1 to 1 of  1 products for ar15 monsterman grip ar15 monsterman grip

Result for "ar15 monsterman grip ar15 monsterman grip"
Ar-15 Monsterman Grip

Replaces the pistol grip to make an AR-15 fitting with an A2-type, non-adjustable buttstock meet the requirements of California Penal Code 12276.1(a)(1)(A). Gives the rifle a "sporter" look and feel. Rounded edges and aggressive surface texturing give your hand a comfortable yet secure grasp. Uses existing grip screw. Mfg: Monsterman Grips SPECS: Molded polymer, black. 61/8" (15.6cm) long, 11/8" (2.9cm) wide, 45/32" (10.6cm) high. 4.6 oz. (130g) wt. Fits AR-15 with an A2 buttstock installed. Laws and regulations can change at any time; the user is responsible for making sure his rifle stays compliant.

more >>
Brownells
$44.99 See It
Additional items that match your search
Ar-15/Ar-Style Machined Lower Receiver - P-415 Ar-15 .223 Lower Receiver, Teflon -18%

Stripped, semi-auto lower receiver is fully machined from U.S.-sourced 7075 T6 aluminum billet for superb strength and precise dimensions. Extra metal in the right places gives a big payoff in added support and rigidity with minimal extra weight. Available in AR-15 and AR-style .308 sizes, both models accept mil-spec and aftermarket components, so you can select the upper, trigger group, pistol grip, receiver extension, and buttstock that best serve your needs—the perfect foundation for a custom tactical rifle. Integral, oversized triggerguard machined as part of the receiver further enhances structural rigidity and provides plenty of clearance for trigger finger when wearing gloves Mfg: Patriot Ordnance Factory SPECS: 7075 T6 aluminum, hardcoat anodized. Small-pin, .154" (3.9mm) hammer/trigger pin holes. P-415 - Available with matte black Teflon finish or matte medium gray NP3 finish. Accepts mil-spec AR-15/M16 rifle or carbine upper receiver and internal components. .250" (6.3mm) pivot/takedo

more >>
Brownells
$339.99 $279.99 See It
Ar-15/M16 Never Quit Grip - Never Quit Grip, Black

Ergonomically shaped rubber grip enhancer helps promote a secure, comfortable, non-slip grip for the tactical shooter who prefers to position his support hand on the magazine well. Encourages the operator to maintain a firm grasp on the magwell, not the magazine, for improved recoil control and fast followup shots. Oil, dirt, and UV-resistant Santoprene™ thermoplastic elastomer is textured to fit the hand and cushion it from recoil. The surface is just “grippy” enough for a secure hand-hold and to keep the grip from moving on the magwell. Installs easily on any AR-15/M16 rifle or carbine with a standard triggerguard. Just depress the forward pin, swing the guard out of t Mfg: Ergo Grips SPECS: Santoprene synthetic rubber, black.Fits AR-15/M16/M4 and clones with removable triggerguard.

more >>
Brownells
$23.99 See It
Ar-15/M16 Moe+ Grip - Moe + Grip, O.D. Green

Same contours and hard-molded polymer construction as the original MOE Grip. Durable, economical, easy-to-install replacement for factory pistol grip that gives the shooter a solid, secure grasp. Rigid, fully supported one-piece construction from the same reinforced, high-impact polymer as the MIAD grip, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap. Curved beavertail similar to the MIAD B2 insert fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of your hand during sustained firing.The MOE+ Grip has the addition of an anti-slip overmolded rubber coating for enhanced weapon control in wet conditions o Mfg: Magpul SPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, and Foliage Green. Fits standard mil-spec AR-15/M16 lower receiver. Also fits most AR-style .308 rifles that accept AR-15/M16 grip. Mounting hardware included.

more >>
Brownells
$22.75 See It
Ar-15 .22 Lr Conversion Kits - 22lr Ar15 Conversion Kit Echo

Drop-in .22 LR conversion system comes fully assembled and ready to install in any semi-auto AR-15 to help you practice critical shooting skills with economical rimfire ammunition. Concentrate on improving grip, sight alignment, trigger pull, and other skills without burning up expensive centerfire ammo. Simply replace the bolt and carrier with the conversion unit, load up the included magazine with high-velocity round-nose .22 LR ammo, and you’re ready to shoot. Precision machined from high-grade carbon or stainless steel for reliable function in any mil-spec AR-15 rifle or carbine chambered in 5.56mm NATO, including many gas piston systems.  Bravo kit consists of a stainless Mfg: Cmmg SPECS: Bravo kit consists of a stainless steel bolt group, with a brass extension bushing and your choice of a 10-round or 25-round magazine. The Bravo kit is also available with 3 25 round magazines.  Echo kit includes a stainless steel bolt group, brass extension bushing, 10-round or 25-ro

more >>
Brownells
$279.99 See It
Ar-15/M16/Ar-Style .308 Trx Battlerail Handguards - Trx Alpha Rail, 11''''

