1 to 20 of  100 products for amana condensing unit

No exact matches found for amana condensing unit

100 similar items found

2188874 | Whirlpool Refrigerator Condenser Fan Motor Replacement

Replacement Condenser Fan Motor used on some Amana, Crosley, Estate, Ikea, Inglis, Jenn Air, Kenmore, KitchenAid, Maytag, Roper and Whirlpool Refrigerator models. Directly Replaces: 2188874, 1065075, AH968756, EA968756, PS968756, AP3778594. Specifications: Approx. 3.125"Wx 3.125"D x 4.125"L. 0.5 lbs. Diagnosis and Repair Tips Diagnosis and Repair Tips Repair Skill Level: Failure Symptoms: Poor cooling in both sections, but especially in the refrigerator section. How to test: Measure voltage at the fan motor wire terminals using a multimeter. If voltage is present, the motor is faulty. Often times, the fan blade may be manually turned and it may continue slowly or start turning by itself. That is an accurate way to test without the use of a meter. Repair Tip: Lubricating the motor almost never helps long term, the motor should be replaced. When installing the fan blade, make sure it is not pushed onto the motor shaft too far as it may bind and not turn smoothly. Search Appliance Repair Forum for related posts. Disclaimer: Information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the information referred to are beyond control, ApplianceRepairForum.com and Appliance Zone, cannot be held liable for results obtained or arising from use or reliance on such information. The User assumes responsibility associated with making test measurements, adjustments, parts replacements and any other action necessary to perform any recommended procedures. It is the responsibility of the User to ask for clarification if a recommendation is not fully understood, including the risks and hazards associated with the recommended procedures.

more >>
Appliance Zone
$50.50 See It
Refrigerator Condenser Fan Shroud Screw - 67006425

This part fits over 864 refrigerator models, within the following brands: Amana, Crosley, Dacor, GaggenauIkea, Inglis, Jenn-Air, KenmoreKenmore Elite, Kitchenaid, Magic ChefMaytag, Whirlpool; ; ; To schedule installation, go to SearsHomeServices.com, or c

more >>
Sears Parts Direct
$7.27 See It
SRC-10H Air Cooled Remote Condensing

The Air Cooled Remote Condensing Unit SRC-10H from Hoshizaki is a durable and reliable remote condenser for cublet ice machines Remote condensers are a great way to limit the amount of noise and heat produced by an ice machine while increasing its ef...

more >>
AppliancesConnection
$1,550.00 See It
URC-5F 21" Air Cooled 115V Remote Condensing

The Air Cooled Remote Condensing Unit URC-5F is a remote condenser from Hoshizaki Remote condensers are a great way to limit the amount of noise and heat produced by an ice machine while increasing its efficiency and saving money on your energy bill ...

more >>
AppliancesConnection
$710.00 See It
URC-21F Air Cooled Remote Condensing

The Air Cooled Remote Condensing Unit URC-21F is a durable and reliable remote condenser for higher production ice machines from Hoshizaki Remote condensers are a great way to limit the amount of noise and heat produced by an ice machine while increa...

more >>
AppliancesConnection
$1,137.00 See It
URC-14F Air Cooled Remote Condensing

The Air Cooled Remote Condensing Unit URC-14F is a durable and reliable remote condenser from Hoshizaki Remote condensers are a great way to limit the amount of noise and heat produced by an ice machine while increasing its efficiency and saving mone...

more >>
AppliancesConnection
$790.00 See It
SRK-7H Air Cooled Remote Condensing

The Air Cooled Remote Condensing Unit SRK-7H is a remote condenser from Hoshizaki Remote condensers are a great way to limit the amount of noise and heat produced by an ice machine while increasing its efficiency and saving money on your energy bill ...

more >>
AppliancesConnection
$1,222.00 See It
URC-22F Air Cooled Remote Condensing

The Air Cooled Remote Condensing Unit URC-22F is a durable and reliable remote condenser for higher production ice machines from Hoshizaki Remote condensers are a great way to limit the amount of noise and heat produced by an ice machine while increa...

more >>
AppliancesConnection
$1,130.00 See It
URC-23F Air Cooled Remote Condensing

The Air Cooled Remote Condensing Unit URC-23F is a durable and reliable remote condenser for higher production ice machines from Hoshizaki Remote condensers are a great way to limit the amount of noise and heat produced by an ice machine while increa...

more >>
AppliancesConnection
$1,490.00 See It
ICE1007HW ICE Series Modular Half Cube Ice Machine with Water Condensing Unit Filter-Free

The Ice-O-Matic air cooled half cube ice maker features a built-in antimicrobial protection designed to fight against bacterial growth resulting in a cleaner unit and cleaner ice This ice maker also comes with a harvest assist feature to ensure consi...

more >>
AppliancesConnection
$4,488.00 See It
ICE1007FW ICE Series Modular Full Cube Ice Machine with Water Condensing Unit Filter-Free

The Ice-O-Matic air cooled full cube ice maker features a built-in antimicrobial protection designed to fight against bacterial growth resulting in a cleaner unit and cleaner ice This ice maker also comes with a harvest assist feature to ensure consi...

