1 to 20 of  100 products for ar15 chamber safety flag ar15 chamber safety flag pkg 3

No exact matches found for ar15 chamber safety flag ar15 chamber safety flag pkg 3

100 similar items found

Ar-15/M16 Msr/Ar Cleaning System - Msr/Ar Cleaning System

Versatile, go-anywhere cleaning kit is the all-in-one cleaning solution for your .223/5.56 AR-15. Use it at the range or in the field without disassembly for quick touch-ups or at home for a thorough breech-to-muzzle cleaning. Kit features Otis’s B.O.N.E. (Bolt Operational Necessary Equipment) Tool® for servicing the bolt, 8" and 30" Memory-Flex® cleaning cables, two Mongoose® brush/swab combos, a chamber brush, .22 cal slotted tip, and a ½ oz. tube of O85 Ultra Bore® solvent. Also has an assortment of brushes, scrapers, cleaning patches, and picks to help you keep your AR clean. Comes in a durable, belt-attachable nylon carry case. Mfg: Otis SPECS: Contains 8" and 30" cleaning cables,.22 cal. slotted tip and obstruction tool, bore reflector/safety flag, (2) bore brushes, (2) Mongoose brush/swabs, (10) 2" cleaning patches, 5.56mm chamber brush, straight and curved locking lug picks, nylon ended brush, short A/P receiver

more >>
Brownells
$56.99 See It
Chamber Safety Tool - Chamber Safety Tool Multi-Pack

Bright yellow safety flag fits into the chamber of a semi-auto pistol, rifle, or shotgun to indicate the weapon is unloaded and safe during storage or training. End of the flag can be used as a non-marring pin punch to push out takedown/pivot pins on an AR-15/M16 or trigger pins on other guns. The flat edge of the flag head can be used on scope windage and elevation knobs instead of a slot head screwdriver. Separate Pistol or Rifle. Multi-Pack contains six each of the pistol, rifle, and shotgun tools. Durable, flexible polymer composite won’t mar gun’s finish. Mfg: Tapco Weapons Accessories SPECS: Polymer, yellow. Pistol – 15/8" (4.1cm) long. Rifle – 3" (7.6cm) long.

more >>
Brownells
$17.99 See It
Chamber Safety Tool - Rifle Chamber Safety Tool, 6-Pak

Bright yellow safety flag fits into the chamber of a semi-auto pistol, rifle, or shotgun to indicate the weapon is unloaded and safe during storage or training. End of the flag can be used as a non-marring pin punch to push out takedown/pivot pins on an AR-15/M16 or trigger pins on other guns. The flat edge of the flag head can be used on scope windage and elevation knobs instead of a slot head screwdriver. Separate Pistol or Rifle. Multi-Pack contains six each of the pistol, rifle, and shotgun tools. Durable, flexible polymer composite won’t mar gun’s finish. Mfg: Tapco Weapons Accessories SPECS: Polymer, yellow. Pistol – 15/8" (4.1cm) long. Rifle – 3" (7.6cm) long.

more >>
Brownells
$7.99 See It
Ar-15 Chamber Safety Flag - Chamber Flag-3 Pack

Bright yellow color provides instant recognition, indicates a safe weapon to range safety officers. Solidly built to withstand accidental bolt slamming. Curved probe stays in chamber with bolt open. Approved for DCM/NRA competition. Mfg: Sinclair International SPECS: Plastic, yellow. 5½'''' (14cm) long. Pak of 3.

more >>
Brownells
$5.99 See It
Chamber Safety Tool - Pistol Chamber Safety Tool, 6-Pak

Bright yellow safety flag fits into the chamber of a semi-auto pistol, rifle, or shotgun to indicate the weapon is unloaded and safe during storage or training. End of the flag can be used as a non-marring pin punch to push out takedown/pivot pins on an AR-15/M16 or trigger pins on other guns. The flat edge of the flag head can be used on scope windage and elevation knobs instead of a slot head screwdriver. Separate Pistol or Rifle. Multi-Pack contains six each of the pistol, rifle, and shotgun tools. Durable, flexible polymer composite won’t mar gun’s finish. Mfg: Tapco Weapons Accessories SPECS: Polymer, yellow. Pistol – 15/8" (4.1cm) long. Rifle – 3" (7.6cm) long.

