providing advanced motor protection with the same performance characteristics as a shaded pole or PSC (permanent split capacitor) motor. The Comfort Select FC is designed as a direct replacement or retrofit product for shaded pole and PSC motors and may be used in fan coil and PTAC* applications as an energy saving retrofit.

more >>
Electric Motor Warehouse
$138.45 See It
Instajack 12-volt Motorized Auto Jack

FREE SHIPPING Orders $50+

The InstaJACK is a powerful motorized jack that operates by using the 12-volt power port or cigar lighter for power. It can lift any vehicle weighing up to 7000 pounds as much as 17 inches off the ground.

more >>
Overstock Main
$130.99 See It
12-Volt 450C Tankless Air Compressor Kit (100% Duty Cycle @ 100 PSI) - 45040

VIAIR 12-Volt 450C Tankless Air Compressor Kit (100% Duty Cycle @ 100 PSI) - 45040 - Designed To Fill Air Tanks, For Tanks 5-Gallon & Smaller Not equipped w/ ON/OFF switch or pressure sensitive shutoff Use of a pressure switch & relay recommended & required Built For Years Of Reliable Service Gearless, direct-drive 12V electric motor w/ sealed housing

more >>
Air Compressors Direct
$219.95 See It
1/2 hp 1075 RPM, 2-Speed, 277 Volt, 60°C Condensor Motor Century # 7FSE1056

1/2 hp 1075 RPM, 2-Speed, 2.4 amps, 277 Volt; 1/2" x 6" Shaft; 26" Leads, Class B Insulation; PSC Motor; Includes 2-Prong, 10 MFD Capacitor; Reversing Plug; No hubs; 60°C. Ambient Temp; Sleeve Bearings; One Year Warranty. Condensor-Heat Pump-Refrigeration motors. Permanent split capacitor motor, all angle mount, automatic overload protection, reversible, extended thru bolts. Totally Enclosed Air Over motor. 2-prong capacitor shipped with motor.

more >>
Electric Motor Warehouse
$211.95 See It
Milwaukee® 2597-22 M12 Fuel™ Hammer Drill & Impact Driver 2-Tool Combo Kit

Milwaukee 2597-22 M12 FUEL 2-Tool Combo Kit w/ Hammer Drill & Impact Driver M12 FUEL takes 12-Volt technology to the next level of performance. Milwaukee M12 FUEL features a POWERSTATE Brushless Motor, REDLINK PLUS Electronic Intelligence and REDLITHIUM Battery Technology, resulting in longer motor life, more run time and more power. The POWERSTATE brushless motor works harder and lives longer than all leading competitors, while reducing noise and cooling more rapidly to deliver years of maintenance-free performance. The M12 REDLITHIUM XC4.0 Battery provides up to 4X more runtime than standard Lithium-Ion batteries. REDLINK PLUS Intelligence hardware and software is the world's most advanced system of cordless power tool electronics that will maximize performance and protect your investment. Includes: (1) M12 FUEL 1/2" Hammer Drill/Driver (2404-20)(1) M12 FUEL 1/4" Hex Impact Driver (2453-20)(1) M12 REDLITHIUM 2.0 Compact Battery Pack (48-11-2420)(1) M12 REDLITHIUM XC 4.0 Extended Capacity Battery Pack (48-11-2440)(1) M12 Lithium-ion Battery Charger (48-59-2401)(2) Belt Clip(1) Carrying Case 14.25 L. 10.55 W. 18.97 H.

more >>
Global Industrial
$269.00 See It
1/4 hp 1075 RPM, 2-Speed, 277 Volt, 60°C Condensor Motor Century # 7FSE1026

1/4 hp 1075 RPM, 2-Speed, 1.8 amps, 277 Volt; 1/2" x 6" Shaft; 26" Leads, Class B Insulation; PSC Motor; Includes 2-Prong, 5 MFD Capacitor; Reversing Plug; No hubs; 60°C. Ambient Temp; Ball Bearings; One Year Warranty. Condensor-Heat Pump-Refrigeration motors. Permanent split capacitor motor, all angle mount, automatic overload protection, reversible, extended thru bolts. Totally Enclosed Air Over motor. 2-prong capacitor shipped with motor.

