1 to 20 of  442 products for ar 10

Result for "ar 10"
Ar-10 Barrel Nut Wrench - Armalite Ar10 Barrel Nut Wrench

Heavy-duty wrench provides plenty of leverage for installing and removing barrel nuts when used with a 3/8" or ½" drive breaker bar, socket wrench, or torque wrench. Cut from 3/8" thick steel, with plenty of metal so it won't flex under pressure while transferring the torque evenly to the nut. Models available for ArmaLite AR-10 rifles. Mfg: Precision Reflex, Inc. SPECS: 1018 steel, black oxide finish. AR-10 fits ArmaLite AR-10 only.

more >>
Brownells
$26.00 See It
Ar-10 308/7.62 Magazines - Ar-10 Magazine, 10-Rd

Brand-new, factory-made, Generation II magazines built by ArmaLite feature a spot-welded, heavy gauge steel body that won't distort when fully loaded and a contoured follower designed to ensure exceptionally smooth, reliable feeding. These aren't converted M14 magazines, but mags purpose-built specifically for the AR-10 Type "B" lowers only - the same mags that come with new rifles. Available in 5-, 10-, 15-, 20- and 25-round capacities to fit a wide range of hunting, competition, and law-enforcement applications. Factory marked floorplate. Will only fit Armalite AR10 rifles, no other makes or models. Mfg: Armalite SPECS: Steel, Parkerized, matte black. Fits ArmaLite AR-10 chambered in .308/7.62mm. Will not fit the type "A" AR-10 designed for P-MAG magazines with an "A" serial number prefix.

more >>
Brownells
$34.99 See It
Ar-10 308/7.62 Magazines - Ar-10 Magazine, 15-Rd

Brand-new, factory-made, Generation II magazines built by ArmaLite feature a spot-welded, heavy gauge steel body that won't distort when fully loaded and a contoured follower designed to ensure exceptionally smooth, reliable feeding. These aren't converted M14 magazines, but mags purpose-built specifically for the AR-10 Type "B" lowers only - the same mags that come with new rifles. Available in 5-, 10-, 15-, 20- and 25-round capacities to fit a wide range of hunting, competition, and law-enforcement applications. Factory marked floorplate. Will only fit Armalite AR10 rifles, no other makes or models. Mfg: Armalite SPECS: Steel, Parkerized, matte black. Fits ArmaLite AR-10 chambered in .308/7.62mm. Will not fit the type "A" AR-10 designed for P-MAG magazines with an "A" serial number prefix.

more >>
Brownells
$29.99 See It
Ar-10 308/7.62 Magazines - Ar-10 Magazine, 5-Rd

Brand-new, factory-made, Generation II magazines built by ArmaLite feature a spot-welded, heavy gauge steel body that won't distort when fully loaded and a contoured follower designed to ensure exceptionally smooth, reliable feeding. These aren't converted M14 magazines, but mags purpose-built specifically for the AR-10 Type "B" lowers only - the same mags that come with new rifles. Available in 5-, 10-, 15-, 20- and 25-round capacities to fit a wide range of hunting, competition, and law-enforcement applications. Factory marked floorplate. Will only fit Armalite AR10 rifles, no other makes or models. Mfg: Armalite SPECS: Steel, Parkerized, matte black. Fits ArmaLite AR-10 chambered in .308/7.62mm. Will not fit the type "A" AR-10 designed for P-MAG magazines with an "A" serial number prefix.

more >>
Brownells
$29.99 See It
Sinclair Ar-15/And Ar-10 Lug Recess Tool - Sinclair Ar-15 Lug Recess Tool With Rolls

