1 to 20 of  87 products for block heater

Result for "block heater"
Tpi Fan Forced Wall Heater Hf3316trp - 4000/3000/2000/1500w 240/208v Ivory

FAN FORCED WALL HEATERS WITHOUT SUMMER FAN SWITCH 4000/3000 ; 2000/1500 Watt Heater with Single Pole Thermostat -240/208V Fan forced wall mount heaters have an 18 gauge steel front with scratch resistant powder coat finish. Electric heaters feature an automatic reset thermal limit and steel block fin element. Vane axial fan blade is powered by a 600 RPM motor that projects airflow up to 175 CFM. Watts are selectable at time of installation; factory wired to higher wattage. Built-in thermostat with 50-90 F temperature range. Rough in dimensions are 14-3/16"W x 19-15/16"H x 4"D. Grill measures 15-3/8"W x 20-1/8"H. UL listed and CSA approved. 1 Year Limited Warranty. 19.94 L. 4.00 W. 14.19 H.

more >>
Global Industrial
$254.95 See It
Tpi Multi-Watt Fan Forced Unit Heater Hf5605t - 240/208v 1 Ph

MULTI-WATT FAN FORCED UNIT HEATERS Multi Watt Heater 240/208V Fan forced unit heaters allow horizontal or vertical discharge using a pivot-action mount. These unit heaters are approved for residential applications. Fan heaters are made using a heavy gauge welded steel cabinet with powder coat finish. Fan forced heaters allow easy control access using a hinged and latched access door. Heavy-duty mounting bracket allow easy installation to walls or ceiling with a minimum mounting height of 6'. Mounting bracket allows pivot-action using hand screw knobs to lock the heater into place. Unit heaters feature a block finned steel element and automatic resetting over-heat limit control for safety and efficiency. Unit heaters include individually adjustable louvers to direct heat. Totally enclosed single phase, permanently lubricated motor is thermally protected for long life. Motor features rubber insulators to minimize vibration and noise. Fan forced unit heaters include hydraulic action thermostat with adjustable temperature range of 50-90 degrees. Thermostat allows remote and wall thermostat installation (not included). Heaters measure 14"W x 11-3/4"D x 14"H. cETLus listed. One Year Limited Warranty. 15.56 L. 13.31 W. 14.00 H.

more >>
Global Industrial
$424.95 See It
949510 Block Heater, Analog 1 Block Capacity

Block Heater, Analog 1 Block Capacity

Zoro
$294.15 See It
949502 Block Heater, Digital 2 Block Capacity

Block Heater, Digital 2 Block Capacity

Zoro
$812.83 See It
949512 Block Heater, Analog 2 Block Capacity

Block Heater, Analog 2 Block Capacity

Zoro
$446.00 See It
949500 Block Heater, Digital 1 Block Capacity

Block Heater, Digital 1 Block Capacity

Zoro
$659.55 See It
EHD108101 Ceramic Terminal Block,11/4x19/16 in.

Ceramic Terminal Block, High Temperature 2 Pole, Voltage Max 600 VAC, Height 27/32 In, Width 1 9/16 In, Length 1 1/4 In, Mounting Into Assembly, Function Used for Wiring of Heater Power and Thermocouple Wiring in High Temperature Locations, Includes Mounting Hole and Screw. For Use With G0512836,...

more >>
Zoro
$10.65 See It
EHD108121 Ceramic Terminal Block,11/4x27/16 in.

Ceramic Terminal Block, High Temperature 3 Pole, Voltage Max 600 VAC, Height 27/32 In, Width 2 7/16 In, Length 1 1/4 In, Mounting Into Assembly, Function Used for Wiring of Heater Power and Thermocouple Wiring in High Temperature Locations, Includes Mounting Holes and Screws. For Use With...

more >>
Zoro
$10.37 See It
Accessories: Generac Generators Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators 5616

Free Shipping on Over 500K Items!

Shop for Outdoors at The Home Depot. The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators helps keep your Generac liquid-cooled automatic standby generator performing even in harsh weather conditions. The

more >>
Home Depot
$131.00 See It
Accessories: Generac Generators Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators 5620

Free Shipping on Over 500K Items!

Shop for Outdoors at The Home Depot. The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators installs easily with the included mounting hardware. The heater keeps your Generac automatic standby generator

more >>
Home Depot
$131.00 See It
Accessories: Generac Generators Extreme Cold Weather Engine Block Heater for Generac 60-Watt 3L Automatic Standby Generators 5617

Free Shipping on Over 500K Items!

