1 to 20 of  100 products for ak47 rear sight

No exact matches found for ak47 rear sight

100 similar items found

Ak-47/74 Recoil Compensating Folding & Collapsible Buttstock - Sb M4 Folding/Collapsible Stock W/Shock

Adjustable black collapsible stock System uses a rugged Galil folding mechanism Adapts AK-47 rifles to enable collapsible stocks that fold to the side Built-in recoil compensating mechanism Includes GLR-16 buttstock Solid steel adapter bolts to rear trunnion Designed for stamped receivers Mfg: The Mako Group SPECS: Galil folding mechanism, For AK-47 rifles, GLR-16 buttstock, Solid steel adapter, Built-in recoil compensator.

more >>
Brownells
$393.55 See It
Ak-47 7.62x39 Standard Receiver Flat - Ak-47 Fixed Stock Flat, W/O T-Holes

STANDARD AK-47 7.62x39 For building a standard, fixed-stock AK-47/AKM in 7.62x39. Use with the Romanian and most common variant kits. 1/8" alignment pin holes are pre-drilled. Available with or without front and rear trunnion holes pre-punched.Precision-cut, ready-to-bend steel flats save time and frustration when building a custom AK. No more trying to salvage a beat-up receiver from a "donor" gun. These flats are stamped from the correct 1mm thick sheet steel, with top rails pre-bent, stepped, and trimmed on CNC equipment. Hammer and trigger holes are slightly undersized, ready for precise final reaming after bending; use 7mm and 5mm chucking reamers. All f Mfg: Ak Builder SPECS: Annealed 4130 steel, in-the-white. 1mm (.040") thick. Includes instructions.

more >>
Brownells
$19.99 See It
Ak-47/Akm 30rd 7.62x39 Pmag Moe Magazine - Pmag 30 Ak/Akm Moe 10 Pack

The Magpul PMAG 30 AK MOE is a lightweight, high reliability 30-round polymer magazine for 7.62x39 Kalashnikov pattern rifles (AK-47, AKM, AKS, SIG556R and others.) It features a removable floorplate, constant curve geometry, and a high-reliability/low-friction follower for the affordable performance you expect from a MOE PMAG. Self-lubricating anti-tilt follower for increased reliability. Paint pen dot matrix to increase durability of magazine identification. Strong, slim ?oorplate design that retains positive magazine handling and easy disassembly.y disassembly. Mfg: Magpul Impact and crush resistant all polymer body Constant-curve internal geometry for smooth feeding Anti-tilt, self-lubricating follower for increased reliability Long life stainless steel spring Ribbed gripping surface and aggressive front and rear texture for positive ma

more >>
Brownells
$124.99 See It
Ak-47 Recoil Buffer

Polymer buffer fits on the bolt spring to reduce bolt slap, felt recoil, and overall wear and tear. Provides a cushion that prevents the bolt from making contact with the receiver to reduce wear on both components. Installs easily over rear of spring assembly; no permanent modifications to rifle required. Good for at least 5,000 firing cycles. Mfg: Power Custom SPECS: Polymer, black. ½" (1.3cm) long, 15/16" (2.4cm) wide, 1¼" (3. 2cm) high. Fits all models of AK-47, Mak-90, Galil, and Valmet.

more >>
Brownells
$9.99 See It
Ak-47/Akm 30rd 7.62x39 Pmag Moe Magazine - Pmag 30 Ak/Akm Moe, 7.62x39 Magazine

The Magpul PMAG 30 AK MOE is a lightweight, high reliability 30-round polymer magazine for 7.62x39 Kalashnikov pattern rifles (AK-47, AKM, AKS, SIG556R and others.) It features a removable floorplate, constant curve geometry, and a high-reliability/low-friction follower for the affordable performance you expect from a MOE PMAG. Self-lubricating anti-tilt follower for increased reliability. Paint pen dot matrix to increase durability of magazine identification. Strong, slim ?oorplate design that retains positive magazine handling and easy disassembly.y disassembly. Mfg: Magpul Impact and crush resistant all polymer body Constant-curve internal geometry for smooth feeding Anti-tilt, self-lubricating follower for increased reliability Long life stainless steel spring Ribbed gripping surface and aggressive front and rear texture for positive ma

more >>
Brownells
$13.25 See It
Ak-47/74 Enhanced Safety - Enhanced Safety

FEATURES: Extended lower pad Bolt hold open notch Precision stamped from 1mm 1050 steel Heat treated to 50c One piece exterior construction Made in USA Matte black painted finish Fits standard AK-47 and AK-74 riflesBENEFITS: Extended safety allows for easier manipulation using the firing hand Bolt hold open notch allows for the AK bolt to be locked to the rear by holding the charging handle Heat treated one piece outer construction will hold up to repeated use Matte black painted finish matches traditional AK finishes Mfg: Krebs Custom, Inc. SPECS: Fits AK Stamped receiver rifles. Not for Saiga or Underfolders.