This one of a kind tool is used to clean the lug recess area on the AR-15 and AR-10 rifles. The lug recess area collects a lot of grease and debris and needs to be cleaned regularly. This tool compresses a cotton roll and then releases it so you can rotate it inside the lug recess area. Should be used wet with solvent, then followed up with a dry roll. One bag of cotton rolls, about 50, is included with each tool. Mfg: Sinclair International

more >>
Brownells
$29.99 See It
Ar-10 308/7.62 Magazines - Ar-10 Magazine, 25-Rd

Brand-new, factory-made, Generation II magazines built by ArmaLite feature a spot-welded, heavy gauge steel body that won't distort when fully loaded and a contoured follower designed to ensure exceptionally smooth, reliable feeding. These aren't converted M14 magazines, but mags purpose-built specifically for the AR-10 Type "B" lowers only - the same mags that come with new rifles. Available in 5-, 10-, 15-, 20- and 25-round capacities to fit a wide range of hunting, competition, and law-enforcement applications. Factory marked floorplate. Will only fit Armalite AR10 rifles, no other makes or models. Mfg: Armalite SPECS: Steel, Parkerized, matte black. Fits ArmaLite AR-10 chambered in .308/7.62mm. Will not fit the type "A" AR-10 designed for P-MAG magazines with an "A" serial number prefix.

more >>
Brownells
$39.99 See It
Ar-10 308/7.62 Magazines - Ar-10 Magazine, 20-Rd

Brand-new, factory-made, Generation II magazines built by ArmaLite feature a spot-welded, heavy gauge steel body that won't distort when fully loaded and a contoured follower designed to ensure exceptionally smooth, reliable feeding. These aren't converted M14 magazines, but mags purpose-built specifically for the AR-10 Type "B" lowers only - the same mags that come with new rifles. Available in 5-, 10-, 15-, 20- and 25-round capacities to fit a wide range of hunting, competition, and law-enforcement applications. Factory marked floorplate. Will only fit Armalite AR10 rifles, no other makes or models. Mfg: Armalite SPECS: Steel, Parkerized, matte black. Fits ArmaLite AR-10 chambered in .308/7.62mm. Will not fit the type "A" AR-10 designed for P-MAG magazines with an "A" serial number prefix.

more >>
Brownells
$34.99 See It
M16 & Ar-15 Chamber Brushes - Ar-10 Chamber Brush

Original military design, M16, with 8-36 thread for direct threading into the ''''Cleaning Rod, Small Arms'''', or AR-15 with 8-32 thread to fit standard rods. AR-10 cleans the larger .308 chamber used on these rifles. Bronze bristles fit chamber, longer, stainless steel tufts clean locking lug recesses. Mfg: Brownells SPECS: M16 - NSN 1005-00-999-1435, has 8-36 military thread. Meets Mil Spec: MIL-B-20100C. AR-15 and AR-10 have 8-32 standard thread. M16 and AR-15 are 37/8'''' (9.8cm) overall. AR-10, 4 3/8'''' (11.2cm).

more >>
Brownells
$5.99 See It
AR-10 Trigger Small Pin 4 lbs Skeleton -11%

The Timney AR-10 trigger is a self-contained, 100% drop-in unit ready to install in an AR-10 rifle for an exceptionally smooth, crisp, single-stage trigger pull. No gunsmithing, fitting, or adjusting required. Pull weight is factory set at 4 pounds.

more >>
Sears
$299.95 $266.72 See It
Ar-10 Rails - Tactical Accessory Rail System, Ar-10 Mid-Length

6061 T6 aluminum construction CNC machined Hard coat anodized finish Mid-length standard height AR 10 receiver Free floating New take down pin design No need to remove front sight base Clamp prevents barrel nut rotation 1913 Mil-Spec rails 4 rails on handguard Venting holes between rails Bottom rail is removable to accommodate the M203 Forms a continuous top rail Rails do not align correctly with the DPMS A3 height 308 upper receiver Your AR 10 rifle deserves the best accessory mounting system you can get, that's the Samson STAR-10 forearm. The STAR-10 fits the mid-length standard height AR 10 rece Mfg: Samson Manufacturing Corp SPECS: 6061 T6 aluminum construction, CNC machined, Hard coat anodized finish, Fits mid-length standard height AR 10 receiver, Free floating, No need to remove the front sight base, clamp prevents barrel nut rotation, 1913 Mil-Spec rails, 4 rails on handguard, Fenting holes between rails, Removab