more >>
Brownells
$7.99 See It
Ar-15/M16 Dust Cover Safety Flag - Dust Cover Safety Flag

Bright, highly-visible yellow insert instantly lets the RSO and other shooters know your weapon is unloaded and safe. Perfect for training exercises and classroom activities where it’s vital to quickly identify that weapons are safe at all times. Blocks the chamber to ensure that a round cannot be loaded when the flag is installed. Completely seals the ejection port to keep out dust, dirt, and other debris. Mfg: Brownells SPECS: Plastic, yellow.

more >>
Brownells
$9.99 See It
Ar-15/M16 Oversized Engraved Magazine Release - Mag Release, American Flag

Extended length, machined aluminum button has an oversized contact pad for fast, easy operation under stress. Comes laser etched with a distinctive logo that reflects your personality and dresses up your rifle. Drop-in replacement for the original release; uses the factory magazine release spring. Logos will not fade or wear off. Available with patriotic American Flag, aggressive death’s-head Punisher logo, international Biohazard symbol, or “Infidel” logo. Mfg: Tactical Supply Depot SPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5/8" (1.6cm) long, with 5/8" diameter pad. Fits AR-15/M16 with mil-spec magazine release.

more >>
Brownells
$19.99 See It
Ar-15 80% Lower Receiver - 80% Ar-15 Lower Receiver

These 80% AR-15 Lower receivers start as 7075-T6 forgings from the lead forge in the US and are fully machined to mil-spec tolerances. The operations left to be completed are as follows/ fire control group, trigger pin, hammer pin, trigger slot and the safety selector hole. This is a not an FFL item. This is not a complete receiver and still requires machining to be done. Machining Jig Available Separately. Returns will not be accepted once the receiver is modified in any way. Mfg: Tactical Machining SPECS: 7075 T6 aluminum, in-the-white, no finish.

more >>
Brownells
$78.00 See It
Ar-15/M16 223 Wylde Match Barrels - 18'''' Rifle Spr Barrel

Precision-machined stainless steel barrels feature a .223 Wylde chamber that helps maximize the long-range performance of your AR-15 with both .223 Remington and 5.56x45mm NATO ammunition. With 6-groove, 1-7" button rifling for accuracy and M4-type feed ramps for reliable feeding, these barrels help you reach out to distant targets with issued or magazine-length ammunition. The 18" barrels offer the Special Purpose Rifle (SPR) profile designed to optimize accuracy out to 600 meters, and are available with Mid-Length or Rifle-Length gas systems. SDM barrel features a heavy, fluted profile under the handguards, for added strength and rigidity.  Threaded muzzle accepts a varie Mfg: White Oak Armament SPECS: Stainless steel, natural finish. .750" (1.9cm) O.D. at gas port. Barrel extension .999" (2.5cm) O.D. 6-groove, 1-7" rifling. Muzzle threads: ½"-28 tpi. 16" Carbine - 2 lbs. 2oz. (963g). 18" Mid-Length/Rifle - 2 lbs. 9oz. (1.1kg).SDM

more >>
Brownells
$269.99 See It
Ar-15 80% Lower Receiver

Anderson Manufacturing 80% Lower Receiver is forged from 7075-T6 aluminum, for a superior custom build.  80% receiver ships in the white, and requires completion by the user.   Operations left to be completed include fire control/trigger group milling, trigger pin, hammer pin, trigger slot, and the safety selector hole. This is not an FFL item and requires machining to complete. Returns will not be accepted once the receiver is modified in any way. Mfg: Anderson Manufacturing SPECS: Fits - AR-15 common components once completed.

more >>
Brownells
$45.00 See It
Ar-15 Stripped Lower Receiver - Stripped Ar-15 Lower Receiver -21%

Machined from a 7075 T6 aluminum forging to mil-spec dimensions, this lower is compatible with all standard AR-15 parts. Tight tolerances give exact fit. Accepts .250" takedown/pivot pin holes and .154" trigger and hammer pins. Features Safe and Fire safety markings. Mfg: Tactical Machining SPECS: T6 7075 aluminum, hardcoat anodized, matte black. 250 takedown/pivot pin holes. .154 trigger and hammer pins. FFL required for purchase.

more >>
Brownells
$94.99 $74.99 See It
Ar-15/M16 Oversized Engraved Magazine Release - Mag Release, Biohazard

