1 to 1 of  1 products for ar15m16 a2 singlepoint sling adapter lh a2 singlepoint adapter

Result for "ar15m16 a2 singlepoint sling adapter lh a2 singlepoint adapter"
Ar-15/M16 A2 Single-Point Sling Adapter - Rh A2 Single-Point Adapter

Low-profile adapter gives an AR-15/M16 with an A2-style buttstock the convenience and versatility of single-point clip-on sling/mash-hook/H&K sling mounting attachment. Precision machined from 4140 carbon steel for extra strength, with extra metal on the attachment loop, so no matter how hard you pull or twist the sling, this adapter won’t break. Right Hand (RH) model has the loop on the left side to accommodate right-handed shooters; Left Hand (LH) model has the loop on the right for left-handed shooters. Requires no permanent alterations to rifle: simply remove the buttstock, slide the adapter over the receiver extension tube, and reinstall the stock using the includ Mfg: Brownells SPECS: 4140 steel, black oxide finish

more >>
Brownells
$39.99 See It
Additional items that match your search
Ar-15/M16 Single Attachment Sling Endplate - Sase-2e Enhanced Sase-2

Ambidextrous, all steel endplate provides secure, balanced single-point sling attachment, so your collapsible-stock rifle or carbine can be carried tangle-free in the ready position at all times. Special indexing washer with screw interfaces with the rear of the receiver to allow easy installation for right- or left-hand use. SASE-1 features a single slot that accepts conventional 1¼" wide webbing. SASE-2 has loop to accept HK-style hook or carabineer clips. The SASE-2E is an enhanced version of the SASE-2 featuring a larger loop to accommodate larger HK-style hooks Mfg: Vltor Weapon Systems SPECS: Steel, black, matte finish. 2-1/16" (5.2cm) long, 1-3/8" (3.5cm) wide, 1/8" (3mm) thick. .7 oz. (20g) wt. Fits AR-15/M16/M4 and clones with collapsible stock.

more >>
Brownells
$18.95 See It
Ar-15/M16 Single Attachment Sling Endplate - Sase-1 Slotted Endplate

Ambidextrous, all steel endplate provides secure, balanced single-point sling attachment, so your collapsible-stock rifle or carbine can be carried tangle-free in the ready position at all times. Special indexing washer with screw interfaces with the rear of the receiver to allow easy installation for right- or left-hand use. SASE-1 features a single slot that accepts conventional 1¼" wide webbing. SASE-2 has loop to accept HK-style hook or carabineer clips. The SASE-2E is an enhanced version of the SASE-2 featuring a larger loop to accommodate larger HK-style hooks Mfg: Vltor Weapon Systems SPECS: Steel, black, matte finish. 2-1/16" (5.2cm) long, 1-3/8" (3.5cm) wide, 1/8" (3mm) thick. .7 oz. (20g) wt. Fits AR-15/M16/M4 and clones with collapsible stock.

more >>
Brownells
$18.95 See It
Ar-15/M16 Ubr™ Quick-Detach Sling Swivel Mounts Type 2 Kit - Type 2 Qd Sling Mount

Heavy-duty steel receptacle supplements the two mounts that come with the stock to give your UBR stock maximum versatility in ambidextrous, quick-detach, pushbutton sling mounting. Bolts to any of the stock’s four mounting points and accepts most pushbutton, single-point sling swivels. Allows full 360° rotation of swivel for unrestricted sling travel. While both the UBR and STR come with reversible push-button QD swivel sockets pre-installed on the left side of the stock (UBR comes with two, one front and rear), the UBR/STR QD Swivel Sling Mount can be installed on the opposite side to add additional push-button sling swivels. Heavy-duty black phosphatized steel construction eas Mfg: Magpul SPECS: Steel, phosphate finish, matte black. ¾" (1.9cm) long. .

more >>
Brownells
$18.95 See It
Ar-15/M16 Sling Adapter End Plate - Ambi Sling Adapter Plate