more >>
Brownells
$58.99 See It
Ak-47/Akm 30rd 7.62x39 Magazine - Ak-47 Magazine

Double-stack magazine of lightweight injection-molded polymer is reinforced with a stainless steel cage molded into the upper body for superb strength and reliability. Designed with a permanently attached base plate to form an ultra-rigid, five-sided box that's highly resistant to breakage when ejected onto hard surfaces. Aggressive horizontal serration on front and rear, plus ribs on the sides, ensure a positive purchase to aid fast mag changes. Low-friction, semi-floating follower has slots for easy access to interior for cleaning with a power blaster or immersion in hot, soapy water. Heat-treated, stress-relieved, mil-spec corrosion-resistant coated chromium-silicon spring. Mfg: Us Palm SPECS: Injection-molded reinforced polymer, black. 9" (23cm) high, 2" (5cm) wide, 13/16" (3cm) thick. 7 oz. wt. Fits AK-47 and clones chambered in 7.62 x 39mm.

more >>
Brownells
$29.99 See It
Ak-47 7.62x39 Standard Receiver Flat - Ak-47 Fixed Stock Flat, W/T-Holes

STANDARD AK-47 7.62x39 For building a standard, fixed-stock AK-47/AKM in 7.62x39. Use with the Romanian and most common variant kits. 1/8" alignment pin holes are pre-drilled. Available with or without front and rear trunnion holes pre-punched.Precision-cut, ready-to-bend steel flats save time and frustration when building a custom AK. No more trying to salvage a beat-up receiver from a "donor" gun. These flats are stamped from the correct 1mm thick sheet steel, with top rails pre-bent, stepped, and trimmed on CNC equipment. Hammer and trigger holes are slightly undersized, ready for precise final reaming after bending; use 7mm and 5mm chucking reamers. All f Mfg: Ak Builder SPECS: Annealed 4130 steel, in-the-white. 1mm (.040") thick. Includes instructions.

more >>
Brownells
$21.99 See It
Ak-47/Akm/Ak-74 Trunnion Riveting Tool - Trunnion Riveting Tool

Heavy bench tool securely holds and properly aligns stamped AK receivers for installing front and rear trunnion rivets and center supports. Allows proper peening of all swell neck trunnion rivets including the rear rivet on sidefolder and underfolder trunnions. Protects receiver from accidental crushing when installing center support rivets. Will not install triggerguard rivets; use the Triggerguard Rivet Jig sold below.Heavy-duty bench tools were designed by the Kalashnikov experts at AK-Builder to build custom AK-pattern rifles using receiver flats and commercial parts to achieve professional results. Each jig and fixture is manufactured to correct dimensions to ensure properly-fitting f Mfg: Ak Builder SPECS: 4140 steel, black oxide finish. Includes bench tool, rivet head supports, four dimpling heads, and instructions.

more >>
Brownells
$259.99 See It
Ak-47/-74/Akm/Saiga Front Sight Tool - Standard Ak Sight Tool

Hardened steel tool enables fast, easy, precise windage and elevation adjustment on a wide variety of Kalshnikov-type rifles. The full-circle clamp is far stronger than generic C-clamps for secure, positive contact with the sight tower to adjust the sight for windage. Viewing port in the circle clamp gives you a clear view of the drum for perfect alignment. Remove the T-handle from the circle clamp and use it as a wrench to adjust the sight post for elevation. Sliding handle lets you select the length that gives you the right amount of leverage in either mode to get even a "frozen" sight to move. No extra tools required. Standard model fits AK-47 and clones. Gunsmith model has a Mfg: Magna-Matic Corporation SPECS: Steel. Fits AK-47, AKM, AK-74, RPK-47/-74, commercial Saiga rifles, and most Eastern Bloc AK variants and clones. Standard 1¾" (4.4cm) O.D., ¾ " (cm) thick, with 4½" (11.4cm) long handle. Gunsmith 2¼" (5.7cm) O.D., 1" (2.5cm

more >>
Brownells
$30.99 See It
Sks/Ak-47 Front Sight Tool - Ak-47/Sks Sight Tool

