1 to 3 of  3 products for ar 15 m16 bcm gunfighter charging handle large latch gunfighter charging handle

Result for "ar 15 m16 bcm gunfighter charging handle large latch gunfighter charging handle"
Ar-15/M16 Bcm Gunfighter Charging Handle - Ar-15/M16 Bcm Charging Handle, Large

Heavy-duty charging handle has an innovative, oversized latch that distributes pull force evenly across the entire handle for fast, smooth, reliable operation with the support hand. Prevents the critical roll pin from breaking and rendering the latch inoperable. Machined from billet aluminum with extra metal reinforcing the stress points to stand up to hard operational use. Available with Medium length extended latch or Large latch that's ¼" longer for an even bigger, "can't miss" grasping surface. Small latch duplicates the size of the issue latch but includes the same design upgrades as the Medium and Large latches for increased strength and dependabi Mfg: Bravo Company SPECS: 7075 T6 aluminum, mil-spec Type III hardcoat anodized, matte black finish. 67/8" (17.5cm) long. Models available to fit mil-spec AR-15/M16 upper receivers.

more >>
Brownells
$47.99 See It
Ar-15/M16 Bcm Gunfighter Charging Handle - Ar-15/M16 Bcm Charging Handle, Small

Heavy-duty charging handle has an innovative, oversized latch that distributes pull force evenly across the entire handle for fast, smooth, reliable operation with the support hand. Prevents the critical roll pin from breaking and rendering the latch inoperable. Machined from billet aluminum with extra metal reinforcing the stress points to stand up to hard operational use. Available with Medium length extended latch or Large latch that's ¼" longer for an even bigger, "can't miss" grasping surface. Small latch duplicates the size of the issue latch but includes the same design upgrades as the Medium and Large latches for increased strength and dependabi Mfg: Bravo Company SPECS: 7075 T6 aluminum, mil-spec Type III hardcoat anodized, matte black finish. 67/8" (17.5cm) long. Models available to fit mil-spec AR-15/M16 upper receivers.

more >>
Brownells
$47.99 See It
Ar-15/M16 Bcm Gunfighter Charging Handle - Ar-15/M16 Bcm Charging Handle, Medium

Heavy-duty charging handle has an innovative, oversized latch that distributes pull force evenly across the entire handle for fast, smooth, reliable operation with the support hand. Prevents the critical roll pin from breaking and rendering the latch inoperable. Machined from billet aluminum with extra metal reinforcing the stress points to stand up to hard operational use. Available with Medium length extended latch or Large latch that's ¼" longer for an even bigger, "can't miss" grasping surface. Small latch duplicates the size of the issue latch but includes the same design upgrades as the Medium and Large latches for increased strength and dependabi Mfg: Bravo Company SPECS: 7075 T6 aluminum, mil-spec Type III hardcoat anodized, matte black finish. 67/8" (17.5cm) long. Models available to fit mil-spec AR-15/M16 upper receivers.

more >>
Brownells
$47.99 See It
Additional items that match your search
Ar-15/M16 Ambidextrous Bcm Gunfighter Charging Handle - Ambidextrous Charging Handle Mod A44

Heavy-duty charging handle has an innovative, oversized latch that distributes pull force evenly across the entire handle for fast, smooth, reliable operation with the support hand. Prevents the critical roll pin from breaking and rendering the latch inoperable. Machined from billet aluminum with extra metal reinforcing the stress points to stand up to hard operational use. Ambidextrous Charging Handle features a latch on both the left and right hand sides. Mfg: Bravo Company SPECS: 7075 T6 aluminum, mil-spec Type III hardcoat anodized, matte black finish. 67/8" (17.5cm) long. Models available to fit mil-spec AR-15/M16 or most AR-style .308 upper receivers.

more >>
Brownells
$71.99 See It
308 Ar Bcm Gunfighter Charging Handles - Ar-308 Bcm Charging Handle, Large

