1 to 20 of  580 products for 2 4 ohms

Result for "2 4 ohms"
Excelon X700-5 50W x 4 + 500W x 1 @ 2 Ohms car Amp

Money-back Guarantee!

100 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 4 ohms,separate variable high-pass filters on front and rear channels,cooling fan

more >>
Crutchfield
$349.99 See It
Rockford Fosgate Punch PBR300X1 Car Amplifier

Car Amplifier - Limited Warranty: 1 Year - Width: 4.3" - Height: 1.5" - Depth: 6.8" - RMS Output Power: 300 W - PMPO Output Power: 924 W - Audio Channels: 1

more >>
Crutchfield
$279.99 See It
M700/5 100W x 4 + 300W x 1 @ 2 Ohms Marine Amp.

Save $90! Was $599.99

75 watts RMS x 4 at 4 ohms + 180 watts RMS at 4 ohms,variable high-pass/low-pass filters,powder coat finish

more >>
Crutchfield
$509.99 See It
Kenwood Excelon X450-4 Car Amplifier

Car Amplifier - Limited Warranty: 2 Year - Width: 12.8" - Height: 2.2" - Depth: 7.4" - RMS Output Power: 450 W - PMPO Output Power: 900 W - Audio Channels: 4

more >>
Crutchfield
$279.99 See It
Eminence 10 Inch Bass Guitar Speaker; 400W Max; 4 Ohms - LEGENDBP102-4

Speaker - RMS Output Power: 200 W - Maximum Frequency Response: 2 kHz - Minimum Frequency Response: 40 Hz - Impedance: 4 Ohm - PMPO Output Power: 400 W - Driver Type: 10" Paper - Sensitivity: 91 dB

more >>
$74.99 Compare Prices at 2 stores
Eminence Professional Omega PRO-15A Woofer

Woofer - Limited Warranty: 7 Year - Country of Origin: United States - RMS Output Power: 800 W - Maximum Frequency Response: 1.70 kHz - Minimum Frequency Response: 51 Hz - Impedance: 8 Ohm - PMPO Output Power: 1600 W

more >>
zZounds.com
$194.99 See It
iNUKE NU12000DSP (3000 X 2 @ 4 Ohms Full DSP)

Power Amplifiers - NOTE: This amplifier requires a 30-amp circuit and a power cable that uses twist-locking Neutrik powerCON 32 A connectors. We highly recommend that you consult a licensed electrician to install this.For credible power at your next gig, put the Behringer iNUKE NU12000DSP power amp in your rack. It serves up to 6,000 watts per channel at a 2 ohm load, yet weighs less than 30 pounds. Class-D amp technology keeps this amplifier running cool, which Sweetwater knows is imperative to reliable amplifier operation. The iNUKE NU12000DSP power amp also features high-performance built-in DSP, 24-bit/96kHz converters, and a USB interface. Perfect for power-hungry subwoofers or any other high-wattage application, you can count on the Behringer iNUKE NU12000DSP power amp.Behringer iNUKE NU12000DSP Power Amplifier at a Glance:Powerful DSP functionalityConvenient USB interfaceHigh Performance TechnologyPowerful DSP functionalityThe Behringer iNUKE NU12000DSP power amp offers DSP to make your setup and gigs easier and better sounding than ever. You can setup and control a delay-line for loudspeakers, crossovers, EQs and dynamics processing all from the front panel, or USB interface built into the NU12000DSP. The front of the unit is lockable to safe guard your settings. You can count on the 24-bit/96kHz converters for huge dynamic range and awesome signal integrity.Convenient USB interfaceThe innovative USB interface allows you complete control over the Behringer iNUKE NU12000DSP power amp. All of the DSP functions can be easily set and tweaked from your laptop. Behringer has free software that gives intuitive and easy to understand interfaces for all the DSP functions. Make your settings more precise than ever.High Performance TechnologyOver the years power amp technology has constantly been evolving, and the Behringer iNUKE NU12000DSP power amp is designed to stay ahead of the curve. Thanks to the revolutionary Class-D technology with "near-zero" thermal buildup, the lightweight NU12000DSP runs very cool, no more massive heat sinks or toroid transformers. The built-in limiter offers overload protection to extend the life of your precious speakers and subs. Active crossover circuits allows you to set the amp up for full-range, or bi-amped operation sending out the lows and highs separately. Behringer iNUKE NU12000DSP Power Amplifier Features:12,000W total - 2 x 6,000W @ 2 ohms, 2 x 3,400W @ 4 ohmsSubwoofer crossover for easy integration with any sound system"Zero-Attack" limiters protect your speakers transparentlyClass-D technology boasts powerful performance in a lightweight, low-heat designUSB interface for comprehensive controlDSP section with EQ, Dynamics, and more24-bit/96kHz converters for outstanding sound qualityTrust your live show to the Behringer iNUKE NU12000DSP!

