1 to 20 of  100 products for 306 building the custom mauser rifle custom mauser rifle

No exact matches found for 306 building the custom mauser rifle custom mauser rifle

100 similar items found

Bolt Action Rifle Bedding Studs - Rem 700/Wby Bedding Studs

Easy-to-use system aligns the action with the bottom metal for a professional bedding job without damaging the original screws. Polymer bushings, two on each stud, seal the threaded action screw holes and bottom metal inlets to keep out epoxy overflow and help prevent parts from getting permanently bonded in the stock. Kits available for Remington 700/Weatherby, Winchester Model 70, and Mauser 98. Mfg: Power Custom SPECS: Studs - Steel, natural finish. Bushings - Polymer. Washer/Nuts - Stainless Steel. 27/8" (7.3cm) long. Win M70 kit contains (3) studs, (3) washers and (6) hex nuts. Other kits contain (2) studs, (2) washers and (4) hex nuts.

more >>
Brownells
$27.99 See It
Pete Grisel-Designed 510 Custom Floorplate - Model 510 Custom Floorplate -22%

Machined steel, one-piece, Oberndorf-type triggerguard assemblies designed for the Custom Gun Builder by Pete Grisel. Straight sided, integral magazines (on Model 70 and Mauser 98 units) and a 5° draft, or taper, on the floorplate edges greatly cuts inletting time, gives tightest fit. Fully engravable, polished to a 220 grit finish and can be inletted into the original stock. A beautiful addition to any fine, custom-built rifle. Mfg: Sunny Hill SPECS: Remington 700: #510 for blued, Long Action.

more >>
Brownells
$389.99 $304.99 See It
Mauser 98 Overmolded Rifle Stocks - Pillar Style, Fits Mauser 98 Sporter

Classic-style, straight line stock with rubber skin overmolded on fiberglass shell, is warm to the touch and won't become slippery when wet. Non-slip rubber surface provides an enhanced grip, plus it is extremely quiet. Pebble finish, textured panels along the wrist and forend provide additional grasping surface. Fully inletted for a drop-in fit. Pillar model features molded in, aluminum bedding posts at front and rear action mounting points. Full Block model has an accuracy improving, CNC machined, full-length aluminum bedding block that extends from the action to the forend. All models feature rubber recoil pads. Mfg: Hogue SPECS: Fiberglass with rubber covering, black. 7075 aluminum bedding block. 31.5" (80cm) long. 14" (35.5cm) l.o.p. 1.9 lb. (862 g) wt. Mauser fits 98 Sporter and military actions.

more >>
Brownells
$99.99 See It
Mauser Bolt Rifles -69%

MAUSER BOLT RIFLES is the most complete, precise, authoritative and comprehensive work ever done on Mauser bolt rifles . . . so inclusive that a thorough knowledge of it will make you a Mauser expert in your own right! Within its covers are: Exhaustive data on each development, all specific characteristics, variations, models, innovations, modifications. Countries who made or bought Mausers and their changes and markings. Complete ammo data, ballistics, effectiveness and uses. How to identify details. ''''How-it-works'''' drawings/pictures with step-by-step instructions. Foreign and contract rifles. Sporters including Oberndorf and foreign models. Experimental rifles. And, pi Mfg: Brownells

more >>
Brownells
$64.94 $19.99 See It
Sportsman Trigger - M98-K-Sp Trigger Fits Mauser 98k Gew Military

CNC machining and advanced metallurgy provide a durable, reliable replacement trigger for stock military and sporterized Mauser, Springfield and Enfield rifles. Adjusts for pull weight, (2-4 lb.), creep and overtravel. Lock nuts hold settings. Excellent replacement for that heavy military trigger. No safety. Mfg: Timney SPECS: 6061 T6 aluminum housing. Heat-treated steel internals. Polished sear/trigger surfaces. Serrated .250'''' (6.3mm) wide shoe. M91-4 has longer trigger shoe to fit un-modified military rifles. M98-K and M91-4K sets ¼'''' forward to fit short, 1.75'''', triggerguards. Fits stock, military rifle

more >>
Brownells
$58.99 See It
Mauser Front Sight Blank - Front Sight Blank

.375'''' high blade lets you zero the Model 96 Swede and others to point of aim. Square post blade gives an easy-to-see, well defined sight picture with issue rear sights. Plenty of extra material so you can file and shape the blade to original contour or a custom shape. 5.26mm dovetail fits the Mauser front sight base. Fits most Mauser 91 through 98 rifles with military sight base. Mfg: Brownells SPECS: Steel, blued, matte finish. .077'''' (1.9mm) wide, .375'''' (9.5mm) high above 81° x .207'''' x .081'''' dovetail. May require minor fitting.

