1 to 20 of  142 products for air antenna

Result for "air antenna"
2.4 GHZ 6 DBI 802.11N DIRECTIO DIRECTIONAL ANTENNA (ITEM ALSO KNOWN AS : CSC-AIRANT2460NPR-)

Free Shipping

2.4 GHZ 6 DBI 802.11N DIRECTIO DIRECTIONAL ANTENNA (ITEM ALSO KNOWN AS : CSC-AIRANT2460NPR-) [air-ant2460np-r-]

more >>
Gemini Computers
$248.71 See It
2.4 GHZ 4DBI/5 GHZ 7DBI DUAL B DUAL BAND OMNI ANTENNA - N CONN (ITEM ALSO KNOWN AS : CSC-AIRANT2547VN-)

Free Shipping

2.4 GHZ 4DBI/5 GHZ 7DBI DUAL B DUAL BAND OMNI ANTENNA - N CONN (ITEM ALSO KNOWN AS : CSC-AIRANT2547VN-) [air-ant2547v-n-]

more >>
Gemini Computers
$212.91 See It
DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC093G35AXXX

Amana DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC093G35AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$639.00 See It
DigiSmart 15,000 BTU Packaged Terminal Air Conditioner PTC153G35AXXX

Amana DigiSmart 15,000 BTU Packaged Terminal Air Conditioner PTC153G35AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$709.00 See It
Tailgater OA8000 Outdoor Over-the-Air Antenna

Money-back Guarantee!

includes retrofit RV Bracket for batwing-style antennas,pole mount Bracket for residential installations,AC to DC power supply, and power Injector,powered over coaxial cable and may also be used with existing antenna power source for retrofits,frequency bands: UHF (470-860 MHz), VHF (47-230 MHz)

more >>
Crutchfield
$59.99 See It
DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC093G50AXXX

Amana DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC093G50AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$669.00 See It
DigiSmart 11,700 BTU Packaged Terminal Air Conditioner PTC123G50CXXX

Amana DigiSmart 11,700 BTU Packaged Terminal Air Conditioner PTC123G50CXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$719.00 See It
DigiSmart 12,000 BTU Packaged Terminal Air Conditioner PTC124G35AXXX

Amana DigiSmart 12,000 BTU Packaged Terminal Air Conditioner PTC124G35AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$679.00 See It
DigiSmart 15,000 BTU Packaged Terminal Air Conditioner PTC153G50AXXX

Amana DigiSmart 15,000 BTU Packaged Terminal Air Conditioner PTC153G50AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$729.00 See It
DigiSmart 7,700 BTU Packaged Terminal Air Conditioner PTC073G25AXXX

Amana DigiSmart 7,700 BTU Packaged Terminal Air Conditioner PTC073G25AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$659.00 See It
DigiSmart 11,700 BTU Packaged Terminal Air Conditioner PTC123G35AXXX

Amana DigiSmart 11,700 BTU Packaged Terminal Air Conditioner PTC123G35AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$669.00 See It
WINEGARD SENSOR OFF AIR AMPLIFIED ANTENNA FOR -29%

Up to 25% off TVs 32" & under

Winegard Sensar III GS-2200 - TV antenna - outdoor - UHF, VHF

Sears
$69.99 $49.64 See It
DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC093G50CXXX

Amana DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC093G50CXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$699.00 See It
DigiSmart 11,700 BTU Packaged Terminal Air Conditioner PTC123G25CXXX

Amana DigiSmart 11,700 BTU Packaged Terminal Air Conditioner PTC123G25CXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$699.00 See It
CM7001 ATSC/QAM Digital HD Antenna Tuner CM-7001

This high end ATSC Tuner is for use with the Over-the-air TV Antennas and Clear QAM Cable signal. One of the few antenna tuners on the market that output HDMI, with optical audio.

more >>
SolidSignal.com
$122.99 See It
DigiSmart 11,700 BTU Packaged Terminal Air Conditioner PTC123G25AXXX

Amana DigiSmart 11,700 BTU Packaged Terminal Air Conditioner PTC123G25AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$669.00 See It
DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC093G25AXXX

Amana DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC093G25AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$639.00 See It
Antennas Direct 40" Universal J-Mount

Wall Mount - Device Supported: Antenna

more >>
$34.99 - $36.99 Compare Prices at 2 stores
DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC093G25CXXX

Amana DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC093G25CXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$669.00 See It
Commercial Microwave - 1,000 Watt - Four Power Levels

The Amana RCS10DSE Commercial Microwave is designed for moderate use in self-service settings, including employee break rooms, convenience stores and customer vending areas. It offers 1000 watts of cooking power, and the motor driven top antenna delivers even and efficient heat distribution. The spacious cabinet can accommodate everything from a small portion to a 14" platter. When cooking is interrupted, the ten minute light-up dial timer resets to zero. The tempered glass door and fully lit interior allow you to view food throughout the heating process. This durable microwave has a stainless steel interior and exterior, so it's easy to keep clean. A front air filter promotes optimum performance in foodservice environments. The RCS10DSE Commercial Microwave will deliver years of reliable service in your facility. Key Features Accommodates platters up to 14" Light-up dial timer Fully lit interior Easy to clean Specifications Power: 1000 watts Usage: Moderate - 50 to 125 uses per day Power levels: Four Exterior material: Stainless steel Interior material: Stainless steel Cabinet size: 1.2 cubic ft Fully assembled Warranty: One year limited

more >>
SCHOOLSin
$356.95 See It