1 to 20 of  108 products for 22 pistols

Result for "22 pistols"
1911 22 Buckmark Black Ballistic Nylon Zippered Pistol Rug

FREE SHIPPING Orders $50+

This rug fits both 1911-22 pistols and Buck Mark pistols (up to a 5.5-inch barrel). The outer pocket secures three spare magazines and the whole case is composed of a tough ballistic nylon construction which is padded to protect the pistol.

more >>
Overstock Main
$32.99 See It
Lasergrip For Full size Glock Pistols

FREE SHIPPING Orders $50+

Lasergrip is ideal for Glock models 17, 17L, 22, 24, 31, 34, 35 and 37Grip-integrated system builds the laser, activation switch and power source right into the gripHolding the gun in a normal firing grip presses the activation switch

more >>
Overstock Main
$199.00 See It
10/22 Chicago Furniture Conversaion Kits - Conversion Kit & Drum Magazine

Easy-to-install kit gives your Ruger 10/22 the instantly recognizable appearance and handling of the classic, 1920-30’s submachine gun. For a fraction of the cost of an original, you can shoot a look-alike using plentiful .22 LR ammunition without putting wear on a historic heirloom. Kit includes all mounting hardware and tools, no gunsmithing required. Simply remove the 10/22’s barreled action from the factory stock, and install the kit components following the step-by-step instructions. The action fits securely into the kit’s precision-machined, billet aluminum chassis—no drilling or permanent alterations to the action are required, so you can return it to the origi Mfg: Scottwerx, Llc. SPECS: Aluminum, powder coat finish, black, semi-gloss; walnut, matte finish. Kit includes receiver chassis, buttstock, pistol grip, forend grip, muzzle tip, front grip bracket, mounting hardware, and instructions. Available with or without Pro-Mag 50-round drum magazine. Spare magazines available s

more >>
Brownells
$414.99 See It
Rimffire Target Conversion Kit - Rimfire Target Conversion Kit, Black

Blowback-operated sub-caliber conversion unit lets you shoot less expensive.22 LR ammunition in any mil-spec 1911 Government model, so you can afford to practice more. Preserves pistol’s weight, balance, and overall feel to help you develop specific skills and “muscle memory” to shoot better with full-power ammo. Simply remove the factory slide and barrel, replace them with the conversion unit, and load up the included .22 magazine with premium-grade high-velocity ammunition. Manufactured to the same rigorous quality standards as Kimber’s full-power 1911 pistols; slide is precision machined from aluminum billet, with wide front and rear cocking serrations and Kimbe Mfg: Kimber Mfg. SPECS: Aluminum slide, steel barrel, polymer magazine. Available with matte black or silver slide. Fits 1911 Govt model pistols chambered in .45 ACP with 4” or 5” non-ramped barrels and dimensional tolerances that meet U.S. Government specs, including Series 70 and 80 Colt pistols and

more >>
Brownells
$339.99 See It
Ruger® Mark I/Ii/Iii Black Max Holster - High-Rider Holster

Rugged and lightweight polymer composite holster holds a Ruger Mark series .22 LR pistol with or without optics. Reversible design allows the holster to be worn on the left or right side. Adjustable retention system accommodates almost any version of the Mark series. Fully covered triggerguard for added safety. Slick interior ensures a smooth, fast presentation, and reholstering. Front cut opening provides clearance for optics and lets the barrel clear the holster quickly during the draw, so you can get on target faster. High-Ride model sits right at the hip. Low-Ride model sits approximately 2" below the hip. Mfg: Tactical Solutions, Llc SPECS: Thermo-molded polymer, black. Fits belts up to 2" wide. Fits Ruger Mark I, Mark II, Mark III, & 22/45 .22 LR pistols.

more >>
Brownells
$26.99 See It
10/22 Chicago Furniture Conversaion Kits - Conversion Kit, Only

