1 to 20 of  100 products for 22 caliber rimfire barrel liners brownellsredman 22 16 25 bbl liner

No exact matches found for 22 caliber rimfire barrel liners brownellsredman 22 16 25 bbl liner

100 similar items found

.22 Caliber Rimfire Barrel Liners - Brownells/Redman 1-16 Twist 25'''' Liner, .22lr Rimfire

There are untold thousands of rimfire .22's over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just "loved" by their owners who want them back to their original condition. Plus, a lot of shooters want to convert to one of the .17 rimfires. Brownells .22 Barrel Liners, made by Redman Mfg., are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that's better than - or equal to - an original, new barrel. With the Brownell system, barrel liner installation is not diffic Mfg: Redmans SPECS: 4140 steel. .223" (5.6mm) groove diameter for .22 Short and Long Rifle (LR), 1-16 twist (LR) or 1-20 twist for Short. 5/16" (7.9mm) O.D., 25" Liner - 26-3/8" (67cm) overall, 25" (63.5cm) usable length. 32" Liner - 32" (81.2cm) overall, 30-5/8" (77.7cm)

more >>
Brownells
$34.99 See It
.22 Caliber Rimfire Barrel Liners - Brownells/Redman 1-20 Twist 25'''' Liner, .22 Short Rimfire

There are untold thousands of rimfire .22's over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just "loved" by their owners who want them back to their original condition. Plus, a lot of shooters want to convert to one of the .17 rimfires. Brownells .22 Barrel Liners, made by Redman Mfg., are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that's better than - or equal to - an original, new barrel. With the Brownell system, barrel liner installation is not diffic Mfg: Redmans SPECS: 4140 steel. .223" (5.6mm) groove diameter for .22 Short and Long Rifle (LR), 1-16 twist (LR) or 1-20 twist for Short. 5/16" (7.9mm) O.D., 25" Liner - 26-3/8" (67cm) overall, 25" (63.5cm) usable length. 32" Liner - 32" (81.2cm) overall, 30-5/8" (77.7cm)

more >>
Brownells
$34.99 See It
Ruger 10/22 Sb-X Barrels - Ruger 10/22 Takedown Sb-X Barrel, Black

The SB-X barrel provides the versatility of a short barreled rifle (SBR) without the burden of red tape paperwork. The SB-X barrel allows the addition of a suppressor without drastically increasing the overall length of your firearm. The barrel length of 12.25" would be considered an SBR if not for the shroud which brings the overall length to 16.5". This barrel avoids cumbersome paperwork and provides a shorter, light-weight solution for those who love shooting suppressed. With the standard threaded end, attaching a suppressor is easier than tying your shoe. Includes Tactical Solutions inert suppressor. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Chrome-moly steel liner with 1-16" twist rifling. 16½" (42cm ) O.A.L. including shroud, 12¼" (31.1cm) bore length, .920" (2.3cm) O.D. Accepts muzzle accessories up to 1" (2.5cm) O.D. with ½&quot

more >>
Brownells
$295.99 See It
Ruger 10/22 Target Barrels - 10/22 Target Barrel, Blued

Heavy contour, premium-grade "Bentz" chambered .22 LR barrel provides an immediate improvement in accuracy over your original factory barrel. Close-tolerance Bentz chamber combines the accuracy of a match grade chamber with the reliable cycling of a standard factory chamber. Extra-heavy, untapered .920" O.D. provides maximum stability for greater shot-to-shot consistency. Use with standard or match grade ammunition; not for use with CCI Stinger ammunition. Minor fitting to stock may be required. Chrome-moly models have polished blue finish and are available in an 18" length with dished crown or a 16 ½" length with ½"-28 tpi threaded muzzle for ad Mfg: E.R. Shaw SPECS: 4140 chrome-moly steel, blued, polished finish, or 416 stainless steel (SS), natural matte finish. .920" (2.34cm) O.D. 18" long (45.7cm). Blued barrel w/threaded muzzle 16½" (42cm) long. ½"-28 tpi thread.

