1 to 20 of  100 products for aperture rear sights fits ruger mini30ranch

No exact matches found for aperture rear sights fits ruger mini30ranch

100 similar items found

Ruger 10/22 Gi-Style Aperture Sights - Tsr200 10/22 Sight Set

Replacement sight sets give your 10/22 a longer sight radius for improved accuracy potential, plus the same sight picture as an AR-15/M16 with military-issue sights. Installation requires no gunsmithing, no drilling/tapping, and no permanent alterations to the rifle. Rear sight mounts using the factory-provided holes for a scope base. All-steel front sight assembly has a standard detent-locking M16 post surrounded by protective ears that guard it from damage and misalignment. User may substitute any aftermarket post that replaces the standard A2. TSR100 set’s rear sight is adjustable for windage and features close-range and long-range flip-up apertures similar to the M16A2 sight. Fo Mfg: Tech Sights, Llc. SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90" (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94" (24mm) tall. Sold as front/rear sight sets. Includes mounting screws.

more >>
Brownells
$69.99 See It
Ruger 10/22 Gi-Style Aperture Sights - Tsr100 10/22 Sight Set

Replacement sight sets give your 10/22 a longer sight radius for improved accuracy potential, plus the same sight picture as an AR-15/M16 with military-issue sights. Installation requires no gunsmithing, no drilling/tapping, and no permanent alterations to the rifle. Rear sight mounts using the factory-provided holes for a scope base. All-steel front sight assembly has a standard detent-locking M16 post surrounded by protective ears that guard it from damage and misalignment. User may substitute any aftermarket post that replaces the standard A2. TSR100 set’s rear sight is adjustable for windage and features close-range and long-range flip-up apertures similar to the M16A2 sight. Fo Mfg: Tech Sights, Llc. SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90" (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94" (24mm) tall. Sold as front/rear sight sets. Includes mounting screws.

more >>
Brownells
$59.99 See It
Weaver Backup Base

Ghost-ring aperture is a fast, alternative, open sight that will save your hunt if your scope fails. Perfect for use on in-line muzzleloaders when hunting no-scope areas. Attaches in just seconds, without gunsmithing, to any Weaver-style base. Ruger sight fits Ruger and Talley bases, requires drilling rear base. Fully adjustable for windage and elevation. Includes front Test Post. Mfg: Xs Sight Systems SPECS: Steel, blue, matte finish. .191" (4.8mm) diameter aperture. Weaver: .275" (7mm), High Weaver: .500" (12.7mm) from the top of base to center of aperture. Ruger: .300" (7.6mm) high from top of base to top of sight body.

more >>
Brownells
$58.50 See It
Ruger 10/22 Fire Sights - Wgrs-Ru22 Fire Sights

All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. High visibility, fast to pickup, sight systems for the Ruger® 10/22®. WGRS features low profile, guide receiver, peep sight and red, fiber optic, front sight. 3-Dot has U-notch rear blade with green dots, red front sight. Adjustable for windage and elevation. Mfg: Williams Gun Sight SPECS: Aluminum, black anodized. Front - .530'''' high, 1/16'''' red fiber optic bead. Fits Ruger 10/22 only.

more >>
Brownells
$41.99 See It
Taurus Fire Sight Fiber Optic Sight Sets - Fits Taurus Pt/Pro W/Dovetail Sights, Adjustable

Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the rods glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable. Mfg: Williams Gun Sight

more >>
Brownells
$59.99 See It
Revolver 24/7 Tritium Express Front Sights - Ruger Lcr 24/7 Front Sight

Replacement front sights have a high-visibility white outline surrounding a Tritium insert for easy sight acquisition in all types of ambient light—from bright sunlight to nighttime, and anything in between. Low, streamlined, no-snag shape makes these sights excellent for concealed carry guns. Models available for Smith & Wesson J-Frame and Ruger® LCR®. Mfg: Xs Sight Systems SPECS: Machined steel, matte black finish. S&W J-Frame - .161" (4mm) dia. dot; LCR - .110" (2.8mm) dia. dot. Gunsmith installation recommended.

more >>
Brownells
$54.00 See It
1911 Fiber Optic Rear Sights - Fiber Optic Lo-Mount Rear Sight, Green, Fits Colt 1911

Advanced light gathering properties of fiber optic rods make maximum use of ambient light to provide a bright glow that stands out against dark backgrounds and puts you on target fast, even in low-light or high-stress situations. Fronts and rears sold separately, so you can create a custom, three-dot, fiber optic system tailored to your shooting needs. Available with red or green inserts. Lo-Mount rear sights have radiused edges that won’t snag on holster or clothing. Colt rear sight fits Government model; requires milling, installation instructions included. Mfg: Novak SPECS: Machined steel, matte black finish with fiber optic rods in red or green. Colt – Rear: 1" (2.5cm) long, .72" (1.8cm) wide, .46" (1.17cm) high, with .125" (3.2mm) wide notch. Fits Government model; milling required, instructions included. Kimber - Rear: Green inser

more >>
Brownells
$49.99 See It
Marlin & Winchester Lever Action Fire Sights - Dovetail Fire Sights