Machined aluminum free-float handguard employs a unique barrel nut and rotary-locking system to ensure proper alignment of top rail with receiver rail. Handguard slides over barrel and gas tube at an offset angle, until the notched barrel nut indexes in the internal grooved channel for a secure fit. Two hex head screws lock down the handguard, and a built-in stop prevents over tightening. Vent holes let heat escape the barrel and minimize weight. White alpha-numeric designators on the cross-slots ensure easy repeatability of accessory positions.  Streamlined Extreme and Alpha models have a single, top Picatinny rail, deep horizontal grooves for a secure no-slip grip, and additional v Mfg: Troy Industries, Inc. SPECS: Machined 6061 T6 aluminum, hardcoat anodized, Teflon® coated, matte black finish. Each model available lengths listed below. Mounting hardware and instructions included. Alpha fits AR-15/M16 rifles and carbines and attaches to the factory barrel nut. TRX-308 Extreme fits DPMS LR-308, R

more >>
Brownells
$179.99 See It
Ar-15/M16 60rd 223/5.56 Magazine - Surefire 60-Rd Magazine

Ultra-high capacity magazines keep your rifle running longer between mag changes during competition or tactical operations. These magazines meet NATO STANAG 4179 specifications and are compatible with all rifles that accept AR-15/M16/M4 magazines. Less than two standard magazines wide, so they’re easy to hold and handle with one hand. 60-round model fits most dual-mag pouches for 30-round magazines. Weight is centered under the weapon to help you maintain a normal shooting grip and stance. Seats fully loaded on a closed bolt. “Nestingâ€� nylon followers require no lubrication and fully support the round stack to aid in reliable feeding. Cadmium coating on springs reduces friction and resists c Mfg: Surefire SPECS: Aluminum body, hardcoat anodized, matte gray finish. Nylon followers. Cadmium-coated springs. 60-Rd – 8.7" (22.1cm) tall, 1.66" (4.2cm) wide at base. 6.4 oz. (181g) wt. empty, 2 lbs. (907g) wt. fully loaded. 100-Rd – 12.2" (31cm) tall, 1.66" wide at base. 9.6 o

more >>
Brownells
$110.00 See It
Ar-15/M16 Ergonomic Pistol Grip - Ergonomic Pistol Grip

Drop-in replacement for factory pistol grip has sculpted, ergonomic contours designed to provide an exceptionally comfortable, secure grip that minimizes hand fatigue, enhances trigger control, and improves weapon handling during sustained rapid fire. Also helps reduce hand fatigue during long periods in the ready position. A wide, hand-filling palm swell and gently curved finger grooves provide plenty of support, while molded-in stippling and vertical grooves on the backstrap help you maintain a firm grip with wet hands. Sweeping, integral beavertail allows a high hand position for outstanding recoil control. Positive-locking trapdoor in the bottom opens to reveal a roomy internal storage c Mfg: The Mako Group SPECS: Reinforced molded polymer composite, black. Fits rifles and carbines that accept standard AR-15/M16 pistol grips.

more >>
Brownells
$26.99 See It
Ar-15/M16 Moe-K2 Grip - Ar-15/M4 Moe-K2 Grip, Fde

Slimmed-down version of the original MOE grip for shooters with smaller hands or those who simply prefer a slimmer grip profile. Fits most AR-15/M16 type rifles, including AR-style .308s that use a standard AR-15 pistol grip. Narrower and shorter front to back than the original MOE or the standard A2 grip, the MOE-K is designed specifically for personal defense weapons and their operators by adding more vertical grip angle that brings the primary hand closer to the shooter’s body, thus improving control and retention. Mfg: Magpul SPECS: Reinforced molded polymer, Black, Flat Dark Earth, O.D. Green, Dark Earth or Gray. Fits standard mil-spec AR-15/M16 lower receiver. Also fits most AR-style .308 rifles that accept AR-15/M16 grip. Mounting hardware included.

more >>
Brownells
$19.90 See It
Ar-15/M16/Ar-Style .308 Trx Battlerail Handguards - Trx Alpha Rail W/ Sight, 13'''' -37%

