1 to 4 of  4 products for ar 15 stripped upper receiver stripped a2 upper receiver

Result for "ar 15 stripped upper receiver stripped a2 upper receiver"
Stripped A2 Upper Receiver

Fully machined and finished, military style uppers ready for you to install your choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15. Choose from rugged A2 carry handle style, complete with cuts for mounting A2 rear sight, or A3 flattop with M4-type feed ramp cuts and Picatinny accessory rail for mounting a scope, holographic sight, or flip-up "iron" sights. Both models feature shell deflector, forward assist housing, and provisions for installing an ejection port cover. Precision machined from a premium-grade aluminum forging and hardcoat anodized for extra strength, with a tough, scratch-resistant Teflon coating. Mfg: Dpms SPECS: Aluminum, hard anodized, Teflon coated, matte black. Fits mil-spec AR-15 lower receiver with .250" pivot pins.

more >>
Brownells
$99.99 See It
Ar-15 Upper Receiver Block

Machined from tough, long-wearing nylon to hold upper receiver in a bench vise without fear of crushing, marking or scratching the finish. Fits inside stripped or barreled, carry handle and flattop receivers with .250'''' diameter pivot pins. Holds receivers at any angle for cleaning, or fitting sights and accessories. Models to fit standard AR-15 and DPMS AR-style .308 receivers. Mfg: Dpms SPECS: Nylon, white. AR-15 - 7 (17.8cm) long, 1¾ (4.5cm) wide, 2-7/8'''' (7.3cm) high. DPMS .308 - 7-3/8'''' (18.7cm) long, 1-7/8'''' (4.8cm) wide, 3 (7.6cm) high. Fits DPMS Panther AR-style .308 receivers.

more >>
Brownells
$45.99 See It
Ar15/M16 Stripped Upper Receiver Groups - Stripped Urg 16'''' 5.56 1:7 M4 Car Fsp

Features: Cold Hammer Forged barrel 16" barrel with Carbine or Mid-Length gas system Magnetic Particle Inspected on site by Daniel Defense Chrome lined bore and chamber Mil-Spec 1-7 twist 5.56x45mm NATO chamber M4 feedramps Upper Receiver is machined from a 7075 aluminum forging Upper is Type III hard coat anodized "F" marked front sight base Chrome moly vanadium steel barrel Mil-spec heavy phosphate finish on barrel ½-28 TPI muzzle threads .750" OD at gas block Barrel nut, delta ring assembly, A2 flash hider, gas tube, forward assist, ejection port cover, and front s Mfg: Daniel Defense

more >>
Brownells
$459.00 See It
Ar15/M16 Stripped Upper Receiver Groups - Stripped Urg 16'''' 5.56 1:7 Govt Mid Fsp

Features: Cold Hammer Forged barrel 16" barrel with Carbine or Mid-Length gas system Magnetic Particle Inspected on site by Daniel Defense Chrome lined bore and chamber Mil-Spec 1-7 twist 5.56x45mm NATO chamber M4 feedramps Upper Receiver is machined from a 7075 aluminum forging Upper is Type III hard coat anodized "F" marked front sight base Chrome moly vanadium steel barrel Mil-spec heavy phosphate finish on barrel ½-28 TPI muzzle threads .750" OD at gas block Barrel nut, delta ring assembly, A2 flash hider, gas tube, forward assist, ejection port cover, and front s Mfg: Daniel Defense

more >>
Brownells
$459.00 See It
Additional items that match your search
Ar-15/M16 Stripped Upper Receiver - Ar15/M16 Stripped Upper Receiver -13%

Final machined from a 7075-T6 forging, this stripped mil-spec flattop upper receiver features M4 feed ramps for reliable round feeding with short gas systems. A slick, dry film lube applied to the interior cuts down on wear, helps keep the action moving smoothly, and cuts down on fouling. Picatinny top rail is T-marked. Mfg: Tactical Machining SPECS: 7075 T6 aluminum, hardcoat anodized, matte black finish. Fits standard AR15/M16 lower receivers with .250" pivot/takedown pins. ½ lb. (226.8g) wt.

more >>
Brownells
$79.99 $69.99 See It
Ar-15 Stripped Billet Lower Receiver - P-415 Ar-15 .223 Lower Receiver, Teflon