Easy-to-install kit gives your Ruger 10/22 the instantly recognizable appearance and handling of the classic, 1920-30’s submachine gun. For a fraction of the cost of an original, you can shoot a look-alike using plentiful .22 LR ammunition without putting wear on a historic heirloom. Kit includes all mounting hardware and tools, no gunsmithing required. Simply remove the 10/22’s barreled action from the factory stock, and install the kit components following the step-by-step instructions. The action fits securely into the kit’s precision-machined, billet aluminum chassis—no drilling or permanent alterations to the action are required, so you can return it to the origi Mfg: Scottwerx, Llc. SPECS: Aluminum, powder coat finish, black, semi-gloss; walnut, matte finish. Kit includes receiver chassis, buttstock, pistol grip, forend grip, muzzle tip, front grip bracket, mounting hardware, and instructions. Available with or without Pro-Mag 50-round drum magazine. Spare magazines available s

more >>
Brownells
$354.99 See It
Pistol Modular Grip - Roni Recon For Glock® Gen 3/4 17,19,22,23,25, 31,32

The RONI RECON provides you a better grip, stability & platform to add many accessories or sighting options. Now you can use your pistol for a greater range, faster aiming, and better accuracy. RONIRBA92 fits Beretta 92s made in the USA without rails. RONIRBI92 fits Beretta 92s made in Italy without rails. RONIRG2-9 fits Glock Gen3 and Gen4 models 17, 19, 22, 23, 25, 31 and 32. RONIRSI1 fits the Sig Sauer P226 with rail. RONIRSP1 fits the Springfield Armory original XD model only with 4 inch barrel in 9mm only and does not fit XDM models. Features of the Roni Recon include: No pistol disassembly required -just "drop" it into the shell. 24cm upper flattop rail - Mfg: Command Arms Acc SPECS: Made of Aluminum + Polymer

more >>
Brownells
$314.99 See It
10/22 Trx Aluminum Adjustable Chassis - T22 Trx Sport Chassis Kit

FEATURES: Built in troy spring loaded battlesights Ultra light design Pistol grip Adjustable stock Free floating barrel Compatible with standard and bull barrels Compatible with standard TRX attachments Full length top picatinny rail  Aluminum handguard and receiver housing Accepts standard ar15 commercial stocks Front sight is adjustable for elevation Rear sight is adjustable for windage BENEFITS: Modular design allows for unlimited mounting options Simple installation of 10/22 into chassis Full length rail allows for a wide variety of optics choices, not normally possible on a 10/22 Free flo Mfg: Troy Industries, Inc.

more >>
Brownells
$399.99 See It
Tsg-22™ Conversion Kits For Glock® - 17/22 Standard Conversion W/ 15rd Magazine

The TSG-22 Gen 2 Conversion Kit quickly and easily converts any generation of Glock® models 17&22 or 19&23 into a .22LR pistol. Machined from a solid piece of heat treated 4140 steel, the TSG-22 maintains a similar weight and feel to your factory Glock®,allowing realistic shooting and training. A nitride surface treatment offers superb resistance to wear and surface friction. The TSG-22 fits comfortably onto your Glock frame in just seconds. Comes with a 10 or 15 round magazine. Additional Tactical Solutions magazines are also available through Brownells (100-009-462 & 100-009-463). Generation 2 Conversion Kit: Barrel can be removed like a factory Glock&reg Mfg: Tactical Solutions, Llc SPECS: Slide – Heat-treated 4140 carbon steel, black nitride finish. Magazine – Polymer, black. 10-rd capacity. The TSG-22² 17/22 easily fits all generations of the following Glock® models: 17, 22, 34, 35, & 37 and the TSG-22² 19/23 easily fits all generations of the

more >>
Brownells
$379.99 See It
Tsg-22™ Conversion Kits For Glock® - 19/23 Standard Conversion W/ 15rd Magazine

The TSG-22 Gen 2 Conversion Kit quickly and easily converts any generation of Glock® models 17&22 or 19&23 into a .22LR pistol. Machined from a solid piece of heat treated 4140 steel, the TSG-22 maintains a similar weight and feel to your factory Glock®,allowing realistic shooting and training. A nitride surface treatment offers superb resistance to wear and surface friction. The TSG-22 fits comfortably onto your Glock frame in just seconds. Comes with a 10 or 15 round magazine. Additional Tactical Solutions magazines are also available through Brownells (100-009-462 & 100-009-463). Generation 2 Conversion Kit: Barrel can be removed like a factory Glock&reg Mfg: Tactical Solutions, Llc SPECS: Slide – Heat-treated 4140 carbon steel, black nitride finish. Magazine – Polymer, black. 10-rd capacity. The TSG-22² 17/22 easily fits all generations of the following Glock® models: 17, 22, 34, 35, & 37 and the TSG-22² 19/23 easily fits all generations of the

more >>
Brownells
$379.99 See It
Pistol Modular Grip - Roni Recon Beretta Model 92 Italy