Machined steel replacement for the factory receiver plate gives an AR fitted with an M4-type collapsible buttstock a convenient, low-profile attachment point for clip-on, single-point slings. Precision machined from 1018 carbon steel for superior strength and an exact fit, with a durable manganese phosphate Parkerized finish that resists surface abrasion and corrosion, and matches the finish on mil-spec anodized receivers. Available in single-loop Right-Hand (RH) as well as a convenient, versatile Ambi configuration that lets you swap the sling from one side of the receiver to the other. Mfg: Double Star SPECS: 1018 steel, Parkerized, matte black finish. Fits AR-15/M16/M4 and clones fitted with M4-style collapsible buttstock.

more >>
Brownells
$10.99 See It
Cross Tac Corp Car-15/M4 Ambi Single-Point Sling Connector - Single-Point Sling Adapter

Minimal profile sling adapter plate provides secure, ambidextrous attachment for single-point tactical slings on carbines or converted shotguns with M4 collapsible buttstocks. The attachment loop centers under the receiver extension nut, out of the way, where it can’t snag on clothing, gear, brush or the sling, and won’t interfere with access to the selector lever. Helps weapon hang flat against your body when released, yet also allows fast, positive re-grip when needed. Accepts most sling hooks, including MASH hooks, H&K connectors, and ZM-style clasps. Fits M4-type collapsible stocks with mil-spec and commercial buffer tubes, including shotgun conversions that use the M4 tu Mfg: Crosstac SPECS: Steel, black, matte, Parkerized finish.

more >>
Brownells
$29.99 See It
Ar-15/M16 Front Sling Adapters - Mctar-06 Swivel Mount Adapter

Two-piece clamp with single cross-bolt secures adapter to Picatinny/Weaver-style handguard rails so you have a front sling attachment point. MCTAR-06 has pivoting, 1¼" wide swivel for direct sling attachment. Rubber coating on swivel prevents noisy, metal-to-metal contact. MCTAR-07 includes a fixed, dome-shaped stud that accepts your own, standard quick-detach swivel. MCTAR-08 includes a 11/4" wide, 360º rotating, push-button swivel for rapid sling removal. MCTAR-08HD has heavy duty base and swivel that stands up to extreme tactical operations. 1¼" wide, quick-detach swivel limits travel to prevent sling wrapping yet allows necessary movement. MCTAR-08 Mfg: Midwest Industries, Inc. SPECS: Bases - 6061 aluminum, mil-spec hardcoat anodized, matte black; steel setscrew, matte black oxide. MCTAR-08HD - 7/8" (2.2cm) long x 13/16" (3cm) wide. MCTAR-08HDO - 2" (5cm) long x 1" (2.5cm) wide. Other models - 9/16" (1.4cm) long x 13/16&quo

more >>
Brownells
$31.99 See It
Ar-15/M16 Z-360 Gen 2 Sling Mount - Z-360 Gen 2 Sling Mount, Black

Polymer adapter adds an ambidextrous mounting point for a pushbutton QD sling at the back of the receiver on collapsible-stock rifles. Low profile design won't interfere with working the charging handle. Interlocking clamps offer secure fit on all buffer tubes - commercial, mil-spec, or out-of-spec. Stainless steel threads and swivel connection add strength. Designed to fit all known collapsible-stock models of the AR-15/M16/M4 rifles, including HK416. Mfg: Tactical Link SPECS: Reinforced, 350-lb. test polymer, Black or Dark Earth. 2” (5cm) high x 2” wide. 1.3 oz. (35g) wt.

more >>
Brownells
$54.95 See It
Ar-15/M16 Front Sling Adapters - Mctar-07 Stud Mount Adapter

Two-piece clamp with single cross-bolt secures adapter to Picatinny/Weaver-style handguard rails so you have a front sling attachment point. MCTAR-06 has pivoting, 1¼" wide swivel for direct sling attachment. Rubber coating on swivel prevents noisy, metal-to-metal contact. MCTAR-07 includes a fixed, dome-shaped stud that accepts your own, standard quick-detach swivel. MCTAR-08 includes a 11/4" wide, 360º rotating, push-button swivel for rapid sling removal. MCTAR-08HD has heavy duty base and swivel that stands up to extreme tactical operations. 1¼" wide, quick-detach swivel limits travel to prevent sling wrapping yet allows necessary movement. MCTAR-08 Mfg: Midwest Industries, Inc. SPECS: Bases - 6061 aluminum, mil-spec hardcoat anodized, matte black; steel setscrew, matte black oxide. MCTAR-08HD - 7/8" (2.2cm) long x 13/16" (3cm) wide. MCTAR-08HDO - 2" (5cm) long x 1" (2.5cm) wide. Other models - 9/16" (1.4cm) long x 13/16&quo

more >>
Brownells
$23.99 See It
Suppressor Adapters - P22/M&P22 Suppressor Adapter