Stripped, semi-auto lower receiver is fully machined from U.S.-sourced 7075 T6 aluminum billet for superb strength and precise dimensions. Extra metal in the right places gives a big payoff in added support and rigidity with minimal extra weight. Available in AR-15 and AR-style .308 sizes, both models accept mil-spec and aftermarket components, so you can select the upper, trigger group, pistol grip, receiver extension, and buttstock that best serve your needs-the perfect foundation for a custom tactical rifle. Integral, oversized triggerguard machined as part of the receiver further enhances structural rigidity and provides plenty of clearance for trigger finger when wearing gloves Mfg: Patriot Ordnance Factory SPECS: 7075 T6 aluminum, hardcoat anodized. Small-pin, .154" (3.9mm) hammer/trigger pin holes. P-415 - Available with matte black Teflon finish or matte medium gray NP3 finish. Accepts mil-spec AR-15/M16 rifle or carbine upper receiver and internal components. .250" (6.3mm) pivot/takedo

more >>
Brownells
$339.99 See It
Ar-15 Stripped Upper Receiver - Stripped Upper Receiver

YHM machines these receivers to precise final specifications from 7075 aluminum forgings to produce a tough, high-quality upper you can depend on. Features include M4-pattern feed cuts for reliable feeding, engraved "T" marks on the rail for precise optic positioning, and a military-style, hard-anodized finish that will stand up to rough use. Fits standard AR-15 and M16 lower receivers, and accepts any mil-spec barrels, handguards, and other components. Mfg: Yankee Hill Machine Co., Inc. SPECS: 7075 T6 aluminum, hardcoat anodized matte black. Stripped receiver only; no parts included. Accepts .250 dia." takedown and pivot pins.

more >>
Brownells
$99.99 See It
Ar-15 Stripped Lower Receiver -28%

Stripped, small pin, semi-auto lower receiver is precision machined from a durable, 7075 T6 aluminum forging. Stamped "Cal Multi," this versatile mil-spec receiver can be the foundation for rifle builds on 5.56/.223, 6.5mm, 6.8mm, 300 AAC Blackout, 9mm Luger, or other chamberings that fit the standard AR-15 receiver. Holes, inletting and pin locations have been cut to final dimensions and accept standard AR-15 magazines and components. Clearly stamped safe/fire switch position indicators ensure that you can easily identify the service state of the rifle. Mfg: Aero Precision SPECS: 7075 T6 aluminum, hardcoat anodized, matte black. Small pin, .154" (3.9mm) hammer/pin holes. .250" (6.3mm) pivot/takedown pin holes. FFL required for purchase.

more >>
Brownells
$89.99 $64.99 See It
Ar-15 Stripped Lower Receiver

Stripped, semi-auto, lower receiver delivers custom shop quality without the typical custom shop price. Perfect platform for building the ultimate, mission-specific, AR-15 rifle or carbine. Made from a high-strength, 7075 T6 aluminum forging for reliable performance and outstanding durability. Mil-Spec, hard anodized finish adds extra strength to the receiver walls and delivers superior abrasion-resistance for rugged field use. Precision-machined to ensure drop-in installation of Mil-Spec, aftermarket components. Mfg: Anderson Manufacturing SPECS: Fits - Standard AR-15 components.

more >>
Brownells
$49.99 See It
Ar-15 Carbine Complete Upper Receiver Assemblies - Ar15 7'''' Upper Receiver Assembly

AR-15 Upper Receivers ready to install on SBR or Pistol lower receivers. Available with 14.5, 11.5 or 7 inch barrels, featuring a 1-9 twist and 5.56mm chambers. Barrels feature a pinned front sight base. Other features includes flat top upper receiver, bolt carrier group, charging handle and A2 flash hider. 11.5" model available with AAC 51T Blackout Flash Hider. 14.5" & 11.5" models include a two peice carbine handguard. 7" model features a 4" free float tube. All NFA rules apply. Mfg: Dpms SPECS: Fit standard AR-15/M16 lower receivers. Only for use on SBR or Pistol lower receivers.

more >>
Brownells
$569.99 See It
Ar-15/M16 Stripped Upper Receiver - Ar-15/M16 Stripped Upper Matte Black W/Markings -32%

