1 to 14 of  14 products for 312 ton garage hydraulic floor lift jack arcan

No exact matches found for 312 ton garage hydraulic floor lift jack arcan

14 similar items found

Power Team 100 Ton SPX Hydraulic Puller PTPH-100T

Power Team Adjustable jaws mean they always pull on a flat surface. Retaining chain holds jaw in place during positioning. Grip-O-Matic feature means jaws grip progressively tighter as more pulling force is applied. Single-acting, spring return type with maximum working pressure of 10,000 psi. Lifting bracket allows puller to be lifted if the workpiece center is more than 36" off the floor. Adjusting screw allows operator to move vertical position of the puller. Spring loaded feature means Enforcer 100 will align itself on uneven pulls. Hydraulic pump is a 2-stage, high pressure unit controlled by remote hand switch with 25 foot cord.

more >>
Ohio Power Tool
$27,795.20 See It
Baileigh 44 Ton Ironworker SW-441

When a small fabricating shop is looking for new ironworker, two needs come to the front; floor space and cost.  The SW-44 takes care of both problems.  The small foot print allows it to fit just about anywhere and the cost makes it very attractive.  Available in two electrical configurations, 220 volt single and three phase, assuring the SW-44 ironworker will work in any shop.The SW-44 hydraulic Ironworker from Baileigh industrial is a 4 station machine with 44 tons of punching and shearing force.  The four main functions of the SW-44 are punching; flat bar shearing, angle cutting, and section cutting for profiles.  This pivot style ironworker is perfect for the shop on a budget, but this does not mean that it is short on features.  The SW-44 is available in both single and three phase versions and are both CSA and CE certified.  A foot pedal control is also standard, as well as oversized tables for the punching and shearing sections.Capable of running at 23 cycles per minute, the SW-44 will make quick work of anything that you throw at it. And to add to the value the SW-44 includes a 3/4" punch and die set!FEATURES:-44 Ton-Oversize tables with adjustable material stops-Foot pedal controlled-CE and CSA certified-Material hold downs-Many optional accessories available-Safety interlock switchesSPECIFICATIONS:PUNCHING:-Punching Pressure:  44 tons-Punch Capacity:  .75" x .625"(Diameter x Thickness) 1.5" x .375"-Throat Depth:  6.88"-Max. Stroke Length:  1.125"-Cycles/Min.  23-Working Height Up to Die:  42.32"FLAT SHEARING:-Flat Bar Shearing:  7.87" x .5"-Blade Length:  13.87"-Angle Flange Trim:  3.14" x .393"-Working Height:  42.32"ANGLE SHEARING:-At 90-degrees Shearing:  3" x 3" x .25"-Working Height:  40"BAR SHEARING:-Round Bar Shear:  1.125"-Square Bar Shear:  1" x 1"OTHER:-Electrical Requirements: 220V Single Phase -Net Weight (Apr.):  1,320lb-Dimensions (LxWxH):  45" x 30" x 68"

more >>
Elite Metal Tools
$7,246.25 See It
Shop Press 20-Ton PR104

This professional hydraulic shop press can be floor mounted and has the following features: 20-Ton Hand Pump Heavy-Duty Ram, Easy to read pressure gauge, press plates, 69-inch Height, 7.5-Inch Stroke, 19.5-inch inside frame. Weighs 220 lbs.

more >>
Eastwood.com
$399.99 See It
Shop Press 12-Ton PR103

This professional hydraulic shop press can be floor mounted and has the following features: 12-Ton Hand Pump Heavy-Duty Ram, Easy to read pressure gauge, press plates, 61-inch Height, 7-Inch Stroke, 18.5-inch inside frame. Weighs 165 lbs.

more >>
Eastwood.com
$295.99 See It
Baileigh 44 Ton Ironworker SW-443

When a small fabricating shop is looking for new ironworker, two needs come to the front; floor space and cost.  The SW-44 takes care of both problems.  The small foot print allows it to fit just about anywhere and the cost makes it very attractive.  Available in two electrical configurations, 220 volt single and three phase, assuring the SW-44 ironworker will work in any shop.The SW-44 hydraulic Ironworker from Baileigh industrial is a 4 station machine with 44 tons of punching and shearing force.  The four main functions of the SW-44 are punching; flat bar shearing, angle cutting, and section cutting for profiles.  This pivot style ironworker is perfect for the shop on a budget, but this does not mean that is short on features.  The SW-44 is available in both single and three phase versions and are both CSA and CE certified.  A foot pedal control is also standard, as well as oversized tables for the punching and shearing sections.Like all Baileigh Industrial ironworkers, the SW-44 has many options available including pipe notching, and press brake attachments.  Capable of running at 23 cycles per minute, the SW-44 will make quick work of anything that you throw at it.FEATURES:-44 Ton-Oversize tables with adjustable material stops-Foot pedal controlled-CE and CSA certified-Material hold downs-Many optional accessories available -Safety interlock switchesSPECIFICATIONS:PUNCHING:-Punching Pressure:  44 tons-Punch Capacity:  .75" x .625"(Diameter x Thickness) 1.5" x .375"-Throat Depth:  6.88"-Max. Stroke Length:  1.125"-Cycles/Min.  23-Working Height Up to Die:  42.32"FLAT SHEARING:-Flat Bar Shearing:  7.87" x .5"-Blade Length:  13.87"-Angle Flange Trim:  3.14" x .393"-Working Height:  42.32"ANGLE SHEARING:-At 90-degrees Shearing:  3" x 3" x .25"-Working Height:  40"BAR SHEARING:-Round Bar Shear:  1.125"-Square Bar Shear:  1" x 1"OTHER:-Electrical Requirements:  15 Hp-220V 3-phase-Net Weight (Apr.):  2,310 lbs.-Dimensions (LxWxH):  45" x 30" x 68"

more >>
Elite Metal Tools
$6,446.25 See It
Hein-Werner 4 Ton Hydraulic Service Jack HW93657