Precision machined, all steel C-clamp easily adjusts front sight windage and elevation on most AK-47 and SKS variants. Threaded T-handle provides the force needed to move even stubborn front sights. Opposite end of T-handle fits elevation post. Made in the U.S.A. Mfg: Tapco Weapons Accessories SPECS: Steel, matte black. Clamp - 1½ (3.8cm) long, 5/8'''' (1.5cm) wide, 1½ (3.8cm) high. T-handle - 2¼ (5.6cm) wide x 23/8'''' (6.1cm) high. Fits most AK-47 and SKS variants.

more >>
Brownells
$16.49 See It
1911 Combat Carry Adjustable Rear Sights - Lpa Cut 1911 Rear Sight

Enjoy the accuracy of a fully adjustable, competition-style rear sight in a package suitable for daily carry. Beveled edges on sight body and radiused corners on blade minimize chances of snagging on clothing or holster. Blade, sight body, and base are EDM-wire machined from high-grade, 4140 billet steel, then heat-treated to Rc 28-32 to retain the extra-tight tolerances. Front hinge pin is hardened to Rc 60 for reliable, long-lasting service without breakage. Fine serrations on the rear sight blade surface reduce light reflection to enhance sight pick up in all light conditions. Consistent, click adjustable detents for windage and elevation provide precise, repeatable settings. Mfg: Kensight Mfg. SPECS: 4140 steel, blued, matte finish. BM #1 - Fits pistols with the Bo-Mar BMCS rear sight dovetail. BM #1 Oversized Dovetail is .010" oversized to allow custom-fitting in loose Bo-Mar BMCS slide cuts. LPA Cut 1911 - Fits Springfield Armory, Para-Ordnance, Nowlin, High Standard, Olym

more >>
Brownells
$64.99 See It
1911 Adjustable Rear Sights - Sti Adjustable Sight

Precision-machined steel rear sights give ideal sight picture for target or carry, with low profile and rounded contours that resist snagging. Flush-mounted, positive-click windage and elevation screws won't get knocked from your selected settings. Flat blade with anti-glare serrations and wide notch provide a clear, fast sight picture that is easy to acquire under stress. Adjustable sits low on the slide for quick alignment, yet provides a precise sight image. Fits Bo-Mar BMCS slide cut. Tactical Adjustable combines the adjustability of a target sight with the compact, snag-free profile of a fixed tactical sight that fits a standard Novak rear sight slide cut. Beveled and rounded e Mfg: Sti SPECS: Steel, matte black finish. Installation may require milling, drilling, and tapping of slide. Adjustable Blade: .434" (11mm) high, .762" (19.3mm) wide. Notch: .110" (2.8mm) wide. Fits Bo-Mar BMCS (BM#1) 60° x .359" cut. Tactical Adjustable Blade:

more >>
Brownells
$66.99 See It
''''creedmoor'''' Rear Tang Sights - Soule Long Range 4'''' Tang Sight

Named after the famous range on Long Island that hosted many long-range rifle competitions in the 1870s and '80s, the Creedmoor ladder-type sight is fully adjustable for windage and elevation and works equally well on cartridge rifles and muzzleloaders. Sight is precision machined from steel and attaches to tang with supplied setscrews and folds down when not in use. The Universal model is available in middle-range 2" and long-range 3" heights. The windage adjustment mechanism is on the eyepiece, allowing the eyepiece to dropped close to the base for close-in shots. The Soule model provides maximum adjustability to fit any hunting or target shooting conditions. Elevation is a Mfg: Pedersoli Davide & C. SPECS: Steel, blued. Elongated rear mounting hole allows installation on most rifles. Drilling and tapping of tang may be required. Distance between mounting holes 2.20"-2.29" (5.6-5.8cm). Mounting screws and installation instructions included.

more >>
Brownells
$269.99 See It
1911 Fiber Optic Rear Sights - Fiber Optic Lo-Mount Rear Sight, Green, Fits Colt 1911

Advanced light gathering properties of fiber optic rods make maximum use of ambient light to provide a bright glow that stands out against dark backgrounds and puts you on target fast, even in low-light or high-stress situations. Fronts and rears sold separately, so you can create a custom, three-dot, fiber optic system tailored to your shooting needs. Available with red or green inserts. Lo-Mount rear sights have radiused edges that won't snag on holster or clothing. Colt rear sight fits Government model; requires milling, installation instructions included. Mfg: Novak SPECS: Machined steel, matte black finish with fiber optic rods in red or green. Colt Rear: 1" (2.5cm) long, .72" (1.8cm) wide, .46" (1.17cm) high, with .125" (3.2mm) wide notch. Fits Government model; milling required, instructions included. Kimber - Rear: Green inser

more >>
Brownells
$49.99 See It
1911 Combat Carry Adjustable Rear Sights - Bm #1 Rear Sight