The Aero Precision upper is made of 7075 aircraft aluminum for superior strength and given a super tough, Type 3 hardcoat anodized finish for excellent wear resistance. Models with laser-engraved T-marks and an American flag on the Picatinny rail, plus M4-type feed cuts inside for reliable feeding also available. Compatible with standard, mil-spec AR lowers and components. Also available without a forward assist, for those seeking to save weight, or who do not desire the option. A really high-quality receiver at a great price! Mfg: Aero Precision SPECS: 7075 T6 aluminum, hardcoat anodized, matte black. Uses .250" pivot and takedown pins. Available with Black, FDE/Desert or Sniper Gray Cerakote finish.

more >>
Brownells
$84.99 $57.99 See It
Ar-15 Cerekote Stripped Lower Receivers - Ar-15 Stripped Lower Receiver Cerakote Desert

Stripped, small pin, semi-auto lower receiver is precision machined from a durable, 7075 T6 aluminum forging. Stamped "Cal Multi," this versatile mil-spec receiver can be the foundation for rifle builds on 5.56/.223, 6.5mm, 6.8mm, 300 AAC Blackout, 9mm Luger, or other chamberings that fit the standard AR-15 receiver. Holes, inletting and pin locations have been cut to final dimensions and accept standard AR-15 magazines and components. Clearly stamped safe/fire switch position indicators ensure that you can easily identify the service state of the rifle. Mfg: Aero Precision SPECS: 7075 T6 aluminum, Desert or Sniper Gray Cerakote finish. Small pin, .154" (3.9mm) hammer/pin holes. .250" (6.3mm) pivot/takedown pin holes. FFL required for purchase.

more >>
Brownells
$109.99 See It
Ar-15 Carbine Complete Upper Receiver Assemblies - Ar15 11.5'''' Upper Receiver Assembly

AR-15 Upper Receivers ready to install on SBR or Pistol lower receivers. Available with 14.5, 11.5 or 7 inch barrels, featuring a 1-9 twist and 5.56mm chambers. Barrels feature a pinned front sight base. Other features includes flat top upper receiver, bolt carrier group, charging handle and A2 flash hider. 11.5" model available with AAC 51T Blackout Flash Hider. 14.5" & 11.5" models include a two peice carbine handguard. 7" model features a 4" free float tube. All NFA rules apply. Mfg: Dpms SPECS: Fit standard AR-15/M16 lower receivers. Only for use on SBR or Pistol lower receivers.

more >>
Brownells
$529.99 See It
Ar-15 Carbine Complete Upper Receiver Assemblies

AR-15 Upper Receivers ready to install on SBR or Pistol lower receivers. Available with 14.5, 11.5 or 7 inch barrels, featuring a 1-9 twist and 5.56mm chambers. Barrels feature a pinned front sight base. Other features includes flat top upper receiver, bolt carrier group, charging handle and A2 flash hider. 11.5" model available with AAC 51T Blackout Flash Hider. 14.5" & 11.5" models include a two peice carbine handguard. 7" model features a 4" free float tube. All NFA rules apply. Mfg: Dpms SPECS: Fit standard AR-15/M16 lower receivers. Only for use on SBR or Pistol lower receivers.

more >>
Brownells
$549.99 See It
Ar-15/M16 Upper Receivers - Ar15/M16 16'''' Rxa15 Ss M4 Mod Upper Receiver

Upper assemblies readily fit onto standard AR-15 lowers and feature 416R stainless steel barrels that resist weather and corrosion. Chambered in 5.56, barrels feature extensions with M4 feedramps to enhance reliable operation. Uppers are flattop with white T-marks and include fully-installed forward assist and dust cover. 7½" and M4 uppers have modular handguards compatible with Magpul rail segments and have stainless steel A2 flashhiders. All models except for the 7½" have railed gas blocks to accept clamp-on front sights or other accessories. Bull Barrel models have round handguards and target crown muzzles to enhance accuracy potential. Charging handle, bolt, an Mfg: Red X Arms SPECS: Machined 7075 T6 aluminum, hardcoat anodized, matte black finish. Barrels 416R stainless steel. 1-9" twist. 20" and 24" bull barrels 1-8" twist.

more >>
Brownells
$330.00 See It
Ar-15/M16 Nib-X Coated Upper Receiver - Nib-X Upper Receiver, Black