more >>
Electric Motor Warehouse
$175.18 See It
1/2 hp 1750 RPM 56C Frame TENV 208-230/460 Volts Stainless Steel Leeson Electric Motor # 191204

1/2 hp 1750 RPM, 1.6/.08 amps 208-230/460 Volts 60hz. Three Phase; NEMA 56C Frame Keyed Shaft 5/8" Diameter x 1 7/8"; TENV - Totally Enclosed Non-Ventilated - Service Factor = 1.15; Reversible; All Stainless Steel - Rigid Base - C Face Mount; One Year Manufacture Warranty; The new Leeson Stainless Steel Motors are tough to withstand the severe washdown environments. Leeson Stainless Steel Motors' all exterior components frame, base, endshields, fan guard, shaft, hardware, conduit box and cover are made from 300 series Stainless steel for maximum corrosion resistance. Nameplate data is permanently laser-etched into the motor frame no Mylar nameplate that can wash off or riveted metal nameplate to trap dirt. No paint or any type of coating is used on the exterior of the Leeson Washguard motors. Leeson Electric's Washguard SST Stainless Steel Motor offers features above and beyond these other motors and at a competitive price.

more >>
Electric Motor Warehouse
$291.28 See It
1/2 hp 2500 RPM 90 Volts DC 56C Frame TEFC Leeson Electric Motor # 098006

1/2 hp 2500 RPM 90 Volts DC 56C Frame TEFC; NEMA 56C Frame 5/8" Diameter Keyed shaft - 5.0 amps 90 Volts DC; 56C Face with Removable Bolt On Base; TEFC = Totally Enclosed Fan cooled; Permanent magnet DC motor; 1 Year Manufacture Warranty; High voltage permanent magnet DC Motors are typically used with an SCR controller in applications requiring adjustable speed and constant torque throughout the speed range. They are also widely used in applications requiring dymanic braking or adjustable speed/reversing Capablities. Reversible rotation with simple 2-lead connection. Note: If base is removed, do not reinstall the bolts without washers to compensate for the base thickness

more >>
Electric Motor Warehouse
$240.74 See It
1/2 hp 1750 RPM 90 Volts DC 56C Frame TEFC Leeson Electric Motor # 098000

1/2 hp 1750 RPM 90 Volts DC 56C Frame TEFC; NEMA 56C Frame 5/8" Diameter Keyed shaft - 5.0 amps 90 Volts DC; 56C Face with Removable Bolt On Base; TEFC = Totally Enclosed Fan cooled; Permanent magnet DC motor; 1 Year Manufacture Warranty; High voltage permanent magnet DC Motors are typically used with an SCR controller in applications requiring adjustable speed and constant torque throughout the speed range. They are also widely used in applications requiring dymanic braking or adjustable speed/reversing Capablities. Reversible rotation with simple 2-lead connection. Note: If base is removed, do not reinstall the bolts without washers to compensate for the base thickness

more >>
Electric Motor Warehouse
$273.19 See It
1/2 hp 2500 RPM 180 Volts DC 56C Frame TEFC Leeson Electric Motor # 098007

1/2 hp 2500 RPM 180 Volts DC 56C Frame TEFC; NEMA 56C Frame 5/8" Diameter Keyed shaft - 2.5 amps 180 Volts DC; 56C Face with Removable Bolt On Base; TEFC = Totally Enclosed Fan cooled; Permanent magnet DC motor; 1 Year Manufacture Warranty; High voltage permanent magnet DC Motors are typically used with an SCR controller in applications requiring adjustable speed and constant torque throughout the speed range. They are also widely used in applications requiring dymanic braking or adjustable speed/reversing Capablities. Reversible rotation with simple 2-lead connection. Note: If base is removed, do not reinstall the bolts without washers to compensate for the base thickness

more >>
Electric Motor Warehouse
$240.74 See It
1/2 hp 1750 RPM 180 Volts DC 56C Frame TEFC Leeson Electric Motor # 098008

