1 to 12 of  12 products for 220 volt thermostat

Result for "220 volt thermostat"
0198-2 turbo-dri jr. surface mounted high-speed hand dryer, 220-240 volt, white

ASI 0198-2 turbo-dri jr. hand dryer Quick drying less than 12 seconds Operates automatically using infrared sensor; Auto-resetting thermostat; 60-second automatic shut off Electrical Specifications: Motor: 1 HP, 7-18 krpm, adjustable, brush type, dual ball bearings Voltage: 240 VAC, 50/60 Hz. 1.6 kW Air Output: 68 CFM max - Temp: 140° F (60° C) Output Air Speed: 156 mph (229 ft/s) [70 m/s {251 km/h}] - 224 mph (329 ft/s) [100 m/s {361 km/h}] Heater: 400 - 900 Watts Current: 5.2 Amps @ 240 VAC; Dry Time: Under 12 secondsASI 0198 Hand Dryer Spec Sheet

more >>
ProDryers.com
$346.50 See It
0197-2-93 turbo-dri high speed hand dryer, satin brushed stainless steel, 220-240 volt, surface mounted

ASI 0197-2-93 turbo-dri high speed hand dryer FEATURES: Quick drying less than 12 seconds; Operates automatically using infrared sensor; Auto-resetting thermostat; 60-second automatic shut off. Electrical Specifications: Motor: 1 HP, 7-18 krpm, adjustable, brush type, dual ball bearings Voltage: 240 VAC, 50/60 Hz. 1.6 kW Air Output: 68 CFM max - Temp: 140° F (60° C) Output Air Speed: 156 mph (229 ft/s) [70 m/s {251 km/h}] - 224 mph (329 ft/s) [100 m/s {361 km/h}] Heater: 400 - 900 Watts Current: 7.3 Amps @ 240 VAC Dry Time: Under 12 seconds DAILY USAGE COST Average drying time of 12 seconds at maximum output settings ¢ Average of 200 uses / day ¢ Average 12 seconds / use ¢ Average daily usage is 2400 seconds ¢ Equals 0.666666667 hours ¢ Energy used in operation 1.47 Kw ¢ $0.11 / KW Hour Cost per day = $0.108 Sound Pressure (Decibel Level) Min: 65 dB-A @ 2M Max: 78 dB-A @ 2MASI 0197 Hand Dryer Spec Sheet

more >>
ProDryers.com
$451.50 See It
20199-2 roval recessed hand dryer, 220-240 volt, high speed, fast 15 second dry

ASI 20199-2 roval recessed hand dryer This high performing hand dryer, with a drying time of less than 15 seconds, has a cover made of 18 gauge stainless steel and uniquely complements the Roval Collection with its bowed face and gently radiused edges. 5-year warranty. FEATURES: ¢Quick drying less than 15 seconds ¢Operates automatically using infrared sensor ¢Auto-resetting thermostat ¢60-second automatic shut off ¢Cover fabricated of heavy-duty, one-piece-formed stainless steel Electrical Specifications: Motor: 2/3 HP, 29 krpm, Brush type, dual ball bearings Voltage: 240 VAC, 50/60 Hz. 1.6 kW Air Output: 60 CFM max - Temp: 131º F ± 5@ 77º F (55o C ±2.8 @ 25o C) ambient room temp Output Air Speed: 201 mph (295 ft/s) [90 m/s {324 km/h}] Heater: 500 Watts Current: 4.2 Amps @ 240 VAC Dry Time: Under 15 seconds Sound Pressure (Decibel Level) Max: 69.1 dB-A @ 2M View Spec Sheet

more >>
ProDryers.com
$527.09 See It
0198-2-93 turbo-dri jr. surface mounted high-speed hand dryer, satin stainless steel, 220-240 volt

