1 to 7 of  7 products for ar15 stainless steel bolt carrier stainless steel bolt carrier

Result for "ar15 stainless steel bolt carrier stainless steel bolt carrier"
Ar-15/Ar Style 308 Low Mass Bolt Carriers - Jpbc-3 Low Mass Bolt Carrier

Lightweight, stainless steel bolt carrier has significantly lower reciprocating mass than a standard mil-spec carrier for softer recoil impulse on competition rifles. Helps limit felt recoil to get you back on target for fast follow-up shots. Lightening cuts reduce weight without sacrificing strength, and the forward assist serrations have been omitted for competition use. Extra-wide carrier rails have extra bearing surface to improve bolt alignment and reduce wear. Comes with carrier key installed and staked, and features a dust cover notch. For best performance and to minimize impact wear, use only in rifles with J.P. Low-Mass Recoil Buffer, Speed Hammer, and Reduced-Power Spring Kit, all Mfg: J P Enterprises SPECS: 416 stainless steel, polished, black QPQ finish. Recommended for competition rifles only.

more >>
Brownells
$214.99 See It
Ar15 Enhanced Firing Pin - Enhanced Ar15 Firing Pin

Features: Stainless steel construction Black Nitride processing Engineered to last a lifetime Fits any standard AR15 or M16 Mfg: Rubber City Armory Fits AR15/M16 bolt carrier groups. Black Nitride finish.

more >>
Brownells
$14.99 See It
Ar-15 Stainless Bolt/Carrier Sets - Jpbc-3a Low-Mass Bolt & Carrier

Precision-machined, stainless bolt-and-carrier group features JP s enhanced bolt made of high-grade 9310 steel for a significantly longer life expectancy than standard mil-spec bolts. Set is available with choice of a JPBC-3A, JPBC-3SPA, JPBC-2A-6.5G, and JPBC-3A-6.5G Low Mass carriers that reduce felt recoil and increase bolt speeds slightly for enhanced rapid fire handling, or the standard JPBC-2A and JPBC-2A-6.5G Full Mass carriers that replicates the normal carrier weight and is preferred for duty rifles or any time absolute reliability is required. Standard weight carrier features a 100% increase in bearing surface for smoother cycling and reduced wear on the inside of the rece Mfg: J P Enterprises

more >>
Brownells
$351.99 See It
Ar-15 Stainless Bolt/Carrier Sets - Jpbc-2a 6.5 Grendel Full Mass Bolt & Carrier

Precision-machined, stainless bolt-and-carrier group features JP s enhanced bolt made of high-grade 9310 steel for a significantly longer life expectancy than standard mil-spec bolts. Set is available with choice of a JPBC-3A, JPBC-3SPA, JPBC-2A-6.5G, and JPBC-3A-6.5G Low Mass carriers that reduce felt recoil and increase bolt speeds slightly for enhanced rapid fire handling, or the standard JPBC-2A and JPBC-2A-6.5G Full Mass carriers that replicates the normal carrier weight and is preferred for duty rifles or any time absolute reliability is required. Standard weight carrier features a 100% increase in bearing surface for smoother cycling and reduced wear on the inside of the rece Mfg: J P Enterprises

more >>
Brownells
$351.99 See It
Ar-15 Stainless Bolt/Carrier Sets - Jpbc-3a 6.5 Grendel Low Mass Bolt & Carrier

Precision-machined, stainless bolt-and-carrier group features JP s enhanced bolt made of high-grade 9310 steel for a significantly longer life expectancy than standard mil-spec bolts. Set is available with choice of a JPBC-3A, JPBC-3SPA, JPBC-2A-6.5G, and JPBC-3A-6.5G Low Mass carriers that reduce felt recoil and increase bolt speeds slightly for enhanced rapid fire handling, or the standard JPBC-2A and JPBC-2A-6.5G Full Mass carriers that replicates the normal carrier weight and is preferred for duty rifles or any time absolute reliability is required. Standard weight carrier features a 100% increase in bearing surface for smoother cycling and reduced wear on the inside of the rece Mfg: J P Enterprises

more >>
Brownells
$351.99 See It
Ar-15 Stainless Bolt/Carrier Sets - Jpbc-3spa 6.5 Grendel Low Mass Bolt & Carrier, Polished