Enjoy the accuracy of a fully adjustable, competition-style rear sight in a package suitable for daily carry. Beveled edges on sight body and radiused corners on blade minimize chances of snagging on clothing or holster. Blade, sight body, and base are EDM-wire machined from high-grade, 4140 billet steel, then heat-treated to Rc 28-32 to retain the extra-tight tolerances. Front hinge pin is hardened to Rc 60 for reliable, long-lasting service without breakage. Fine serrations on the rear sight blade surface reduce light reflection to enhance sight pick up in all light conditions. Consistent, click adjustable detents for windage and elevation provide precise, repeatable settings. Mfg: Kensight Mfg. SPECS: 4140 steel, blued, matte finish. BM #1 - Fits pistols with the Bo-Mar BMCS rear sight dovetail. BM #1 Oversized Dovetail is .010" oversized to allow custom-fitting in loose Bo-Mar BMCS slide cuts. LPA Cut 1911 - Fits Springfield Armory, Para-Ordnance, Nowlin, High Standard, Olym

more >>
Brownells
$67.99 See It
Marlin & Winchester Lever Action Fire Sights - Dovetail Fire Sights

All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. For Marlin and Winchester lever action rifles. Dovetail replaces factory front and rear sights. Rear sight is screw adjustable for elevation and drift adjustable for windage; has two, green, fiber optic dots. Front has red, fiber optic rod. FP sight sets have a Foolproof, micro-adjustable, peep Mfg: Williams Gun Sight SPECS: Aluminum, black anodized. Dovetail fits all Winchester and Marlin lever actions with ramped front sights. FP-94/36 fits Win. 94 top eject and models 55, 63, 64, and 65; Marlin 36, 336, 1894, 1895 and 444. Will not fit Win. 94/22. Requires two holes in the left side of the receiver and will

more >>
Brownells
$33.99 See It
Ruger 10/22 Gi-Style Aperture Sights - Tsr200 10/22 Sight Set

Replacement sight sets give your 10/22 a longer sight radius for improved accuracy potential, plus the same sight picture as an AR-15/M16 with military-issue sights. Installation requires no gunsmithing, no drilling/tapping, and no permanent alterations to the rifle. Rear sight mounts using the factory-provided holes for a scope base. All-steel front sight assembly has a standard detent-locking M16 post surrounded by protective ears that guard it from damage and misalignment. User may substitute any aftermarket post that replaces the standard A2. TSR100 set's rear sight is adjustable for windage and features close-range and long-range flip-up apertures similar to the M16A2 sight. Fo Mfg: Tech Sights, Llc. SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90" (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94" (24mm) tall. Sold as front/rear sight sets. Includes mounting screws.

more >>
Brownells
$69.99 See It
Fiber Optic Front Sights - Fiber Optic Front Sight, Red, .175'''' High, Fits Colt 1911

Advanced light gathering properties of fiber optic rods make maximum use of ambient light to provide a bright glow that stands out against dark backgrounds and puts you on target fast, even in low-light or high-stress situations. Fronts and rears sold separately, so you can create a custom, three-dot, fiber optic system tailored to your shooting needs. Available with red or green inserts. Front sight can also be used with Novak's plain, wide-notch rear. Kimber and Taurus front sights are the same height as factory sights and fit factory dovetails; no machining required. Mfg: Novak SPECS: Machined steel, matte black finish with fiber optic rods in red or green. Colt Front: Blade is .64" (1.6cm) long, .127" (3.2mm) wide. Fits Government model; milling required, instructions included. Kimber - Front: Red insert. Blade is .650" (16.5mm) long, .125" (3

more >>
Brownells
$41.99 See It
Marlin Rimfire Fire Sights - Marlin Mod. 60 Fire Sights

Dovetail sights replace the factory open sight sets on your Marlin rimfire. U-shaped, green, fiber optic, rear sight contrasts well with the red, front bead. Adjustable for windage and elevation. Mfg: Williams Gun Sight SPECS: Aluminum, black anodized. Model 60 also fits 915Y, 925, 925M, 981T, and 983T.

more >>
Brownells
$29.99 See It
Search within results
  • Find by Price
    • $ to $