more >>
Brownells
$359.00 See It
Ar-15 Bullet Button - Lock Ar-15 Bullet-Button

Drop-in replacement for factory magazine release button retains the magazine in the lower receiver to conform with California Code of Regulations 978.20(a). Prevents rapid magazine removal, so your gun can meet the requirement for a permanent, non-detachable magazine. Installs in minutes. Magazine capacity can be no more than 10 rounds. Laws and regulations can change at any time; the user is responsible for making sure his rifle stays compliant. Mfg: Assault Planet SPECS: 7075 T6 aluminum, hardcoat anodized, black. Screws - carbon steel, black. Fits AR-15 and clones, Sig 556, and AR-style .308 rifles including ArmaLite AR-10, Bushmaster, Hess, Iron Cross, and J.D. Machine. Includes mounting hardware and instructions.

more >>
Brownells
$18.99 See It
308 Ar 20rd 308/7.62 Magazine - Ar-Style .308 Magazine

Rugged steel, phosphate-treated magazine stands up to the harsh conditions of combat and competition. Self-lubricating polymer follower and heat-treated, precision-wound spring delivers 20 rounds of ammo reliably and consistently. Steel floorplate easily removes for cleaning. Fits DPMS Panther LR series rifles (.243, .260, .308 cal.), Knight's Armament SR-25, Remington R-25 (.308), and Stoner SR-25. Will not fit Armalite AR10. Mfg: Pro Mag SPECS: Steel, heat treated, black oxide finish, polymer follower, 20-round capacity. 55/8 long. Fits DPMS Panther LR series rifles (.243, .260, .308 cal.), Knight SR-25, Remington R-25 (.308), and Stoner SR-25. Does not fit the ArmaLite AR-10, Rock River Arms, or any rifle using a

more >>
Brownells
$22.99 See It
Ar-15/Car-15/Ar-Style .308 Chrome Silicon Springs - 308ar Cs Buffer Spring

These flat wire, high-quality action/buffer springs from champion shooter David Tubb will perform flawlessly and are duty rated for 500,000 compression cycles at maximum performance. Made to "extra power" specs without the extra material, these springs are surprisingly lightweight, yet exttremely durable. Gives correct timing and resistance on the recoil stroke and a controlled rebound ensures reliable feeding with consistent forward thrust on every shot. Keeps the bolt locked a little longer to allow pressures more time to subside for perfect cycling. Mfg: Superior Shooting SPECS: Chrome silicon steel. AR-15 fits both fixed and collapsible stocked AR-15 rifles and carbines without modification to spring or gun. AR-10 .308-style fits both AR-10 and SR-25/LR-308 platform Rifles and Carbines with either rifle or carbine receiver extensions.

more >>
Brownells
$29.99 See It
Semi-Auto Rifle Front Sight - Ar-15 Duplex Hooded

CNC machined sight post has integral crosshairs to provide quick, consistent sight alignment for improved accuracy at any range. Large diameter aperture offers a wide field of view that does not obscure target; gives a sight picture that's like looking through a scope. Compatible with factory rear sights and variable-diopter target sights. Non-hooded AR-15 sight is .082'''' thick. Hooded sight has .250'''' hood that shields crosshair from reflected light, offers greater crosshair protection for extreme duty use. STD, thin wire crosshair. Duplex, styled after the popular duplex scope reticle, improves low light visibility. AR-15 available as Hooded or non-hooded, fits M-16 and AR-10 rifles with sta Mfg: Kns Precision, Inc. SPECS: Brass, black, matte finish. Beryllium crosshairs, heat treated. STD - .010'''' (.25mm) wire, Duplex .010''''/.020'''' (.5mm) wire. .240'''' (6.1mm) diameter aperture. HK 91 fits 91, 93, 94 MP-5, SP-89. 3/8'''' Dovetail height measured from top of base to center of sight.

