1 to 20 of  100 products for blackhawk knoxx specialops adjustable camo shotgun stock rem 870 moss 12 gauge

No exact matches found for blackhawk knoxx specialops adjustable camo shotgun stock rem 870 moss 12 gauge

100 similar items found

Overmolded Shotgun Stock & Forend Sets - Rem. 870 Stock/Forend Set, 12ga.

Fiberglass-reinforced, polymer, shotgun stock provides synthetic-stock durability and is overmolded with rubber for a sure grip every time you grab your gun. Rubber is pebble-textured in the gripping areas. Includes recoil-cushioning, butt pad and an integral, sling-swivel stud. Available in standard, factory length of pull or in ShortShot, 12" length of pull for use with body armor or for smaller shooters. Available in sets or individually. Sets and individual components fit 12 gauge only. Mfg: Hogue SPECS: Polymer stock; rubber overmolded. Standard stocks match factory dimensions and length of pull. Stock sets and components fit 12 gauge only. ShortShot stocks have a 12" length of pull. Mossberg Forend Adapter Nut required for Mossberg 500/835 with 6¾" forend tubes.

more >>
Brownells
$52.86 See It
Shotgun Sga Stocks - Mossberg 500/590 Sga Stock Blk

Innovative, integrated accessory system lets you apply the “Magpul Method” to make the tried-and-true 12 gauge 870 into a state-of-the-art tactical shotgun exactly fitted to your mission requirements. Major components are made from the same tough, hard polymer Magpul uses for their AR-15 stocks to ensure superb durability under harsh conditions.   SGA Stock – User-configurable stock offers improved ergonomics, including a spacer system that lets you tailor the length of pull to the individual shooter in ½" increments from 12½" to 14½". Ergonomically enhanced grip area is similar to a pistol grip and a recoil-absorbing butt Mfg: Magpul SPECS: Reinforced, hard-molded polymer, Black, Dark Earth, Gray, or Orange. Fits 12 gauge Remington 870 only. Mounting hardware and instructions included.

more >>
Brownells
$104.45 See It
Shotgun Sga Stocks - Sga Stock Only, Black

Innovative, integrated accessory system lets you apply the “Magpul Method” to make the tried-and-true 12 gauge 870 into a state-of-the-art tactical shotgun exactly fitted to your mission requirements. Major components are made from the same tough, hard polymer Magpul uses for their AR-15 stocks to ensure superb durability under harsh conditions.   SGA Stock – User-configurable stock offers improved ergonomics, including a spacer system that lets you tailor the length of pull to the individual shooter in ½" increments from 12½" to 14½". Ergonomically enhanced grip area is similar to a pistol grip and a recoil-absorbing butt Mfg: Magpul SPECS: Reinforced, hard-molded polymer, Black, Dark Earth, Gray, or Orange. Fits 12 gauge Remington 870 only. Mounting hardware and instructions included.

more >>
Brownells
$104.45 See It
Shotgun Ar-15 Stock Conversion - Moss. Conv. Unit W/M4 Stock

Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate, tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump, and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket receiver extension tube, buttstock, and pistol grip. M4 includes collapsible stock and pistol grip. Mfg: Cavalry Manufacturing, Llc. SPECS: Conversion Unit - Aluminum, anodized, black, matte finish. Approximately 3.7" (9.4cm) high, 3.4" (8.6cm) long, 1" (2.54cm) thick. Rail - Aluminum, anodized, black, matte finish. 7" (17.8cm) long, .64" (16.2mm) wide, .64" high. M4 Stock - 11½" (28.6cm)

more >>
Brownells
$299.99 See It
Rem 870/1100/11-87 Adjustable Comb Stock Sets - Rem 1100/11-87 Stock Set, Carbon Graphite

Drop-in replacement for factory stock lets you adjust the comb height and left/right position to provide a solid cheekweld for different types of shooting or different shooters. Simply loosen two hex-head screws on the right side of the comb to change height; remove the comb and loosen the two support posts to change left/right position. Made from lightweight, yet exceptionally strong, 30% fiberglass-reinforced molded polymer that resists impact, moisture, and surface abrasion. Available with a non-reflecting black finish or silver/black/gray carbon graphite basket weave pattern. Molded-in pebble texturing at the pistol grip helps you maintain a secure hold, while a generous, 1" thick r Mfg: Bill Davis Enterprises SPECS: Fiberglass-reinforced molded polymer, matte black or Carbon Graphite finish, all with black synthetic rubber recoil pad. Mounting hardware and instructions included. Available for 12 gauge shotguns.

more >>
Brownells
$449.99 See It
Shotgun Magazine Tube Cap With Swivel Base - Rem Magazine Cap W/Swivel Base