1/2 hp 1750 RPM 180 Volts DC 56C Frame TEFC; NEMA 56C Frame 5/8" Diameter Keyed shaft - 2.5 amps 180 Volts DC; 56C Face with Removable Bolt On Base; TEFC = Totally Enclosed Fan cooled; Permanent magnet DC motor; 1 Year Manufacture Warranty; High voltage permanent magnet DC Motors are typically used with an SCR controller in applications requiring adjustable speed and constant torque throughout the speed range. They are also widely used in applications requiring dymanic braking or adjustable speed/reversing Capablities. Reversible rotation with simple 2-lead connection. Note: If base is removed, do not reinstall the bolts without washers to compensate for the base thickness

more >>
Electric Motor Warehouse
$273.19 See It
Carbonator Pump Motor 1/2 hp 1725 RPM 115/230 Volts Century # CB2054AD

1/2 hp 1725 RPM, 6.8/3.4 amps, 115/230 volts 50/60 hz.; Rotation: Reversible ; 48Y Frame; Overall Length = 8.8" ; Split Phase; Sleeve Bearings; Class B Insulation; 1 Year Manufacture Warranty. Motors have a threaded conduit hole. Short, slotted shaft for close-coupling the carbonator pump to the motor. Extended hub for direct-mounting. Uses: Liquid transfer pumps, vending machine pumps, and other hubmounted pump applications.

more >>
Electric Motor Warehouse
$138.58 See It
1/2 hp 1725 RPM 56 Frame TEFC (Farm Duty) 115/208-230 volts Leeson Electric Motor # 110086

1/2 hp 1725 RPM, 8.8/4.4 amps, 115/208-230 volts 60hz ; TEFC - Totally Enclosed Fan cooled - Electrically Reversible ; Manual Overload Protection - Service Factor 1.15; NEMA 56 Frame - Flat Rigid base mount - 5/8" Diameter shaft x 1 7/8" ; Class F Insulated - Ball Bearings w/low temp grease ; Single Phase Leeson Farm Duty High Starting Torque, Capacitor start motor. Overall Length = 10.81" Excellent motor for any application requiring a 1/2hp motor. This Totally Enclosed motor is Excellent for woodworking machines and other industrial machines where the motor is exposed to saw dust, dirt, oil and other partics in the air that will damage the motor. Motor also has manual overload protection to prevent damage in an overload situation. Mounting is standard NEMA 56 frame, flat base with 4 holes. 3" x 5" mounting. Farm duty motors have many extra features over standard motors such as double sealed bearings with Exxon grease for a temperature range of -20F to +350F. Rubber boot over reset button provides additional protection. Gasketed junction box and capacitor covers. 1 Year Manufacture Warranty.

more >>
Electric Motor Warehouse
$167.51 See It
1/2 hp 1725 RPM 56C Frame (Farm Duty) 115/230 Volts Leeson Electric Motor # 110492

1/2 hp 1725 RPM, 8.8/4.4 amps, 115/230 Volts 60hz.; NEMA 56C Frame Keyed Shaft 5/8" Diameter x 1 7/8"; TEFC Totally Enclosed Fan cooled - Service Factor = 1.15; Reversible; Manual Overload Protection; Round Body Motor - No Base; Leeson Farm Duty High Torque, Capacitor Start motor. This Totally Enclosed motor is Excellent for machines where the motor is exposed to saw dust, dirt, oil and other partics in the air that will damage the motor. Motor also has manual overload protection to prevent damage in an overload situation. Mounting is standard NEMA "C" Face, no rigid base. Farm duty motors have many extra features over standard motors such as double sealed bearings with Exxon grease for a temperature range of -20F to +350F. Rubber boot over reset button provides additional protection. Gasketed junction box and capacitor covers. 1 Year Manufacture Warranty.

more >>
Electric Motor Warehouse
$195.43 See It
1/2 hp 3450 RPM 56C Frame TENV 208-230/460 Volts Stainless Steel Leeson Electric Motor # 191203

1/2 hp 3450 RPM, 1.5/.75 amps, 208-230/460 Volts 60hz. Three Phase; NEMA 56C Frame Keyed Shaft 5/8" Diameter x 1 7/8"; TENV - Totally Enclosed Non-Ventilated - Service Factor = 1.15; Reversible; All Stainless Steel - Rigid Base - C Face Mount; One Year Manufacture Warranty; The new Leeson Stainless Steel Motors are tough to withstand the severe washdown environments. Leeson Stainless Steel Motors' all exterior components frame, base, endshields, fan guard, shaft, hardware, conduit box and cover are made from 300 series Stainless steel for maximum corrosion resistance. Nameplate data is permanently laser-etched into the motor frame no Mylar nameplate that can wash off or riveted metal nameplate to trap dirt. No paint or any type of coating is used on the exterior of the Leeson Washguard motors. Leeson Electric's Washguard SST Stainless Steel Motor offers features above and beyond these other motors and at a competitive price.