Precision-machined, stainless bolt-and-carrier group features JP s enhanced bolt made of high-grade 9310 steel for a significantly longer life expectancy than standard mil-spec bolts. Set is available with choice of a JPBC-3A, JPBC-3SPA, JPBC-2A-6.5G, and JPBC-3A-6.5G Low Mass carriers that reduce felt recoil and increase bolt speeds slightly for enhanced rapid fire handling, or the standard JPBC-2A and JPBC-2A-6.5G Full Mass carriers that replicates the normal carrier weight and is preferred for duty rifles or any time absolute reliability is required. Standard weight carrier features a 100% increase in bearing surface for smoother cycling and reduced wear on the inside of the rece Mfg: J P Enterprises

more >>
Brownells
$351.99 See It
Ar-15/M16 Bolt Carriers - Ar-15 Bolt Carrier -16%

Stripped bolt carriers Available as semi-auto AR15 or full-auto M16 carrier Ready for installation of gas key and bolt components Matte black phosphate finish Chrome lined interior Machined from 8620 steel Shrouded firing pin Mfg: Brownells SPECS: Stripped, matte black finish, AR15 or M16 style.

more >>
Brownells
$44.99 $37.99 See It
Additional items that match your search
Ar-15/M16 Bolt Carriers - M16 Bolt Carrier -16%

Stripped bolt carriers Available as semi-auto AR15 or full-auto M16 carrier Ready for installation of gas key and bolt components Matte black phosphate finish Chrome lined interior Machined from 8620 steel Shrouded firing pin Mfg: Brownells SPECS: Stripped, matte black finish, AR15 or M16 style.

more >>
Brownells
$44.99 $37.99 See It
Ar-15/M16 Bolt Carrier Carbon Scraper - Bolt Carrier Carbon Scraper

Durable, tool steel scraper removes carbon buildup in AR15/M16 bolt carriers quickly and easily. Insert a section of your cleaning rod into the 7/32'''' hole to act as a T-Handle and turn; dual scraping edges clean in both directions. Compact design is a perfect fit for your range bag or buttstock storage compartment. Mfg: A&O Manufacturing SPECS: Tool steel, black, matte finish. 2¾'''' (7cm) long, ½'''' (12.7mm) wide, 3/16'''' (4.8mm) thick.

more >>
Brownells
$19.99 See It
Ar-15/M16 Bolt/Carrier Assembly - Bolt/Carrier Assembly

Complete bolt/carrier assembly comes ready to drop in your rifle ideal as a replacement, in a custom build, or as a backup for extra insurance during competition. Machined from high-grade 8620 carbon steel to mil-spec dimensions, with hard-chrome plated steel firing pin and chrome-lined, staked gas key for added durability. Carrier is notched for forward assist. Magnetic particle inspection (MPI) during manufacture ensures each component is solid and free of internal flaws.Available with a parkerized mil-spec finish or chrome plated Mfg: Double Star 8620 steel. Parkerized matte black or chrome plated.

more >>
Brownells
$129.99 See It
308ar Stripped Bolt Carrier - 308ar Stripped Carrier

Features: 308AR Stripped Bolt Carrier DPMS compatible Carrier is machined from 8620 steel Matte black, phosphate finish Chrome lined interior Ready for installation of gas key Accepts standard, AR15/M16 gas keys Mfg: Red X Arms Stripped 308AR bolt carrier.  Compatible with DPMS, LR-308 rifles.  8620 steel construction.  Matte black, phosphate finish.  Chrome lined interior.

