1 to 20 of  157 products for ac dc grinders

Result for "ac dc grinders"
Makita 5" Angle Grinder, 9558pb, 7.5 Amp, 10,000 Rpm, 5/8"-11, Paddle Switch, Ac/Dc, Lock-Off/On

Makita 5" Angle Grinder, 9558PB, 7.5 Amp, 10,000 RPM, 5/8"-11, Paddle Switch, AC/DC, Lock-Off/On Large Paddle Switch for Comfortable Operation, Powerful 7.5 AMP motor for high output power in a more compact tool (only 4.6 lbs.). Small diameter barrel grip (only 2-1/2") for added comfort. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. AC/DC switch for use with alternative power source. Protective zig-zig varnish seals the armature from dust and debris for longer tool life. Large paddle switch for comfortable operation. Thicker coil wires are wound more closely to reduce heat and energy loss. All-ball bearing design and metal gear housing for durability. 13.80 L. 5.70 W. 4.70 H.

more >>
Global Industrial
$100.95 See It
Makita 5" Angle Grinder, 9005b, 9 Amp, 10,000 Rpm, Ac/Dc, 5/8"-11

Makita 5" Angle Grinder, 9005B, 9 Amp, 10,000 RPM, AC/DC, 5/8"-11 Jobsite Proven for Over 20 Years, Powerful 9.0 AMP motor. Lightweight (6.6 lbs.) for high production work with less fatigue. Lock-on button for continuous operation. Side handle can be installed on either side of the tool. All-ball bearing construction for longer tool life. Spindle lock for easy wheel changes. AC/DC for use with alternative power source. Standard 5/8" x 11 UNC spindle. Double insulated. 13.80 L. 5.70 W. 4.70 H.

more >>
Global Industrial
$155.95 See It
GA6010ZX2 6-in Angle Grinder w/ AC/DC Switch

Makita 6-inch Cut-Off / Angle Grinder w/ AC / DC Switch and Cutting /Ggrinding Guards and Wheels GA6010ZX2 Powerful 10.5 AMP motor delivers more output for increased performance Refined design at only 5.9 lbs. for reduced operator fatigue Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life Externally accessible brushes for greater serviceability Ergonomic soft grip provides increased comfort on the job Spring loaded metal sealed drive bearing is engineered to prevent dust and debris from penetrating drive bearing Zig-zag varnish protects the armature coil from dust and debris for longer motor life Spiral bevel gears for smoother rotations and a more efficient transfer of energy AC/DC switch for use with alternative power source Includes both the cutting and grinding guards and wheels Makita 6-inch Cut-Off / Angle Grinder w/ AC / DC Switch and Cutting /Ggrinding Guards and Wheels

more >>
Factory Authorized Outlet
$149.99 See It
6-in Angle Grinder w/ AC/DC Switch - GA6010ZX2

Makita 6-inch Cut-Off / Angle Grinder w/ AC / DC Switch and Cutting /Ggrinding Guards and Wheels GA6010ZX2 Powerful 10.5 AMP motor delivers more output for increased performance Refined design at only 5.9 lbs. for reduced operator fatigue Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life Externally accessible brushes for greater serviceability Ergonomic soft grip provides increased comfort on the job Spring loaded metal sealed drive bearing is engineered to prevent dust and debris from penetrating drive bearing Zig-zag varnish protects the armature coil from dust and debris for longer motor life Spiral bevel gears for smoother rotations and a more efficient transfer of energy AC/DC switch for use with alternative power source Includes both the cutting and grinding guards and wheels Makita 6-inch Cut-Off / Angle Grinder w/ AC / DC Switch and Cutting /Ggrinding Guards and Wheels

more >>
Max Tool
$149.99 See It
Bosch® 4-1/2" Grinder Concrete Cutting Kit, 18dc-4k