Hein-Werner MADE IN USA Dual pump action provides speed to contact and power to lift. Handle adjusts to three pumping positions. Extra long chassis for low overhangs. "T" handle with release knob for ease of positioning and load control. Low height 5-1/2" 26" maximum height.

more >>
Ohio Power Tool
$1,357.20 See It
170 Ton HMI C-Frame Press PJP 17014

The line of Betenbender PJP C-Frame Pess offers the best value in any line of C-Frame pressing equipment today! With a the wide range of tonnages, throat heights, throat depths and stroke length. There is a machine to fit your needs!Features:Large heavy duty design of the press frame to limit the deflectionPress bed bolted on, not welded, to prevent distortion. Can be easily removed for regrinding or adding more tapped holesLarge rectangular tubes used at base of machine to give safe, instant portability.Oil reservoir is located vertically between the side plates to keep the machines foot print as small as possible.Hydraulic system is equipped with a wire mesh strainer on the suction side and a 10 micron filter on the return side to keep the system clean.Pump, motor, valve and reservoir are all easily accessible for maintenance.Large press bed to accommodate a variety of tooling other than just punching.Punch package comes standard with unit.Reservoir filled with oil.Remote foot control, cycle can be stopped and reversed at any point.Lock out - tag out accommodations.Operators manual.12 month manufactures warranty Built in the USA!SpecificationsModelPJP 17014Tonnage Capacity170 TonsLength of Stroke11"Throat Depth14"Throat Height18"Press Platen L-R, F-B44"x17"Floor to Press Platen36"Distance between Housing22.5"Open Height18"Shut Height7"Rod Diameter4"Cylinder Bore Diameter11"1" Cycles per Minute 25Pump Capacity G.P.M19.5 GPMOperating Pressure PSI3000 PSIMotor20 H.P. 220V, 3PHResevoir Capacity55 Gallons, Oil furnisedPress Dimensions63.7"x44"x82.5"Weight15,831Ibs 

more >>
Elite Metal Tools
$49,995.00 See It
Two-Stage Floor Service Jack - 50-Ton Lift Capacity, Model 10770

Quickly lift a heavy-duty vehicle under 50 Tons with this two-stage hydraulic jack. Easy-to-use with casters and fingertip control. Designed for maximum stability. Lifts up to 50 tons from 8 1/3in.H to 15 5/8in.H. Min. Lift Height in. 8 1/3, Max.

more >>
Northern Tool
$2,199.99 See It
Gray 10 Ton Floor Service Jack FSJ-200

Maximum capacity: 20,000 lb Minimum start height: 7" Maximum lift height: 27" Power: air/hydraulic or manual Air Pressure Required: 90 - 175 psi Saddle Diameter: 8" Chassis height: 10" Handle length: 47" Overall length: 101-3/4" Overall width: 21-7/8" Overall reach: 93" Shipping weight: 410 lb

more >>
Ohio Power Tool
$3,113.00 See It
Gray 25 Ton Floor Service Jack TSL-50

Maximum Capacity: 50,000 lb Starting height: 8" Maximum lift height: 21" Power: air/hydraulic Air pressure required: 90 psi Lift travel: 5 1/8" Overall length: 20" Overall height: 58" Overall width: 12" Shipping weight: 124 lbs

more >>
Ohio Power Tool
$1,225.00 See It
Gray 6 Ton Floor Service Jack FSJ-120 GRAFSJ-120

Maximum capacity: 12,000 lb Minimum start height: 4" Maximum lift height: 23 1/4" Power: air/hydraulic Chassis height: 9 3/4" Chassis length: 48" Handle length: 47 3/4" Overall length: 95 1/4" Shipping weight: 256 lb

more >>
Ohio Power Tool
$2,581.00 See It
Gray 25 Ton Floor Service Jack Short TSL-50S

Maximum Capacity: 50,000 lb Starting height: 8" Maximum lift height: 21" Power: air/hydraulic Air pressure required: 90 psi Lift travel: 5 1/8" Overall length: 20" Overall height: 58" Overall width: 12" Shipping weight: 124 lbs

more >>
Ohio Power Tool
$1,199.00 See It
Gray 35 Ton Floor Service Jack TSL-70

FREE SHIPPING Maximum Capacity: 70,000 lb Starting height: 9-1/4" Maximum lift height: 22" Power: air/hydraulic Air pressure required: 110 psi Lift travel: 5 1/8" Overall height: 58-1/2" Overall width: 14-1/4" Shipping weight: 146 lbs

more >>
Ohio Power Tool
$2,044.00 See It
Hein-Werner (OMEHW93642) 2 Ton Floor Jack

Low 3.75" pick-up height.high height of 20". Removable one-piece handle. U-joint release mechanism for precise load control. In-line pump provides for the most efficient pumping operation. Cast iron lift arm for heavy duty loads. Automatic valve prevents overloading. Sealed hydraulic pump to protect from contamination. Full swivel rear casters for easy positioning. Flanged side plates increase strength. Made in USA, ships truck only.

more >>
Amazon
$340.50 See It
Search within results
  • Find by Price
    • $ to $