ASI 0198-2-93 turbo-dri jr. hand dryer Quick drying less than 12 seconds Operates automatically using infrared sensor Auto-resetting thermostat 60-second automatic shut off Electrical Specifications: Motor: 1 HP, 7-18 krpm, adjustable, brush type, dual ball bearings Voltage: 120 VAC, 50/60 Hz. 1.6 kW Air Output: 68 CFM max - Temp: 140° F (60° C) Output Air Speed: 156 mph (229 ft/s) [70 m/s {251 km/h}] - 224 mph (329 ft/s) [100 m/s {361 km/h}] Heater: 400 - 900 Watts Current: 14.6 Amps @ 120 VAC; Dry Time: Under 12 seconds DAILY USAGE COST Average drying time of 12 seconds at maximum output settings ¢ Average of 200 uses / day ¢ Average 12 seconds / use ¢ Average daily usage is 2400 seconds ¢ Equals 0.666666667 hours ¢ Energy used in operation 1.47 Kw ¢ $0.11 / KW Hour Cost per day = $0.108 Sound Pressure (Decibel Level) Min: 65 dB-A @ 2M Max: 78 dB-A @ 2M ASI 0198 Hand Dryer Spec Sheet

more >>
ProDryers.com
$364.35 See It
0197-2-92 turbo-dri high speed hand dryer, bright stainless steel, 220-240 volt, surface mounted

ASI 0197-2-92 turbo-dri high speed hand dryer FEATURES: Quick drying less than 12 seconds; Operates automatically using infrared sensor; Auto-resetting thermostat; 60-second automatic shut off. Electrical Specifications: Motor: 1 HP, 7-18 krpm, adjustable, brush type, dual ball bearings Voltage: 240 VAC, 50/60 Hz. 1.6 kW Air Output: 68 CFM max - Temp: 140° F (60° C) Output Air Speed: 156 mph (229 ft/s) [70 m/s {251 km/h}] - 224 mph (329 ft/s) [100 m/s {361 km/h}] Heater: 400 - 900 Watts Current: 7.3 Amps @ 240 VAC Dry Time: Under 12 seconds DAILY USAGE COST Average drying time of 12 seconds at maximum output settings ¢ Average of 200 uses / day ¢ Average 12 seconds / use ¢ Average daily usage is 2400 seconds ¢ Equals 0.666666667 hours ¢ Energy used in operation 1.47 Kw ¢ $0.11 / KW Hour Cost per day = $0.108 Sound Pressure (Decibel Level) Min: 65 dB-A @ 2M Max: 78 dB-A @ 2M ASI 0197 Hand Dryer Spec Sheet

more >>
ProDryers.com
$451.50 See It
220 Volts (International Use Only) Nemco 8300 Countertop Hot Dog Steamer with Low Water Indicator Light

A fantastic addition to any snack bar, concession stand, or convenience store, this Nemco 8300 hot dog steamer accommodates up to 150 6" hot dogs and 30 hot dog buns at a time! This unit features a 7 1/2 qt. water reservoir with a drain for easy cleanup at the end of the night as well as a low water indicator light to ensure that the reservoir never runs dry. An adjustable thermostat and lighted power switch give you complete control over the cooking process, while its short 20 minute preheat time means that you'll be able to start producing top notch hot dogs right away to beat the lunch rush. Plus, its compact footprint is ideal for operations with limited counter space. With colorful graphics to catch the eyes of passing customers, this hot dog steamer will become a fan favorite in no time! The front, top, sides, and inside of this unit are made entirely of brushed 304 stainless steel, which is touted for its corrosion-resistance. Its back panel and front sliding doors are both made of tempered glass to prevent breakage and promote product visibility. Select voltage. It comes with a 6' cord and NEMA 5-15P plug. UL and NSF Listed. Made in the U.S.A. Please consult the Specification Sheet for additional details and installation information. Overall Dimensions: Left to Right: 13 1/2" Front to Back: 15" Height: 18" 8300-220 From Nemco

more >>
The WEBstaurant Store
$499.80 See It
6103A-ICL-220 Soup Warmer

The Soup Warmer by Nemco: With an adjustable heavy duty thermostat and entirely made from stainless steel, the Nemco countertop round cooker/warmer is the perfect addition to any restaurant! This 11 qt. cooker/warmer comes with an inset, cover and ladle as well and also features a new no-drip rim to avoid unsightly messes! This little powerhouse runs on 1250 watts and features the ability to hold a wide variety of soups, sauces and dips.Standard Features: Countertop Round Cooker/Warmer (export). 11 qt. With inset. Cover and ladle. Heavy duty stainless steel construction. Adjustable heavy duty thermostat. 220 volt. 1250 watts. 5.7 amps. 3.5 cord. NEMA 6-15P.