Shop for Outdoors at The Home Depot. The Extreme Cold Weather Kits include the appropriate block heater, step by step installation instructions and all necessary mounting hardware for an extra degree of extreme weather protection. Keep your

more >>
Home Depot
$149.00 See It
Accessories: Generac Generators Extreme Cold Weather Engine Block Heater for Generac Automatic Standby 80-Watt 4.6L Generators 5619

Free Shipping on Over 500K Items!

Shop for Outdoors at The Home Depot. Give your generator extra weather protection with the Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators. The heater is made for use with Generac 80 kW liquid-cooled

more >>
Home Depot
$131.00 See It
Accessories: Generac Generators Extreme Cold Weather Engine Block Heater for Generac Automatic Standby 150-Watt 6.8L Generators 5667

Free Shipping on Over 500K Items!

Shop for Outdoors at The Home Depot. The Generac Extreme Cold Weather Engine Block Heater for Generac Automatic Standby Generators is designed for use with Generac 100 and 130 kW liquid-cooled automatic standby generators with 6.8-liter engines. The

more >>
Home Depot
$131.00 See It
C5 CT Control System 120v 240V w/T7 Topside & Heater

The beauty of the C5 control series is its simplicity. All the components from the relays to the fuses are located right on the board. This is nothing new, except that the C5 series accomplishes this without having high voltage run through the board. With this unique design, you get the convenience of an all-in-one board with the safety and longevity of low power electronics. This control system is set up for a 120v & 240v power supply. The control come standard with primary and secondary pumps wired for 240v, light is wired for 12v, and all other components (blower, ozone, circulation pump, stereo/aux) is wired for 120v. Voltages of these controls may easily be changed by moving the neutral wires at the power block in the control as needed. (see instruction manual for wiring configuration)   This Control System Can Operate the Following: 1- Pump #1 120v/240v 2 speed 1- Pump #2 120v/240v 2 speed  ** or ** 1- Pump #2 120/240v 1 speed  ** and ** 1- Air Blower 120v/240v  ** or ** 1- Pump #3 120v/240v 1 speed 1- Ozonator 120v/240v 1- Audio/Aux 120v/240v 1- 12v light   Standard Feautures: - Self-Standing Control - T7 6 Button Digital Topside with adapter plate - 2 Speed 1st Pump Ready / Cord included - 2 Speed 2nd Pump Ready - 1 Speed Aux Ready (Pump #3 or Blower) - Circ. Pump Ready - 12v Spa Light Ready / Cord included - Ozone Ready - Dual voltage Transformer - Flo-Thru Stainless Steel 5.0kw Heater - Thermowell for thru wall applications Dimensions: - 13" Tall - 19" Wide - 6" Deep T7 Topside Dimensions: 5" x 2.5" The T7 Topside The T7 Topside control comes standard with every C5 control system sold, and can be programmed for almost any spa's configuration. From a spa with a single pump and light, to a spa with a circulation pump, two booster pumps, air blower, ozonator, fiber optic lighting, and an entertainment system. The new T7 topside features a unique design that allows the installer to install the unit by simply drilling a 1-3/4" hole instead of needing to cut a rectangle out in the spa out with a jig-saw. Programming the T7 topside is simple and all done using the keypad. The T7 doesn't need a battery to remember it's settings. On-board flash memory makes sure that once a topside is programmed, it stays that way regardless of power status. Safety, built-in The C5 series of controls are one of the industrys first controls to be fully tested and approved under the latest editions of UL testing requirements for the United States, and CSA testing requirements for Canada.     Spa Control Systems should be installed by a licensed electrician, Hot Tub repair technician or individuals with the basic knowledge of electrical safety and knowledge of electronics.

more >>
BW SPA PARTS
$380.00 See It
C5 CT Control System 120v 240V w/T8X Topside & Heater