Bosh 4-1/2" Grinder Concrete Cutting Kit, 18DC-4K Bosh 4-1/2 Grinder, 1800 Features: Lock-on/off switch for extended use applications AC/DC capability Extends the versatility of the tool by working from DC outlets such as welders and generators Vibration Control Handle Reduces vibration up to 60%, providing uncompromising user comfort for extended periods of work Sealed switch Keeps debris out of the switch mechanism and extends switch life ServiceMinder brushes Eliminates guesswork, stops the tool when preventative maintenance is required Epoxy Coated Field Windings Provides ultimate protection against abrasive dust and metal debris 5/8" -11 Spindle wide flexibility for mounting most popular accessories Tool-free adjustable guard Quick guard installation and adjustments Spindle Lock For quick wheel changes Directed Air Flow Unique design diverts dust away from switch and vital components Dust Extraction Guard, 18DC-5E Features: Dust Collection - Reduces clean-up time and provides cleaner, safer air for userLarge, Durable Foot Plate - Greatly increases stability during use for clean and accurate cutsSingle Screw Depth Adjustments - Quickly adjusts and maintains desired depth of cutCompletely tool free - Compatible with all 1800 series 4 " & 5" Small Angle GrindersBosch AIRSWEEP Vacuum Compatible - Plug and play without using adaptors Turbo Rim Diamond Abrasive Wheel, DB4542: Application: Pavers, marble, slate, fire brick. Arbor: 7/8", 20mm, 5/8". Diameter: 4-1/2" Includes: Guard , Vibration Control Auxiliary Handle, Flange Kit (inner & outer wheel flanges), Spanner Wrench, Abrasive Wheel 16.75 L. 11.25 W. 6.75 H.

more >>
Global Industrial
$163.95 See It
GA7001L 15 Amp 7 in. Trigger Switch AC/DC Angle Grinder

15 Amp 7 in. AC/DC Angle Grinder - GA7001L. 7 in. Grinding Wheel - 741413-3. Wheel Guard - 164477-4. Flange - 224111-9. Lock Nut - 224512-1. Side Handle - 273480-5. Lock Nut Wrench - 782412-6. Spindle Washer - 261039-0. Operating Manual. Extra heavy duty (15 Amp) motor for high production and continuous use. 6,000 RPM for optimum material removal. Removable side handle can be mounted on either side. AC/DC switch for use with alternative power source. Rugged housing for durability. Spindle lock for easy wheel changes. Standard 5/8 in. - 11 UNC spindle for various accessories

more >>
Tyler Tool
$269.99 See It
1209 8.4 Amp AC/DC Die Grinder

8.4 Amp AC/DC Die Grinder - 1209. 1/4 in. Collet - 2 608 570 014. 22mm Wrench - 1 607 950 505. 14mm Wrench - 1 607 950 511. 8.4 amp motor produces 16,000 RPM. Metal gear housing - Withstands job-site abuse. AC/DC capability - Extends the versatility of the tool by working from DC outlets such as welders and generators. Trigger bar with lock off switch - More control plus ease of use during demanding jobs. Double insulated, UL listed, complies to OSHA. This item may ship in the original manufacturer's packaging

more >>
Tyler Tool
$389.99 See It
9005B 5 in. Trigger Switch AC/DC Angle Grinder

5 in. AC/DC Angle Grinder - 9005B. Grinding Wheel - 741407-8. Wheel Guard - 164556-8. Side Handle - 273480-5. Inner Flange - 224178-7. Lock Nut - 224509-0. Lock Nut Wrench - 782412-6. Spindle Washer - 261039-0. Operating Manual. Ball bearing construction for long tool life. Removable side handle can be installed on either side of tool for operator comfort. Spindle lock for easy accessory changes. AC/DC for use with alternative power sources. Lock-on button for continuous use operation. Standard 5/8 in. - 11 UNC spindle. Double insulated

more >>
Tyler Tool
$144.99 See It
Dewalt® Dwe402k 4-1/2" (115mm) Small Angle Grinder Kit

4-1/2" (115mm) Small Angle Grinder Kit 10.0 Amp AC/DC 11,000 rpm motor designed for faster material removal and higher overload protectionDust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake ventsLow profile, jam-pot gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spacesOne-piece brush arm prevents brush hang-up due to dust ingestionQuick-Change Wheel Release allows tool free wheel removal without need for a wrenchKeyless adjustable guard provides tool-free guard adjustments, increasing productivityVibration-reducing side handle increases comfort for extended use applicationsAuto-off brushes shut the tool down when the brushes need replacing to avoid tool damageOversized, protected spindle lock button provides easier and quicker wheel changesPaddle switch with safety lock-off prevents accidental start upMatching wheel flanges allow the use of common accessories Manufacturers Warranty 90 Day Money Back Guarantee3 Year Limited Warranty1 Year Free Service Contract 16.00 L. 6.25 W. 8.00 H.

more >>
Global Industrial
$108.95 See It
Dewalt® Dwe4011 4-1/2" Small Angle Grinder W/ One-Touch Guard