The RONI RECON provides you a better grip, stability & platform to add many accessories or sighting options. Now you can use your pistol for a greater range, faster aiming, and better accuracy. RONIRBA92 fits Beretta 92s made in the USA without rails. RONIRBI92 fits Beretta 92s made in Italy without rails. RONIRG2-9 fits Glock Gen3 and Gen4 models 17, 19, 22, 23, 25, 31 and 32. RONIRSI1 fits the Sig Sauer P226 with rail. RONIRSP1 fits the Springfield Armory original XD model only with 4 inch barrel in 9mm only and does not fit XDM models. Features of the Roni Recon include: No pistol disassembly required -just "drop" it into the shell. 24cm upper flattop rail - Mfg: Command Arms Acc SPECS: Made of Aluminum + Polymer

more >>
Brownells
$314.99 See It
Grip Frame Insert For Glock® - Glock Gen 4 Grip Frame Instert, Subcompact

Plastic plug installs in the bottom rear cavity of the frame to fill the opening found in Glock® pistols. Front “lip” forms a tight, flush bond with the mag well to help make sure the mag goes where it should, smoothly. Keeps dirt and debris from finding its way inside the pistol and gives a clean, smooth look. Uses the lanyard hole for retention to snap firmly into place. Glock® Plus Zero fits Models 17 through 25, 31, 32, 34, 35, 37, and 38. Gen 4 Grip Frame Inserts allow for use of the factory interchangeable backstraps. Gen 4 Full & Mid model fits Generation 4 Glock® models 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact model fits Generation 4 Glo Mfg: Pearce Grip SPECS: Impact-resistant plastic, black. One per pack.

more >>
Brownells
$4.98 See It
Ruger® Mark I/Ii/Iii Black Max Holster - Low-Rider Holster

Rugged and lightweight polymer composite holster holds a Ruger Mark series .22 LR pistol with or without optics. Reversible design allows the holster to be worn on the left or right side. Adjustable retention system accommodates almost any version of the Mark series. Fully covered triggerguard for added safety. Slick interior ensures a smooth, fast presentation, and reholstering. Front cut opening provides clearance for optics and lets the barrel clear the holster quickly during the draw, so you can get on target faster. High-Ride model sits right at the hip. Low-Ride model sits approximately 2" below the hip. Mfg: Tactical Solutions, Llc SPECS: Thermo-molded polymer, black. Fits belts up to 2" wide. Fits Ruger Mark I, Mark II, Mark III, & 22/45 .22 LR pistols.

more >>
Brownells
$26.99 See It
Tsg-22™ Conversion Kits For Glock® - 19/23 Standard Conversion W/ 10rd Magazine

The TSG-22 Gen 2 Conversion Kit quickly and easily converts any generation of Glock® models 17&22 or 19&23 into a .22LR pistol. Machined from a solid piece of heat treated 4140 steel, the TSG-22 maintains a similar weight and feel to your factory Glock®,allowing realistic shooting and training. A nitride surface treatment offers superb resistance to wear and surface friction. The TSG-22 fits comfortably onto your Glock frame in just seconds. Comes with a 10 or 15 round magazine. Additional Tactical Solutions magazines are also available through Brownells (100-009-462 & 100-009-463). Generation 2 Conversion Kit: Barrel can be removed like a factory Glock&reg Mfg: Tactical Solutions, Llc SPECS: Slide – Heat-treated 4140 carbon steel, black nitride finish. Magazine – Polymer, black. 10-rd capacity. The TSG-22² 17/22 easily fits all generations of the following Glock® models: 17, 22, 34, 35, & 37 and the TSG-22² 19/23 easily fits all generations of the

more >>
Brownells
$379.99 See It
Sirt Performer Training Pistol With Magazine - Sirt Training Pistol Red Slide W/Magazine