more >>
Brownells
$99.99 See It
Ar-15 6.8mm Bolt Carrier Group - Bolt Carrier Assembly 6.8

Complete bolt carrier group for 6.8mm SPC rifles Includes gas key, cam pin, firing pin, firing pin retaining pin, and 6..8mm SPC bolt assembly Matte black phosphate finish Interior of bolt carrier is chrome lined AR15 semi-auto carrier Gas key screws are properly torqued and staked Mfg: Yankee Hill Machine Co., Inc. SPECS: Fits AR-15 6.8mm SPC rifles. Semi-auto carrier. Matte black phosphate finish.

more >>
Brownells
$199.99 See It
Ar-15/M16 Bolt/Carrier Completion Kit - Bolt/Carrier Completion Kit

Convenient kit contains the components you need to complete an AR-15 bolt and bolt carrier for installation in the rifle. Perfect for custom builds where bolt and carrier are obtained from different sources, and you need a firing pin, cam pin, and firing pin retaining pin to complete the assembly. Also a good idea to replace these critical parts when refurbishing existing rifles to help ensure reliability. Manufactured from high-quality steels, hardened as necessary, to mil-spec tolerances, and ready for installation. Installation instructions included. Mfg: Brownells SPECS: Firing Pin Steel, chrome finish. Cam Pin & Retaining Pin Steel, black oxide finish. Kit contains firing pin, firing pin retaining pin, cam pin, and instructions. Fits Colt-manufactured bolt carriers and clones.

more >>
Brownells
$19.99 See It
Ar-15 Bolt Carrier Assembly - Bolt Carrier Assembly

The easiest way to stock and sell genuine, mil-spec AR-15 parts, or use to assemble rifles on your receivers. Much lower in total cost than buying the parts one at a time. All kits listed contain only new, current-production, genuine, mil-spec parts; never pull-offs or direct-exchange surplus. Kit includes: bolt carrier, bolt, extractor, extractor spring, extractor pin, ejector, ejector spring, ejector pin, (3) gas rings, firing pin, firing pin retainer, cam pin, gas key and screws. Mfg: Dpms SPECS: Unassembled kits packaged in heat-sealed, poly bags, ­labeled for resale. Fits AR-15 only.

more >>
Brownells
$129.99 See It
Ar-15/M16 Bolt Carrier Groups - Ar15 Nib-X Bolt & Carrier Group

Each WMD bolt-and-carrier set is precisely machined from high-grade steel alloy to government M16 specs, then given WMD's proprietary NiB-X nickel boron coating that results in a super-smooth, harder-than-chrome surface. NiB-X reduces friction to the bare minimum and is impervious to corrosion and abrasion. The slick finish also keeps carbon from adhering, so clean up is much faster and easier than with standard parts. Ideal choice for 3-gun competitor sand other high-volume shooters. Available with a matching NiB-X coated hammer for the smoothest cycling. Also available as an AR15 or M16 Bolt Carrier Group. Mfg: Wmd Guns SPECS: Carrier 8620 carbon steel. Bolt Carpenter 158 steel alloy. Both have Nickel boron finish, silver. Extractor includes black buffer, black O-ring, and spring. Fits mil-spec AR-15/M16 upper receiver. AR15 or M16 carrier available.

more >>
Brownells
$225.00 See It
Ar-15/M16 Bolt Carrier Groups - M16 Nibx Bolt Carrier Group W/ Hammer

Each WMD bolt-and-carrier set is precisely machined from high-grade steel alloy to government M16 specs, then given WMD's proprietary NiB-X nickel boron coating that results in a super-smooth, harder-than-chrome surface. NiB-X reduces friction to the bare minimum and is impervious to corrosion and abrasion. The slick finish also keeps carbon from adhering, so clean up is much faster and easier than with standard parts. Ideal choice for 3-gun competitor sand other high-volume shooters. Available with a matching NiB-X coated hammer for the smoothest cycling. Also available as an AR15 or M16 Bolt Carrier Group. Mfg: Wmd Guns SPECS: Carrier 8620 carbon steel. Bolt Carpenter 158 steel alloy. Both have Nickel boron finish, silver. Extractor includes black buffer, black O-ring, and spring. Fits mil-spec AR-15/M16 upper receiver. AR15 or M16 carrier available.