DEWALT DWE4011 4-1/2" Small Angle Grinder w/ One-Touch Guard Features: 7.0 Amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protectionOne-Touch Guard eliminates the need for a tool to adjust the guard location - No buttons or levers, just turn the guard to position itHex wrench replaces spanner wrench - hex wrench is found in most tool boxes if lostLow profile, jam-pot gear case increases durability and allows tool to fit into tight spacesQuick-Change Wheel Release allows tool free wheel removal without need for a wrench2-position removable side handle provides increased comfort and controlSlim, ergonomic body design provides increased comfort in extended use applications5/8"-11 spindle thread accepts a wide range of 4-1/2" accessoriesWarranty Information: 3 Year Limited Warranty1 Year Free Service Contract90 Day Money Back GuaranteeIncludes: 4-1/2" Small Angle Grinder2-position side handleDepressed center wheelOne-Touch GuardHex Wrench 15.40 L. 5.60 W. 6.10 H.

more >>
Global Industrial
$73.94 See It
GA9031Y 120 Volt 9" Angle Grinder

Industrial Power Tools Powerful 15.0 AMP motor delivers 6,600 RPM for faster material removal * Rotatable rear handle rotates with just the push of a button, with positive stops every 90 degrees, to suit most cutting and grinding operations * Wire mesh intake covers are engineered to prevent metal shards from entering motor especially when used in close proximity to other grinders *"Tool-less" wheel cover allows for easy guard adjustment with no need for tools to multiple grinding and cutting angles * Labyrinth construction minimizes dust and debris penetration into the motor and bearings for longer tool life * AC/DC switch for use with alternative power source * Lower vibration rear and side handles includes soft grip for more comfort and control * Externally accessible brushes for easy serviceability * Large rubber tool rest to help protect tool and surfaces from damage * Rugged all metal gear housing for added protection * Protective

more >>
Factory Authorized Outlet
$199.99 See It
5 AC/DC 9Amp Angle Grinder - 9005B

Powerful 9 AMP motor yet light weight for high production work with less fatigue * Ball bearing construction for long tool life * Removable side handle can be installed on either side of tool for operator comfort Makita 5 Angle Grinder

more >>
Max Tool
$139.99 See It
15.0 Amp 9 in. Low Vibration AC/DC Angle Grinder G23SCY

15.0 Amp 9 in. Low Vibration AC/DC Angle Grinder - G23SCY. Wheel Guard - 324267. Side Handle - 322411. Spanner Wrench - 325491. Features User Vibration Protection (UVP) technology that reduces full load tri-axial vibration by up to 30 percent. UVP technology employed via a flexible main handle and side handle that reduces vibration to only 3.3 meters per second squared- the lowest vibration level in its class. Adjustable side handle and main handle covered in soft elastomer grip which absorbs vibration and provides a comfortable and secure grip. Features new 2-part stator coil design that offers 1.5 times the surface area for 25 percent cooler operation. Best in class overload durability. Newly designed gear structure reduces noise level by up to 60 percent. Gear structure lessens kickback effect experienced during start up. 15 amp motor with 1,700 Watts of input power and 10 percent more output power than competitive models at 1,110 Watts. One-touch quick off mechanism provides added safety. Easy to manipulate spindle lock makes it simple to change out accessories as needed. Extended wear carbon brush that lasts 56 percent longer than traditional brushes with an auto stop feature for simple and routine maintenance checks. Dust protected switches and sealed armatures protect the internal components from harmful dust and debris. Lightweight at 11.2 lbs. for easier operation

more >>
CPO Outlets
$193.99 See It
GA7031Y 120 Volt 7" Angle Grinder

Industrial Power Tools Powerful 15.0 AMP motor delivers 8,500 RPM for faster material removal * Rotatable rear handle rotates with just the push of a button, with positive stops every 90 degrees, to suit most cutting and grinding operations * Wire mesh intake covers are engineered to prevent metal shards from entering motor especially when used in close proximity to other grinders *"Tool-less" wheel cover allows for easy guard adjustment with no need for tools to multiple grinding and cutting angles * Labyrinth construction minimizes dust and debris penetration into the motor and bearings for longer tool life * AC/DC switch for use with alternative power source * Lower vibration rear and side handles includes soft grip for more comfort and control * Externally accessible brushes for easy serviceability * Large rubber tool rest to help protect tool and surfaces from damage * Rugged all metal gear housing for added protection * Protective

more >>
Factory Authorized Outlet
$174.99 See It
1873-8 7" Large Angle Grinder with Rat Tail Handle, power-tools