more >>
Brownells
$14.99 See It
Carbine Buffer - Rifle Buffer

Genuine DPMS factory parts will help you repair an existing rifle or correctly install a stock to a custom build. Buffers and springs are weighted to function properly in DPMS LR-308 and Remington R-25 rifles. Rifle Buffer fits buffer tube for fixed, A2-type rifle stock; will not work in carbine tube. Mfg: Dpms SPECS: Carbine Buffer Steel body. 2½" long, 3.7oz. wt. Rifle buffer Aluminum body. 4-7/8" long.

more >>
Brownells
$20.99 See It
Rifle Fire Sights - Red Fire Sight Fits 290n

Easy-to-install front sights for popular centerfire and muzzleloading rifles gather ambient light for superb visibility. The more light, the brighter the round, red beads glow; won't "wash out" even in the strongest sunlight. Narrow sights fit Williams Streamlined and Shorty Ramps. Medium sights fit most factory ramps including Marlin and Remington. Wide sights are for .22 rimfire rifles and muzzleloaders. Mauser 98 model for .200 dovetail. Mfg: Williams Gun Sight SPECS: Blued steel. Fiber optic insert. Beads: 1/16" (1.6mm) dia. Fit nominal 3/8" dovetail. Number indicates height - Height measured from bottom of dovetail to top of sight; letter (N, M or W) indicates base width: N Series -.250" (6.3mm) wide base. M Series - .340&qu

more >>
Brownells
$15.99 See It
Leupold Vx-6 3-18x50mm Custom Dial System Rifle Scope

FREE SHIPPING Orders $50+

The Leupold VX-6 3-18x50mm Rifle Scope has lead-free lenses and scratch resistant DiamondCoat 2 coatings. The scope features Leupolds Custom Dial System, allowing users to tailor their scope settings to their specific ballistics and sight in conditions.

more >>
Overstock Main
$1,299.99 See It
Remington 700 Rifle Action Wrench & Head - Complete Remington 700 Wrench

The only commercially available action wrench system that surrounds and supports the receiver ring and recoil lug to distribute potentially damaging torque forces equally. The solid steel base has a unique, machined ­relief to clear the recoil lug on most Mauser-type bolt action rifles and, the individual, bolt-on Heads are machined to provide an exact fit around and against the receiver ring or barrel nut for each of the firearm models listed. Together, they support the receiver in a ring of steel and greatly increase the amount of surface gripping area to totally eliminate twisted bolt ways or damaged, ruined receivers. This is the most advanced, complete, professional-quality, Action Wr Mfg: Brownells

more >>
Brownells
$139.99 See It
Mauser 98 Synthetic Rifle Stock - Mauser M-98

Lightweight, stable stocks, made in the classic style, ready to bed and finish. Structural, injection-molded, urethane foam covered with up to 7 layers of fiberglass and epoxy composite, makes these stocks unbelievably strong without excessive weight. Fully inletted, (glass bedding recommended) with a smooth, gray finish; ready to lightly sand and paint. Forearm will accept up to a #4 barrel contour. Mfg: High Tech Specialties SPECS: Fiberglass-covered foam, gray. 30¼" (76cm) long, 13-7/8" (35cm) l.o.p. without pad, 1" (2.5cm) drop at comb, 20.3 oz. (556 g) wt. Includes sling swivel studs.

more >>
Brownells
$269.99 See It
Remington 700 Custom Trigger - L-1k Custom Trigger Fits 2006 & Later

Adjustable trigger kit lets you select the weight of pull, let-off, and overtravel that best suit your style of shooting. Comfortable, .330" factory width, trigger shoe delivers excellent feel, vertical grooves give positive purchase. Housing is CNC machined from aluminum billet; provides greater internal clearance to reduce drag and produce a smooth felt pull. Available in four weight-of-pull ranges. Models for pre-2006 manufactured rifles retain the factory safety lever and bolt release. K models are required for rifles manufactured in 2006 and later, and include safety and bolt release. Fits Remington 700, 40X, and pre-2006 Model Seven rifles. Mfg: Rifle Basix SPECS: Housing - T6-6061 aluminum, hardened. Machined and hardened steel levers and pins. Pre-2006 triggers fit Rem 700, 40X, and Model Seven rifles without X-Mark Pro triggers and manufactured prior to 2006. 2006 & Later triggers fit Remington 700 and 40X models only manufactured in 2006 and

more >>
Brownells
$149.99 See It
Standard Line Bronze Bore Brushes - 1 Dozen .30 Rifle

Since darn near as many bore brushes get used in the shop as get sold, weve packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Bronze Bore Brushes - Best phosphor bronze scrubbing wire, for long life, thorough cleaning. Mfg: Brownells SPECS: Bristles: Available in bronze. Shank: Steel, looped and wound. Rifle: 3¼ (8.3cm) OAL, .17 and.20 cal. 5-40 threads, all others 8-32 thread. Pistol/Revolver: 2-1/8 (5.4cm) OAL, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8 (7.3cm) OAL, 5/16''''-27 thread.

more >>
Brownells
$15.99 See It
Standard Line Bronze Bore Brushes - 1 Dozen .22 Centerfire Rifle