more >>
Brownells
$99.99 See It
Ruger 10/22 Sb-X Barrels - Sb-X Barrel

The SB-X barrel provides the versatility of a short barreled rifle (SBR) without the burden of red tape paperwork. The SB-X barrel allows the addition of a suppressor without drastically increasing the overall length of your firearm. The barrel length of 12.25" would be considered an SBR if not for the shroud which brings the overall length to 16.5". This barrel avoids cumbersome paperwork and provides a shorter, light-weight solution for those who love shooting suppressed. With the standard threaded end, attaching a suppressor is easier than tying your shoe. Includes Tactical Solutions inert suppressor. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Chrome-moly steel liner with 1-16" twist rifling. 16½" (42cm ) O.A.L. including shroud, 12¼" (31.1cm) bore length, .920" (2.3cm) O.D. Accepts muzzle accessories up to 1" (2.5cm) O.D. with ½&quot

more >>
Brownells
$269.99 See It
Ruger 10/22 Target Barrels - 10/22 Target Barrel, Ss

Heavy contour, premium-grade "Bentz" chambered .22 LR barrel provides an immediate improvement in accuracy over your original factory barrel. Close-tolerance Bentz chamber combines the accuracy of a match grade chamber with the reliable cycling of a standard factory chamber. Extra-heavy, untapered .920" O.D. provides maximum stability for greater shot-to-shot consistency. Use with standard or match grade ammunition; not for use with CCI Stinger ammunition. Minor fitting to stock may be required. Chrome-moly models have polished blue finish and are available in an 18" length with dished crown or a 16 ½" length with ½"-28 tpi threaded muzzle for ad Mfg: E.R. Shaw SPECS: 4140 chrome-moly steel, blued, polished finish, or 416 stainless steel (SS), natural matte finish. .920" (2.34cm) O.D. 18" long (45.7cm). Blued barrel w/threaded muzzle 16½" (42cm) long. ½"-28 tpi thread.

more >>
Brownells
$119.99 See It
Rimffire Target Conversion Kit - Rimfire Target Conversion Kit, Black

Blowback-operated sub-caliber conversion unit lets you shoot less expensive.22 LR ammunition in any mil-spec 1911 Government model, so you can afford to practice more. Preserves pistol's weight, balance, and overall feel to help you develop specific skills and "muscle memory" to shoot better with full-power ammo. Simply remove the factory slide and barrel, replace them with the conversion unit, and load up the included .22 magazine with premium-grade high-velocity ammunition. Manufactured to the same rigorous quality standards as Kimber's full-power 1911 pistols; slide is precision machined from aluminum billet, with wide front and rear cocking serrations and Kimbe Mfg: Kimber Mfg. SPECS: Aluminum slide, steel barrel, polymer magazine. Available with matte black or silver slide. Fits 1911 Govt model pistols chambered in .45 ACP with 4" or 5" non-ramped barrels and dimensional tolerances that meet U.S. Government specs, including Series 70 and 80 Colt pistols and

more >>
Brownells
$339.00 See It
Conversion Barrels For Glock - 9mm Conversion Barrel For Glock 22

Convert your .40 S&W Glock to shoot 9mm with these simple drop-in conversion barrels from Lone Wolf. Lone Wolf Distributors match grade replacement barrels are manufactured from the highest grade mill select 416 stainless forgings. CNC machined and heat treated, providing a life time of service and unparalleled accuracy at an affordable price. The standard groove and land rifling make this an excellent choice for those who wish to shoot lead, plated or jacketed bullets. PLEASE NOTE: Using this barrel in a Generation 4 Glock may cause malfunctions while using the standard Glock recoil spring assembly. For best results, install a 9mm Glock recoil spring. LWD-229N is intended for Mfg: Lone Wolf Dist. SPECS: Ready to use, pre-fit drop in. No gunsmithing required. Precision machined from heat treated 416R stainless forgings. Oversized lock-up area produces greater shot-to-shot accuracy. Tighter dimensions than the original. Polished feed ramp and bore, diamond t

more >>
Brownells
$104.99 See It
.17 Caliber Centerfire & .920'''' Rimfire Barrel Blanks - Centerfire .17 1-10 Twist #5 Contour Ss