Machined aluminum free-float handguard employs a unique barrel nut and rotary-locking system to ensure proper alignment of top rail with receiver rail. Handguard slides over barrel and gas tube at an offset angle, until the notched barrel nut indexes in the internal grooved channel for a secure fit. Two hex head screws lock down the handguard, and a built-in stop prevents over tightening. Vent holes let heat escape the barrel and minimize weight. White alpha-numeric designators on the cross-slots ensure easy repeatability of accessory positions.  Streamlined Extreme and Alpha models have a single, top Picatinny rail, deep horizontal grooves for a secure no-slip grip, and additional v Mfg: Troy Industries, Inc. SPECS: Machined 6061 T6 aluminum, hardcoat anodized, Teflon® coated, matte black finish. Each model available lengths listed below. Mounting hardware and instructions included. Alpha fits AR-15/M16 rifles and carbines and attaches to the factory barrel nut. TRX-308 Extreme fits DPMS LR-308, R

more >>
Brownells
$269.99 $169.99 See It
Shotgun Ar-15 Stock Conversion - Moss. Conv. Unit W/M4 Stock

Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate, tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump, and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket receiver extension tube, buttstock, and pistol grip. M4 includes collapsible stock and pistol grip. Mfg: Cavalry Manufacturing, Llc. SPECS: Conversion Unit - Aluminum, anodized, black, matte finish. Approximately 3.7" (9.4cm) high, 3.4" (8.6cm) long, 1" (2.54cm) thick. Rail - Aluminum, anodized, black, matte finish. 7" (17.8cm) long, .64" (16.2mm) wide, .64" high. M4 Stock - 11½" (28.6cm)

more >>
Brownells
$299.99 See It
Ar-15/M16/Ar-Style .308 Trx Battlerail Handguards - Trx Alpha Rail W/ Sight, 11'''' -35%

Machined aluminum free-float handguard employs a unique barrel nut and rotary-locking system to ensure proper alignment of top rail with receiver rail. Handguard slides over barrel and gas tube at an offset angle, until the notched barrel nut indexes in the internal grooved channel for a secure fit. Two hex head screws lock down the handguard, and a built-in stop prevents over tightening. Vent holes let heat escape the barrel and minimize weight. White alpha-numeric designators on the cross-slots ensure easy repeatability of accessory positions.  Streamlined Extreme and Alpha models have a single, top Picatinny rail, deep horizontal grooves for a secure no-slip grip, and additional v Mfg: Troy Industries, Inc. SPECS: Machined 6061 T6 aluminum, hardcoat anodized, Teflon® coated, matte black finish. Each model available lengths listed below. Mounting hardware and instructions included. Alpha fits AR-15/M16 rifles and carbines and attaches to the factory barrel nut. TRX-308 Extreme fits DPMS LR-308, R

more >>
Brownells
$259.99 $169.99 See It
Ar-15/Ar-Style Machined Lower Receiver - P-308 Ar-Style .308 Lower Receiver -11%

Stripped, semi-auto lower receiver is fully machined from U.S.-sourced 7075 T6 aluminum billet for superb strength and precise dimensions. Extra metal in the right places gives a big payoff in added support and rigidity with minimal extra weight. Available in AR-15 and AR-style .308 sizes, both models accept mil-spec and aftermarket components, so you can select the upper, trigger group, pistol grip, receiver extension, and buttstock that best serve your needs—the perfect foundation for a custom tactical rifle. Integral, oversized triggerguard machined as part of the receiver further enhances structural rigidity and provides plenty of clearance for trigger finger when wearing gloves Mfg: Patriot Ordnance Factory SPECS: 7075 T6 aluminum, hardcoat anodized. Small-pin, .154" (3.9mm) hammer/trigger pin holes. P-415 - Available with matte black Teflon finish or matte medium gray NP3 finish. Accepts mil-spec AR-15/M16 rifle or carbine upper receiver and internal components. .250" (6.3mm) pivot/takedo

more >>
Brownells
$449.99 $399.99 See It
Ar-15/M16 Universal Mounting Platform - Falcon Handguard Rail, 2''''

Lightweight, aluminum mount attaches to AR-15 handguards; gives quick, sturdy mounting for lights, forward grips, bipods and tripods. Fits standard, round, plastic, AR-15 and CAR-15 handguards without removing the heat shield. Requires removal of heat shield to fit M4 handguards. Can be attached to top or bottom handguard. Accepts Weaver-style accessories. 4" w/adapter permits use with 2" diameter aluminum float tubes, also fits standard handguard. Mfg: Ergo Grips SPECS: Aluminum, anodized, black. 2", (5cm), 4" (10.1 cm) and 6" (15.2cm) long. Includes mounting bolts and hardware. 4" w/adapter and 6" Platform also include low profile rail covers.

