1 to 9 of  9 products for ar 15 bore guide delrin bore guide

Result for "ar 15 bore guide delrin bore guide"
Sinclair Ar-15 Rod Guide And Link Kit - Sinclair Ar-15 Rod Guide, 223 Rem

This item is a must have for cleaning your AR-15. The Link separates the upper and lower assemblies, but holds them securely to allow easy breech access for bore cleaning using a Sinclair Rod Guide. Made of Delrin and stainless steel, it is virtually impervious to solvents. The Cleaning Link uses the rear locking pin and rear locking pin hole and installs in seconds. Mfg: Sinclair International

more >>
Brownells
$19.99 See It
Sinclair Ar-15 Rod Guide And Link Kit - Sinclair Ar-15 Cleaning Link

This item is a must have for cleaning your AR-15. The Link separates the upper and lower assemblies, but holds them securely to allow easy breech access for bore cleaning using a Sinclair Rod Guide. Made of Delrin and stainless steel, it is virtually impervious to solvents. The Cleaning Link uses the rear locking pin and rear locking pin hole and installs in seconds. Mfg: Sinclair International

more >>
Brownells
$14.99 See It
Sinclair Ar-15 Rod Guide And Link Kit

This item is a must have for cleaning your AR-15. The Link separates the upper and lower assemblies, but holds them securely to allow easy breech access for bore cleaning using a Sinclair Rod Guide. Made of Delrin and stainless steel, it is virtually impervious to solvents. The Cleaning Link uses the rear locking pin and rear locking pin hole and installs in seconds. Mfg: Sinclair International

more >>
Brownells
$29.99 See It
Ar-15 Bore Guide - .223/5.56 Bore Guide

Clean your AR-15 from the breech to prevent muzzle or chamber damage. Insert into the upper receiver, replacing the bolt carrier, for safe and easy cleaning. Self-centers in the receiver. O-ring seal at breech and solvent port keeps chemicals out of the action. Mfg: Satern SPECS: Machined Delrin®. 9½" (24cm) long. Models for AR-15s chambered in .223/5.56mm NATO or 6.5mm Grendel.

more >>
Brownells
$34.99 See It
Bore Guides - Bore Guide For Ar15/M16 Style Rifle .223 Cal/5.56mm

#BG22-30 -.22 Centerfire-.30 Cal short or long actions #BG5 - Long action bore guide .17 Cal. #BGAR15 - The AR style bore guide slides in place of the bolt carrier group assembly while cleaning. This centers the cleaning rod while preventing solvent from entering the upper receiver and trigger mechanism. The AR15/M16 style bore guide can be used for all of the AR15/M16/M4 family of rifles. It will work for both the 5.56mm and .223 caliber variants. Pro-Shot’s bore guides are manufactured using Delrin, Delrin is a chemical resistant and will stand up to harsh chemicals, providing continual use. #BGAR10- The AR10 style bore guide can be used for both the 7.62mm and .308 ca Mfg: Pro Shot Products, Inc

more >>
Brownells
$22.99 See It
Bore Guides - Bore Guide For Ar15/M16 Style Rifle .223 Cal/5.56mm

#BG22-30 -.22 Centerfire-.30 Cal short or long actions #BG5 - Long action bore guide .17 Cal. #BGAR15 - The AR style bore guide slides in place of the bolt carrier group assembly while cleaning. This centers the cleaning rod while preventing solvent from entering the upper receiver and trigger mechanism. The AR15/M16 style bore guide can be used for all of the AR15/M16/M4 family of rifles. It will work for both the 5.56mm and .223 caliber variants. Pro-Shot’s bore guides are manufactured using Delrin, Delrin is a chemical resistant and will stand up to harsh chemicals, providing continual use. #BGAR10- The AR10 style bore guide can be used for both the 7.62mm and .308 ca Mfg: Pro Shot Products, Inc

more >>
Brownells
$22.99 See It
Bore Guides - .22 Centerfire To 30 Cal Adjustable Bore Guide