Expertly-crafted, steel barrel blanks are button rifled for extremely-close, inside uniformity from breech to muzzle. Adherence to groove- and uniformity-tolerances of .0005" and .0003" respectively, guarantees these barrel's accuracy. Stress-relieved for ultimate strength and durability. Rimfire blanks are .920" diameter; centerfire are 1.250". Available in Chrome Moly and Stainless Steel. Mfg: Shilen SPECS: 4140 chrome moly (CM) or 416 stainless steel (SS). Centerfire: 1.250" (3.2cm) O.D. Unturned - Approximately 9 lb. (4 kg); Contour 2 - 2¾ lb. (1.2 kg); Contour 4 - 3¾ lb. (1.7 kg); Contour 5 - 4¼ lb. (1.9 kg) Rimfire: .920" (23mm) O.D. 3½ lb. (1.6 kg)

more >>
Brownells
$271.99 See It
Carbon Fiber Thm Barrels - Carbon Fiber Thm Barrel W/Comp, Black Ends

Carbon fiber and stainless steel construction Matte black finish at ends Forward blow compensator reduces recoil Designed to fit Ruger 10/22 rifle Drilled and tapped to accept Volquartsen barrel mounted scope mount Length: 16.5 inches Weight: 32 ouncesThe 10/22 Carbon Fiber THM Barrel with Compensator features a forward blow compensator to reduce recoil and a tapered honed match barrel and chamber. This lightweight barrel is made of woven carbon fiber to increase rigidity and reduce weight. The stainless steel ends are finished in matte black and this barrel is drilled and tapped to accept Volquartsen barrel mounted scope mount. Designed to fit a Ruger Mfg: Volquartsen SPECS: Woven carbon fiber and stainless steel construction, Matte black finish at ends, 32 hole compensator, Length: 16.5 inches, Weight: 23 oz., Designed for Ruger 10/22, Drilled and tapped for barrel mounted scope mount.

more >>
Brownells
$349.99 See It
Ar-15/M16 5.56 Carbine Barrels - 16'''' Ar Barrel Threaded 1:7

Black nitride, carbine-length barrels are chambered for 5.56mm NATO and have 1-7" rifling that helps stabilize heavy bullets. Exterior is sized to accept a .750" gas block, with the gas port positioned for a carbine-length gas system. Threaded ½"-28 tpi muzzle accepts a standard AR-15/M16 flash suppressor or muzzle brake. Pre-installed barrel extension has M4 feed ramp cuts that aid in reliable feeding. Fluted model has distinctive diamond cuts on the exterior that reduce weight, enhance rigidity, and give your rifle a unique custom look. Also provides extra surface area to aid in cooling the barrel. Mfg: Yankee Hill Machine Co., Inc. SPECS: 4140 carbon steel, heat treated to Rc 25-32, matte black nitride finish. 16.5" OAL. .750" O.D. at gas block. Muzzle threaded ½" x 28. 1-7" rifling twist rate.

more >>
Brownells
$194.99 See It
Ar-15/M16 300 Blk S2w Hammer Forged Barrels - 16'''' S2w Carbine Length 300 Blk Barrel, 1-8 Twist