Training pistol with the look, feel and approximate weight of a Glock 17/22 provides enhanced dry-fire practice. The Shot Indicating Resetting Trigger (SIRT) system assists shooters in developing proper grip and trigger control without spending money on ammunition. Auto-resetting trigger activates two red lasers – one when pressure is applied to the trigger to serve as a take-up/trigger prep indicator (may be deactivated), while the other displays “shot” placement. Features standard sights and a functional magazine release that enables users to practice reloads using the included weighted training magazine. Mfg: Next Level Training

more >>
Brownells
$439.00 See It
Grip Frame Insert For Glock® - Glock Gen 4 Grip Frame Instert, Mid & Full

Plastic plug installs in the bottom rear cavity of the frame to fill the opening found in Glock® pistols. Front “lip” forms a tight, flush bond with the mag well to help make sure the mag goes where it should, smoothly. Keeps dirt and debris from finding its way inside the pistol and gives a clean, smooth look. Uses the lanyard hole for retention to snap firmly into place. Glock® Plus Zero fits Models 17 through 25, 31, 32, 34, 35, 37, and 38. Gen 4 Grip Frame Inserts allow for use of the factory interchangeable backstraps. Gen 4 Full & Mid model fits Generation 4 Glock® models 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact model fits Generation 4 Glo Mfg: Pearce Grip SPECS: Impact-resistant plastic, black. One per pack.

more >>
Brownells
$4.98 See It
Grip Frame Insert For Glock® - Subcompact Grip Frame Insert, Model 26/27/33/39

Plastic plug installs in the bottom rear cavity of the frame to fill the opening found in Glock® pistols. Front “lip” forms a tight, flush bond with the mag well to help make sure the mag goes where it should, smoothly. Keeps dirt and debris from finding its way inside the pistol and gives a clean, smooth look. Uses the lanyard hole for retention to snap firmly into place. Glock® Plus Zero fits Models 17 through 25, 31, 32, 34, 35, 37, and 38. Gen 4 Grip Frame Inserts allow for use of the factory interchangeable backstraps. Gen 4 Full & Mid model fits Generation 4 Glock® models 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact model fits Generation 4 Glo Mfg: Pearce Grip SPECS: Impact-resistant plastic, black. One per pack.

more >>
Brownells
$4.98 See It
Ruger® Mark Ii/Iiii™ & 22/45 Target Trigger - Ruger Target Trigger, Black

Precision machined from billet for precise fit to cut down trigger weight and eliminate the heavy pressure required to move the factory part. Helps produce a more consistent pull for improved accuracy. Stop screw is adjustable for overtravel and pretravel with the gun fully assembled, so you get a no-creep pull. Ultra-smooth shoe offers more contact with the trigger finger. Available in Black anodized aluminum or polished stainless steel (SS). Includes trigger spring and trigger spring plunger. Mfg: Volquartsen SPECS: Aluminum, anodized, black, or stainless steel, natural silver finish. .354" (9mm) wide trigger shoe face. Fits Ruger Mark I, Mark II, Mark III™, and 22/45™ pistols.

more >>
Brownells
$32.99 See It
Ruger® Mark Ii/Iiii™ & 22/45 Target Trigger - Ruger Target Trigger, Ss

Precision machined from billet for precise fit to cut down trigger weight and eliminate the heavy pressure required to move the factory part. Helps produce a more consistent pull for improved accuracy. Stop screw is adjustable for overtravel and pretravel with the gun fully assembled, so you get a no-creep pull. Ultra-smooth shoe offers more contact with the trigger finger. Available in Black anodized aluminum or polished stainless steel (SS). Includes trigger spring and trigger spring plunger. Mfg: Volquartsen SPECS: Aluminum, anodized, black, or stainless steel, natural silver finish. .354" (9mm) wide trigger shoe face. Fits Ruger Mark I, Mark II, Mark III™, and 22/45™ pistols.

more >>
Brownells
$37.99 See It
Ruger 22/45 Mkii/Mkiii 10rd 22lr Magazine With Extended Pad - Mag22/45 Ruger Mkii & Mkiii 22/45 Magazine With Extended Pad

Extended base pad promotes proper magazine orientation and seating Base pad is machined from aluminum Base pad fits factory Ruger MKII and MKIII magazines Competition magazine comes with extended base pad preinstalled Magazine fits both MKII and MKIII pistols Magazine has a steel construction, blued finish and polymer follower Mfg: Majestic Arms, Ltd. SPECS: Fits – Ruger 22/45 MKII and MKIII. Base pad – aluminum construction. Magazine – matte blue, steel construction.

more >>
Brownells
$34.95 See It