more >>
Sweetwater
$799.99 See It
Focal JMlab K2 Power 165 KR2 Speaker

Speaker - RMS Output Power: 80 W - Maximum Frequency Response: 20 kHz - Minimum Frequency Response: 70 Hz - Impedance: 2 Ohm - PMPO Output Power: 160 W - Crossover Type: 2-way - Sensitivity: 93 dB

more >>
Crutchfield
$999.99 See It
iNUKE NU1000 (1000W Power Amplifier)

Power Amplifiers - Tired of running out of PA power at gigs? Want more headroom and thump? The Behringer iNUKE NU1000 offers dual 500W power amps at a 2 ohm load, how is that for power? Weighing in at less than 7 pounds, the NU1000 runs cool thanks to the revolutionary Class-D technology with "near-zero" thermal buildup. You can easily integrate this power amp into your rig thanks to the universal XLR / 1/4" combo jacks and speakON outputs. Behringer iNUKE NU1000 Power Amp at a Glance:Performance technologyPerformance technologyOver the years power amp technology has constantly been evolving, and the Behringer iNUKE NU1000 power amp incorporates some of the the newest developments available. Thanks to the revolutionary Class-D technology with "near-zero" thermal buildup, the lightweight NU1000 runs very cool, no more massive heat sinks or toroid transformers. The built-in limiter offers overload protection to extend the life of your precious speakers and subs. Active crossover circuits allows you to set the amp up for full-range, or bi-amped operation sending out the lows and highs separately. Behringer iNUKE NU1000 Features:1,000W total - 2 x 500W @ 2 ohms, 1000 Watts into 4 ohms bridgedSubwoofer crossover"Zero-Attack" limitersUltra-efficient switch-mode power supplyClass-D technologyDrive your speakers using the latest power amp technology with the Behringer iNUKE NU1000DSP.

more >>
Sweetwater
$149.99 See It
D210XST Bass Cabinet, 4 Ohms

For those players who need a portable, high performance rig with even more low end than the XLT, Eden has designed a 2 x 10" cabinet for their XST woofers. This 2 x 10" cabinet handles more power than many 4 x 10" cabs on the market. The low end is full but tight, the mids are open and well defined and the highs are clear and crisp.

more >>
zZounds.com
$799.99 See It
2010 BMW 328i xDrive Coupe (E92) Earthquake Shallow Subwoofer - 2-ohm

Rock your 3 series 06 on - replace your under-seat speakers with this shallow subwoofer. This patented, 8" subwoofers from Earthquake Sound is designed specifically for BMWs and is original equipment on many models outside North America. As a result, it is a direct replacement for the 8" factory speakers under the front seats. A traditional 8" subwoofer requires about 4" of mounting depth, but these Earthquake subs were engineered to reduce the mounting depth required - just 2-1/8" - without reducing the depth or quality of the sound. In fact, the long throw excursion (amount of travel of the ) is more than 1.5"! The result is tight, crisp and deep bass from a very shallow space (less than 0.2 cu. ft.). There are two version of the subwoofer: the version sold here is the SWS-8Xi -- a 2-ohm version for aftermarket amplifiers. If your car had the standard factory sound system, you'll want the SWS-8X -- a 4-ohm version. Both are rated at 300 watts max and feature a high-efficiency, 1.5" voice coil made of aluminum to help to dissipate heat build-up. (I.e. sound integrity is maintained during prolonged use.) Installation is simple, just unbolt the seat and tilt it back (no need to remove any electrical connectors or airbag hardware) to access the factory speaker. The Earthquake sub mounts directly in place of the BMW sub. We include wiring and connectors that allow you to plug the Earthquake sub directly into the BMW factory harness plug. Shouldn't take more than 30 minutes per side. Note: there are two under-seat speakers in your car; these subwoofers are sold individually.

more >>
bavarian-autosport
$129.95 See It
iNUKE NU3000 (3000W Power Amplifier)

Power Amplifiers - Tired of running out of PA power at gigs? Want more headroom and thump? The Behringer iNUKE NU3000 offers dual 1,500W power amps at a 2 ohm load, how is that for power? Weighing in at less than 8 pounds, the NU3000 runs cool thanks to the revolutionary Class-D technology with "near-zero" thermal buildup. You can easily integrate this power amp into your rig thanks to the universal XLR / 1/4" combo jacks and speakON outputs. Behringer iNUKE NU3000 Power Amp at a Glance:Performance technologyPerformance technologyOver the years power amp technology has constantly been evolving, and the Behringer iNUKE NU3000 power amp incorporates some of the the newest developments available. Thanks to the revolutionary Class-D technology with "near-zero" thermal buildup, the lightweight NU3000 runs very cool, no more massive heat sinks or toroid transformers. The built-in limiter offers overload protection to extend the life of your precious speakers and subs. Active crossover circuits allows you to set the amp up for full-range, or bi-amped operation sending out the lows and highs separately. Behringer iNUKE NU3000 Features:3,000W total - 2 x 1,500W @ 2 ohms, 3000 Watts into 4 ohms bridgedSubwoofer crossover"Zero-Attack" limitersUltra-efficient switch-mode power supplyClass-D technologyDrive your speakers using the latest power amp technology with the Behringer iNUKE NU3000DSP.