Machined steel magazine cap with built-in, 360° rotating swivel stud makes it easy to convert your Remington shotgun to accept a carry sling. Unique cap design includes both ratchet and ball/spring type detent systems for no-hassle installation. Includes a ¾" long, wood screw swivel stud for the buttstock. Sling loops not included. Installation requires drilling of buttstock. Mfg: Outdoor Connection SPECS: Steel, black, matte finish. Includes magazine cap with swivel stud, wood screw stud w/black spacer, and instructions. Models available for Remington 870/1100/11-87/11-96, 12 ga. only and Mossberg 500 and Maverick 88, 20 ga. & 12 ga. Moss/Mav includes spanner wrench.

more >>
Brownells
$16.99 See It
Remington 870 Recoil Reducing Folding & Collapsible Buttstock - Remington 870 Collapsible Folding Recoil Reducing Stock

Modular, folding, collapsible butt stock & pistol grip for the Remington 870 shotgun.  The stock features a patented recoil-compensating system for unparalleled recoil reduction.  Rugged adapter design features streamlined hinge.  Stock is locked in the open position by a robust claw. A button releases lock and allows the stock to fold.  Spring tension holds stock in folded position, ensuring a rattle free and rigid lockup.  System is completely ambidextrous and can be switched to fold left or right.  Storage compartments in grip and in butt stock.  Collapsible butt stock is the GLR-16, with battery storage and rubber recoil pad, adjustable to five p Mfg: The Mako Group SPECS: Fits: Mossberg 500/590 shotguns.  Weight – 1 lb 12.54 oz.  Width – 1.85”.  Height – 5.59”.  Length – 13.9”.

more >>
Brownells
$253.00 See It
Shotforce Tactical Car-15 Shotgun Stock - Shotforce Tactical Shotgun Stock

33% glass-filled nylon with pebble-grain surface, provides secure handling in all weather conditions. Furnished with a complete set of adapters and spacers for installation on 12 ga. Mossberg 500, Maverick 88, Remington 870, and Winchester 1200/1300 pump shotguns. Easy to install, requires no modifications to firearm. Lightweight, six position stock with a molded pistol grip mounts firmly on your shotgun to provide superior control and comfort in the field or at the range. Installs easily in minutes with no gunsmithing required for a professional looking, smooth fit. Mounts directly on Mossberg 500/590/835 and on Remington 870, Winchester 1200/1300, Norinco 98, and Maverick 88 with the inc Mfg: Advanced Technology SPECS: Molded polymer, matte black. 10½'''' (26.6cm) – 14¼'''' (36.2cm) L.O.P. Complete kit includes Shotforce buttstock, adapter tube plug, Remington and Norinco 98 adapter, Winchester adapter, washer, Mossberg/Maverick 88 bolt, Remington bolt, Winchester bolt and comes with a free Shotforce Buttpad.

more >>
Brownells
$69.99 See It
Rem 870/1100/11-87 Adjustable Comb Stock Sets - Rem 1100/11-87 Stock Set, Carbon Fiber, Adj Comb & Pull

Drop-in replacement for factory stock lets you adjust the comb height and left/right position to provide a solid cheekweld for different types of shooting or different shooters. Simply loosen two hex-head screws on the right side of the comb to change height; remove the comb and loosen the two support posts to change left/right position. Made from lightweight, yet exceptionally strong, 30% fiberglass-reinforced molded polymer that resists impact, moisture, and surface abrasion. Available with a non-reflecting black finish or silver/black/gray carbon graphite basket weave pattern. Molded-in pebble texturing at the pistol grip helps you maintain a secure hold, while a generous, 1" thick r Mfg: Bill Davis Enterprises SPECS: Fiberglass-reinforced molded polymer, matte black or Carbon Graphite finish, all with black synthetic rubber recoil pad. Mounting hardware and instructions included. Available for 12 gauge shotguns.

more >>
Brownells
$299.99 See It
Shotgun Ar-15 Stock Conversion - Rem. Conv. Unit W/M4 Stock

Machined aluminum stock adapter with Picatinny rail lets you upgrade your shotgun with an AR-15 or M4 buttstock to create the ultimate, tactical Remington 870 or Mossberg 500/590. Changes the geometry of the gun to minimize muzzle jump, and requires no drilling or tapping of the receiver. Mossberg models feature an ambidextrous replacement safety machined specifically to eliminate failure caused by sand and grit. Conversion Unit includes adapter/rail assembly only to accept your aftermarket receiver extension tube, buttstock, and pistol grip. M4 includes collapsible stock and pistol grip. Mfg: Cavalry Manufacturing, Llc. SPECS: Conversion Unit - Aluminum, anodized, black, matte finish. Approximately 3.7" (9.4cm) high, 3.4" (8.6cm) long, 1" (2.54cm) thick. Rail - Aluminum, anodized, black, matte finish. 7" (17.8cm) long, .64" (16.2mm) wide, .64" high. M4 Stock - 11½" (28.6cm)