All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. For Marlin and Winchester lever action rifles. Dovetail replaces factory front and rear sights. Rear sight is screw adjustable for elevation and drift adjustable for windage; has two, green, fiber optic dots. Front has red, fiber optic rod. FP sight sets have a Foolproof, micro-adjustable, peep Mfg: Williams Gun Sight SPECS: Aluminum, black anodized. Dovetail fits all Winchester and Marlin lever actions with ramped front sights. FP-94/36 fits Win. 94 top eject and models 55, 63, 64, and 65; Marlin 36, 336, 1894, 1895 and 444. Will not fit Win. 94/22. Requires two holes in the left side of the receiver and will

more >>
Brownells
$33.99 See It
Fiber Optic Front Sights - Fiber Optic Front Sight, Red, .175'''' High, Fits Colt 1911

Advanced light gathering properties of fiber optic rods make maximum use of ambient light to provide a bright glow that stands out against dark backgrounds and puts you on target fast, even in low-light or high-stress situations. Fronts and rears sold separately, so you can create a custom, three-dot, fiber optic system tailored to your shooting needs. Available with red or green inserts. Front sight can also be used with Novak’s plain, wide-notch rear. Kimber and Taurus front sights are the same height as factory sights and fit factory dovetails; no machining required. Mfg: Novak SPECS: Machined steel, matte black finish with fiber optic rods in red or green. Colt – Front: Blade is .64" (1.6cm) long, .127" (3.2mm) wide. Fits Government model; milling required, instructions included. Kimber - Front: Red insert. Blade is .650" (16.5mm) long, .125" (3

more >>
Brownells
$41.99 See It
Hd™ Tritium Night Sight Sets For Glock® - Large Frame Hd Yellow Sights For Glock®

The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. The HD Night Sights are designed to shine—even in the most demanding conditions. Green tritium lamps are warranted for 12 years from date of m Mfg: Trijicon Specs: Green tritium lamps are warranted for 12 years from date of manufacture. The CA128O HD Night Sights fit the 1911 Novak Dovetail Cut Models. The fronts are .330” x 65 degree dovetail. The rears (Fixed LoMount Carry) are .495” x 65 degree dovetails

more >>
Brownells
$141.95 See It
Hd™ Tritium Night Sight Sets For Glock® - Hd Night Sights, Orange For Glock®

The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. The HD Night Sights are designed to shine—even in the most demanding conditions. Green tritium lamps are warranted for 12 years from date of m Mfg: Trijicon Specs: Green tritium lamps are warranted for 12 years from date of manufacture. The CA128O HD Night Sights fit the 1911 Novak Dovetail Cut Models. The fronts are .330” x 65 degree dovetail. The rears (Fixed LoMount Carry) are .495” x 65 degree dovetails

more >>
Brownells
$133.45 See It
S&W Overmolded Handgun Front Sights - S&W Front Sight, Green

Replacement front sights work in conjunction with factory rear sights to give you fast sight acquisition in most light conditions. Machined steel body uses overmolded technology to completely cover and protect the light gathering, polymer LightPipe with an extra layer of clear polymer. Gunsmith fitting recommended. Fits most Smith & Wesson models with 2.5 inch or longer barrel and adjustable rear sight. installed sight height is .269 inches. except classic series and Performance Center guns. Fits models with pinned front sight. Mfg: Hiviz SPECS: Steel, black, matte finish. .893" (22.7mm) long.

more >>
Brownells
$34.99 See It
S&W M&P Hd™ Tritium Night Sight Sets - S&W M&P, Sd9/Sd40 Hd Night Sights, Orange

The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. The HD Night Sights are designed to shine—even in the most demanding conditions. Green tritium lamps are warranted for 12 years from date of m Mfg: Trijicon

more >>
Brownells
$157.25 See It
Hd™ Tritium Night Sight Sets For Glock® - Hd Night Sights, Yellow For Glock®

The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. The HD Night Sights are designed to shine—even in the most demanding conditions. Green tritium lamps are warranted for 12 years from date of m Mfg: Trijicon Specs: Green tritium lamps are warranted for 12 years from date of manufacture. The CA128O HD Night Sights fit the 1911 Novak Dovetail Cut Models. The fronts are .330” x 65 degree dovetail. The rears (Fixed LoMount Carry) are .495” x 65 degree dovetails

more >>
Brownells
$133.45 See It
1911 Adjustable Rear Sights - Sti Adjustable Sight

