AC Adapter - Limited Warranty: 1 Year - Device Supported: Notebook - Maximum Output Power: 90 W
Battery Power Adapter - Width: 9.2" - Height: 0.2" - Depth: 4.9" - Color: Gray - Form Factor: Portable
Battery Power Adapter - Width: 3.9" - Height: 0.7" - Depth: 2.8" - Color: Gray - Form Factor: Portable - Green Compliant: Green Compliant - Country of Origin: China
Cable Analyzer - Width: 2.3" - Height: 1" - Depth: 4"
Battery Power Adapter - Width: 7.8" - Height: 1" - Depth: 6.8" - Color: Black
AC Adapter - Limited Warranty: 1 Year - Width: 2.3" - Height: 5.7" - Depth: 0.8" - Green Compliant: Green Compliant - Green Compliance Certificate/Authority: WEEE - Country of Origin: Taiwan
AC Adapter - Device Supported: Camera - Output Voltage: 5 V DC
AC Adapter - Device Supported: Printer - Country of Origin: China
AC Adapter - Limited Warranty: 1 Year - Width: 5.0" - Height: 5.5" - Depth: 2.5" - Device Supported: Printer - Input Voltage: 110 V AC - Output Voltage: 9 V DC
AC Adapter - Limited Warranty: 1 Year - Device Supported: e-Book - Output Voltage: 5 V DC - Maximum Output Current: 1 A
Floral light base with 25 super bright LED's with it's special pattern for maximum light distribution. Battery operated uplight uses 3 AA batteries, will run for 12 hours. Floral light base is 1.25 inch high and 6.25 inches inches wide. Use to Up Light vases, flower arrangements, wedding centerpieces, water to beads or any translucent object. 25 LED's are Super Bright Uses 3 AA Batteries (not included) AC Adapter Included 6.25 Inch Wide x 1.25 Inch Tall This Floral up light uses bright white LED bulbs to transform your wedding, party or special event. The LED uplight is an illuminating base that will light any translucent design that is placed on top of it. Included is the matching 4.5V AC/DC wall adapter to power the light base without the need for batteries. The light base can also be power with 3AA batteries that fit in the bottom of the the base.
20 feet of Micro LED string lights with timer feature. 60 soft white LED micro lights on silver wire. 4 Inch bulb spacing. 6 hours on, 18 hours off. Uses 3 AA batteries or the included AC adapter! Batteries sold seperately. Comes with AC Adapter 3 Modes - Steady, Flash, Phase 60 Soft White Micro LED'S Timer Feature - 6 on - 18 Off 12 Inch Lead to Battery pack 20 Feet In Length 4 Inch Bulb Spacing 3 x AA Batteries Flexible Silver Wire Easy To Hold Shape Use in floral, topiary and holiday arrangements. Great for your outdoor potted evergreens. LED string lights can be used in water as well as out, just the battery pack needs to stay dry.
Guitar Pedals & Effects - Get your Zoom pedals up and running with the Zoom AD-16 AC adapter power supply. This handy adapter serves up 9v to a variety of Zoom pedals including the MS-50G, MS-100BT, G3, G2, A2, and the B2 series processors. Never have your batteries run out at a gig again, the AD-16 AC adapter plugs into the wall and gives you the perfect power feed to ensure your processor is running at 100%. Power up with the Zoom AD-16 AC adapter.Zoom AD-16 AC Adapter Features:Power your favorite Zoom processor with this AC adapterWorks with MS-50G, MS-100BT, G3, G2, A2, and the B2 processors9V output @ 500mA (center negative)Keep your pedal powered with the Zoom AD-16 AC adapter. Pedal & Effects Accessories
Rapid Fast Battery Quick Charger & Adapter Battery charger Adapter Universal Charger market. The Best ALL-IN-One Compact Universal Charger in the Market. Easy to read and use digital display makes charging any battery EXTREMELY simple. Buy this charger today and you will not regret it. Balances battery cells too. Various Connectors Supported: Hitech JST Deans Tamiya Traxxas No extra hassle of trying to find connector adapters, or worrying about if your Hobby battery pack is supported. Supports multiple types of battery packs with one single charger! The follow packs are supported: NiMH/NiCD 1 15 cells ( 1.2v to 18v) Li-PO/Lithium Ion 1 6 series ( 3.7v to 22.2v) Li-Fe 1 6 series Sealed Lead Acid (SLA) Charger Specifications: Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA Batteries Build-in Balance Temperature Sensor DC 11V 15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. Specification Operating voltage DC 11 18 volts AC 100 240V, 50/60Hz Charge/discharge power max. 50/5 Watts NiCd/MH 1 15 cells LiIo/LiPo/LiFe 1 6 series Pb 2 20V Charge current 0.1 to 5.0A Discharg current 0.1 to 1.0A No. of cycle 1 to 5 times Battery data memory up to 5 data Weight 1000g Dimension 160x120x40 mm User's setting-up parameters Battery voltage type LiIo:3.6V, LiPo:3.7V, LiFe:3.3V NiCd Delta-peak voltage sensitivity 1 to 20mV NiMH Delta-peak voltage sensitivity 1 to 20mV Battery temperature cut-off 20 to 80C or OFF Waiting time between charge/discharge 1 to 60 min. Integral timer limit for safety 10 to 720 min.or OFF Maximum charging capacity limit for safety 10 to 9990mAh or OFF Key beep and buzzer sound ON/OFF Input DC power low alert 10 to 11V Optimized operating software When charging or discharging, TB6 has an 'AUTO' function that sets the feeding current or the cell count of the battery automatically. Especially for Li-ion/Li-Polymer batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option. Dual input power TB6 employs the circuit that can be operated with the input power of AC(Alternating Current) or DC(Direct Current). For AC input, it contains a AC-DC switching power supplier which has 5A of power capacity and maximum output power of 50Watts for charging. As a result it can charge up to 16 cells of NiCd/NiMH and 6 series of Li-ion/Li-Polymer batteries with maximum current of 5.0A. Individual voltage balancer for Li-ion/Li-Polymer batteries inside TB6 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Li-ion/Li-Polymer batteries (LiIo/LiPo/LiFe) for cell voltage balancing. Balance individual cells on discharge TB6 also can monitor and balance individual cells of the b
Cable Analyzer - Width: 2.8" - Height: 3.9" - Depth: 1.7" - Battery Chemistry: Nickel Metal Hydride (NiMH) - Battery Rechargeable: Battery Rechargeable - Number of Batteries Supported: 1
Buy Olympus A513, its a 4.8V high power AC Adapter needed to recharge the Ni-MH battery pack (BR403) and some of the Olympus Recorders.
AC Adapter - Device Supported: Digital Camera
AC Adapter - Limited Warranty: 1 Year - Device Supported: Digital Camera - Output Voltage: 8.4 V DC - Maximum Output Current: 1.20 A
AC Adapter - Device Supported: Digital Camera - Input Voltage: 110 V AC - Output Voltage: 5 V DC
ac adapter/charger with ac/dc cables for panasonic digital camcorders using batteries vw-vbg130 and vw-vbg260 kit includes: charger de-a35ba ac power cord with plug, 125v dc cable with plug, 300v