more >>
Brownells
$309.99 See It
Rem. 870 Supercell Recoil Pad, Synthetic

Manufactured by Remington, the advanced Supercell pad provides an amazing 54% reduction in felt recoil over the standard factory pad. Helps prevent flinching for quick, accurate follow up shots, and ensures all-day shooting comfort. Lightweight, advanced polymer construction won’t change the balance of your 870 shotgun. Easy, drop-in installation. Models to fit synthetic and wood stocked guns. Mfg: Remington SPECS: Advanced polymer, black. Synthetic - Fits factory synthetic stock. 15/16" (2.7cm) thick. Wood - Fits factory wood stock. 11/16" (2.7cm) thick.  870 - Fits Remington 870 shotguns, 20/12 gauge. Requires original mounting screws.

more >>
Brownells
$26.99 See It
Shotgun Sga Stock Sets - Remington 870 Stock Set, Black

The SGA  is an adaptable stock for Remington 870 and Mossberg 500/590/590A1 12 gauge shotguns, designed with a wide range of customizable features and accessories to meet individual end-user needs. The MOE Forend is a simple, lightweight forend for 870 & 500/590/590A1 12 gauge shotguns with 7-5/8" action tube assemblies, designed to provide much-needed adaptability with the attachment of optional MOE accessories and mounts. NOTE: The Remington will NOT work on the Remington 870 Super Mag; and the Mossberg forend in the sets will NOT fit the Mossberg 500 with 6-1/2" action tube assembly or the Maverick or current production Mossberg 500 synthetic with pinned-in actio Mfg: Magpul SPECS: Reinforced, hard-molded polymer, Black, Dark Earth, Gray, or Orange. Fits Remington 870 12 Ga shotguns and Mossberg 500/590/590A1 with 7-5/8" action tube assembly (12 Ga shotguns). Mounting hardware and instructions included. Remington forend NOT compatible with the 870 Super Mag; and

more >>
Brownells
$129.99 See It
Shotgun Fire Sights - Mossberg Fire Sights

Models for Browning BPS, pre-2003 Remington 870/1100, Mossberg 500 and Winchester 1300 guns equipped with slug or turkey barrels and factory sight bases. Front sight provides a glowing red dot that’s easily seen in all ambient light conditions. Fully adjustable, U-notch rear has two glowing green dots for precise sight alignment. Mfg: Williams Gun Sight SPECS: Machined aluminum, black, anodized. Rear - "U" notch fiber optic. Front - Fluorescent red front bead on sheared-style blade. Includes instructions. Browning fits BPS shotgun with slug barrel; does not fit vent rib barrel. Remington fits Remington shotguns with 3/8" doveta

more >>
Brownells
$27.99 See It
Shotgun Sling Mount - Rem Ambi Rear Mount

Designed for tactical operations, these mounts place the rear sling attachment point in front of the operator, so you can quickly shoulder your weapon without getting tangled. Allows single point sling attachment, or use with a front sling mount for two-point sling installation. Loop accepts slings up to 1¼" wide. Rear Mount installs directly behind receiver, in front of buttstock. Precision machined from aluminum billet, then hardcoat anodized matte black. Right hand model for Remington 870, 1100, and 11-87 positions sling on left side of stock. Ambi model for Remington 870, 1100, and 11-87 accepts HK-style clasps and other clip-on sling fasteners. Benelli version fits M1, M3 Mfg: Gg&G, Inc. SPECS: Rem Rear Mount - Aluminum, matte black. ¼" (6.4mm) long, 113/16" (4.6cm) wide, 17/8" (4.8cm) high. Fits 870/1100/11-87, Right Hand only. Rem Ambi Rear Mount - Aluminum, matte black. ¼" long, 2¼" (5.7cm) wide, 17/8" high.

more >>
Brownells
$26.99 See It
Shotgun Sling Mount - Rem Right Hand Rear Mount

Designed for tactical operations, these mounts place the rear sling attachment point in front of the operator, so you can quickly shoulder your weapon without getting tangled. Allows single point sling attachment, or use with a front sling mount for two-point sling installation. Loop accepts slings up to 1¼" wide. Rear Mount installs directly behind receiver, in front of buttstock. Precision machined from aluminum billet, then hardcoat anodized matte black. Right hand model for Remington 870, 1100, and 11-87 positions sling on left side of stock. Ambi model for Remington 870, 1100, and 11-87 accepts HK-style clasps and other clip-on sling fasteners. Benelli version fits M1, M3 Mfg: Gg&G, Inc. SPECS: Rem Rear Mount - Aluminum, matte black. ¼" (6.4mm) long, 113/16" (4.6cm) wide, 17/8" (4.8cm) high. Fits 870/1100/11-87, Right Hand only. Rem Ambi Rear Mount - Aluminum, matte black. ¼" long, 2¼" (5.7cm) wide, 17/8" high.

