1 to 20 of about 2092 products for 14x1 threads

Result for "14x1 threads"
Marutex Hex Washer Head Screws 14 X 1

Billy Goat Marutex Self-Drilling Indented Hex Washer Heads are a hand-drive screw with #3 drill points and tapping screw threads used to fasten fiberglass fiber cement and aluminum. Marutex is a special stainless steel for demanding installation projects.

more >>
Jamestown Distributors
$0.94 See It
Collegiate Tunnel 55 x 14 x 14 (EA)

2.0mm sizes. • #24 thread count. • Synthetic filament fiber. • “No-sag” net system. • Extruded permanent Black color. • UV treated. • 1-3/4" square mesh. • 100% water proof. • Ropes around p

more >>
eSportsonline
$703.99 See It
#14 Bronze Wood Screws FH 14 x 3-1/2

#14 Flat head slotted bronze wood screws. Silicon bronze screws with cut threads and full bodied diameter shank. Shank diameter is the same as outside of threads to fill clearance hole and create a watertight or waterproof seal. Threaded for 2/3 of the shank.

more >>
Jamestown Distributors
$1.43 See It
#14 Bronze Wood Screws FS 14 x 1-1/2

#14 Robertson (square) drive flat head silicon bronze screws have cut threads and the full-bodied diameter shank desired by boatbuilders.

more >>
Jamestown Distributors
$68.72 See It
#14 Bronze Wood Screws FH 14 x 1-1/2

#14 Flat head slotted bronze wood screws. Silicon bronze screws with cut threads and full bodied diameter shank. Shank diameter is the same as outside of threads to fill clearance hole and create a watertight or waterproof seal. Threaded for 2/3 of the shank.

more >>
Jamestown Distributors
$81.76 See It
#14 Bronze Wood Screws FH 14 x 1-3/4

#14 Flat head slotted bronze wood screws. Silicon bronze screws with cut threads and full bodied diameter shank. Shank diameter is the same as outside of threads to fill clearance hole and create a watertight or waterproof seal. Threaded for 2/3 of the shank.

more >>
Jamestown Distributors
$96.76 See It
#14 S/S Wood Screws FP 14 x 1-3/4

#14 Stainless steel flat head phillips wood screws. Wood screws have coarse and deep threads to better anchor into wood. Flat head screws are used for general fastening when the screw head will be flush with the surface or when it will be countersunk and the hole will be plugged. Phillips drive allows for greater torque application when fastening. Stainless steel provides strong corrosion resistance.

more >>
Jamestown Distributors
$36.93 See It
1/4" x 1/2" Stud Table Base Foot

This threaded glide is for use with table bases. It is the same as those that are included with our table bases. It has a plastic base and and a threaded metal stud which can be adjusted to keep your tables level. 1/4" - 20 thread, 1/2" stud height. 1" base diameter. Sold individually. Most table bases require 4 of these glides. ROY RTB FG

more >>
The WEBstaurant Store
$1.19 See It
1035 - 2.5" 4 Jaw Independent Chuck [14 X 1mm Thread] ...new

Made in the USA!Four-jaw chucks have four advantages over three-jaw chucks. (1) They can be used to hold irregularly shaped parts. (2) With the use of a dial indicator, they can be used to center parts with a great deal of accuracy. (3) They can be used to deliberately hold a part off-center. (4) They can clamp stock tighter. This is a valuable asset when machining cams, crankshafts, and similar parts. The main disadvantage of the 4-jaw independent chuck is that the jaws must be individually se

more >>
eBay
$114.00 See It
Dodge Charger Challenger Racing Lug Nuts 14x1.5 Orange

AUTOINAMICS Store 20PC LIGHT WEIGHT WHEEL RACING LUG NUTS 14X1.5 ORANGE Brand New In Box , Never Used or Installed 20PC VISION Aluminum Racing Light Weight Forged Lug Nuts in 14x1.5 Pitch Thread Pictures Shows 12x1.5 size Only for Illustration Purposes , you will receive the Color and size stated in the Auction description and Title VISION Motorworks Lug Nuts are Manufactured Of Aircraft High Quality A7075-T6 Forged Aluminum. These Lug Nuts are Extremely Strong And Lightweight . Each Lug Nut We

more >>
eBay
$549.99 See It
Pro Series Tunnel 55 x 14 x 14 (EA)

