The Milton 3/8in. Port Air Line Regulator features a micro filter to remove harmful oil/water condensate, pipe scale, dirt and rust from compressed air systems. Regulator is used as a pre-filter to insure high efficiency and long element life in
Optional Filter, Regulator, and Lubricator for Drum Karrier. Includes on/off valve for air-powered models.
Modular Coalescing-Regulator System filters air in 2 stages for debris-free "air power" 1/2"-NPT, 2-stage system includes moisture and oil separators to ensure no debris enters your air tools or spray equipment. First stage removes moisture and particulates Second stage removes oil aerosols Includes sight glasses and drain valves
Your air tools will last longer, have fewer problems and need fewer repairs when you use Ingersoll Rand's high-quality filters, regulators, and lubricators. CFM 90, Includes 1 Filter, 1 Regulator, Max. PSI 150, Size 3/8in., Application Filter,
Your air tools will last longer, have fewer problems and need fewer repairs when you use Ingersoll Rand's high-quality filters, regulators, and lubricators. CFM 172, Includes 1 Filter, 1 Regulator, Max. PSI 150, Application Filter, regulator, Size
This replacement air filter with 1/2in. fitting works with Item# 156440. Max. PSI 160, Application Filter, Includes 1 Filter, Inlet Diameter in. 1/2. Replacement air filter for 1/2in. NPT air filter, lubricator and regulator, Item# 156440. Model
Extend the life of your air tools by properly lubricating them and preventing damaging moisture from entering. A must for any garage that runs air tools. The coalescing moisture separator removes aerosols down to 40 microns. The lubricator automatically injects oil into your tools and the handy sight glasses makes routine maintenance a snap. This 3/8” NPT Eastwood modular system allows you to remove components without disassembling the entire system. This system includes a moisture separator, lubricator, 150psi regulator and manual shut-off valve.
Utilize this brass regulator inlet nipple for various gas regulators with a 1/4 NPT connection. The inlet nipple provides fast and semi permanent connection, however not as permanent installations. They are made up of a brass material for maximum durability. CGA No.: CGA-580, CGA-510, CGA-500, CGA-590 Gas Type: Argon, Helium, Nitrogen, Air, Acetylene (POL), Medical Mixtures. Includes: Filter. Length: 3 1/2 in. Material: Brass. Thread Size: 1/4 in (NPT). (Western Enterprises 15-4SF)
$50+ Orders Ship Free
Air Wipe Kit, General Purpose, FNPT Inlet 1/4 In, Number of Inlets 1, Air Slot Gap 0.002 In, Air Consumption 19.1 SCFM, Max dBA 76, Aluminum, Max Temp 400 F, Overall Depth 1.13 In, Inside Dia 1 In, Outside Dia 3.75 In, Includes Shim Set, Filter, Pressure Regulator and Filter/Regulator Mounting...
Utilize this brass regulator inlet nipple for inert gases, flammable gases, Air regulators with a 1/4 NPT connection. The inlet nipple provides fast and semi permanent connection, however not as permanent installations. They are made up of a brass material for maximum durability. CGA No.: CGA-680, CGA-695, CGA-702. Gas Type: Inert Gases, Flammable Gases, Air. Includes: Filter. Material: Brass. Thread Size: 1/4 in (NPT). (Western Enterprises 680-3SF)
Eastwood's modular air management systems were exclusively designed to deliver the purest air with maximum lubricity. This 1/2“ NPT matched system uses a state of the art connector system that allows you to remove components without disassembling the entire system. The system leads off with a moisture separator that removes particulates down to 40 microns. Then through a high quality regulator with a 0-160PSI gauge. The air then runs through steel constructed lubricator with 3-position adjustment knob and sight glass. 10 oz reservoir capacity. 1/2“ NPT. MADE IN USA
Ingersoll Rand C38231-600 3/8" Filter Regulator -Lubricator Combination. Keep your tools water and dirt free, your air tools will last longer, have fewer problems and need fewer repairs Ingersoll Rand 3/8" Filter - Regulator - Lubricator Combination - Black/Gray
Air-operated pump with 2in. NPT bung adapter and self-closing spigot. Designed to dispense engine and gear oils up to 140 SAE, hydraulic fluid, transmission fluid and 100 ethylene glycol. Recommend the use of a filter regulator with gauge to control
Utilize this brass regulator inlet nipple for oxygen regulators with a 1/4 NPT connection. The inlet nipple provides fast and semi permanent connection, however not as permanent installations. They are made up of a brass material for maximum durability. CGA No.: CGA-580, CGA-510, CGA-500, CGA-590. Gas Type: Argon, Helium, Nitrogen, Air, Acetylene (POL), Medical Mixtures. Includes: Filter. Material: Brass. Thread Size: 1/4 in (NPT). (Western Enterprises 15-3SF)
Cressi Sub Ellipse Black MC5 Diaphragm Yoke Regulator The MC5/Ellipse Black combination delivers an exceptional price to performance value. A trimmed down version of the MC9 first stage, the MC5 uses the same innovative technology, but in a compact package great for all-around diving. The lightweight hyper-balanced diaphragm first stage is armored in a protective elastomer shell and uses a self-lubricating jacketed cylinder to prolong service life. The Ellipse Black delivers smooth breathing, incorporating the natural advantage of the elliptical diaphragm. 