Heavy-duty charging handle has an innovative, oversized latch that distributes pull force evenly across the entire handle for fast, smooth, reliable operation with the support hand. Prevents the critical roll pin from breaking and rendering the latch inoperable. Machined from billet aluminum with extra metal reinforcing the stress points to stand up to hard operational use. Available with Medium length extended latch or Large latch that's ¼" longer for an even bigger, "can't miss" grasping surface. Mfg: Bravo Company SPECS: 7075 T6 aluminum, mil-spec Type III hardcoat anodized, matte black finish. 67/8" (17.5cm) long. Models available to fit most AR-style .308 upper receivers. .308 fits DPMS LR-308, Knight's Armament SR-25/MK11/M110, LaRue OSR, Noveske 308, and Patriot Ordnance Factory P-308;

more >>
Brownells
$57.99 See It
Ar-15 Upper Receiver Assemblies - Ar-15 7'''' Upper Receiver Assembly -3%

AR-15 Upper Receivers ready to install on SBR or Pistol lower receivers. Available with 14.5, 11.5 or 7 inch barrels, featuring a 1-9 twist and 5.56mm chambers. Barrels feature a pinned front sight base. Other features includes flat top upper receiver, bolt carrier group, charging handle and A2 flash hider. 11.5" model available with AAC 51T Blackout Flash Hider. 14.5" & 11.5" models include a two peice carbine handguard. 7" model features a 4" free float tube. All NFA rules apply. Mfg: Dpms SPECS: Fit standard AR-15/M16 lower receivers. Only for use on SBR or Pistol lower receivers.

more >>
Brownells
$569.99 $550.99 See It
Ar-15/M16 Left-Hand Charging Handle - Left-Hand Charging Handle

Machined aluminum charging handle has an extended latch on the right side to enable fast, positive operation by left-handers. Gives both left- and right-handed shooters a tactical advantage in combat or competition to clear jams quickly, and operate the handle even if one hand becomes incapacitated. Extended right-side latch is machined from ordnance-grade steel and features a large, 5/8" square contact pad that projects ¾" from the handle. It's easy to find under stress and provides extra leverage to release the latch and cycle the handle quickly. Also useful on a rifle with a large scope that limits access to the standard charging handle. Mfg: Badger Ordnance SPECS: Aluminum, hardcoat anodized, matte black finish. Extended Latch - Steel, black oxide finish. Fits mil-spec AR-15/M16/M4 and clones.

more >>
Brownells
$99.99 See It
Ar-15/M16 30rd 223/5.56 Magazine 3 Pack With Magpuls - 5.56 Nato Magpul, 3-Pak W/ 3 30-Round Cs Magazines

Thermoplastic loop installed on the base of a rifle or subgun magazine to provide an easy-to-grasp handle for unsurpassed speed and controllability during high stress, tactical magazine changes. Also included are three grey AR-15/M-16 30 Round Brownells Magazines. The most up-to-date & reliable civilian magazine available. Mfg: Brownells SPECS: Magpul - Industrial thermoplastic, black. Impervious to most chemical compounds. Pak of 3. 5.56 NATO fits 20- and 30-round AR-15/M16. Magazine - Aluminum body, MIL-STD hard-anodized, dry-lube coating. Chrome silicon spring. MIL-STD plastic follower.

more >>
Brownells
$39.99 See It
Ar-15/M16 Upper Receivers - Ar15/M16 16'''' Rxa15 Ss M4 Mod Upper Receiver

Upper assemblies readily fit onto standard AR-15 lowers and feature 416R stainless steel barrels that resist weather and corrosion. Chambered in 5.56, barrels feature extensions with M4 feedramps to enhance reliable operation. Uppers are flattop with white T-marks and include fully-installed forward assist and dust cover. 7½" and M4 uppers have modular handguards compatible with Magpul rail segments and have stainless steel A2 flashhiders. All models except for the 7½" have railed gas blocks to accept clamp-on front sights or other accessories. Bull Barrel models have round handguards and target crown muzzles to enhance accuracy potential. Charging handle, bolt, an Mfg: Red X Arms SPECS: Machined 7075 T6 aluminum, hardcoat anodized, matte black finish. Barrels 416R stainless steel. 1-9" twist. 20" and 24" bull barrels 1-8" twist.