#BG22-30 -.22 Centerfire-.30 Cal short or long actions #BG5 - Long action bore guide .17 Cal. #BGAR15 - The AR style bore guide slides in place of the bolt carrier group assembly while cleaning. This centers the cleaning rod while preventing solvent from entering the upper receiver and trigger mechanism. The AR15/M16 style bore guide can be used for all of the AR15/M16/M4 family of rifles. It will work for both the 5.56mm and .223 caliber variants. Pro-Shot’s bore guides are manufactured using Delrin, Delrin is a chemical resistant and will stand up to harsh chemicals, providing continual use. #BGAR10- The AR10 style bore guide can be used for both the 7.62mm and .308 ca Mfg: Pro Shot Products, Inc

more >>
Brownells
$28.99 See It
Bore Guides - .22 Centerfire To 30 Cal Adjustable Bore Guide

#BG22-30 -.22 Centerfire-.30 Cal short or long actions #BG5 - Long action bore guide .17 Cal. #BGAR15 - The AR style bore guide slides in place of the bolt carrier group assembly while cleaning. This centers the cleaning rod while preventing solvent from entering the upper receiver and trigger mechanism. The AR15/M16 style bore guide can be used for all of the AR15/M16/M4 family of rifles. It will work for both the 5.56mm and .223 caliber variants. Pro-Shot’s bore guides are manufactured using Delrin, Delrin is a chemical resistant and will stand up to harsh chemicals, providing continual use. #BGAR10- The AR10 style bore guide can be used for both the 7.62mm and .308 ca Mfg: Pro Shot Products, Inc

more >>
Brownells
$28.99 See It
Sinclair Ar-10 Link

This item is a must have for cleaning your AR-10. The Link separates the upper and lower assemblies, but holds them securely to allow easy breech access for bore cleaning using a Sinclair Rod Guide. Made of Delrin and stainless steel, it is virtually impervious to solvents. The Cleaning Link uses the rear locking pin and rear locking pin hole and installs in seconds. Mfg: Sinclair International SPECS: Will require fitting for most takedown pins other than the Armalite AR-10. Will not work on POF .308 rifles with .250 diameter pins, use the AR-15 model 749-002-497.

more >>
Sinclair Intl
$19.99 See It
Additional items that match your search
Ar-15/M16 Buttstock Cleaning Kit - Standard Buttstock Cleaning Kit

Our crew of tactical weapons experts developed these fine 5.56mm cleaning kits to give the M16/AR-15 shooter a handy, carry-along system that fits snug in the storage compartment of A-1/A-2 buttstocks. Standard Kit includes a government-type 5-piece cleaning rod (with loop), bronze bore brush, bronze chamber brush, double-ended parts cleaning brush, and a heavy Nylon pouch tapered correctly for a rattle-free fit. Deluxe Kit adds a solvent-resistant Nylon chamber brush, and 25-Pak of mil-spec cleaning patches. Detailed instructions in both kits guide you through the cleaning process. Mfg: Brownells SPECS: For 5.56mm (.223) caliber only. Fits A-1 and A-2 style buttstocks. Kit includes 5-piece cleaning rod, bore brush, bronze chamber brush, parts cleaning brush, buttstock pouch, and instructions. Deluxe Kit adds Nylon chamber brush, and 25-Pak cleaning patches.

more >>
Brownells
$16.99 See It
Ar-15/Ar Style 308 Cleaning Rod Guide - 308ar

Replaces the bolt carrier, seals the upper receiver and provides safe and effective cleaning from the breech instead of the muzzle. Solid aluminum rod guide helps prevent throat and chamber damage plus, the rubber ''''O'''' rings keep bore cleaning solvents out of the lower receiver. Mfg: J P Enterprises SPECS: Machined aluminum, AR-15 - red, anodized finish. 10'''' (25cm) long. Fits .223 only. AR-10 - blue, anodized finish. 11.5'''' (29.2cm) long. Fits .308 only.

more >>
Brownells
$37.99 See It
Ar-15/Ar Style 308 Cleaning Rod Guide - Ar-15

Replaces the bolt carrier, seals the upper receiver and provides safe and effective cleaning from the breech instead of the muzzle. Solid aluminum rod guide helps prevent throat and chamber damage plus, the rubber ''''O'''' rings keep bore cleaning solvents out of the lower receiver. Mfg: J P Enterprises SPECS: Machined aluminum, AR-15 - red, anodized finish. 10'''' (25cm) long. Fits .223 only. AR-10 - blue, anodized finish. 11.5'''' (29.2cm) long. Fits .308 only.