more >>
Brownells
$28.99 See It
Ar-Style .308 Gold Trigger Module - Sr Gold .308 Modular Trigger

Self-contained trigger/assembly installs in minutes and delivers a light, smooth, match-grade trigger pull free of grittiness, with an ultra-crisp letoff and short reset. Simply remove factory trigger and safety selector, drop in the module, reinstall selector and pins, and you're ready to shoot. Completely new engagement geometry produces a light 3-lb. pull and crisp release without compromising reliability or safety. The two-stage design is adjustable for sear engagement, with a first-stage takeup of approximately 6 ounces, followed by actual sear movement taking up the rest of the weight-the reverse of the military two-stage AR trigger pull profile. Instead, the shooter can bu Mfg: Pact SPECS: Trigger/Hammer Wire EDM cut S7 tool steel. Housing Aluminum, anodized, black. SR Gold fits ArmaLite AR-10, DPMS LR-308, Knight's Armament SR-25, and similar AR-style .308 rifles with .154" trigger and hammer pin holes.

more >>
Brownells
$279.99 See It
Ar-15/Ar Style 308 Cleaning Rod Guide - 308ar

Replaces the bolt carrier, seals the upper receiver and provides safe and effective cleaning from the breech instead of the muzzle. Solid aluminum rod guide helps prevent throat and chamber damage plus, the rubber ''''O'''' rings keep bore cleaning solvents out of the lower receiver. Mfg: J P Enterprises SPECS: Machined aluminum, AR-15 - red, anodized finish. 10'''' (25cm) long. Fits .223 only. AR-10 - blue, anodized finish. 11.5'''' (29.2cm) long. Fits .308 only.

more >>
Brownells
$37.99 See It
Magazine, 19-Round, Panther Lr - Magazine, 10-Round, Panther Lr

Tough, durable, magazine is constructed of heat-treated 1050 steel with a manganese phosphate finish to fit and function properly and stand up to harsh conditions. Steel floorplate removes for cleaning; steel spring and plastic follower give you reliable, smooth feeding of every round. Fits DPMS Panther LR series rifles (.243, .260, .308 cal.), Knight SR-25, Remington R-25 (.308), and Stoner SR-25. Mfg: Dpms SPECS: 1050 steel, manganese-phosphate finish, black. Will not fit ArmaLite AR-10.

more >>
Brownells
$27.99 See It
Delta Series AR Hi Rise/Picatinny Rail Vise Block -9%

This innovative AR vise block is designed to securely hold basically any AR upper receiver. It will secure AR-15 uppers by engaging the takedown lugs on the bottom of the receiver. By reversing the direction it will secure most AR-10 style uppers in

more >>
Sears
$48.99 $44.49 See It
Sinclair Ar-10 Link

This item is a must have for cleaning your AR-10. The Link separates the upper and lower assemblies, but holds them securely to allow easy breech access for bore cleaning using a Sinclair Rod Guide. Made of Delrin and stainless steel, it is virtually impervious to solvents. The Cleaning Link uses the rear locking pin and rear locking pin hole and installs in seconds. Mfg: Sinclair International SPECS: Will require fitting for most takedown pins other than the Armalite AR-10. Will not work on POF .308 rifles with .250 diameter pins, use the AR-15 model 749-002-497.

more >>
Sinclair Intl
$19.99 See It
Ar-15/M16 Flash Suppressor Die - 1/2-28 Carbon Steel Hex Die

A must when threading custom barrels or chasing threads on standard barrels. Use to make custom supressors or clean up existing factory threads. Custom-made to factory specs. Mfg: Brownells SPECS: High-speed steel. AR-15/M16 - .500"-28 thread, 1.5" dia. body. AR-10 - 5/8"-24 thread.

more >>
Brownells
$29.99 See It
Search within results