Leviton's Ever-Green pre-wire system enables you to easily install your plug-in charging station using a dedicated 240-Volt outlet. The unique pre-wire system allows you the option to change the location of your charging station in the case you decide to move or if you simply want to reposition the location in your garage. Once the pre-wire system is installed, all you will need to do to begin charging is hang your charging station on the installed mounting bracket, plug your charger in and you're ready to go.
Power your Canon, Contax, and Pentax digital camera devices with Lenmar's Lithium Ion digital camera replacement battery. The 6-Volt/600mAh battery will provide reliable, long-lasting power. It will work with your Canon EOS 1V, Contax 645, Pentax AFL-240, and AFL-240R digital camera device and comes with a charger for your DL2CR5 replacement battery.
The GE Watt-Station Wall Mount EV charger is suitable for residential indoor locations. The GE Watt-Station Wall Mount offers Level II charging, which is capable of reducing charge time from 12-18 hours to 4-8 hours, with service needs of 208-240-Volt AC at 30 Amp assuming a 24 kWh battery and a full-cycle charge. GE Watt Station has a wide variety of features that make it reliable and beneficial to users in many different contexts.
The Siemens 30-Amp Level 2 VersiCharge (VC30GRYU) electric vehicle charger arrives ready to plug in for use into a 240-Volt receptacle and is easily attachable to most surfaces with the provided mounting bracket. Most Electric Vehicle batteries will be charged from zero to full in less than 3.5 hours, leaving plenty of time to delay your charge by 2-8 hours with the easy to use time of charge delay feature on the unit. Additional features like the status indicating LED Halo visible from a distance and a clean cord management solution will leave you even more satisfied when you get into youâ re fully charged EV every day.
Charger with 20-ft. cable plugs into vehicle's 12V power port to charge the StairKing's battery while driving from one jobsite to another. U.S.A. Product Type Accessory, Height in. 240, Handle Type Battery clips. Model Number: 230060. Size: 12. Color:...
The Makita 18-Volt LXT Lithium-Ion battery reaches, so it spends more time working and less time on the charger. Makitaâ s expanding 18-Volt cordless line-up features 80+ tools powered by one 18-Volt Lithium-Ion batteries a full charge in only 30 minutes. The 18-Volt LXT Lithium-Ion Cordless 12 LED Flashlight (model DML801) provides ultra-bright illumination, versatility and convenience. At full brightness (12 LED), it provides 240 Lumens of light. The 2-mode switch also provides a â half-brightnessâ setting with 6 LED (120 Lumens).
FEATURES: Great for traveling abroad with tools, ensuring the ability to charge most anywhere Charges 18-Volt Milwaukee Lithium-Ion Batteries Only Slim profile conserves bench top space The Milwaukee C18C M18 18-Volt Cordless 220-240v Battery Charger uses temperature protection electronics to optimize the charge rate in extreme temperatures to extend battery life. The encapsulated circuit board of the Milwaukee C18C protects the electronics from dust, moisture and impact. The Milwaukee C18C uses LED's to give feedback on current charge level of battery pack. The Milwaukee C18C 220-240-Volt charger will NOT work in North America
FEATURES: Great for traveling abroad with tools, ensuring the ability to charge most anywhere Charges 12-Volt Milwaukee Lithium-Ion Batteries Only Slim profile conserves bench top space The Milwaukee C12C M12 12-Volt Cordless 220-240v Battery Charger uses temperature protection electronics to optimize the charge rate in extreme temperatures to extend battery life. The encapsulated circuit board of the Milwaukee C12C protects the electronics from dust, moisture and impact. The Milwaukee C12C uses LED's to give feedback on current charge level of battery pack. The Milwaukee C12C 220-240-Volt charger will NOT work in North America
SKYRC iMAX B6AC V2 Professional Balance Charger/Discharger SK-100090 Description: Brand: SKYRC Item No: SK-100090 Item name: B6AC V2 Charger AC input: 100-240Volt DC input: 11-18Volt Circuit power: Max.charger power 50W Max.discharge power: 5W Charge current range: 0.1-6.0A Discharge current range: 0.1-2.0A Current drain for balancing: 200mA/cell NiCd/NiMH battery cell count: 1-15 cells LiPo/LiFe/Lilon cell count: 1-6 cells Pb battery voltage: 2-20V Net weight: 575g Dimension: 135x144x36mm Features: Lithium Battery Meter Battery Internal Resistance Meter Re-Peak Mode for NiNH/NiCd Battery Terminal Voltage Control Maximum Safety Protection PC Communications: USB Port for PC Control & Firmware Upgradable Package included: 1 x B6AC V2 Charger 1 x T plug with banana connector charging cable 1 x DC cable with Alligator Clip charging connector 1 x T plug with Alligator Clip connector charging cable 1 x T plug with Futaba connector charging cable 1 x T plug with JST connector charging cable 1 x T plug with XT60 connector charging cable 1 x English manual
The Forney 319 MIG Welder, 230-Volt, CV/DC, 1-phase with 270-amp maximum output is a versatile machine for light industrial, repair shops, farms, automotive and general fabrication. This machine is MIG ready with regulator and gas hose. This machine is a multi-step transformer based type welder with 10 taps. Welding processes are MIG (GMAW) and Flux Cored (FCAW). The Forney 270 MIG is a new machine for Forney and offers quality features like spool gun capability, quick euro disconnect torch, longer gun/torch with common consumables, extra-long power cord, HD cast aluminum feed/drive system with geared idler and drive rolls, multiple trigger modes and high output and duty cycle with a full size cabinet. This machine has a digital readout and multiple trigger modes for spot welding. 2T for normal trigger pull on/off and 4T for sustained long welds. 10 ft. (3.04 m) MIG gun/torch. 15 ft. (4.5 m) power cord. Input power is 230-Volt, CV/DC, 1-Phase. Maximum amp output is 270-Amp. Acceptable spool sizes are 4 in., 8 in. and 12 in. Acceptable wire diameters are up to 0.045 in. The weight is 240 lbs. Standard U.S. gas hose set up. The 5/3/1 or Advanced Replacement warranty is as follows with 5 years parts and labor or full replacement of transformer. 3 years parts and labor or full replacement of all components and parts inside the battery charger or welder that cover within the exception of the transformer, 1 year parts.
This digital mini-microscope features a 7x to 27 x optical magnifications complemented by 4x digital zoom for a total 7x to 108 x magnification ranges. It offers image capture and real time viewing mode on a USB-connected PC and the included software is ideal for quality control, engineering and hobbyist applications. Comes with microscope stand, three AAA Ni-MH rechargeable batteries, 100 to 240 VAC (50/60 Hz) adaptor/charger with 110-Volt US plug, and Windows-compatible PC software with mini USB cable, cleaning cloth, wrist strap, and user manual.
DEK commercial grade portable generator with 3-year limited warranty is the recommended generator for construction sites or emergency power. Capable of running for 24 hours at half load with its 12.6 gal. Tank of gasoline. It comes equipped with one 240-Volt twist lock receptacle, four 120-Volt duplex outlets, one 12-Volt DC auto/marine battery charger, one 12-Volt cellphone charger adapter and one 12-Volt jumper cable plug and cables. No additional accessories are needed; it includes retractable handle-bars and never-go-flat wheels for easy transportation.