more >>
Brownells
$34.99 See It
Ar-15/M16 M4 Upper Receiver

Complete upper fully assembled and ready to install on an AR-15/M16/M4 lower receiver Every component is carefully manufactured, finished, and tested to meet or exceed current military specifications to produces a reliable, smooth-functioning rifle M4-profile, 16" barrel is chambered for military 5.56 NATO ammo; cutout for grenade/tear gas/bean bag launcher Hard-chromed chamber and bore to resist corrosion Barrel is high-pressure tested and magnetic particle inspected to ensure strength and durability Extended M4 feed ramps for reliable feeding during rapid fire Receiver top and carrier are discretely laser-etched with Spike’s Tactic Mfg: Spikes Tactical SPECS: Receiver - 7075 T6 aluminum, hardcoat anodized, black. MIL-B-11595E chrome-moly-vanadium barrel, chrome lined, phosphate coated, black. Bolt/Carrier - 8620 steel, Parkerized, matte black. 1-7" twist. Chambered for 5.56mm NATO. Fits mil-spec lower receivers with .250" pivot/takedo

more >>
Brownells
$580.00 See It
Ar-15/M16 5.56 Carbine Barrels - Chrome Lined 11-1/2'''' A1 Barrel

Ready-to-install barrels let you customize your AR-15/M16/M4/CAR-15 or replace a “shot-out” factory barrel with one that preserves your gun’s original specs and appearance. Machined from 4140 steel, with a dark gray, military-type Parkerized finish. Button-cut, six groove rifling with 1:9 right-hand twist provides superb accuracy with most bullet weights. Barrel extension has M4-type feed ramps to help ensure smooth feeding and prevent jams. Barrel nut and handguard retainer cap included. Forged front sight housing has integral bayonet lug, and muzzle is threaded to accept the flash hider or compensator of your choice. Choose from Chrome Lined for maximum bore life or St Mfg: Double Star SPECS: 4140 steel, dark gray Parkerized finish. A1 - .675" (1.71cm) OD under handguard, .625" (1.59cm) at front sight housing, ½"-28 tpi threaded muzzle with .600" (1.52cm) dia. shoulder behind threads. HBAR - .870" ( 2.21cm) OD under handguard, .750" (1.91cm)

more >>
Brownells
$269.99 See It
Ar-15/M16/Ar-Style .308 Cleaning Rod Guide - Rod Guide, Ar-15/M16 .223/5.56

The combination of limited chamber space and the large tube inside diameter needed for brush clearance eliminates the possibility of any type of chamber sealing o-ring. We have incorporated a front brass bushing, which centers the guide in the barrel extension and butts up against the chamber opening. The large o-ring on the back end locks into the bolt opening at the rear of the receiver to reduce longitudinal movement of the guide during the cleaning process. Made from Delrin, Brass, and Anodized Aluminum For use with any J. Dewey Cleaning Rods Mfg: Dewey SPECS: Aluminum, anodized. Delrin handle. Rubber O-rings. Approximately 9” (22.9cm) long. Includes spare O-rings and O-ring installation tool. AR-15/M16 model fits rifles chambered in .223/5.56mm and .204 Ruger.

more >>
Brownells
$23.99 See It
Ar-15/M16/Ar-Style .308 Cleaning Rod Guide - Rod Guide, Ar-Style .308

The combination of limited chamber space and the large tube inside diameter needed for brush clearance eliminates the possibility of any type of chamber sealing o-ring. We have incorporated a front brass bushing, which centers the guide in the barrel extension and butts up against the chamber opening. The large o-ring on the back end locks into the bolt opening at the rear of the receiver to reduce longitudinal movement of the guide during the cleaning process. Made from Delrin, Brass, and Anodized Aluminum For use with any J. Dewey Cleaning Rods Mfg: Dewey SPECS: Aluminum, anodized. Delrin handle. Rubber O-rings. Approximately 9” (22.9cm) long. Includes spare O-rings and O-ring installation tool. AR-15/M16 model fits rifles chambered in .223/5.56mm and .204 Ruger.

