1 to 2 of  2 products for ar 15 m16 carbine recoil buffers st t3 extra heavy buffer

Result for "ar 15 m16 carbine recoil buffers st t3 extra heavy buffer"
Ar-15/M16 Carbine Recoil Buffers - St-T3 Extra-Heavy Buffer

Machined aluminum recoil buffer comes in three weights, so you can select the buffer that gives the best combination of recoil control and reliability in your carbine with an M4-type adjustable stock. All have a mil-spec polyurethane bumper, durable hard-anodized finish, and the Spike’s logo. ST-T1 is a standard-weight (3 oz.) buffer filled with low-density tungsten powder (LDTP) that eliminates the noise and shock caused by the hard reciprocating weights found in the original-style factory buffer. Aids in smoother cycling and helps minimize bolt bounce. ST-T2 is filled with high-density tungsten powder (HDTP) for extra weight (4.1 oz.) behind the carrier to reduce cycle rate. Help you Mfg: Spikes Tactical SPECS: Aluminum, hardcoat anodized, black. Polyurethane bumper. 3¼" (8.2cm) long. ST-T1 – 3 oz. (85g) wt.; ST-T2 - 4.1 oz. (117g) wt.; ST-T3 – 5.4 oz. (153g) wt. Fits AR-15 carbines with M4-type collapsible stock only.

more >>
Brownells
$42.99 See It
Ar-15/M16 Carbine Recoil Buffers - St-T2 Heavy Buffer

Machined aluminum recoil buffer comes in three weights, so you can select the buffer that gives the best combination of recoil control and reliability in your carbine with an M4-type adjustable stock. All have a mil-spec polyurethane bumper, durable hard-anodized finish, and the Spike’s logo. ST-T1 is a standard-weight (3 oz.) buffer filled with low-density tungsten powder (LDTP) that eliminates the noise and shock caused by the hard reciprocating weights found in the original-style factory buffer. Aids in smoother cycling and helps minimize bolt bounce. ST-T2 is filled with high-density tungsten powder (HDTP) for extra weight (4.1 oz.) behind the carrier to reduce cycle rate. Help you Mfg: Spikes Tactical SPECS: Aluminum, hardcoat anodized, black. Polyurethane bumper. 3¼" (8.2cm) long. ST-T1 – 3 oz. (85g) wt.; ST-T2 - 4.1 oz. (117g) wt.; ST-T3 – 5.4 oz. (153g) wt. Fits AR-15 carbines with M4-type collapsible stock only.

more >>
Brownells
$39.99 See It
Additional items that match your search
Ar-15/M16 Carbine Recoil Buffers - St-T1 Standard Buffer

Machined aluminum recoil buffer comes in three weights, so you can select the buffer that gives the best combination of recoil control and reliability in your carbine with an M4-type adjustable stock. All have a mil-spec polyurethane bumper, durable hard-anodized finish, and the Spike’s logo. ST-T1 is a standard-weight (3 oz.) buffer filled with low-density tungsten powder (LDTP) that eliminates the noise and shock caused by the hard reciprocating weights found in the original-style factory buffer. Aids in smoother cycling and helps minimize bolt bounce. ST-T2 is filled with high-density tungsten powder (HDTP) for extra weight (4.1 oz.) behind the carrier to reduce cycle rate. Help you Mfg: Spikes Tactical SPECS: Aluminum, hardcoat anodized, black. Polyurethane bumper. 3¼" (8.2cm) long. ST-T1 – 3 oz. (85g) wt.; ST-T2 - 4.1 oz. (117g) wt.; ST-T3 – 5.4 oz. (153g) wt. Fits AR-15 carbines with M4-type collapsible stock only.

more >>
Brownells
$34.99 See It
Standard Weight Carbine Recoil Buffer - Ar-15/M16 Standard Weight Carbine Recoil Buffer

This carbine length recoil buffer is the standard 3 oz. wieght that fits an AR-15/M16. Mfg: D.S. Arms

more >>
Brownells
$11.99 See It
Ar-15/M16 Carbine Mil-Spec Buttstock Kit - Ar15 M4 Stock Assembly Mil-Spec -17%

Collapsible buttstock similar to the current US GI M4 carbine stock provides convenient six-position length-of-pull adjustment to fit different-size shooters, including those wearing body armor. Ready to install on any standard AR-15 rifle or carbine lower receiver; includes buffer tube, receiver lock plate, lock nut, toe-mounted steel sling loop, carbine recoil spring and buffer. Buttstock is made from extremely tough, fiberglass-reinforced, injection-molded nylon to resist impact, heat, moisture, extreme cold, and most cleaning solvents. Steel lock nut has four square notches and pre-cut detents for staking to lock plate. Available with Mil-Spec (nominal 1.14" O.D.) receiver extens Mfg: Brownells SPECS: Aluminum and fiberglass-reinforced, injection-molded nylon, matte black. 8¾" (22.2cm) OAL collapsed; 11¾" (29.9cm) OAL fully extended

more >>
Brownells
$59.99 $49.99 See It
Ar-15/M16 Carbine Commercial Buttstock Kit - Ar-15/M16/M4 Collapsible Buttstock