The beauty of the C5 control series is its simplicity. All the components from the relays to the fuses are located right on the board. This is nothing new, except that the C5 series accomplishes this without having high voltage run through the board. With this unique design, you get the convenience of an all-in-one board with the safety and longevity of low power electronics. This control system is set up for a 120v & 240v power supply. The control come standard with primary and secondary pumps wired for 240v, light is wired for 12v, and all other components (blower, ozone, circulation pump, stereo/aux) is wired for 120v. Voltages of these controls may easily be changed by moving the neutral wires at the power block in the control as needed. (see instruction manual for wiring configuration)   The C5 with T8-X is for use with 2 Pumps, 2 Pump & Air Blower or 3 Pump system Retro-Fit   This Control System Can Operate the Following: 1- Pump #1 120v/240v 2 speed 1- Pump #2 120v/240v 2 speed  ** or ** 1- Pump #2 120/240v 1 speed  ** and ** 1- Air Blower 120v/240v  ** or ** 1- Pump #3 120v/240v 1 speed 1- Ozonator 120v/240v 1- Audio/Aux 120v/240v 1- 12v light 1- Circulation Pump 120v/240v (min 23 GPM)   Standard Feautures: - Self-Standing Control - T8-X 7 Button Digital Topside with adapter plate - 2 Speed 1st Pump Ready / Cord included - 2 Speed 2nd Pump Ready - 1 Speed Aux Ready (Pump #3 or Blower) - Circ. Pump Ready - 12v Spa Light Ready / Cord included - Ozone Ready - Dual voltage Transformer - Flo-Thru Stainless Steel 5.0kw Heater - Thermowell for thru wall applications Dimensions: - 13" Tall - 19" Wide - 6" Deep T7 Topside Dimensions: 5" x 2.5"   Our Most Advanced Topside Yet!  The new T8 Series Command Centers are our most ambitious and feature-packed topsides we've engineered yet. The T8-S is for designed for spas with single or dual booster pumps, while the T8-X features an extra button to operate an additional booster pump or air blower. Both of the new T8 Command Centers actually share the exact same hardware. Our Spa-Touch™ switching technology along with advances in our software allow our latest topsides to have the same versatility as our control boxes. This means our OEM customers can stock one topside body, and use different custom decals and software settings to make the same hardware look, feel, and act like distinctly different topsides. The T8-S and T8-X Command Center are also packed with features above and beyond their predecessors: Larger 4-digit alpha-numeric displays Built-in clocks for more control over filtration timing Easy-to-install design (3-hole installation) Reversible display (Display can be rotated to be visible from either inside or outside of the tub) Temperature and settings locks (Lock the set temperature, user settings, or both) Redesigned, more intuitive interface and menu navigation Safety, built-in The C5 series of controls are one of

more >>
BW SPA PARTS
$419.95 See It
C5 CB Control System 120v 240v w/T7 Topside & Heater

The beauty of the C5 control series is its simplicity. All the components from the relays to the fuses are located right on the board. This is nothing new, except that the C5 series accomplishes this without having high voltage run through the board. With this unique design, you get the convenience of an all-in-one board with the safety and longevity of low power electronics. This control system is set up for a 120v or 240v power supply. The control come standard with primary and secondary pumps wired for 240v, light is wired for 12v, and all other components (blower, ozone, circulation pump, stereo/aux) is wired for 120v. Voltages of these controls may easily be changed by moving the neutral wires at the power block in the control as needed. (see instruction manual for wiring configuration)   This Control System Can Operate the Following: 1- Pump #1 120v/240v 2 speed 1- Pump #2 120v/240v 2 speed  ** or ** 1- Pump #2 120/240v 1 speed  ** and ** 1- Air Blower 120v/240v  ** or ** 1- Pump #3 120v/240v 1 speed 1- Ozonator 120v/240v 1- Audio/Aux 120v/240v 1- 12v light   Standard Feautures: - Self-Standing Control - T7 6 Button Digital Topside with adapter plate  - 2 Speed 1st Pump Ready / Cord included - 2 Speed 2nd Pump Ready - 1 Speed Aux Ready (Pump #3 or Blower) - Circ. Pump Ready - 12v Spa Light Ready / Cord included - Ozone Ready - Dual voltage Transformer - Flo-Thru Stainless Steel 5.0kw Heater - Thermowell for thru wall applications Dimensions: - 13" Tall - 19" Wide - 6" Deep T7 Topside Dimensions: 5" x 2.5" The T7 Topside The T7 Topside control comes standard with every C5 control system sold, and can be programmed for almost any spa's configuration. From a spa with a single pump and light, to a spa with a circulation pump, two booster pumps, air blower, ozonator, fiber optic lighting, and an entertainment system. The new T7 topside features a unique design that allows the installer to install the unit by simply drilling a 1-3/4" hole instead of needing to cut a rectangle out in the spa out with a jig-saw. Programming the T7 topside is simple and all done using the keypad. The T7 doesn't need a battery to remember it's settings. On-board flash memory makes sure that once a topside is programmed, it stays that way regardless of power status. Safety, built-in The C5 series of controls are one of the industrys first controls to be fully tested and approved under the latest editions of UL testing requirements for the United States, and CSA testing requirements for Canada.     Spa Control Systems should be installed by a licensed electrician, Hot Tub repair technician or individuals with the basic knowledge of electrical safety and knowledge of electronics.