Precision-machined steel rear sights give ideal sight picture for target or carry, with low profile and rounded contours that resist snagging. Flush-mounted, positive-click windage and elevation screws won’t get knocked from your selected settings. Flat blade with anti-glare serrations and wide notch provide a clear, fast sight picture that is easy to acquire under stress. Adjustable sits low on the slide for quick alignment, yet provides a precise sight image. Fits Bo-Mar BMCS slide cut. Tactical Adjustable combines the adjustability of a target sight with the compact, snag-free profile of a fixed tactical sight that fits a standard Novak rear sight slide cut. Beveled and rounded e Mfg: Sti SPECS: Steel, matte black finish. Installation may require milling, drilling, and tapping of slide. Adjustable – Blade: .434” (11mm) high, .762” (19.3mm) wide. Notch: .110” (2.8mm) wide. Fits Bo-Mar BMCS (BM#1) 60° x .359” cut. Tactical Adjustable – Blade:

more >>
Brownells
$66.99 See It
Shotgun Fire Sights - Mossberg Fire Sights

Models for Browning BPS, pre-2003 Remington 870/1100, Mossberg 500 and Winchester 1300 guns equipped with slug or turkey barrels and factory sight bases. Front sight provides a glowing red dot that’s easily seen in all ambient light conditions. Fully adjustable, U-notch rear has two glowing green dots for precise sight alignment. Mfg: Williams Gun Sight SPECS: Machined aluminum, black, anodized. Rear - "U" notch fiber optic. Front - Fluorescent red front bead on sheared-style blade. Includes instructions. Browning fits BPS shotgun with slug barrel; does not fit vent rib barrel. Remington fits Remington shotguns with 3/8" doveta

more >>
Brownells
$27.99 See It
''''creedmoor'''' Rear Tang Sights - Soule Long Range 4'''' Tang Sight

Named after the famous range on Long Island that hosted many long-range rifle competitions in the 1870s and ‘80s, the Creedmoor ladder-type sight is fully adjustable for windage and elevation and works equally well on cartridge rifles and muzzleloaders. Sight is precision machined from steel and attaches to tang with supplied setscrews and folds down when not in use. The Universal model is available in middle-range 2" and long-range 3" heights. The windage adjustment mechanism is on the eyepiece, allowing the eyepiece to dropped close to the base for close-in shots. The Soule model provides maximum adjustability to fit any hunting or target shooting conditions. Elevation is a Mfg: Pedersoli Davide & C. SPECS: Steel, blued. Elongated rear mounting hole allows installation on most rifles. Drilling and tapping of tang may be required. Distance between mounting holes 2.20”-2.29” (5.6-5.8cm). Mounting screws and installation instructions included.

more >>
Brownells
$269.99 See It
Heat Shield W/ Ghost Ring Sight - Deluxe Heat Shield W/Sights, Black

Self-centering rear ghost ring with large, .122" I.D. aperature for lightning quick target acquisition. Formed steel with elongated cooling slots protects your hand from burns. Provides a secure, non-slip, grasping surface, and provides maximum heat dissipation. Front blade with side guards protects the blade and prevents snagging. Each Heatshield should be custom fit. If you do not have the proper tools or do not feel comfortable fitting the heatshield to your firearm, please enlist the services of your local gunsmith. ATI is not responsible for any damage caused by Improper Installation. Fits Most 12, 16, 20 Gauge and .410 pump shotgun barrels. Heatshields should not be used on Mos Mfg: Advanced Technology SPECS: Shield - Steel, black finish. 13” (35cm) long. Sights - Polymer, matte black. Aperature - .122” (3.1mm) ID. Fits most 12/16/20 ga. and .410 pump shotguns.

more >>
Brownells
$27.99 See It
Hd™ Tritium Night Sight Sets For Glock® - Large Frame Hd Orange Sights For Glock®

The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. The HD Night Sights are designed to shine—even in the most demanding conditions. Green tritium lamps are warranted for 12 years from date of m Mfg: Trijicon Specs: Green tritium lamps are warranted for 12 years from date of manufacture. The CA128O HD Night Sights fit the 1911 Novak Dovetail Cut Models. The fronts are .330” x 65 degree dovetail. The rears (Fixed LoMount Carry) are .495” x 65 degree dovetails

more >>
Brownells
$141.95 See It
Ar-15/M16 Battle Sights - Folding Rear Sight, Black

Rugged, flip-up sights provide failsafe backup when your primary optic or red dot sight fails. Deploys easily and locks securely in place under powerful spring pressure and two locking detent balls, so it can’t be accidentally bumped down until you hit the spring-loaded button on the left side of the base to retract it. Positions apertures at the same height as factory sights, simplifying integration of these sights on your rifle. Base clamps securely to any military or commercial Picatinny rail using a standard flathead screwdriver - no knobs or levers to catch on brush, clothing, or other gear. Protective “ears” shield posts and apertures from impact. Rear sights bolt Mfg: Troy Industries, Inc. SPECS: Stainless steel and aluminum, Black (Blk) or Dark Earth (DkE) finish. Rear Sights – All models 1.17" (3cm) long, 1.25" (3.2cm) wide, 1.85" (4.7cm) high extended. 1.8 oz. (52g) wt. HK-Style Front – 1.17" long, 1.25" wide, 1.9" (4.9cm) high extended.

more >>
Brownells
$129.99 See It
Search within results
  • Find by Price
    • $ to $