more >>
Brownells
$330.00 See It
Ar-15/M16 Raptor Charging Handle - Raptor Ar15/M16 Charging Handle

Drop-in replacement for factory issue handle lets you charge the rifle from either side of the receiver with a rapid palm "blading" motion or the traditional finger/thumb hold. Dual, over-sized release levers are mirror images of each other, with deeply grooved surfaces that ensure positive contact so you can operate the handle in one fluid, fast motion with wet or gloved hands. Radiused edges won't cut the hand or snag on clothing and gear. Gives top of rifle a unique, aggressive appearance, too. Mfg: Axts Weapons SPECS: Machined 7075 T6 aluminum, hardcoat anodized, matte black. 4 oz. wt. AR-15 fits AR-15/M16 rifles with mil-spec upper receiver. May not fit some SIG 516 model rifles.

more >>
Brownells
$89.99 See It
Ar-15/M16 Upper Receivers - Ar15/M16 16'''' Rxa15 Bull Upper Receiver

Upper assemblies readily fit onto standard AR-15 lowers and feature 416R stainless steel barrels that resist weather and corrosion. Chambered in 5.56, barrels feature extensions with M4 feedramps to enhance reliable operation. Uppers are flattop with white T-marks and include fully-installed forward assist and dust cover. 7½" and M4 uppers have modular handguards compatible with Magpul rail segments and have stainless steel A2 flashhiders. All models except for the 7½" have railed gas blocks to accept clamp-on front sights or other accessories. Bull Barrel models have round handguards and target crown muzzles to enhance accuracy potential. Charging handle, bolt, an Mfg: Red X Arms SPECS: Machined 7075 T6 aluminum, hardcoat anodized, matte black finish. Barrels 416R stainless steel. 1-9" twist. 20" and 24" bull barrels 1-8" twist.

more >>
Brownells
$330.00 See It
Ar-15/M16 Ambidextrous Charging Handle - Ambi Charging Handle Assembly

Machined aluminum charging handle drops in to standard AR-15 receivers to give positive operation for right and left handed shooters. Built with thicker dimensions than standard charging handles to withstand wear and rough use. Large diameter coiled spring pin absorbs shock and flexes so it won't fail under extreme conditions. Broad contact points make traditional and tactical weapon manipulation easy, and grooved surfaces help weapon retention and assist positive charging operation while wearing gloves. Battle Latch Charging Handle Assembly fits AR-15s and is designed for right handed shooters. Ambidextrous Battle Latch Charging Handle fits AR-15s and gives true ambidextrous functi Mfg: Phase 5 Tactical SPECS: 6061-T6 aluminum, Mil-spec type III hardcoat anodized, matte black finish.

more >>
Brownells
$79.94 See It
Ar-15 Upper Receiver Assemblies - Ar-15 Carbine Complete Upper Receiver Assemblies

AR-15 Upper Receivers ready to install on SBR or Pistol lower receivers. Available with 14.5, 11.5 or 7 inch barrels, featuring a 1-9 twist and 5.56mm chambers. Barrels feature a pinned front sight base. Other features includes flat top upper receiver, bolt carrier group, charging handle and A2 flash hider. 11.5" model available with AAC 51T Blackout Flash Hider. 14.5" & 11.5" models include a two peice carbine handguard. 7" model features a 4" free float tube. All NFA rules apply. Mfg: Dpms SPECS: Fit standard AR-15/M16 lower receivers. Only for use on SBR or Pistol lower receivers.

more >>
Brownells
$549.99 See It
Ar-15/M16 5.56 Prs Precision Rifle Sniper Adjustable Stock - Ar-15/M16 Prs Stock, Black

Fully adjustable stock and comb for AR-15/M16 rifles readily adapts length of pull and comb height with two click-detent adjustment wheels. Drop-in installation on rifles with standard A1/A2 fixed buffer tubes without A2 spacer. Rubber buttpad seats securely onto your shoulder and won't slip during sustained shooting exercises. Fully-raised comb will not get in the way of charging handle operation. Removable base cover conceals an accessory rail to provide a mounting platform for a monopod. Removable sling loops can be mounted on either side of stock to accommodate your preferred carry position. Get the PRS Stock QD Sling Adapter to use with your PRS stock. Mfg: Magpul SPECS: Molded polymer, Black, Dark Earth or O.D. Green. AR-15/M16 model also available in Dark Earth and O.D. Green. L.O.P. adjusts from 13-1/4" (33.6cm) to 14-1/2" (36.8cm). Comb height can be raised 1" (2.5cm). 1 lb. 12 oz. (.79kg) wt.