more >>
AppliancesConnection
$4,488.00 See It
DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC094G35AXXX

Amana DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC094G35AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$659.00 See It
NME954-RHS-A/C Remote Condenser For F1222L, FME1204RLS, N0922L Ice Makers, Outdoor, 208/1V -53%

The Remote Condensing Unit by Scotsman: Remote Condenser for F1222L, FME1204RLS, N0922L Ice Makers, R-404A, 208-230v/60/1-ph (designed for outdoor installation).

more >>
KaTom
$6,305.00 $2,964.00 See It
DigiSmart 7,700 BTU Packaged Terminal Air Conditioner PTC074G25AXXX

Amana DigiSmart 7,700 BTU Packaged Terminal Air Conditioner PTC074G25AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$629.00 See It
DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC094G25AXXX

Amana DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC094G25AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$659.00 See It
Condensate Return Unit 36 Gal 45 Gpm

Hoffman Condensate Return Unit, 36 Gal, 45 GPM SCC4A Condensate Return Unit Condensate Return System Condensate Return Unit, Duplex, Tank Material Cast Iron, Receiver Size 36 Gal. Number of Pumps 2, EDR Rating 45000, Length 34 1/2 In. Width 33 1/2 In....

more >>
Zoro
$10,725.39 See It
SCC1 Condensate Return Unit, 14 Gal, 15 GPM

Condensate Return Unit, Duplex, Tank Material Cast Iron, Receiver Size 14 Gal., Number of Pumps 2, EDR Rating 15000, Length 29 3/8 In., Width 22 31/32 In., Height 35 In., Discharge Pressure 30 PSI, Pump Flow 15 GPM, Max. Head 72 Ft., Mechanical Alternator

more >>
Zoro
$5,985.02 See It
DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC094G50AXXX

Amana DigiSmart 9,000 BTU Packaged Terminal Air Conditioner PTC094G50AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$679.00 See It
ICEU220 Self-Contained Cube Ice Machine with Condensing Unit Integrated Storage

The ICEU220 is a self-contained cube ice maker with newly redesigned practical features that make it even more reliable and carefree to operate With durable stainless steel top panel and convenient slide-away door it is perfect for bars wait stations...

more >>
AppliancesConnection
$2,184.00 See It
DigiSmart 7,700 BTU Packaged Terminal Air Conditioner PTC074G35AXXX

Amana DigiSmart 7,700 BTU Packaged Terminal Air Conditioner PTC074G35AXXX. Raising the bar in PTAC Controls Designed exclusively for Amana PTAC units, DigiSmart technology has dramatically raised the bar in PTAC controls. Your guests will appreciate its large, easy-to-read LED readout that allows them to check the temperature with a quick glance and, if desired, to change the setting to a specific temperature by pressing a button. The ability to select a precise temperature helps your guests avoid over-cooling their rooms, a situation that often occurs with knob-type controls, which are less precise. What's more, the DigiSmart Control Board offers many programmable features and self-diagnostics that help facility personnel better manage the care and maintenance of the PTACs in their facility and allow management to better control operating costs. One of these features is a "setback" program that senses whether or not a unit has been touched within a specific window of time. If the unit has not been touched, the system then concludes that the room in which the PTAC is located is vacant and begins setting the temperature back in three successive steps, thereby saving energy. The most significant breakthrough in the PTAC industry, is the new DigiSmart Wireless Energy Management Suite that helps ensure that you minimize energy used in cooling your guest rooms when your guests are not in the room. Enhance Room Value, Gain Control and Start Saving 35% on PTAC Energy Costs! There are three key pieces to the DigiSmart Wireless Energy Management Suite: a Wireless Antenna, a Remote-Mounted Thermostat, and a combination Motion Sensor/Door Switch. When installed withan Amana brand PTAC, the system works as follows. (1) Plug in the DigiSmart Antenna. Once a technician plugs this small antenna into the DigiSmart control board, the unit is ready to communicate with the Thermostat and the Motion Sensor/Door Switch. And as you install these amazing DigiSmart antennae in all of the PTACs in your facility, they will form a network and begin to talk to one another. (2) Set and Mount the DigiSmart Remote-Mounted Thermostat. Simply push a button inside the thermostat to link it to the PTAC and mount the thermostat on the wall. (3) Set and Mount the DigiSmart Occupancy Control. A simple push of a button will link this device to the PTAC. Then just mount the DigiSmart Motion Sensor/Door Switch above the door, and the Amana brand's proprietary software routines will begin working with this device to determine whether the room is occupied. While the guest is in the room, the PTAC maintains the selected temperature. When the guest is away, however, the energy management system sets the temperature back based on setback routines that you can determine yourself. The new DigiSmart Wireless Energy Management Suite is an extremely valuable way for you to help control the energy used in your guest rooms, which can dramatically reduce your operating costs over time.

more >>
AJ Madison
$629.00 See It
Search within results
  • Find by Price
    • $ to $