• 2.5mm sizes. • #42 thread count. • Heavy polyethylene synthetic filament fiber. • “No-sag” net system. • Extruded permanent Black color. • UV treated. • 1-3/4" square mesh. • 100% water pr

more >>
eSportsonline
$791.99 See It
CollegiateTunnel 35 x 14 x 12 (EA)

2.0mm sizes. • #24 thread count. • Synthetic filament fiber. • “No-sag” net system. • Extruded permanent Black color. • UV treated. • 1-3/4" square mesh. • 100% water proof. • Ropes around p

more >>
eSportsonline
$506.39 See It
1/4 S/S Lag Screws 1/4 x 1-1/2

1/4 inch stainless steel lag screws are bolts with sharp points and coarse threads for penetrating and gripping wood like a wood screw. Use lag screws to anchor metal or wood to wood in places where a nut or throughbolting will not work.

more >>
Jamestown Distributors
$15.33 See It
SQ14RS-1 L-Ball Rod Ends 14mm Bore:Deep groove ball bearings

L-Ball Rod Ends SQ14RS 14mm Inner Diameter L-Ball Rod Ends SQ14RS, inner diameter is 14mm, the internal thread size is M14x1.5, Here is the interchange designation in every brand: * Item: SQ14RS Bearing * Type: L-Ball Rod Ends * Quantity: One L-Shape Rod end * Static load Capacity: 19 KN Dimensions (mm) d d1 d2 d3 I I2 I3 S1 L L1 L2 D1 D2 D3 S2 14 M14x2 19 38 79.5 21.5 56 17 75 57 8 20 25 22 25

more >>
VXB.com Bearings
$31.37 See It
#14 Bronze Wood Screws FS 14 x 3-1/2

#14 Robertson (square) drive flat head silicon bronze screws have cut threads and the full-bodied diameter shank desired by boatbuilders.

more >>
Jamestown Distributors
$133.98 See It
#14 Bronze Wood Screws FS 14 x 2-1/2

#14 Robertson (square) drive flat head silicon bronze screws have cut threads and the full-bodied diameter shank desired by boatbuilders.

more >>
Jamestown Distributors
$159.39 See It
10/pk Inserts 14x1.25

, The following item you are bidding on is brand new from the factory: DESCRIPTION: Fix-A-Thred is a simple, cost effective system for repairing damaged or worn threads, will also create stronger than original threads. Kits include easy step by step instructions. Inserts and taps are interchangeable with all other Helical thread insert systems. Inserts are made from 18-8 stainless steel. NOTE: Picture is for reference only in most cases. You will get the Part number listed , for the machine lis

more >>
eBay
$8.08 See It
Kit 14x1.2

, The following item you are bidding on is brand new from the factory: DESCRIPTION: Fix-A-Thred is a simple, cost effective system for repairing damaged or worn threads, will also create stronger than original threads. Kits include easy step by step instructions. Inserts and taps are interchangeable with all other Helical thread insert systems. Inserts are made from 18-8 stainless steel. NOTE: Picture is for reference only in most cases. You will get the Part number listed , for the machine lis

more >>
eBay
$88.30 See It
10/pk Inserts 14x1.25

, The following item you are bidding on is brand new from the factory: DESCRIPTION: Fix-A-Thred is a simple, cost effective system for repairing damaged or worn threads, will also create stronger than original threads. Kits include easy step by step instructions. Inserts and taps are interchangeable with all other Helical thread insert systems. Inserts are made from 18-8 stainless steel. NOTE: Picture is for reference only in most cases. You will get the Part number listed , for the machine lis

more >>
eBay
$12.30 See It
Search within results