more >>
Brownells
$242.25 See It
Ar-15 Upper Receiver Assemblies - Ar-15 11.5'''' Upper Receiver Assembly W/ 51t Aac Flashhider -14%

AR-15 Upper Receivers ready to install on SBR or Pistol lower receivers. Available with 14.5, 11.5 or 7 inch barrels, featuring a 1-9 twist and 5.56mm chambers. Barrels feature a pinned front sight base. Other features includes flat top upper receiver, bolt carrier group, charging handle and A2 flash hider. 11.5" model available with AAC 51T Blackout Flash Hider. 14.5" & 11.5" models include a two peice carbine handguard. 7" model features a 4" free float tube. All NFA rules apply. Mfg: Dpms SPECS: Fit standard AR-15/M16 lower receivers. Only for use on SBR or Pistol lower receivers.

more >>
Brownells
$599.99 $514.95 See It
Ar-15/M16 300 Blackout Upper Receiver - Ar-15/M16 300 Blackout Complete Upper Receiver

Complete 300 Blackout upper receiver drops in to standard AR-15 lowers to give reduced overall length without requiring extra paperwork for a short-barreled rifle. Upper has 11" barrel with a permanently-attached shroud that extends to just over 16". Sound suppressors can fit down into the shroud, allowing user to attach suppressor without adding significant length. Upper includes fake suppressor, along with complete bolt and carrier group, charging handle, dust cover and forward assist. Features two-piece free float rail for optics and accessories. Mfg: Tactical Solutions, Llc SPECS: Complete upper, hardcoat anodized, matte black finish. Barrel 11" (28cm) long. Shroud 5.1" (13cm) long. Accepts suppressors with maximum O.D. 1-3/4" (4.4cm) and minimum length 6-1/2" (16.5cm), that fit onto 5/8-24 threads. All NFA rules apply.

more >>
Brownells
$1,149.99 See It
308 Ar Bcm Gunfighter Charging Handles - Ar-308 Bcm Charging Handle, Medium

Heavy-duty charging handle has an innovative, oversized latch that distributes pull force evenly across the entire handle for fast, smooth, reliable operation with the support hand. Prevents the critical roll pin from breaking and rendering the latch inoperable. Machined from billet aluminum with extra metal reinforcing the stress points to stand up to hard operational use. Available with Medium length extended latch or Large latch that's ¼" longer for an even bigger, "can't miss" grasping surface. Mfg: Bravo Company SPECS: 7075 T6 aluminum, mil-spec Type III hardcoat anodized, matte black finish. 67/8" (17.5cm) long. Models available to fit most AR-style .308 upper receivers. .308 fits DPMS LR-308, Knight's Armament SR-25/MK11/M110, LaRue OSR, Noveske 308, and Patriot Ordnance Factory P-308;

more >>
Brownells
$57.99 See It
Ar-15/M16 Gas Buster Charging Handle - Gas Buster Charging Handle W/ Big Military Latch

Extra-thick handle includes a gas deflection groove to protect shooter from gas blowback. Extended finger latches aid in fast jam clearing. Flat Latch has a deep hook contour. Military (Mil.) Latch has smooth face with round edges that are easy on fingers. Mfg: Precision Reflex, Inc. SPECS: Aluminum, hardcoat anodized, matte black. AR-15/M16 models are compatible with AR-15/M16 uppers.

more >>
Brownells
$89.99 See It
Ar-15/M16 Charging Handle Spring - Charging Handle Latch Spring
Brownells
$1.29 See It
Ar-15/M16 Charging Handle Spring - Charging Handle Latch Spring
Brownells
$1.29 See It
Search within results
  • Find by Price
    • $ to $
  • Category
  • Shop