Collapsible buttstock similar to the current USGI M4 carbine stock provides convenient six-position length-of-pull adjustment to fit different-size shooters, including those wearing body armor. Ready to install on any standard AR-15 rifle or carbine lower receiver; includes 1.17'''' diameter commercial buffer tube, receiver lock plate, lock nut, toe-mounted steel sling loop, carbine recoil spring and buffer. Convert a fixed-stock, flattop rifle to M4 carbine configuration without permanent alterations to gun. Buttstock made from extremely tough, fiberglass-reinforced, injection-molded nylon that resists impact, heat, moisture, extreme cold, and most cleaning solvents. Stock interior diameter is Mfg: Brownells SPECS: Aluminum and fiberglass-reinforced, injection-molded nylon, matte black. 8¾� (22.2cm) OAL collapsed; 11¾� (29.9cm) OAL fully extended.

more >>
Brownells
$79.99 See It
Ar-15/M16 5.56 Carbine Barrels - 16'''' Ar Barrel Threaded, Fluted 1:7

Black nitride, carbine-length barrels are chambered for 5.56mm NATO and have 1-7" rifling that helps stabilize heavy bullets. Exterior is sized to accept a .750" gas block, with the gas port positioned for a carbine-length gas system. Threaded ½"-28 tpi muzzle accepts a standard AR-15/M16 flash suppressor or muzzle brake. Pre-installed barrel extension has M4 feed ramp cuts that aid in reliable feeding. Fluted model has distinctive diamond cuts on the exterior that reduce weight, enhance rigidity, and give your rifle a unique custom look. Also provides extra surface area to aid in cooling the barrel. Mfg: Yankee Hill Machine Co., Inc. SPECS: 4140 carbon steel, heat treated to Rc 25-32, matte black nitride finish. 16.5" OAL. .750" O.D. at gas block. Muzzle threaded ½" x 28. 1-7" rifling twist rate.

more >>
Brownells
$214.99 See It
Ar-15/M16 5.56 Carbine Barrels - Chrome Lined 11-1/2'''' A1 Barrel

Ready-to-install barrels let you customize your AR-15/M16/M4/CAR-15 or replace a “shot-out” factory barrel with one that preserves your gun’s original specs and appearance. Machined from 4140 steel, with a dark gray, military-type Parkerized finish. Button-cut, six groove rifling with 1:9 right-hand twist provides superb accuracy with most bullet weights. Barrel extension has M4-type feed ramps to help ensure smooth feeding and prevent jams. Barrel nut and handguard retainer cap included. Forged front sight housing has integral bayonet lug, and muzzle is threaded to accept the flash hider or compensator of your choice. Choose from Chrome Lined for maximum bore life or St Mfg: Double Star SPECS: 4140 steel, dark gray Parkerized finish. A1 - .675" (1.71cm) OD under handguard, .625" (1.59cm) at front sight housing, ½"-28 tpi threaded muzzle with .600" (1.52cm) dia. shoulder behind threads. HBAR - .870" ( 2.21cm) OD under handguard, .750" (1.91cm)

more >>
Brownells
$269.99 See It
Ar-15/M16 223 Wylde Match Barrels - 16'''' Mid-Length Carbine Barrel -11%

Precision-machined stainless steel barrels feature a .223 Wylde chamber that helps maximize the long-range performance of your AR-15 with both .223 Remington and 5.56x45mm NATO ammunition. With 6-groove, 1-7" button rifling for accuracy and M4-type feed ramps for reliable feeding, these barrels help you reach out to distant targets with issued or magazine-length ammunition. The 18" barrels offer the Special Purpose Rifle (SPR) profile designed to optimize accuracy out to 600 meters, and are available with Mid-Length or Rifle-Length gas systems. SDM barrel features a heavy, fluted profile under the handguards, for added strength and rigidity.  Threaded muzzle accepts a varie Mfg: White Oak Armament SPECS: Stainless steel, natural finish. .750" (1.9cm) O.D. at gas port. Barrel extension .999" (2.5cm) O.D. 6-groove, 1-7" rifling. Muzzle threads: ½"-28 tpi. 16" Carbine - 2 lbs. 2oz. (963g). 18" Mid-Length/Rifle - 2 lbs. 9oz. (1.1kg).SDM

more >>
Brownells
$269.99 $239.99 See It
Ar-15 Carbine Complete Upper Receiver Assemblies - Ar15 7'''' Upper Receiver Assembly