more >>
Brownells
$26.99 See It
Min Qty 5 53 in. Realtree(R) Camo and Buffalo Rifle / Shotgun Cases

Specially priced for your promotion, this great-looking Shotgun Case could be sporting your logo in forests and fields across the world. The Buffalo hide is a great complement to the camo, which is made of a tough water resistant fabric. Other features include 100% foam padding, soft fleece lining, easy carry handle, exterior zip pocket and a large #8 size main zipper.

more >>
PrintGlobe
$635.30 See It
Remington 870/1100 Shotgun Compact Xrail Systems - Remington 870/1100/11-87 Compact Xrail System, Clear, 15 Rds

Easy to install Comes with connector that fits on Remington shotgun platforms Hard coated black anodized aluminum housing Compact – black nylon tubing, holds up to 14 + 1 Rounds, weighs 1 lb. 8 oz. empty. Full – clear polycarbonate tubing, holds up to 22 + 1 Rounds, weighs 2 lbs 1 oz. empty. Made in the USA Available for Remington 870/1100/1187 Mfg: Roth Concept Innovations

more >>
Brownells
$699.99 See It
Remington 870/Mossberg 500 Telescoping Stock Conversion Kit - Leo Stock Kit Recoil Reducing, Moss 500 12 Gauge Only

Bolt-on replacement stock gives your Remington 870 the control and adaptability of a collapsible M4 carbine stock. Telescoping, five position buttstock allows fast length-of-pull adjustment to adapt to body armor and heavy tactical clothing. Aluminum receiver adapter bolts to rear of receiver with included mounting hardware and requires no permanent alterations to your gun. Accepts the included M4 SOPMOD buttstock or any aftermarket stock that fits a mil-spec (1.14" O.D.) buffer tube. Hogue overmolded rubber pistol grip with palm swells and finger grooves bolts solidly to the receiver adapter to reduce recoil shock and give the shooter better control. Basic LEO (Law Enforcement) mode Mfg: Mesa Tactical Products, Inc. SPECS: Receiver Adapter & Extension Tube – A-356 T6 aluminum, hardcoat anodized, dark gray, matte finish. Enidine Absorber – Aluminum housing, anodized, black; steel internal components. Buttstock – Molded polymer, matte black. Pistol Grip – Fiberglass core overmolded

more >>
Brownells
$281.99 See It
Sks Intrafuse Polymer Collapsible Stocks - Black Intrafuse Stock, W/O Bayonet Cut -14%

Collapsible stock unit coverts any SKS into an easy-to-pack and store short rifle without permanent alterations or gunsmithing. Nearly indestructible, lightweight, composite synthetic stock fits all models of the SKS (even the Model D with slight modification). Six-position adjustable T6 buttstock allows fast changes in length-of-pull. If you are building your SKS from a parts kit, this stock contains three, U.S-made compliance parts: Intrafuse Stock (with sling loop), SAW style Pistol Grip (with storage) and Handguard. Models available to fit SKS rifles with or without cut for blade-style bayonet. Also available with Picatinny/Weaver-style Railed handguard for mounting a red dot, ho Mfg: Tapco Weapons Accessories SPECS: Molded polymer, black. 32” (81.2cm) overall extended length. 2 lb.(.9kg) weight. Fits SKS only. Length of pull extends up to 4” (10.2cm).

more >>
Brownells
$73.99 $64.00 See It
Remington 870/1100/11-87 Blued Shotgun Magazine Extension - Remington 870/1100/11-87 Blue Magazine Extension, 2 Rds

Gives you additional magazine capacity in only a minute. Quick and simple to install and remove. Threaded tube replaces magazine cap screw. Perfect for Shotgun Action Shooting events or Law Enforcement. Sling Swivel Clamp (included on Remington models only) secures extension to the barrel for extra support. Provides a convenient front mounting point for carry strap or sling. Sling Swivel Clamp also available separately. Mfg: Choate SPECS: Extension - Steel, blued, matte finish. 12 ga. only. Includes extended spring, follower and swivel clamp. Sling Swivel Clamp - Blued or parkerized steel, front and rear 1" swivel rings with studs. Chart indicates number of ROUNDS (RDS) in addition to factory magazine capacity for each

more >>
Brownells
$44.99 See It
Search within results
  • Find by Price
    • $ to $