more >>
Electric Motor Warehouse
$288.18 See It
1/2 hp 1750 RPM 56C Frame TENV 208-230/460 Volts Stainless Steel Leeson Electric Motor # 191205

1/2 hp 1750 RPM, 1.6/.80 amps, 208-230/460 Volts 60hz. Three Phase; NEMA 56C Frame Keyed Shaft 5/8" Diameter x 1 7/8"; TENV - Totally Enclosed Non-Ventilated - Service Factor = 1.15; Reversible; All Stainless Steel - No Base - C Face Mount; One Year Manufacture Warranty; The new Leeson Stainless Steel Motors are tough to withstand the severe washdown environments. Leeson Stainless Steel Motors' all exterior components frame, base, endshields, fan guard, shaft, hardware, conduit box and cover are made from 300 series Stainless steel for maximum corrosion resistance. Nameplate data is permanently laser-etched into the motor frame no Mylar nameplate that can wash off or riveted metal nameplate to trap dirt. No paint or any type of coating is used on the exterior of the Leeson Washguard motors. Leeson Electric's Washguard SST Stainless Steel Motor offers features above and beyond these other motors and at a competitive price.

more >>
Electric Motor Warehouse
$284.76 See It
Milwaukee® 2453-22 M12 Fuel™ 1/4" Hex Impact Driver Kit

Milwaukee 2453-22, M12 FUEL Impact Driver Kit, 1/4" Hex, 12V The M12 FUEL 1/4" Hex Impact Driver Kit delivers maximum performance in a compact size. This hex impact driver provides up to 3X longer motor life, up to 2X more runtime, and proprietary Milwaukee 2-Mode DRIVE CONTROL for better control over the power and speed required for specific applications. The POWERSTATE Brushless Motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. The REDLITHIUM 2.0 Compact Battery Pack delivers up to 20% more power and 2X more recharges than standard lithium-ion batteries, as well as best-in-class performance in extreme jobsite conditions. Its reduced size and weight cut down on user fatigue, while the onboard fuel gauge helps you monitor the charge more accurately, so there's less downtime on the job. REDLINK PLUS intelligence ensures optimized performance and protection from overload, overheating and over-discharge. The M12 FUEL 1/4" Hex Impact Driver offers fastening speed comparable to 18-volt impact drivers, and 1200 in-lbs of torque. Its compact size and weight allow access to tighter areas and reduce user fatigue. The built-in LED light illuminates work surfaces in dark work spots. The kit includes a 12-volt lithium-ion battery charger. Features: POWERSTATE Brushless Motor: Delivers up to1,200 in-lbs of peak torque with maximum sustained torque to complete a variety of applicationsREDLITHIUM 2.0 Battery Technology: Superior pack construction, electronics, and performance deliver more work per charge and more work over pack life than any battery on the marketREDLINK Plus Intelligence: The most advanced system of cordless power tool electronics. Provides optimized performance and overload protection using total system communication between tool, battery and chargerDRIVE CONTROL : Two fastening modes provide variable power and speed for precision work and heavy duty applications 14.80 L. 12.44 W. 4.72 H.

more >>
Global Industrial
$169.00 See It
1/4 hp 1800 RPM 56C Frame 12 Volts DC TENV Leeson Electric Motor # 108045

1/4 hp 1800 RPM 56C Frame 12 Volts DC TENV; NEMA 56C Frame Low Voltage Motor 12 Volts DC 21.0 Amps; 56C Face with Removable Bolt On Base; TENV = Totally Enclosed Non Ventilated; Permanent magnet DC motor; 1 Year Manufacture Warranty; Low voltage permanent magnet DC motors are suitab for installations having battery or solar powered operations. High starting torques for heavy load applications. Linear speed/torque characteristics over entire speed range. Capable of dynamic braking for faster stops. Motors have sealed ball bearings. Reversible-Simple 2-lead connection. Exact replacement for Dayton 6MK98 (The Dayton is actually made by Leeson Electric)

more >>
Electric Motor Warehouse
$308.73 See It
Search within results