AR-15 Upper Receivers ready to install on SBR or Pistol lower receivers.  Available with 14.5, 11.5 or 7 inch barrels, featuring a 1-9 twist and 5.56mm chambers.  Barrels feature a pinned front sight base.  Other features includes flat top upper receiver,  bolt carrier group, charging handle and A2 flash hider.  11.5" model available with AAC 51T Blackout Flash Hider.  14.5" & 11.5" models include a two peice carbine handguard. 7" model features a 4" free float tube. All NFA rules apply. Mfg: Dpms SPECS: Fit standard AR-15/M16 lower receivers.  Only for use on SBR or Pistol lower receivers.

more >>
Brownells
$569.99 See It
Ar-15/M16 5.56 Carbine Barrels - Chrome Lined 16'''' Hbar Barrel

Ready-to-install barrels let you customize your AR-15/M16/M4/CAR-15 or replace a “shot-out” factory barrel with one that preserves your gun’s original specs and appearance. Machined from 4140 steel, with a dark gray, military-type Parkerized finish. Button-cut, six groove rifling with 1:9 right-hand twist provides superb accuracy with most bullet weights. Barrel extension has M4-type feed ramps to help ensure smooth feeding and prevent jams. Barrel nut and handguard retainer cap included. Forged front sight housing has integral bayonet lug, and muzzle is threaded to accept the flash hider or compensator of your choice. Choose from Chrome Lined for maximum bore life or St Mfg: Double Star SPECS: 4140 steel, dark gray Parkerized finish. A1 - .675" (1.71cm) OD under handguard, .625" (1.59cm) at front sight housing, ½"-28 tpi threaded muzzle with .600" (1.52cm) dia. shoulder behind threads. HBAR - .870" ( 2.21cm) OD under handguard, .750" (1.91cm)

more >>
Brownells
$269.99 See It
Ar-15/M16 Yhm-7300 ''''entry Level'''' 9mm Upper Receiver Kit - 9mm Entry Upper Receiver Kit

Complete upper allows you to use fast-shooting, economical 9mm handgun ammunition in your AR. Mil-spec, flattop receiver is T-marked for the easy re-mounting of optics or other accessories and is ready for mounting on a mil-spec lower receiver. Key components include a CMMG ramped 9mm bolt/carrier assembly, heavy-weight buffer, 32-round magazine and Hahn Precision Mag Adapter. A Yankee Hill flash hider, gas block with a top-mounted Picatinny rail, a rugged YHM-9645 free-float, solid aluminum, carbine-length handguard and a compact 16" barrel complete this reliable, high-performance kit. Mfg: Yankee Hill Machine Co., Inc. SPECS: Receiver - 7075 T6 aluminum, mil-spec Type III hardcoat anodized finish, matte black. Fits mil-spec AR-15/M16 lower receivers with .250” pivot/takedown pins. Barrel - Chrome-moly Vanadium steel, heat treated to Rc 25-32, matte black finish. 16” (40.6cm) long. Chambered for 9x19

more >>
Brownells
$899.99 See It
Ar-15 Carbine Buffer Spring - Ar-15/M16 Carbine Recoil Spring

This recoil spring is carbine length, and is the replacement you need when your current spring wears out. For use on AR-15/M16 platforms. Mfg: D.S. Arms

more >>
Brownells
$2.99 See It
Ar-15 Carbine Complete Upper Receiver Assemblies - Ar15 11.5'''' Upper Receiver Assembly W/ 51t Aac Blackout

AR-15 Upper Receivers ready to install on SBR or Pistol lower receivers.  Available with 14.5, 11.5 or 7 inch barrels, featuring a 1-9 twist and 5.56mm chambers.  Barrels feature a pinned front sight base.  Other features includes flat top upper receiver,  bolt carrier group, charging handle and A2 flash hider.  11.5" model available with AAC 51T Blackout Flash Hider.  14.5" & 11.5" models include a two peice carbine handguard. 7" model features a 4" free float tube. All NFA rules apply. Mfg: Dpms SPECS: Fit standard AR-15/M16 lower receivers.  Only for use on SBR or Pistol lower receivers.

more >>
Brownells
$599.99 See It
Ar-15 Carbine Complete Upper Receiver Assemblies - Ar15 11.5'''' Upper Receiver Assembly