more >>
Sweetwater
$229.99 See It
Eminence Professional Omega PRO-18A Subwoofer

Woofer - RMS Output Power: 800 W - Maximum Frequency Response: 800 Hz - Minimum Frequency Response: 40 Hz - Impedance: 8 Ohm - PMPO Output Power: 1600 W - Driver Type: 18" Paper Woofer - Sensitivity: 97 dB

more >>
zZounds.com
$209.99 See It
Alpine SPR-50C 5-1/4" Component 2-Way Speaker System

Speaker - RMS Output Power: 100 W - Maximum Frequency Response: 29 kHz - Minimum Frequency Response: 70 Hz - Impedance: 4 Ohm - PMPO Output Power: 300 W - Crossover Type: 2-way - Sensitivity: 87 dB

more >>
Crutchfield
$299.99 See It
Alpine SPR-50 5-1/4" Coaxial 2-Way Speaker Set

Speaker - RMS Output Power: 180 W - Maximum Frequency Response: 29 kHz - Minimum Frequency Response: 70 Hz - Impedance: 4 Ohm - PMPO Output Power: 540 W - Crossover Type: 2-way - Sensitivity: 87 dB

more >>
Crutchfield
$199.99 See It
GM-D8604 100W x 4 Car Amplifier

Money-back Guarantee!

300 watts RMS x 2 bridged at 4 ohms,125 watts RMS x 4 at 1 ohm,full-range Class D amp technology

more >>
Crutchfield
$219.99 See It
AK240SS Stainless Steel 3AK2409C-CMSIN2

Product Features: Housing made from Stainless Steel - uses body as ground points: eliminates more noise Dual Cirrus-Logic CS4398 DAC + XMOS Sound Processor allows Bit-to-Bit Native DSD audio playback Unbalanced and S-PDIF audio output through 3.5mm jack and Balanced audio output through 2.5mm 4-Pole TRRS jack Same user interface of AK240: faster and more intuitive Full external USB/S-PDIF DAC support 256GB of internal flash memory, single micro SD card slot (supports up to 128GB) 3.3" 800x480 AMOLED full touchscreen Stream MQS and DSD audio from your computer and download music straight to the AK240 from hi-res audio content providers via Wi-Fi Upgradable system software via Wi-Fi 10 band adjustable user EQ settings and PRO EQ preset Includes the premium 100 percent genuine Italian leather case from Remy Carriat Product Specifications: Dimensions: 2.6" x 4.2" x 0.69" (Inches) Weight: 6.5 oz DAC: Dual (2) Cirrus-Logic CS4398 with XMOS Sound Processor Display: 3.31" WVGA AMOLED Touch Screen (800x480) Memory: 256GB Internal Flash, Single MicroSD Card Slot (up to 128GB) Supported Audio Formats: WAV/FLAC/MP3/OGG/APE/WMV/AAC/ALAC/AIFF/DSD64 DSD128 (.DSF .DFF)/DXD Bluetooth: 4.0 Wi-Fi: 802.11 b/g/n (2.4GHz) Audio Outputs: Unbalanced Headphone and S-PDIF Out (3.5mm) - 1x, Balanced Output (2.5mm 4-Pole TRRS) - 1x Output Level: 2.1V (Unbalanced Output), 2.3V (Balanced Output) THD+N: 0.0007 percent at 1kHz (Unbalanced), 0.0008 percent at 1kHz (Balanced) Signal to Noise: 116 dB at 1kHz (Unbalanced), 117 dB at 1kHz (Balanced) Freq. Response: +/+- 0.023 dB at 20Hz - 20kHz (Balanced Unbalanced), +/+- 0.3 dB at 10Hz - 70kHz (Balanced Unbalanced) Output Impedance: Unbalanced Out (3.5mm) - 2 Ohms, Balanced Out (2.5mm) - 1 Ohm Jitter: 50 PS

more >>
BuyDig.com
$2,999.00 See It
CompRT 40CWRT672 6-3/4" Dual 2 Ohm Subwoofer

Money-back Guarantee!

injection-molded polypropylene cone with rubber surround,power range: 50-150 watts RMS,frequency response: 30-500 Hz

more >>
Crutchfield
$119.99 See It
2/3/4 Channel Marine Amplifier - M400/4

75 Watts X 4 @ 4 Ohms/ Two Pairs Stereo Inputs/ 12 Hz - 22 kHz (+0, -1dB) Frequency Response/ Damping Factors >150 @ 4 Ohms Per Channel/ 50 Hz And >75 @ 2 Ohm Per Channel/ 100mV - 4V RMS Input Range/ Black Finish/ White Finish

more >>
Abt Electronics
$365.00 See It
DUBa4100 70W x 4 Car Amplifier

Money-back Guarantee!

170 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode),Class AB amp technology,preamp inputs and outputs

more >>
Crutchfield
$119.99 See It
Search within results