more >>
KaTom Restaurant Supply
$292.60 See It
XL-GG Excel Dryer XLERATOR Hand Dryer, Exclusive ProDryers Go Green Design, 110-120 Volt, LEED Credits, GreenSpec Listed, Warm Air, Fast 10 Second Dry

Excel Dryer XL-GG XLERATOR Hand DryerThis ProDryers exclusive "Go Green" designed Xlerator is perfect for businesses that want a hand dryer that promotes a visible go green environment and naturally draws more use towards the hand dryer and away from paper towels. 110-120 volt units are normally in stock for the ProDryers Exclusive Go Green design Xlerator. While in stock, they will normally ship same day. All other voltages for the Go Green cover such as 208, 220-240, or 277 volt, call us at 888-503-7937. All voltages of all Xlerator hand dryer standard colors (white, black, graphite, chrome, stainless steel) are normally in stock and will ship same day. Most Excel Dryer XL-GG (ProDryers Go Green Design) Xlerator orders will be Lightning Fast Same Day Shipping. Shipping is FREE of charge on all Xlerators to anywhere in the continental US! Guaranteed lowest XLERATOR pricing, anywhere! We are a trusted, Master Distributor for Excel Dryer. We will match or beat any online advertised price. Call 888-50-DRYER to talk with a sales rep right now! Xlerator Hand Dryer Features Dries Hands Completely in 10 to 15 Seconds Uses 80% Less Energy 95% Cost Savings vs. Paper Towels GREENSPEC Approved and Helps Qualify for LEED credits. Source Reduction Alternative Promotes Hygiene Specifications Dimensions 11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP (298 MM LG. X 322 MM HIGH X 170 MM DEEP) Weight:16 LBS. (7.3 KGS.) Construction Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts. Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Mechanism Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet). Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet). Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if ha

more >>
ProDryers.com
$510.00 See It
XL-BF XLERATOR Hand Dryer, Exclusive ProDryers Blue Fusion Design, 110-120 Volt, LEED Credits, GreenSpec Listed, Warm Air, Fast 10 Second Dry

Excel Dryer XL-BF Blue Fusion XLERATOR Hand Dryer designed by ProDryersThis ProDryers exclusive "Blue Fusion" designed Xlerator is perfect for businesses that want a hand dryer that naturally draws more use towards the hand dryer and away from paper towels. 110-120 volt units are normally in stock for the ProDryers Exclusive Blue Fusion design Xlerator. While in stock, they will normally ship same day. All other voltages for the Blue Fusion cover such as 208, 220-240, or 277 volt, call us at 888-503-7937. All voltages of all Xlerator hand dryer standard colors (white, black, graphite, chrome, stainless steel) are normally in stock and will ship same day. Most Excel Dryer XL-BF (ProDryers Blue Fusion Design) Xlerator orders will be Lightning Fast Same Day Shipping. Shipping is FREE of charge on all Xlerators to anywhere in the continental US! Guaranteed lowest XLERATOR pricing, anywhere! We are a trusted, Master Distributor for Excel Dryer. We will match or beat any online advertised price. Call 888-50-DRYER to talk with a sales rep right now! Xlerator Hand Dryer Features Dries Hands Completely in 10 to 15 Seconds Uses 80% Less Energy 95% Cost Savings vs. Paper Towels GREENSPEC Approved and Helps Qualify for LEED credits. Source Reduction Alternative Promotes Hygiene Specifications Dimensions 11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP (298 MM LG. X 322 MM HIGH X 170 MM DEEP) Weight:16 LBS. (7.3 KGS.) Construction Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts. Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Mechanism Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet). Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet). Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if

more >>
ProDryers.com
$510.00 See It
220 Volts (International Use Only) APW CDO-18 Electric Two Deck Countertop Pizza / Deck Oven