P22/M&P22 SUPPRESSOR ADAPTER Precision made to ensure alignment and avoid dangerous baffle strikes This is all you need to convert your S&W M&P 22 pistol (works with either the long or short P22 models) to use standard 1/2-28 muzzle accessories and suppressors Threaded M8 x .75 to 1/2-28 to fit any S&W M&P 22 or Walther P22 with the factory threaded barrel Includes knurled Gemtech thread protectorSIG MOSQUITO SUPPRESSOR ADAPTER M9 x .75 to 1/2-28 for SIG mosquito factory threaded barrel Includes thread protectorGSG 1911 .22 LR SUPPRESSOR ADAPTER This adapter will allow you to mount most any suppressor or muzzle accessory us Mfg: Gemtech

more >>
Brownells
$45.00 See It
Ar-15/M16 9mm Magazine Well Adapter - 9mm Mag Adapter

Magazine well insert converts a standard .223/5.56 AR-15 lower receiver to accept Colt SMG and modified Uzi-type 9mm magazines for use with a dedicated 9mm upper receiver. Friction-fit, top-down installation with steel tabs that fit over the top of the lower receiver to keep the adapter in place. Durable polymer body with Parkerized steel fixtures for added support. Bolt hold-open after last shot with Colt magazines only. Mfg: Pro Mag SPECS: Polymer body, black. Steel feed ramp, bolt stop, ejector, Parkerized, matte black. Armorer installation recommended. Fits Mil-Spec AR-15/M16 lower receivers; Olympic arms rifles require ejector removal.

more >>
Brownells
$44.99 See It
Ar-15/M16 Professional-Grade Sling Adapter - Pro-Grade Sling Adapter, Black

Heavy-duty sling adapter slides over collapsible stock buffer tubes to provide secure, ambidextrous attachment for the push-button QD sling swivel. No gunsmithing required—simply tighten down the steel crossbolt with the included hex key wrench. Solid aluminum construction with plenty of extra metal at the stress points to ensure this mount won’t twist, flex, or bend under pressure. Beveled and rounded edges help resist snagging on sling or other gear. Indexes to upper receiver to prevent unwanted rotation of buffer tube. Hardcoat anodized for extra strength and wear resistance; available in matte black or dark earth. Stainless steel swivel has a non-reflective black finish and allows a full Mfg: Troy Industries, Inc. SPECS: Aluminum, hardcoat anodize, matte black or dark earth, with stainless steel sling swivel, matte black finish. Accepts slings up to 1¼� (3.2cm) wide.

more >>
Brownells
$48.99 See It
Suppressor Adapters - Gsg1911 .22lr Suppressor Adapter

P22/M&P22 SUPPRESSOR ADAPTER Precision made to ensure alignment and avoid dangerous baffle strikes This is all you need to convert your S&W M&P 22 pistol (works with either the long or short P22 models) to use standard 1/2-28 muzzle accessories and suppressors Threaded M8 x .75 to 1/2-28 to fit any S&W M&P 22 or Walther P22 with the factory threaded barrel Includes knurled Gemtech thread protectorSIG MOSQUITO SUPPRESSOR ADAPTER M9 x .75 to 1/2-28 for SIG mosquito factory threaded barrel Includes thread protectorGSG 1911 .22 LR SUPPRESSOR ADAPTER This adapter will allow you to mount most any suppressor or muzzle accessory us Mfg: Gemtech

more >>
Brownells
$45.00 See It
Upper Receiver W/.223 Cal, Ft, 16'''' Bull Barrel, Chrome - Upper Receiver W/5.56 Cal, A2, 16'''' Std Barrel, Parkerized