Stripped receiver has WMD's NiB-X nickel boron coating inside and out to provide an exceptionally tough, ultra-smooth surface finish for outstanding wear resistance and lubricity. A ceramic topcoat is applied for color on the exterior only, leaving the nickel boron exposed inside to keep friction with the bolt carrier to the absolute minimum. Works great with standard carriers, too, but even smoother with nickel boron coated bolt carriers, including WMD's NiB-X coated carrier, available separately. M4 feed ramps ensure reliable feeding. Mfg: Wmd Guns SPECS: 7075 T6 aluminum, NiB-X coating with matte ceramic finish, Black or Flat Dark Earth. Stripped receiver only. Fits standard AR-15/M16 lowers, and accepts standard barrels and upper receiver parts. .250" dia. pivot/takedown pin holes. M4 feed ramps.

more >>
Brownells
$142.99 See It
Ar-15/M16 300 Blackout Upper Receiver - Ar-15/M16 300 Blackout Complete Upper Receiver

Complete 300 Blackout upper receiver drops in to standard AR-15 lowers to give reduced overall length without requiring extra paperwork for a short-barreled rifle. Upper has 11" barrel with a permanently-attached shroud that extends to just over 16". Sound suppressors can fit down into the shroud, allowing user to attach suppressor without adding significant length. Upper includes fake suppressor, along with complete bolt and carrier group, charging handle, dust cover and forward assist. Features two-piece free float rail for optics and accessories. Mfg: Tactical Solutions, Llc SPECS: Complete upper, hardcoat anodized, matte black finish. Barrel 11" (28cm) long. Shroud 5.1" (13cm) long. Accepts suppressors with maximum O.D. 1-3/4" (4.4cm) and minimum length 6-1/2" (16.5cm), that fit onto 5/8-24 threads. All NFA rules apply.

more >>
Brownells
$1,149.99 See It
Ar-15 Carbine Complete Upper Receiver Assemblies - Ar15 11.5'''' Upper Receiver Assembly W/ 51t Aac Blackout

AR-15 Upper Receivers ready to install on SBR or Pistol lower receivers. Available with 14.5, 11.5 or 7 inch barrels, featuring a 1-9 twist and 5.56mm chambers. Barrels feature a pinned front sight base. Other features includes flat top upper receiver, bolt carrier group, charging handle and A2 flash hider. 11.5" model available with AAC 51T Blackout Flash Hider. 14.5" & 11.5" models include a two peice carbine handguard. 7" model features a 4" free float tube. All NFA rules apply. Mfg: Dpms SPECS: Fit standard AR-15/M16 lower receivers. Only for use on SBR or Pistol lower receivers.

more >>
Brownells
$599.99 See It
Ar-15 Upper & Lower Receiver Set - Custom Upper/Lower Combo - Skulls

Matched flattop upper and lower receiver have been machined from 7075 T6 aluminum billet to strict tolerances, so they accept internal parts for standard mil-spec AR-15 receivers. Integral triggerguard machined right into the lower and extra metal at stress points add exceptional strength and structural rigidity. Includes provisions for forward assist and ejection port cover, as well as engraved pictogram markings for safety position. Ceramic coating gives excellent wear and corrosion protection, while the unique skull-pattern graphic makes your rifle look unlike any other on the firing line! Mfg: Black Rain Ordnance Inc. SPECS: Machined 7075 T6 aluminum, ceramic coated, matte black-and-white skull pattern finish. .250" pivot/takedown pin holes. .154" hammer/trigger pin holes. No internal parts included. FFL required for purchase.

more >>
Brownells
$499.99 See It
Ar-15/M16 Upper Receivers - Ar15/M16 7.5'''' Rxa15 Ss Mod Upper Receiver

Upper assemblies readily fit onto standard AR-15 lowers and feature 416R stainless steel barrels that resist weather and corrosion. Chambered in 5.56, barrels feature extensions with M4 feedramps to enhance reliable operation. Uppers are flattop with white T-marks and include fully-installed forward assist and dust cover. 7½" and M4 uppers have modular handguards compatible with Magpul rail segments and have stainless steel A2 flashhiders. All models except for the 7½" have railed gas blocks to accept clamp-on front sights or other accessories. Bull Barrel models have round handguards and target crown muzzles to enhance accuracy potential. Charging handle, bolt, an Mfg: Red X Arms SPECS: Machined 7075 T6 aluminum, hardcoat anodized, matte black finish. Barrels 416R stainless steel. 1-9" twist. 20" and 24" bull barrels 1-8" twist.

more >>
Brownells
$330.00 See It
Search within results
  • Find by Price
    • $ to $
  • Category
  • Shop