These barrels are cold hammer-forged from high-grade chromium-molybdenum-vanadium alloy steel for exceptional strength and accuracy potential-like a high-end match rifle barrel. Magnetic particle inspection (MPI) ensures there are no internal flaws in the metal. Durable manganese phosphate finish give excellent resistance to surface wear. Barrel extension has M4-type feed ramps. Choose caliber, profile, length, and gas block/sight base option to fit your needs. Strength 2 Weight 300 Blackout barrels features a 1-8 twist, and have a heavier profile, that tapers down towards the muzzle. This profile provides superior strength and rigidity. OD at gas block is .750". Mfg: Daniel Defense

more >>
Brownells
$289.00 See It
Ar-15/M16 5.56 Hammer Forged Barrels - 16'''' Lightweight Carbine 5.56 Barrel, 1-7 Twist

These barrels are cold hammer-forged from high-grade chromium-molybdenum-vanadium alloy steel for exceptional strength and accuracy potential-like a high-end match rifle barrel. Magnetic particle inspection (MPI) ensures there are no internal flaws in the metal. Durable manganese phosphate finish give excellent resistance to surface wear. Barrel extension has M4-type feed ramps. Choose caliber, profile, length, and Old Style .625" gas block/sight base option to fit your needs. 5.56x45 barrels come in 10.5", 14.5" and 16" lengths, with the shorter barrels featuring carbine length gas system. Barrels are available in lightweight or government contours, and M4 fo Mfg: Daniel Defense

more >>
Brownells
$289.00 See It
Ruger 10/22 Fluted Aluminum Target Barrel - Threaded Fluted Barrel, Mb

Drop-in, .22 LR target barrel features a premium, button-rifled, chrome moly liner installed in a lightweight aluminum shell to achieve match grade accuracy and reduced weight. Deep, CNC machined flutes help keep barrel weight to 1 lb., plus increase rigidity and overall surface area for improved heat dissipation. Hardcoat anodized surface delivers added strength and abrasion resistance. Versatile, 1-16" twist rifling stabilizes a wide variety of hunting and match ammunition. Installation may require alteration to factory stock. Standard models feature a .920" diameter, straight bull barrel. Threaded model adds a threaded ½"-28 tpi threaded muzzle for attaching a fla Mfg: Tactical Solutions, Llc SPECS: Barrel Shell - Aircraft grade aluminum, anodized, gloss black (GB), matte black (MB), matte silver (MS), or O.D. Green finish. Non-tapered, bull bbl. contour. Liner - Chrome moly, .22 LR, 1-16" twist. 16½" (41.9cm) long x .920" (2.34cm) O.D. 1 lb. (.45 kg) wt. Fits

more >>
Brownells
$259.99 See It
Coated Rod Adapters - Adapter, Smba Fits .22-.26 Caliber Rods

17A, 5-40 male/8-32 female converts .17 cal. Dewey rods to accept 8-32 rimfire accessories. SMBA, (.22-.26 cal.) adapters, and LGBA, (.27 cal. and up) adapters convert male end on Coated Rods to 8-32 female thread for use with all standard 8-32 accessories. LGBP, female/female, converts 12-28, male thread, Dewey .50 BMG and Large Bore rods to accept standard 10-32 blackpowder accessories. SBA, female/female, lets 30C series Coated Rods accept 5/16"-27 accessories. LGPH allows .30 cal. Parker-Hale rod to accept 8-32 brushes. 22A, male/male, 8-32 to 8-36 for .22 CF rods, adapts 8-32, female thread, civilian rods to accept 8-36 Dewey coated rod jags. 22SA, male/female, adapts 8-32 Mfg: Dewey SPECS: Machined brass. 22A, 22M, and 30A sold as 2-Pak.

more >>
Brownells
$2.49 See It
Ruger 10/22 Fluted Aluminum Target Barrel - Threaded Fluted Barrel, Od Green