Bosch 1873-8 Specifications: Amperage: 15 No Load RPM: 8,500 Wheel Diameter: 7" Spindle Thread: 5/8"-11 Length: 17.5" Rating: 120V AC/DC Max. Motor HP: 3 Grinding Wheels: 7" Wire Wheel up to: 5" Flared Cup Wheels: up to 5" Bosch 1873-8 Includes: (1) 7" Large Angle Grinder (1) Vibration Control Auxiliary Handle (1) Guard (1) Wheel Guard Bosch 1873-8 Features: Lock-on/off switch - for extended use applications Vibration Control Side and Main Handles Reduces vibration up to 60%, providing uncompromising user comfort for extended periods of work AC/DC capability - extends the versatility of the tool by working from DC outlets such as welders and generators Service Minder brushes - eliminates guesswork, stops the tool when preventive maintenance is requ

more >>
Toolup.com
$155.34 See It
6066-6 7-Inch/9-Inch Sander/Grinder, power-tools

FEATURES: • 3.5 maximum horsepower, 15 amp motor • 7 inch or 9 inch capacity, 6000 RPM, AC-DC • Spiral bevel gearing for performance and durability • Sander may be converted to grinder by using the proper wheel guard This 15 amp, 6000 RPM, 3.5 maximum horsepower sander provides high performance under severe applications. As a sander, this tool can be used with a 7 or 9 inch backing pad for removing paint or rust from metal, plastic or fiberglass surfaces. Spiral bevel gears transfer maximum torque for heavy duty jobs. Spring loaded recessed spindle lock assists in easy accessory changes. Sold as a sander, this tool can be converted to a grinder by purchasing a 7 inch or a 9 inch guard which is easily attached to the tool. Grinding applications remove more material and may be used to shape metal.

more >>
Toolup.com
$185.88 See It
DWE4887 1-1/2" 25,000rpm Paddle Switch Die Grinder with NO Lock on Switch - DWE4887

The DEWALT DWE4887N 1-1/2" Die Grinder (no Lock-on) features a 4.2 Amp, 25,000 rpm motor which provides high power and speed for all 1-1/2" grinding applications. This tool also has AC/DC capacity that works off welding machines and generators for increased productivity and versatility. It offers a convenient paddle switch for easy gripping. This grinder is designed with a single piece collet and nut for hassle free accessory changes - a precision 1/4" collet securely holds all proper accessories (1/8" reducing sleeve as optional accessory). An angled exhaust path directs debris away from user and the small body diameter provides comfortable gripping area. Amp capacity is 4.2 amps, with a no load speed up to 2,500 rpm. Includes: (2) Wrenches, (1) 1/4" collet. DeWALT DWE4887 1-1/2" 25,000rpm Paddle Switch Die Grinder with NO Lock on Switch

more >>
Max Tool
$187.99 See It
DWE402N 4-1/2-inch Small Angle Grinder W/ No Lock-On

The DeWALT 4-1/2 (115mm) Small Angle Grinder features Next Generation 11 Amp AC/DC 11,000 rpm motor providing the best power to weight/size ratio available. Dust Ejection System DeWALT 4-1/2-inch Small Angle Grinder W/ No Lock-On

more >>
Factory Authorized Outlet
$109.99 See It
DWE4887 1 - 1/2" 25,000 rpm Paddle Switch Die Grinder with Lock on Switch - DWE4887

The DEWALT DWE4887 1-1/2" Die Grinder features a 4.2 Amp, 25,000 rpm motor which provides high power and speed for all 1-1/2" grinding applications. This tool also has AC/DC capacity that works off welding machines and generators for increased productivity and versatility. It offers a convenient paddle switch with lock-on button for easy gripping - lock-off prevents accidental start ups. This grinder is designed with a single piece collet and nut for hassle free accessory changes - a precision 1/4" collet securely holds all proper accessories (1/8" reducing sleeve as optional accessory). An angled exhaust path directs debris away from user and the small body diameter provides comfortable gripping area. Amp capacity is 4.2 amps, with a no load speed up to 2,500 rpm. Includes: (2) Wrenches, (1) 1/4" collet. DeWALT DWE4887 1 - 1/2" 25,000 rpm Paddle Switch Die Grinder with Lock on Switch

more >>
Max Tool
$159.99 See It
DWE402 4-1/2-inch Small Angle Grinder

The DeWALT 4-1/2 (115mm) Small Angle Grinder features Next Generation 11 Amp AC/DC 11,000 rpm motor providing the best power to weight/size ratio available. Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool through the air intake vents. DeWALT 4-1/2-inch Small Angle Grinder

more >>
Factory Authorized Outlet
$109.99 See It
Search within results