more >>
Brownells
$240.00 See It
Ar-15/M16 Bolt Carrier Groups - Ar15 Nib-X Bolt & Carrier Group W/Hammer

Each WMD bolt-and-carrier set is precisely machined from high-grade steel alloy to government M16 specs, then given WMD's proprietary NiB-X nickel boron coating that results in a super-smooth, harder-than-chrome surface. NiB-X reduces friction to the bare minimum and is impervious to corrosion and abrasion. The slick finish also keeps carbon from adhering, so clean up is much faster and easier than with standard parts. Ideal choice for 3-gun competitor sand other high-volume shooters. Available with a matching NiB-X coated hammer for the smoothest cycling. Also available as an AR15 or M16 Bolt Carrier Group. Mfg: Wmd Guns SPECS: Carrier 8620 carbon steel. Bolt Carpenter 158 steel alloy. Both have Nickel boron finish, silver. Extractor includes black buffer, black O-ring, and spring. Fits mil-spec AR-15/M16 upper receiver. AR15 or M16 carrier available.

more >>
Brownells
$240.00 See It
Ar-15 Bolt/Carrier Group Exo-Treated Nickel Boron - Ar-15 Carrier, Only

Drop-in bolt and carrier group has a self-lubricating surface that eliminates the need to apply oil or grease that can attract dirt, dust, unburned powder, and carbon and lead to cycling failures. Proprietary EXO-treated Nickel Boron finish produces an exceptionally hard surface that s 40% more wear resistant than chrome plating, with an ultra-low friction coefficient. Surface is actually harder than the substrate underneath and will not peel, flake, gall, or rub off. EXO-treated Nickel Boron finish bolt/carrier groups have been tested to function reliably without additional lubrication up to 50,000 rounds. Reduced friction also means less heat generated by metal-on-metal contact, so t Mfg: Failzero.Com SPECS: Heat-hardened carbon steel, EXO-treated Nickel Boron finish. Fits mil-spec AR-15 upper receiver. Carrier does not have provision for auto sear trip.

more >>
Brownells
$124.99 See It
Ar-15/M16 Bolt Carrier Groups - Bolt Carrier Group, Chrome Ar-15

Complete, mil-spec assembly with bolt, bolt carrier, and firing pin ready to drop into the rifle or carbine upper of your choice. Features a shot-peened bolt for increased surface strength and durability, and an extractor booster to ensure reliable cycling during rapid semi-auto or full-auto fire. Each assembly is magnetic particle inspection tested to ensure it s free from imperfections that can lead to premature failures. Properly staked gas key prevents gas leakage that can lead to short stroking. M16-style carrier on the black phosphate model has full-length shroud for tripping auto sear, so this carrier may be installed on full-auto law enforcement and military rifles. Chrome B Mfg: Daniel Defense SPECS: Steel, black parkerized or chrome plated finish. Fits mil-spec semi-auto and full-auto AR-15/M16 upper receiver chambered for .223/5.56mm.

more >>
Brownells
$205.00 See It
Ar-15 Tactical Bolt Release

Large, serrated, thumb pads are easier to feel and activate in the dark. Extended lower pad gives your thumb positive purchase to quickly lock the bolt carrier to the rear. Easy, no-gunsmithing installation. Includes new roll pin. Mfg: Dpms SPECS: Steel, black, parkerized finish. Clears the mag release. 1-3/4'''' (4.4cm) long. 3/4'''' (19mm) wide.

more >>
Brownells
$8.99 See It
Search within results