Extended length, machined aluminum button has an oversized contact pad for fast, easy operation under stress. Comes laser etched with a distinctive logo that reflects your personality and dresses up your rifle. Drop-in replacement for the original release; uses the factory magazine release spring. Logos will not fade or wear off. Available with patriotic American Flag, aggressive death’s-head Punisher logo, international Biohazard symbol, or “Infidel” logo. Mfg: Tactical Supply Depot SPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5/8" (1.6cm) long, with 5/8" diameter pad. Fits AR-15/M16 with mil-spec magazine release.

more >>
Brownells
$19.99 See It
Ar-15 Upper & Lower Receiver Set - Custom Upper/Lower Combo - Skulls

Matched flattop upper and lower receiver have been machined from 7075 T6 aluminum billet to strict tolerances, so they accept internal parts for standard mil-spec AR-15 receivers. Integral triggerguard machined right into the lower and extra metal at stress points add exceptional strength and structural rigidity. Includes provisions for forward assist and ejection port cover, as well as engraved pictogram markings for safety position. Ceramic coating gives excellent wear and corrosion protection, while the unique skull-pattern graphic makes your rifle look unlike any other on the firing line! Mfg: Black Rain Ordnance Inc. SPECS: Machined 7075  T6 aluminum, ceramic coated, matte black-and-white skull pattern finish. .250" pivot/takedown pin holes. .154" hammer/trigger pin holes. No internal parts included. FFL required for purchase.

more >>
Brownells
$499.99 See It
Ar-15/M16/Ar-Style .308 Tactical Compensators - Fsc556 Compensator

Aggressive, scallop-type cuts deliver superior gas dispersion to help stabilize the muzzle during periods of sustained fire. Special internal blast chamber with side-facing ports helps reduce recoil with no adverse effect on gas system function. Also provides enough flash suppression to keep flash out of the shooter’s line of sight. Wrench flats directly over the internal threads ease installation. All models include a peel washer for precise indexing of the side ports. FSC556 fits rifles chambered in .223/5.56mm. TTO delivers the recoil-reduction and compensation of the FSC556 minus the flash suppression to give the competition shooter the shortest possible package. FSC30 fits rifl Mfg: Primary Weapons SPECS: Steel, black, matte finish. Includes washer. FSC556, TTO, and CQB556 models fit AR-15/M16/M4 and clones chambered in .223/5.56mm, with ½”-28 tpi RH muzzle threads. FSC556 – 21/8” (5.4cm) long x 7/8” (2.2cm) diameter. 2.2 oz. (62g) wt. TTO –

more >>
Brownells
$94.95 See It
Ar-15/M16 M4 Upper Receiver

Complete upper fully assembled and ready to install on an AR-15/M16/M4 lower receiver Every component is carefully manufactured, finished, and tested to meet or exceed current military specifications to produces a reliable, smooth-functioning rifle M4-profile, 16" barrel is chambered for military 5.56 NATO ammo; cutout for grenade/tear gas/bean bag launcher Hard-chromed chamber and bore to resist corrosion Barrel is high-pressure tested and magnetic particle inspected to ensure strength and durability Extended M4 feed ramps for reliable feeding during rapid fire Receiver top and carrier are discretely laser-etched with Spike’s Tactic Mfg: Spikes Tactical SPECS: Receiver - 7075 T6 aluminum, hardcoat anodized, black. MIL-B-11595E chrome-moly-vanadium barrel, chrome lined, phosphate coated, black. Bolt/Carrier - 8620 steel, Parkerized, matte black. 1-7" twist. Chambered for 5.56mm NATO. Fits mil-spec lower receivers with .250" pivot/takedo

more >>
Brownells
$580.00 See It
Ar-15/M16 223 Wylde Match Barrels - 16'''' Mid-Length Carbine Barrel -11%