more >>
Brownells
$27.99 See It
Ar-15/M16 5.56 Carbine Barrels - Chrome Lined 16'''' Hbar Barrel

Ready-to-install barrels let you customize your AR-15/M16/M4/CAR-15 or replace a “shot-out” factory barrel with one that preserves your gun’s original specs and appearance. Machined from 4140 steel, with a dark gray, military-type Parkerized finish. Button-cut, six groove rifling with 1:9 right-hand twist provides superb accuracy with most bullet weights. Barrel extension has M4-type feed ramps to help ensure smooth feeding and prevent jams. Barrel nut and handguard retainer cap included. Forged front sight housing has integral bayonet lug, and muzzle is threaded to accept the flash hider or compensator of your choice. Choose from Chrome Lined for maximum bore life or St Mfg: Double Star SPECS: 4140 steel, dark gray Parkerized finish. A1 - .675" (1.71cm) OD under handguard, .625" (1.59cm) at front sight housing, ½"-28 tpi threaded muzzle with .600" (1.52cm) dia. shoulder behind threads. HBAR - .870" ( 2.21cm) OD under handguard, .750" (1.91cm)

more >>
Brownells
$269.99 See It
Ar-15 Stripped Lower Receiver -28%

Stripped, small pin, semi-auto lower receiver is precision machined from a durable, 7075 T6 aluminum forging. Stamped “Cal Multi,” this versatile mil-spec receiver can be the foundation for rifle builds on 5.56/.223, 6.5mm, 6.8mm, 300 AAC Blackout, 9mm Luger, or other chamberings that fit the standard AR-15 receiver. Holes, inletting and pin locations have been cut to final dimensions and accept standard AR-15 magazines and components. Clearly stamped safe/fire switch position indicators ensure that you can easily identify the service state of the rifle. Cerakote Desert – Same specifications as the anodized lower receiver, but with a desert tan Cerakote finish. Mfg: Aero Precision SPECS: 7075 T6 aluminum, hardcoat anodized, matte black. Small pin, .154” (3.9mm) hammer/pin holes. .250” (6.3mm) pivot/takedown pin holes. FFL required for purchase.

more >>
Brownells
$89.99 $64.99 See It
Ar-15/M16 5.56 Carbine Barrels - Chrome Lined 11-1/2'''' Hbar Barrel

Ready-to-install barrels let you customize your AR-15/M16/M4/CAR-15 or replace a “shot-out” factory barrel with one that preserves your gun’s original specs and appearance. Machined from 4140 steel, with a dark gray, military-type Parkerized finish. Button-cut, six groove rifling with 1:9 right-hand twist provides superb accuracy with most bullet weights. Barrel extension has M4-type feed ramps to help ensure smooth feeding and prevent jams. Barrel nut and handguard retainer cap included. Forged front sight housing has integral bayonet lug, and muzzle is threaded to accept the flash hider or compensator of your choice. Choose from Chrome Lined for maximum bore life or St Mfg: Double Star SPECS: 4140 steel, dark gray Parkerized finish. A1 - .675" (1.71cm) OD under handguard, .625" (1.59cm) at front sight housing, ½"-28 tpi threaded muzzle with .600" (1.52cm) dia. shoulder behind threads. HBAR - .870" ( 2.21cm) OD under handguard, .750" (1.91cm)

more >>
Brownells
$269.99 See It
Ar-15/M16 5.56 Barrels - Ar-15/M16 11.5'''' 5.56 M4 Barrel Chrome Lined 1/2-28

DPMS AR15/M16 5.56x45mm Barrel Assemblies are ready for your next build. These barrels are machined from 4140 chrome moly steel, and feature a matte black phosphate finish. Barrels include front sight base installed (does not include front sight parts and sling swivel). Barrels are available in 11.5”, 14.5”, 16” and 20” lengths. Shorter barrels feature a carbine length gas system, while the 20” barrel features a rifle length gas system. Muzzle are threaded ½-28 and bore and select barrels are available with chrome bores.Barrels feature M4 feedramps. Includes barrel nut and handguard cap (231-000-361 does not include barrel nut or handguard cap). Mfg: Dpms SPECS: Muzzle diameter is .720 to threaded portion.

more >>
Brownells
$179.99 See It
Search within results