Complete, ready-to-install, semi-auto receivers let you change your AR-15 from a sporter to a match rifle or long-range varminter in just minutes—or add to a lower receiver to complete a parts gun. All barrels have six-groove, 1-9" right-hand twist rifling and M4-type feed ramp. Pre-ban style standard (Std) barrels are chambered for 5.56mm NATO, with A2 flash suppressor, military-style polymer handguard, and A2 front sight housing that includes bayonet lug and riveted sling loop. AP4 adds to Std configuration the cutout for M204 grenade launcher mount to replicate the contours of the USGI M4 carbine barrel. Bull barrels are stainless steel, post-ban style, and chambered f Mfg: Dpms SPECS: Receiver - aluminum, anodized and Teflon® coated, black. A2 carry handle with adjustable rear sight or Flat Top (FT) rail. Barrel - Std - 4140 steel, Parkerized finish, dark gray. .725" dia. at muzzle. AP4 - 4140 steel, Parkerized finish, dark gray. .725" dia. at muzzle. Bull

more >>
Brownells
$499.99 See It
Midwest Industries Ar-15 End Plate Sling Adapter - End Plate Sling Adapter

Ambidextrous, quick-detach sling swivel can be mounted on either side of the mounting plate on adjustable M4-type buttstocks so you can position your sling for optimum comfort and versatility. Hard coat anodized, 6061 aluminum body with a matte black finish holds up to the toughest use and won’t crack or break over years of shooting. Won’t interfere with the operation of stock and works well with single-point, two-point, or three-point tactical slings. Mfg: Midwest Industries, Inc. SPECS: 6061 aluminum, hard anodized, matte black. Fits 4- or 6-position collapsible stocks. No gunsmithing required.

more >>
Brownells
$42.99 See It
High Tube Telescoping Stock Kit and Rail Kit for Mossberg 500/590 (Adapter - mounted Rail)

Mesa Tactical High Tube Telescoping Stock Adapters and Kits. Add a bit of AR15 tactical toughness to your combat 12 - gauge! Take your pick of a Telescoping Stock Adapter, Telescoping Stock Kit, or Telescoping Recoil Stock Kit to outfit your Mossberg 500/590. Each is machined from cast aircraft aluminum and anodized with a Type III Class 2 mil-spec finish. High Tube systems are perfect for law enforcement and competitive shooting, and were designed to be used with rail-mounted optics. You even get a BONUS top-mount picatinny rail! Read on for the details.High Tube Telescoping Stock with Rail Kit: It's everything you need to turn your Mossberg 500/590, Remington 870, or Winchester 1200/1300 into an AR15-style tactical beast! You get the aircraft-grade telescoping adapter, grip, and stock, PLUS a picatinny rail and all necessary hardware and instructions.Kit includes:CNC machined aircraft aluminum AR adapter, with accessory mounting points that accept rails, shell carriers, and more Hogue overmolded grip USA-made 5-position M4 SOPMOD-style telescoping stock assembly Top-mount picatinny rail Sling swivel mount All necessary hardware and instructions. Customize your 12-ga. with top-notch accessories for LESS! Order ONLINE Today!

more >>
The Sportsman Guide
$294.99 See It
Ar-15/M16 5.56 Barrels - Ar-15/M16 16'''' 5.56 Hbar Barrel No-Chrome 1/2-28

DPMS AR15/M16 5.56x45mm Barrel Assemblies are ready for your next build. These barrels are machined from 4140 chrome moly steel, and feature a matte black phosphate finish. Barrels include front sight base installed (does not include front sight parts and sling swivel). Barrels are available in 11.5”, 14.5”, 16” and 20” lengths. Shorter barrels feature a carbine length gas system, while the 20” barrel features a rifle length gas system. Muzzle are threaded ½-28 and bore and select barrels are available with chrome bores.Barrels feature M4 feedramps. Includes barrel nut and handguard cap (231-000-361 does not include barrel nut or handguard cap). Mfg: Dpms SPECS: Muzzle diameter is .720 to threaded portion.