1st stage MC5 The MC5 first stage, which was entirely developed by the Cressi Design and Development Centre, is a diaphragm first stage of extremely low weight and size with highly technological content. The sliding cylinder of the piston is sheathed with a special self-lubricating polymer which reduces internal friction to a minimum and totally eliminates any possible oxidization that could alter the performance of the regulator over time. The high performance is further increased by a special assistance chamber that triggers a strong Venturi effect between the central diffuser and the intermediate pressure outlets. The hyper-balanced diaphragm mechanism not only maintains the performance of the regulator when the pressure in the tanks varies and depth increases, but even increases performance in the final stage of the dive, notoriously the most critical. A sintered filter with a greater surface area traps the impurities in the incoming air. The low and high pressure outlets are pre-oriented for ideal placement of the hoses. The small cylindrical body is completely covered by a protective elastomer shell. Dismantlement and maintenance are quick and easy thanks to the new INT yoke connection system or the internally threaded DIN fitting. TECHNICAL FEATURES Hyper-balanced diaphragm first stage 3 pre-oriented low pressure outlets 1 high pressure outlet Sintered filter with greater surface area First stage completely protected by an elastomer shell Available with INT yoke or with DIN 200/300 bar fitting Weight of MC5 with INT yoke: 550 g Weight of MCR with DIN 300 bar fitting: 450 g 2nd Stage Downstream system Adjustable venturi effect Patented elliptical diaphragm Patented antifriction lever Swinging valve shaft with sealing washer Big purge button No resonance material for the body Cam-lock Weight without hose: 5.64 Ounces Combination Performance: Average cracking effort 5.4mbar Average breathing effort 1.15 J/l Certification: EN250/2000 for cold water Please Allow An Extra Five Shipping Days For Cressi Items As They Are Very Popular
The XS2/AC2 Regulator is an exceptionally dependable non-balanced Flow-by-Piston designed 1st stage Regulator that is a great choice as a new divers rig, or for use as a stage bottle regulator system. The 1'st stage has 1 HP port and 4 LP ports, and is made from Marine Grade Chromed Brass for long life and durability. A conical filter is used which has greater surface area for higher air flow characteristics through the 1'st stage regulator. The XS2 Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers, and has a dependable downstream demand valve mechanism. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Regulator comes with a comfortable silicone mouthpiece. The XS2 Compact AC2 Regulator weighs 35oz (994g) with the Hose, comes with an Owner's Manual and a limited lifetime warrant
Cressi Sub Ellipse Steel AC10 Piston Yoke Regulator This regulator is made up of the 2nd stage Ellipse, with steel cap (Steel version), combined with the Balanced Piston 1st stage The AC10 1st stage is the latest version of the Cressi balanced piston model, manufactured for many years and highly appreciated for its exceptionally durable and reliable characteristics. 1st stage AC10 The 1st stage is the renowned Cressi AC10 balanced piston model. It can be supplied with international yoke or with 200 or 300 bar DIN connections. This balanced piston first stage means performance remains constant, irrespective of depth and pressure from the tanks. With the continuous reviews and improvements over the years all the air passages inside the first stage have been completely redesigned and considerably increased so as to give the excellent performance that AC10 offers today. Alongside this excellent performance, the AC10 boasts simple mechanics, resistance to wear and tear and requires so little upkeep that it has become a product with legendary reliability. It has some 5 low-pressure ports located right around a swivel head, which guarantees rational hose positioning on any valve. We must also point out the quick and really handy external system to regulate intermediate pressure, which can be calibrated in a few seconds with a normal Allen key and the extremely powerful sintered filter system to filter air from the tanks. Technical features AC10 balanced piston 1st stage Supply pressure (INT connection) 0-232 bar Supply pressure (DIN connection) 0-200 or 0-300 bar Calibration pressure 9.5-10 bar Calibration adjustment range +/- 0.5 bar Air supply 2800 l/min (*) High pressure ports (HP) 2 Low pressure ports (LP) 5 (*)values measured at LP port with second stage connected and 150 bar pressure in the tanks.
Get professional results quickly. Comfortable handpiece with quick-change tool holders lets you do carving, fine line engraving and metal removal. Powered by your compressor. Mfg: Grs SPECS: Handpiece; 4½'''' (11cm) long. Requires 1.0 CFM at 50 psi, 120 psi maximum. Includes; handpiece, three tool holders, foot control, air filter/regulator, six tool bits, air lines and instructions.
IR Air Line Regulator/Filters are designed to deliver the pressure you need, with precise control & remove airborne solid to 5 microns & liquid contaminants which can plug small orifices, & affect the systems performance. Units provide consistent air pressure from 5 to 125 Psi. as required for specific air equipment. 175 Max Psi. Model Specifications: 3/8" NPT Female Connection, Flow Rate 135 SCFM.Specifications: * 3/8 in. filter-regulator * 175 PSI max. * 135 CFM max. * 5 micron * 6 oz. bowl size IR Air Line Regulator/Filters are designed to deliver the pressure you need, with precise control & remove airborne solid to 5 microns & liquid contaminants which can plug small orifices, & affect the systems performance. Units provide consistent air pres
Clean regulator air = precise control. Locking adjustment, 0-100 psi (0-7 kg/cm3) gauge, polycarbonate bowl with easy open drain. 1/8“ NPT inlet and outlet. Includes two 1/4“ NPT adaptors. One year warranty. Imported.