more >>
BW SPA PARTS
$375.00 See It
C5 CT Control System 120v 240V w/T8S Topside & Heater

The beauty of the C5 control series is its simplicity. All the components from the relays to the fuses are located right on the board. This is nothing new, except that the C5 series accomplishes this without having high voltage run through the board. With this unique design, you get the convenience of an all-in-one board with the safety and longevity of low power electronics. This control system is set up for a 120v & 240v power supply. The control come standard with primary and secondary pumps wired for 240v, light is wired for 12v, and all other components (blower, ozone, circulation pump, stereo/aux) is wired for 120v. Voltages of these controls may easily be changed by moving the neutral wires at the power block in the control as needed. (see instruction manual for wiring configuration)   The C5 w/T8-S can operate: 1-2-speed Pump, 1 2-speed Pump & Air Blower, 2 2-speed Pump and 1 2-speed Pump & 1 1-speed Pump   This Control System Can Operate the Following: 1- Pump #1 120v/240v 2 speed 1- Pump #2 120v/240v 2 speed  ** or ** 1- Pump #2 120/240v 1 speed  ** or ** 1- Air Blower 120v/240v 1- Ozonator 120v/240v 1- Audio/Aux 120v/240v 1- 12v light 1- Circulation Pump 120v/240v (min 23 GPM)    Standard Feautures: - Self-Standing Control - T8-S 6 Button Digital Topside with adapter plate - 2 Speed 1st Pump Ready / Cord included - 2 Speed 2nd Pump Ready - 1 Speed Aux Ready (Pump #3 or Blower) - Circ. Pump Ready - 12v Spa Light Ready / Cord included - Ozone Ready - Dual voltage Transformer - Flo-Thru Stainless Steel 5.0kw Heater - Thermowell for thru wall applications Dimensions: - 13" Tall - 19" Wide - 6" Deep T8-S Topside Dimensions: 6-3/8" x 3-3/8"   Our Most Advanced Topside Yet!  The new T8 Series Command Centers are our most ambitious and feature-packed topsides we've engineered yet. The T8-S is for designed for spas with single or dual booster pumps, while the T8-X features an extra button to operate an additional booster pump or air blower. Both of the new T8 Command Centers actually share the exact same hardware. Our Spa-Touch™ switching technology along with advances in our software allow our latest topsides to have the same versatility as our control boxes. This means our OEM customers can stock one topside body, and use different custom decals and software settings to make the same hardware look, feel, and act like distinctly different topsides. The T8-S and T8-X Command Center are also packed with features above and beyond their predecessors: Larger 4-digit alpha-numeric displays Built-in clocks for more control over filtration timing Easy-to-install design (3-hole installation) Reversible display (Display can be rotated to be visible from either inside or outside of the tub) Temperature and settings locks (Lock the set temperature, user settings, or both) Redesigned, more intuitive interface and menu navigation Safety, built-in The C5 series of controls are one of the industrys fir

more >>
BW SPA PARTS
$419.95 See It
C5 CR Digital Remote Heater Spa Control System 120v 240v