Precision-machined stainless steel barrels feature a .223 Wylde chamber that helps maximize the long-range performance of your AR-15 with both .223 Remington and 5.56x45mm NATO ammunition. With 6-groove, 1-7" button rifling for accuracy and M4-type feed ramps for reliable feeding, these barrels help you reach out to distant targets with issued or magazine-length ammunition. The 18" barrels offer the Special Purpose Rifle (SPR) profile designed to optimize accuracy out to 600 meters, and are available with Mid-Length or Rifle-Length gas systems. SDM barrel features a heavy, fluted profile under the handguards, for added strength and rigidity.  Threaded muzzle accepts a varie Mfg: White Oak Armament SPECS: Stainless steel, natural finish. .750" (1.9cm) O.D. at gas port. Barrel extension .999" (2.5cm) O.D. 6-groove, 1-7" rifling. Muzzle threads: ½"-28 tpi. 16" Carbine - 2 lbs. 2oz. (963g). 18" Mid-Length/Rifle - 2 lbs. 9oz. (1.1kg).SDM

more >>
Brownells
$269.99 $239.99 See It
Ar-15/M16/Ar-Style .308 Extended Pivot/Takedown Pins - Ar-15/M16 Extended P/T Pin Set, American Flag

Precision-machined aluminum pivot and takedown pins have easy-to-grasp, oversized heads with knurled edges to aid in fast pin removal for separation of receiver halves. Eliminates the need for a pin punch that can slip and scratch the receiver or get lost. Plus, the distinctive American Flag, Punisher, Biohazard, Infidel, or Jolly Roger logo gives your rifle a personalized, one-of-a-kind look. Also available in plain black, without logo. Pins lock into place as securely as factory pins. Mfg: Tactical Supply Depot SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Sold as a set with the same logo on both pins. AR-15/M16 pins fit mil-spec receivers with .250" (6.3mm) diameter pivot/takedown pin holes. AR-Style .308 pins fit DPMS LR-308 and Remington SR-25 rifles.

more >>
Brownells
$22.99 See It
Ar-15/M16 Gas Piston Conversion Kit - Rifle Gas Piston Kit

Drop-in gas piston conversion kit installs in only five minutes and improves the reliability and function of your AR-15 by eliminating fouling caused by gas venting into the receiver. Rifle runs cooler, with less frequent need for cleaning and less wear on carrier and bolt - resulting in longer service life from these critical parts. The unique, kidney-shaped cross-section of the piston and piston chamber provides extra mass and surface area to evenly spread out gas pressure and reduce felt recoil, allowing you to stay on target for rapid follow-up shots. Installs in minutes on both semi- or full-auto/burst rifles with a barrel O.D. of .875" or less. No need to remove gas block/sight Mfg: Osprey Defense SPECS: Steel, black oxide finish. Handguard – Reinforced polymer composite, black. Kit includes preassembled piston assembly, bolt carrier, handguard, and instructions. Carbine fits 11½" to 16" barrels with .875" O.D. or smaller, and carbine-length gas system. Rifle fi

more >>
Brownells
$299.99 See It
Ar-15 Lower Gunbuilder's Lower Parts Kit - Ar-15 Gunbuilder's Lower Parts Kit

CMMG Lower Parts Gunbuilder's Kits contain the needed parts to complete an AR-15 lower receiver.  These kits come less the trigger, grip and trigger guard. Parts list includes: Takedown pin, receiver pivot pin, takedown pin detent (2), takedown pin detent spring (2), hammer and trigger pin (2), safety selector, selector detent, magazine catch, magazine catch spring, magazine release button, bolt catch, bolt catch plunger, bolt catch spring, bolt catch spring pin, buffer retainer and buffer retainer spring. Mfg: Cmmg

more >>
Brownells
$46.99 See It
Ar-15/M16/Ar-Style .308 Tactical Compensators - Fsc30 5/8-24 308 Compensator

Aggressive, scallop-type cuts deliver superior gas dispersion to help stabilize the muzzle during periods of sustained fire. Special internal blast chamber with side-facing ports helps reduce recoil with no adverse effect on gas system function. Also provides enough flash suppression to keep flash out of the shooter’s line of sight. Wrench flats directly over the internal threads ease installation. All models include a peel washer for precise indexing of the side ports. FSC556 fits rifles chambered in .223/5.56mm. TTO delivers the recoil-reduction and compensation of the FSC556 minus the flash suppression to give the competition shooter the shortest possible package. FSC30 fits rifl Mfg: Primary Weapons SPECS: Steel, black, matte finish. Includes washer. FSC556, TTO, and CQB556 models fit AR-15/M16/M4 and clones chambered in .223/5.56mm, with ½”-28 tpi RH muzzle threads. FSC556 – 21/8” (5.4cm) long x 7/8” (2.2cm) diameter. 2.2 oz. (62g) wt. TTO –

more >>
Brownells
$94.95 See It
Search within results
  • Find by Price
    • $ to $