The APW Wyott CDO-18 countertop pizza / deck oven comes with two removable ceramic phosphate baking decks, ideal for baking pizza and pretzels, or for finishing sandwiches, flat breads, and bakery products. For maximum heat retention, each countertop oven is insulated on all sides. Three heating elements, one under each deck and one at the top, enable even heating. The APW CDO-18 electric countertop pizza / deck oven comes complete with a 15 minute timer, and a thermostat that adjusts from 300 to 550 degrees Fahrenheit. UL and UL Sanitation listed. Please consult the Specification Sheet for additional measurements, details, and installation information. Choose voltage. Overall Dimensions: Left to Right: 23" Front to Back: 25" Height: 17" CDO-18 From APW Wyott

more >>
The WEBstaurant Store
$1,489.00 See It
Red XLERATOR Hand Dryer XL-R, Zinc Die-Cast Cover - Red Cover, Automatic Sensor, Surface Mounted, LEED Credits, GreenSpec Listed, Commercial Hand Dryer, XL-SP Red

Excel Dryer XL-SP Red XLERATOR Hand Dryer110-120 volt units are normally in stock for the red Xlerator. While in stock, they will normally ship same day. All other voltages for the red cover such as 208, 220-240, or 277 volt, call us at 888-503-7937. All voltages of all Xlerator hand dryer standard colors (white, black, graphite, chrome, stainless steel) are normally in stock and will ship same day. Most Excel Dryer XL-R (XL-SP Red) Xlerator orders will be Lightning Fast Same Day Shipping. Shipping is FREE of charge on all Xlerators to anywhere in the continental US! Guaranteed lowest Excel Dryer XL-R (XL-SP Red) XLERATOR pricing, anywhere! We are a trusted, Master Distributor for Excel Dryer. We will match or beat any online advertised price. Call 888-50-DRYER to talk with a sales rep right now! Xlerator Hand Dryer Features Dries Hands Completely in 10 to 15 Seconds Uses 80% Less Energy 95% Cost Savings vs. Paper Towels GREENSPEC Approved and Helps Qualify for LEED credits. Source Reduction Alternative Promotes Hygiene Specifications Dimensions 11 3/4" LG. X 12 11/16" HIGH X 6 11/16" DEEP (298 MM LG. X 322 MM HIGH X 170 MM DEEP) Weight:16 LBS. (7.3 KGS.) Construction Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts. Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring. All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Mechanism Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet). Hand dryer heating element (900 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet). Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed. Limited Warranty The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's o

more >>
ProDryers.com
$480.00 See It
SunTouch TapeMat kit 220 Sq Ft 24011024-kit-MA

SunTouch TapeMat Kit contains a single mat and a Programmable & GFCI Protected electronic thermostat with built-in timer packaged at the SunTouch Factory in the USA. SunTouch Mat Kit Included are the following items: SunTouch Floor Heating Mat with 10 Ft Armored power lead. SunStat PRO II Thermostat Model 500775 with dual Voltage, Built-in GFCI protection, and Preset or Custom programming. LCD Backlit display and 15 Ft floor sensor wire included. LoudMouth installation monitor for an audible warning if continuity is broken during installation simply connect the included 9-volt battery. Designed & patented by SunTouch contractors call this handy tool peace of mind. Double sided super-sticky tape wide 3/4 in x 108 feet long very thin and low profile to adhere your mat to the floor it works on concrete, plywood or concrete board to hold the mat in place while you trowel over it. Installation Manual with all instructions, suggestions and examples of floor heating layouts. And, Only from Warm Your Floor, we include: Digital Ohm Meter for testing of your mats before, during and after installation complete with 9 volt battery. Suntouch Tips & tricks secrets from experienced installers gathered over many years. Buy With Confidence from Warm Your Floor! Read client testimonials here.

more >>
Sun-Touch
$2,611.00 See It
Search within results