The beauty of the C5 control series is its simplicity. All the components from the relays to the fuses are located right on the board. This is nothing new, except that the C5 series accomplishes this without having high voltage run through the board. With this unique design, you get the convenience of an all-in-one board with the safety and longevity of low power electronics. This control system is set up for a 120v or 240v power supply. The control come standard with primary and secondary pumps wired for 240v, light is wired for 12v, and all other components (blower, ozone, circulation pump, stereo/aux) is wired for 120v. Voltages of these controls may easily be changed by moving the neutral wires at the power block in the control as needed. (see instruction manual for wiring configuration)   This Control System Can Operate the Following: 1- Pump #1 120v/240v 2 speed 1- Pump #2 120v/240v 1 Speed  ** and ** 1- Pump #3 120v/240v 1 speed              ** or ** 1- Air Blower 120v/240v 1- Ozonator 120v/240v 1- Audio/Aux 120v/240v 1- 12v light 1- Circulation Pump (min 23 GPM) 120v/240v   Standard Feautures: - Self-Standing Control - Choice of T7, T8-S or T8-X Topside with adapter plate - 2 Speed 1st Pump Ready / Cord included - 2 Speed 2nd Pump Ready - 1 Speed Aux Ready (Pump #3 or Blower) - Circ. Pump Ready (min 23 GPM) - 12v Spa Light Ready / Cord included - Ozone Ready - Remote 5.0kw Stainless Steel 15"Heater (4ft Power Cable) - Thermowell for thru wall applications - Dual Voltage Transformer Dimensions: - 13" Tall - 19" Wide - 6" Deep T8-X & T8-S Topside Dimensions: 6-3/8" x 3-3/8"  T7 Topside Dimensions: 5" x 2-1/2"   Your Choice Of Topside Command Centers   The Easiest to Install Topside on the Market The T7 Command Center is United Spa Control's entry-level topside offering. Its simple interface and compact easy-to-install design have quickly made it a favorite among those looking to upgrade from other/older control systems. The T7 features our patent-pending Spa-Touch™ switching technology, can operate any possible hardware configuration of a C5 Series electronic control, and also provides basic filtration functions.    Our Most Advanced Topside Yet! The new T8 Series Command Centers are our most ambitious and feature-packed topsides we've engineered yet. The T8-S is for designed for spas with single or dual booster pumps, while the T8-X features an extra button to operate an additional booster pump or air blower. Both of the new T8 Command Centers actually share the exact same hardware. Our Spa-Touch™ switching technology along with advances in our software allow our latest topsides to have the same versatility as our control boxes. This means our OEM customers can stock one topside body, and use different custom decals and software settings to make the same hardware look, feel, and act like distinctly different topsides.    Safety, built-in The C5 series of controls are one of the industrys firs

more >>
BW SPA PARTS
$399.95 See It
C5 CG Digital Spa Control System NO Heater 120v 240v

The beauty of the C5 control series is its simplicity. All the components from the relays to the fuses are located right on the board. This is nothing new, except that the C5 series accomplishes this without having high voltage run through the board. With this unique design, you get the convenience of an all-in-one board with the safety and longevity of low power electronics. This control system is set up for a 120 volts or 240 volts power supply. The control come standard with primary and secondary pumps wired for 240 volts, light is wired for 12v, and all other components (blower, ozone, circulation pump, stereo/aux) is wired for 120v. Voltages of these controls may easily be changed by moving the neutral wires at the power block in the control as needed. (see instruction manual for wiring configuration)  Control System Can Operate the Following: 1- Pump #1 120v/240v 2 speed 1- Pump #2 120v/240v 1 Speed  ** AND ** 1- Pump #3 120v/240v 1 speed              ** OR ** 1- Air Blower 120v/240v 1- Ozonator 120v/240v 1- Audio/Aux 120v/240v 1- 12v light 1- Circulation Pump 120v/240v 1- GAS or Auxillary Heater (not included)   Standard Feautures: Self-Standing Control Choice of T7, T8-S or T8-X Topside with adapter plate 2 Speed 1st Pump Ready / Cord included 2 Speed 2nd Pump Ready 1 Speed Aux Ready (Pump #3 or Blower) Circ. Pump Ready (min 23 GPM) 12v Spa Light Ready / Cord included Ozone Ready NO Heater Included Thermowell for thru wall applications Dual Voltage Transformer Dimensions: 13" Tall x 19" Wide x  6" Deep T8-X & T8-S Topside Dimensions: 6-3/8" x 3-3/8"  T7 Topside Dimensions: 5" x 2-1/2"   Your Choice Of Topside Command Centers     The Easiest to Install Topside on the Market The T7 Command Center is United Spa Control's entry-level topside offering. Its simple interface and compact easy-to-install design have quickly made it a favorite among those looking to upgrade from other/older control systems. The T7 features the patent-pending Spa-Touch™ switching technology, can operate any possible hardware configuration of a C5 Series electronic control, and also provides basic filtration functions.    Our Most Advanced Topside Yet! The new T8 Series Command Centers are our most ambitious and feature-packed topsides we've engineered yet. The T8-S is for designed for spas with single or dual booster pumps, while the T8-X features an extra button to operate an additional booster pump or air blower. Both of the new T8 Command Centers actually share the exact same hardware. Our Spa-Touch™ switching technology along with advances in our software allow our latest topsides to have the same versatility as our control boxes. This means our OEM customers can stock one topside body, and use different custom decals and software settings to make the same hardware look, feel, and act like distinctly different topsides.    Safety, built-in The C5 series of controls are one of the industrys first controls to be

more >>
BW SPA PARTS
$339.95 See It
1984 BMW 528e (E28) Hose - Block to Heater Valve
bavarian-autosport
$5.95 See It