AR-15 Upper Receivers ready to install on SBR or Pistol lower receivers.  Available with 14.5, 11.5 or 7 inch barrels, featuring a 1-9 twist and 5.56mm chambers.  Barrels feature a pinned front sight base.  Other features includes flat top upper receiver,  bolt carrier group, charging handle and A2 flash hider.  11.5" model available with AAC 51T Blackout Flash Hider.  14.5" & 11.5" models include a two peice carbine handguard. 7" model features a 4" free float tube. All NFA rules apply. Mfg: Dpms SPECS: Fit standard AR-15/M16 lower receivers.  Only for use on SBR or Pistol lower receivers.

more >>
Brownells
$529.99 See It
Ar-15/M16 Carbine Handguard - M4 Carbine Handguard, Single Shield

Snap-on USGI-type replacement for your carbine’s factory-original handguard is made of tough, fiberglass-reinforced, injection-molded polymer that delivers superior impact and abrasion resistance. The ridged gripping surface and top/bottom vent holes retain the weapon’s authentic military look, while an internal heat shield of lightweight aluminum protects your hand from barrel heat. M4 model has standard-issue single-layer heat shield on upper and lower handguard. Fits AR-15/M16/M4 with carbine-length gas system. Mfg: Double Star SPECS: Fiberglass-reinforced polymer, matte black. 6½” (16.5cm) long. Standard – Approx. 2½” (6.4cm) O.D. at rear tapering to 2¼” (5.7cm) O.D. at front. Single Heat Shield.

more >>
Brownells
$17.99 See It
Ar-15/M16 Moe Commercial Buttstocks - Commerical Moe Buttstock, Dark Earth

Magpul Original Equipment (MOE) carbine buttstock provides the quality, durability, and ergonomic benefits of Magpul’s CTR stock in a rugged, economical, drop-in package. Strong, A-frame design is lightweight and comfortable, yet provides operator with plenty of support. Comb contour is wider than standard issue M4 stock to help shooter maintain a solid, consistent cheekweld. Streamlined exterior and protected release lever won’t snag on clothing, gear, vehicle interior, or vegetation. Heavy duty, spring-loaded release lever allows fast length-of-pull adjustments and won’t dig into your hand. Impact- and heat-resistant, polymer construction includes molded-in reinforceme Mfg: Magpul SPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, Foliage Green or Pink. 7¼" (cm) OAL, 5¼" (13.3cm) high. Commercial fits rifles with 1.17” O.D. commercial AR-15 carbine buffer tubes.

more >>
Brownells
$37.95 See It
Ar-15/M16 Heavy Buffers - Ar15/M16 Heavy Buffer

These heavier AR15/M16 buffers assist in improving reliability in rifles with a shorter gas system.  Heavier weight also assists in reducing bolt bounce in full auto fire.  An added benefit, is a slight reduction in felt recoil. Mfg: Dpms SPECS: Fits - AR15/M16 rifles.  H2 weight - 4.6 oz.  Heavy weight - 3.55 oz.

more >>
Brownells
$28.99 See It
Ar-15/M16 Carbine Commercial Buttstock - M4 Adjustable Buttstock

Six position, machined 6061-T6 heat treated aluminun tube and Nylon 66 buttstock with 33% more glass for strength provide a durable stock system built to meet the demands of the toughest tactical environments. Buttplate, adjustment latch, and latch nut are slightly radiused and contoured to reduce snagging on clothing or equipment. Extra material around the latch hole provides additional strength. Four flats on the buffer tube make it easier for sand and debris to fall out and not hinder stock adjustment. Furnished with buffer tube, recoil spring, receiver plate, rear sling swivel and lock-nut. Made in the USA. Mfg: Double Star SPECS: Aluminum tube, synthetic nylon stock, black. Length of pull: closed – 10¼” (26cm), extended – 13-5/8” (34.6cm).

more >>
Brownells
$79.99 See It
Ar-15/M16 T6 Commercial Buttstock Kits - Ar-15 T6 Collapsible Stock, Flat Dark Earth

Easy-to-install kit contains everything you need to convert a fixed-stock AR-15 rifle to a GI-style collapsible carbine stock system, or use to complete a custom-built carbine. Lets you easily adjust length of pull for different-stature shooters and different tactical situations and clothing/armor configurations. Kit includes 1.17" O.D. commercial receiver extension tube with six, positive-locking notches for the T6 buttstock of tough, durable fiberglass-reinforced molded polymer. Also includes steel receiver lock plate, steel lock nut, polymer sling loop, carbine recoil spring, and carbine buffer. Requires no permanent alterations to rifle. Installation instructions included. Mfg: Tapco Weapons Accessories SPECS: Aluminum and reinforced injection-molded polymer, matte black. 8” (20.3cm) OAL collapsed; 11¾” (29.9cm) OAL fully extended.

more >>
Brownells
$68.99 See It
Search within results
  • Find by Price
    • $ to $
  • Category
  • Shop