more >>
Brownells
$169.99 See It
High Tube Telescoping Stock Adapter and Rail Kit for Mossberg 500/590 (Adapter - mounted Rail)

Mesa Tactical High Tube Telescoping Stock Adapters and Kits. Add a bit of AR15 tactical toughness to your combat 12 - gauge! Take your pick of a Telescoping Stock Adapter, Telescoping Stock Kit, or Telescoping Recoil Stock Kit to outfit your Mossberg 500/590. Each is machined from cast aircraft aluminum and anodized with a Type III Class 2 mil-spec finish. High Tube systems are perfect for law enforcement and competitive shooting, and were designed to be used with rail-mounted optics. You even get a BONUS top-mount picatinny rail! Read on for the details. High Tube Telescoping Stock Adapter with Rail Kit: Aircraft-grade aluminum Adapter Kit includes everything necessary to retrofit your Mossberg 500/590 12-ga. with your AR15-style stock and pistol grip. The Stock Adapter replaces your Mossberg's stock, and mimics an AR15 lower receiver, providing a sturdy "base" so you can attach any pistol grip and stock you choose! As a bonus, you also get a top-mount picatinny rail. Stock / grip not included.Kit includes:CNC machined aircraft aluminum AR adapter, with accessory mounting points that accept rails, shell carriers, and more Top-mount picatinny rail Sling swivel mount All necessary hardware and instructions.Customize your 12-ga. with top-notch accessories for LESS! Order ONLINE Today!

more >>
The Sportsman Guide
$174.99 See It
Ar-15/M16 Front Sling Adapters - Mctar-08 Swivel Mount Adapter

Two-piece clamp with single cross-bolt secures adapter to Picatinny/Weaver-style handguard rails so you have a front sling attachment point. MCTAR-06 has pivoting, 1¼" wide swivel for direct sling attachment. Rubber coating on swivel prevents noisy, metal-to-metal contact. MCTAR-07 includes a fixed, dome-shaped stud that accepts your own, standard quick-detach swivel. MCTAR-08 includes a 11/4" wide, 360º rotating, push-button swivel for rapid sling removal. MCTAR-08HD has heavy duty base and swivel that stands up to extreme tactical operations. 1¼" wide, quick-detach swivel limits travel to prevent sling wrapping yet allows necessary movement. MCTAR-08 Mfg: Midwest Industries, Inc. SPECS: Bases - 6061 aluminum, mil-spec hardcoat anodized, matte black; steel setscrew, matte black oxide. MCTAR-08HD - 7/8" (2.2cm) long x 13/16" (3cm) wide. MCTAR-08HDO - 2" (5cm) long x 1" (2.5cm) wide. Other models - 9/16" (1.4cm) long x 13/16&quo

more >>
Brownells
$34.99 See It
Ar-15/M16 Front Sling Adapters - Mctar-08hd Heavy Duty Adapter

Two-piece clamp with single cross-bolt secures adapter to Picatinny/Weaver-style handguard rails so you have a front sling attachment point. MCTAR-06 has pivoting, 1¼" wide swivel for direct sling attachment. Rubber coating on swivel prevents noisy, metal-to-metal contact. MCTAR-07 includes a fixed, dome-shaped stud that accepts your own, standard quick-detach swivel. MCTAR-08 includes a 11/4" wide, 360º rotating, push-button swivel for rapid sling removal. MCTAR-08HD has heavy duty base and swivel that stands up to extreme tactical operations. 1¼" wide, quick-detach swivel limits travel to prevent sling wrapping yet allows necessary movement. MCTAR-08 Mfg: Midwest Industries, Inc. SPECS: Bases - 6061 aluminum, mil-spec hardcoat anodized, matte black; steel setscrew, matte black oxide. MCTAR-08HD - 7/8" (2.2cm) long x 13/16" (3cm) wide. MCTAR-08HDO - 2" (5cm) long x 1" (2.5cm) wide. Other models - 9/16" (1.4cm) long x 13/16&quo

more >>
Brownells
$42.99 See It
Search within results
  • Find by Price
    • $ to $
  • Category
  • Brands
  • Shop