more >>
Brownells
$13.99 See It
Ar-15 Lower Receivers - Fully Assembled A2 Lower

Building your own tack driving AR-15 from the ground up has never been easier. High strength, hammer forged receiver is CNC precision machined and hard coat anodized black for a long lasting, durable finish. Extra reinforcement around the front pivot pin, reinforcing ridge over the buffer tube area and a full fence around the magazine catch button ensure that these lowers are built for a lifetime of heavy-duty use. Includes a radiused metal trigger guard and magazine catch button. Safe and fire is engraved on both sides for guns with ambi safeties.   Fully Assembled MIL/SPEC Lowers include a mil-spec trigger group and pistol grip and features an injection molded, synthet Mfg: Double Star SPECS: 7075-T6 forged aluminum, CNC machined to Mil-Spec. Hard coat anodized, Teflon coating, matte black. FFL required to purchase.

more >>
Brownells
$294.99 See It
Ar-15/M16/Ar-Style .308 Trx Battlerail Handguards - Trx Alpha Rail, 15'''' -25%

Machined aluminum free-float handguard employs a unique barrel nut and rotary-locking system to ensure proper alignment of top rail with receiver rail. Handguard slides over barrel and gas tube at an offset angle, until the notched barrel nut indexes in the internal grooved channel for a secure fit. Two hex head screws lock down the handguard, and a built-in stop prevents over tightening. Vent holes let heat escape the barrel and minimize weight. White alpha-numeric designators on the cross-slots ensure easy repeatability of accessory positions.  Streamlined Extreme and Alpha models have a single, top Picatinny rail, deep horizontal grooves for a secure no-slip grip, and additional v Mfg: Troy Industries, Inc. SPECS: Machined 6061 T6 aluminum, hardcoat anodized, Teflon® coated, matte black finish. Each model available lengths listed below. Mounting hardware and instructions included. Alpha fits AR-15/M16 rifles and carbines and attaches to the factory barrel nut. TRX-308 Extreme fits DPMS LR-308, R

more >>
Brownells
$199.99 $149.99 See It
Ar-15/M16 100rd 223/5.56 Magazine - Surefire 100-Rd Magazine

Ultra-high capacity magazines keep your rifle running longer between mag changes during competition or tactical operations. These magazines meet NATO STANAG 4179 specifications and are compatible with all rifles that accept AR-15/M16/M4 magazines. Less than two standard magazines wide, so they’re easy to hold and handle with one hand. 60-round model fits most dual-mag pouches for 30-round magazines. Weight is centered under the weapon to help you maintain a normal shooting grip and stance. Seats fully loaded on a closed bolt. “Nestingâ€Â� nylon followers require no lubrication and fully support the round stack to aid in reliable feeding. Cad Mfg: Surefire

more >>
Brownells
$179.10 See It
AR-15 Scorpion Recoil Pistol Grip -10%

The ATI AR-15 Scorpion Recoil Pistol Grip features a material that absorbs the initial shock wave which is the felt punch of the recoil. It increases the shooter s comfort while reducing the muzzle lift. It has a sure-grip texture, DuPont extreme

more >>
Kmart
$34.99 $31.49 See It
Tactical Case with Three AR-15 Magazines (BLKHAWK TAC CASE/MAG) -11%

The next time you head to the range, take along the BLACKHAWK! Tactical Rifle Case with AR-15 Magazines. The durable Sportster Tactical Rifle Case is constructed of tough, tight-weave, heavy-duty 600-denier polyester with a thick PVC laminate for

more >>
Cabelas
$89.99 $79.99 See It
Ar-15/M16 B.A.D. Lever™ - Magpul B.A.D. Lever

The Magpul Battery Assist Device (B.A.D.) is an extended bolt release that allows the shooter to keep his hand in the ready position on the pistol grip and operate the bolt catch with the trigger finger. Streamlines bolt catch manipulation to get the weapon into battery more quickly for improved operator readiness and weapon handling efficiency. Easy to install and remove—no weapon disassembly required. The B.A.D. lever clamps securely to the factory bolt release with a Torx® head screw and extends a paddle through the front of the triggerguard to the right-hand side of the weapon. Trigger finger can stay outside the triggerguard as you operate the lever, and factory bolt catch ret Mfg: Magpul SPECS: Aluminum, hardcoat anodized, matte black. Torx wrench and installation instructions included. Fits mil-spec AR-15/M16 receiver with factory bolt release lever.

more >>
Brownells
$28.45 See It
Search within results
  • Find by Price
    • $ to $
  • Category
  • Shop