Since darn near as many bore brushes get used in the shop as get sold, weve packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Bronze Bore Brushes - Best phosphor bronze scrubbing wire, for long life, thorough cleaning. Mfg: Brownells SPECS: Bristles: Available in bronze. Shank: Steel, looped and wound. Rifle: 3¼ (8.3cm) OAL, .17 and.20 cal. 5-40 threads, all others 8-32 thread. Pistol/Revolver: 2-1/8 (5.4cm) OAL, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8 (7.3cm) OAL, 5/16''''-27 thread.

more >>
Brownells
$15.99 See It
Standard Line Bronze Bore Brushes - 1 Dozen .22 Rifle

Since darn near as many bore brushes get used in the shop as get sold, weve packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Bronze Bore Brushes - Best phosphor bronze scrubbing wire, for long life, thorough cleaning. Mfg: Brownells SPECS: Bristles: Available in bronze. Shank: Steel, looped and wound. Rifle: 3¼ (8.3cm) OAL, .17 and.20 cal. 5-40 threads, all others 8-32 thread. Pistol/Revolver: 2-1/8 (5.4cm) OAL, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8 (7.3cm) OAL, 5/16''''-27 thread.

more >>
Brownells
$15.99 See It
Standard Line Bronze Bore Brushes - 3, .22 Rifle

Since darn near as many bore brushes get used in the shop as get sold, weve packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Bronze Bore Brushes - Best phosphor bronze scrubbing wire, for long life, thorough cleaning. Mfg: Brownells SPECS: Bristles: Available in bronze. Shank: Steel, looped and wound. Rifle: 3¼ (8.3cm) OAL, .17 and.20 cal. 5-40 threads, all others 8-32 thread. Pistol/Revolver: 2-1/8 (5.4cm) OAL, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8 (7.3cm) OAL, 5/16''''-27 thread.

more >>
Brownells
$4.98 See It
Standard Line Nylon Bore Brushes - 3, .22 Rifle

Since darn near as many bore brushes get used in the shop as get sold, weve packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Nylon Bore Brush - New generation bore cleaners attack copper and bronze-based bullet jacket fouling aggressively and are just as hard on bronze cleaning brushes. Our nylon brushes stand up to these super cleaners and wont cause accuracy-ruining scratches. One-piece, looped and wound steel shanks (except Black Powder (BP) series, .17 cal., and .20 cal., which have brass shanks). Mfg: Brownells SPECS: Bristles: Available in nylon. Shank: Steel, looped and wound. Rifle: 3¼ (8.3cm) OAL, .17 and.20 cal. 5-40 threads, all others 8-32 thread. Pistol/Revolver: 2-1/8 (5.4cm) OAL, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8 (7.3cm) OAL, 5/16''''-27 thread.

more >>
Brownells
$5.99 See It
Standard Line Nylon Bore Brushes - 3, .30 Rifle

Since darn near as many bore brushes get used in the shop as get sold, weve packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Nylon Bore Brush - New generation bore cleaners attack copper and bronze-based bullet jacket fouling aggressively and are just as hard on bronze cleaning brushes. Our nylon brushes stand up to these super cleaners and wont cause accuracy-ruining scratches. One-piece, looped and wound steel shanks (except Black Powder (BP) series, .17 cal., and .20 cal., which have brass shanks). Mfg: Brownells SPECS: Bristles: Available in nylon. Shank: Steel, looped and wound. Rifle: 3¼ (8.3cm) OAL, .17 and.20 cal. 5-40 threads, all others 8-32 thread. Pistol/Revolver: 2-1/8 (5.4cm) OAL, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8 (7.3cm) OAL, 5/16''''-27 thread.

more >>
Brownells
$5.99 See It
Assault Systems Rifle Case 33" Black -26%

On sale: 26% off

The original Assault Systems(TM) rifle cases are made in the USA, and build to last a lifetime. They are constructed of 1000 denier nylon with thick foam padding, full-length zippers, and heavy-duty hardware. The ARC's have welded steel D rings and

more >>
Sears
$99.95 $73.96 See It
Standard Line Bronze Bore Brushes - 3, .22 Centerfire Rifle

Since darn near as many bore brushes get used in the shop as get sold, weve packed these custom-made, top quality brushes in bulk paks to make them more convenient and less expensive. The shank is one-piece, looped and wound (not two, twisted together and chopped off). Bronze Bore Brushes - Best phosphor bronze scrubbing wire, for long life, thorough cleaning. Mfg: Brownells SPECS: Bristles: Available in bronze. Shank: Steel, looped and wound. Rifle: 3¼ (8.3cm) OAL, .17 and.20 cal. 5-40 threads, all others 8-32 thread. Pistol/Revolver: 2-1/8 (5.4cm) OAL, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8 (7.3cm) OAL, 5/16''''-27 thread.

more >>
Brownells
$4.98 See It
Search within results
  • Find by Price
    • $ to $