Drop-in, .22 LR target barrel features a premium, button-rifled, chrome moly liner installed in a lightweight aluminum shell to achieve match grade accuracy and reduced weight. Deep, CNC machined flutes help keep barrel weight to 1 lb., plus increase rigidity and overall surface area for improved heat dissipation. Hardcoat anodized surface delivers added strength and abrasion resistance. Versatile, 1-16" twist rifling stabilizes a wide variety of hunting and match ammunition. Installation may require alteration to factory stock. Standard models feature a .920" diameter, straight bull barrel. Threaded model adds a threaded ½"-28 tpi threaded muzzle for attaching a fla Mfg: Tactical Solutions, Llc SPECS: Barrel Shell - Aircraft grade aluminum, anodized, gloss black (GB), matte black (MB), matte silver (MS), or O.D. Green finish. Non-tapered, bull bbl. contour. Liner - Chrome moly, .22 LR, 1-16" twist. 16½" (41.9cm) long x .920" (2.34cm) O.D. 1 lb. (.45 kg) wt. Fits

more >>
Brownells
$259.99 See It
Ar-15/M16 5.56 Hammer Forged Barrels - 16'''' Lightweight Mid-Length 5.56 Barrel, 1-7 Twist

These barrels are cold hammer-forged from high-grade chromium-molybdenum-vanadium alloy steel for exceptional strength and accuracy potential-like a high-end match rifle barrel. Magnetic particle inspection (MPI) ensures there are no internal flaws in the metal. Durable manganese phosphate finish give excellent resistance to surface wear. Barrel extension has M4-type feed ramps. Choose caliber, profile, length, and Old Style .625" gas block/sight base option to fit your needs. 5.56x45 barrels come in 10.5", 14.5" and 16" lengths, with the shorter barrels featuring carbine length gas system. Barrels are available in lightweight or government contours, and M4 fo Mfg: Daniel Defense

more >>
Brownells
$289.00 See It
Ar-15/M16 5.56 Hammer Forged Barrels - 16'''' Government Mid-Length 5.56 Barrel, 1-7 Twist

These barrels are cold hammer-forged from high-grade chromium-molybdenum-vanadium alloy steel for exceptional strength and accuracy potential-like a high-end match rifle barrel. Magnetic particle inspection (MPI) ensures there are no internal flaws in the metal. Durable manganese phosphate finish give excellent resistance to surface wear. Barrel extension has M4-type feed ramps. Choose caliber, profile, length, and Old Style .625" gas block/sight base option to fit your needs. 5.56x45 barrels come in 10.5", 14.5" and 16" lengths, with the shorter barrels featuring carbine length gas system. Barrels are available in lightweight or government contours, and M4 fo Mfg: Daniel Defense

more >>
Brownells
$289.00 See It
Replacement Liners For Basket Trucks By Royal - Cotton Canvas Liner - 16 Bushel Capacity - Natural

Complete with nylon rope and a double row of rust resistant grommets in reinforced hem. Lace onto existing truck frames. Fits all makes and models of comparable size trucks with either permanent or removable liners. Ships small package carrier.

more >>
C&H Distributors
$87.80 See It
Ruger 10/22 Fluted Aluminum Target Barrel - Threaded Fluted Barrel, Ms

Drop-in, .22 LR target barrel features a premium, button-rifled, chrome moly liner installed in a lightweight aluminum shell to achieve match grade accuracy and reduced weight. Deep, CNC machined flutes help keep barrel weight to 1 lb., plus increase rigidity and overall surface area for improved heat dissipation. Hardcoat anodized surface delivers added strength and abrasion resistance. Versatile, 1-16" twist rifling stabilizes a wide variety of hunting and match ammunition. Installation may require alteration to factory stock. Standard models feature a .920" diameter, straight bull barrel. Threaded model adds a threaded ½"-28 tpi threaded muzzle for attaching a fla Mfg: Tactical Solutions, Llc SPECS: Barrel Shell - Aircraft grade aluminum, anodized, gloss black (GB), matte black (MB), matte silver (MS), or O.D. Green finish. Non-tapered, bull bbl. contour. Liner - Chrome moly, .22 LR, 1-16" twist. 16½" (41.9cm) long x .920" (2.34cm) O.D. 1 lb. (.45 kg) wt. Fits

more >>
Brownells
$259.99 See It
Search within results
  • Find by Price
    • $ to $