1 to 17 of  17 products for bosch tankless

Result for "bosch tankless"
Therm C1210ES 18" X Tankless Water Heater With 225 000 BTU Max Input Electronic Ignition

This is the highest performance fully condensing gas tankless water heater from Bosch Unlike traditional non-condensing models condensing technology captures heat from the exhaust gas and uses it to preheat the incoming cold water This increases effi...

more >>
AppliancesConnection
$1,889.00 See It
Therm 520HN 19" Gas Tankless Water Heater With 117 000 Max Input BTU Patented Hydro

The Therm 520 HN incorporates an evolutionary hydro-power ignition system which allows this tankless water heater to work without a standing pilot grid connection or battery A small turbine inside the water heater uses the energy from the flowing wat...

more >>
AppliancesConnection
$769.00 See It
Therm 940ES 18" X Gas X Tankless Water Heater With 199 000 BTU Max Input Energy Star

Our highest capacity non-condensing model was designed to meet the demands of busy households and offers premium features you expect from Bosch This model can be installed almost anywhere thanks to its sealed combustion and dual-fan technology

more >>
AppliancesConnection
$1,049.00 See It
Therm 830ES 18" Gas Tankless Water Heater With 175 000 Max Input BTU Non Condensing

The 830 ES is another new model from Bosch that offers advanced software safety and precision controls but requires only 175000 BTUHr input The 830 ES supports Intelligent Cascading up to 24 units so its a perfect solution for big commercial applicat...

more >>
AppliancesConnection
$929.00 See It
2400/2700ES Series Horizontal Vent Kit (Compatible with Bosch 660 Series Tankless Water Heaters) AQ3ES

2400/2700ES Series Horizontal Vent Kit - AQ3ES. Intake Vent Hood w/ 10 in. Sleeve - 2FAIGAL03. 3 in. x 12 in. Straight Pipe - 2SVEPWCF0301. Exhaust Vent Hoodwith 10 in. Sleeve - 2SVSTB03. 3 in. 90 Degree Elbow - 2SVEEWCF0391. 3 in. Wall Thimble - 2SVSTCEC04. 3 in. x 18 in. Straight Pipe - 2SVEPWCF0301.5. Compatible with Bosch 660 series tankless water heaters. This item may ship in the original manufacturer's packaging.

more >>
CPO Outlets
$69.99 See It
(FF-36) 3/4" I.D. x 36" L Stainless Steel Flex Connector with 3/4" FIP

Benefits & Features304 Series Corrugated Stainless Steel Ease of Installation Saves Time & MoneyNo Rubber or Plastic Hose to Reduce Flow Largest Inner Diameter for required GPMNo Deformity in Curvature Will Hold BendManufactured to US Military/Aerospace specificationsHighest Quality Construction & MaterialsRe-Usable and Re-BendableStronger & More Flexible Than CopperFalcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/AquafloWill Not Discolor, Corrode Or RustNo Galvanic Effect No Dielectric Union NeededFalcon WarrantyAvailable In Sizes from 3/8" To 2" I.D. In Various Lengths for Most Water Flowing Applications and Appliances All Fittings Chrome Plated Solid BrassWill Not Crimp or Kink Resists Work HardeningBurst Pressure Rated Up To 2200 psiHigh Temp EPDM Washer (40° to 300°F)100% Leak TestedCERTIFICATIONS & LISTINGSIAPMO Certified to NSF ANSI Section 61 IAPMO/UPC Tested and Certified Conforms To ASME A112.18.6ASME A112.18.6 Description: This standard establishes requirements for flexible water connectors in potable water systems under continuous pressure and in accessible location only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identificationCODE REQUIREMENTSSatisfy Inspector & Code Requirements UPC IPC IMC IRC State of Wisconsin L.A. City South Texas etcSEISMIC MOVEMENT In areas of SEISMIC movement using Falcon Stainless connectors will decrease the chances of damage caused by hard-piped copper installations and/or copper connectors cracking and breaking. Ensure Appliance Installation, Performance & WarrantyMany appliance manufacturers require that flexible connectors be used when installing their products or the Warranty is void.Water Flowing Appliances REQUIRE FULL FLOW to ensure appliance operates at the rate for which it was designed.Appliances last longer and operate at optimum performance when maximum flow is obtained. Settling of heavy water appliances, that are hard-piped with copper or CPVC, can damage the installation causing leaks. Using Falcon Stainless connectors will eliminate damage to the connection ensuring a secure installation.Applications & Uses: For Potable Water - Residential & Commercial: Water Heaters: Tankless - Takagi, Bosch, Noritz etc. & Storage Type- Rheem, State, etc. Water Treatment/Purification/Softening: RO, UV, Salt, Owned & Rented, Culligan, Hague, Rayne, Rainsoft, GE Autotrol Bypass & Performa Valve, Zenon, Fleck, Autotrol, Clack etc. SinksToiletsBoilers

more >>
IsoPure Water
$16.92 See It
(SWC-1X24) 1" I.D. x 24" L Stainless Steel Flex Connector with 1" FIP

Benefits & Features304 Series Corrugated Stainless Steel Ease of Installation Saves Time & MoneyNo Rubber or Plastic Hose to Reduce Flow Largest Inner Diameter for required GPMNo Deformity in Curvature Will Hold BendManufactured to US Military/Aerospace specificationsHighest Quality Construction & MaterialsRe-Usable and Re-BendableStronger & More Flexible Than CopperFalcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/AquafloWill Not Discolor, Corrode Or RustNo Galvanic Effect No Dielectric Union NeededFalcon WarrantyAvailable In Sizes from 3/8" To 2" I.D. In Various Lengths for Most Water Flowing Applications and Appliances All Fittings Chrome Plated Solid BrassWill Not Crimp or Kink Resists Work HardeningBurst Pressure Rated Up To 2200 psiHigh Temp EPDM Washer (40° to 300°F)100% Leak TestedCERTIFICATIONS & LISTINGSIAPMO Certified to NSF ANSI Section 61 IAPMO/UPC Tested and Certified Conforms To ASME A112.18.6ASME A112.18.6 Description: This standard establishes requirements for flexible water connectors in potable water systems under continuous pressure and in accessible location only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identificationCODE REQUIREMENTSSatisfy Inspector & Code Requirements UPC IPC IMC IRC State of Wisconsin L.A. City South Texas etcSEISMIC MOVEMENT In areas of SEISMIC movement using Falcon Stainless connectors will decrease the chances of damage caused by hard-piped copper installations and/or copper connectors cracking and breaking. Ensure Appliance Installation, Performance & WarrantyMany appliance manufacturers require that flexible connectors be used when installing their products or the Warranty is void.Water Flowing Appliances REQUIRE FULL FLOW to ensure appliance operates at the rate for which it was designed.Appliances last longer and operate at optimum performance when maximum flow is obtained. Settling of heavy water appliances, that are hard-piped with copper or CPVC, can damage the installation causing leaks. Using Falcon Stainless connectors will eliminate damage to the connection ensuring a secure installation.Applications & Uses: For Potable Water - Residential & Commercial: Water Heaters: Tankless - Takagi, Bosch, Noritz etc. & Storage Type- Rheem, State, etc. Water Treatment/Purification/Softening: RO, UV, Salt, Owned & Rented, Culligan, Hague, Rayne, Rainsoft, GE Autotrol Bypass & Performa Valve, Zenon, Fleck, Autotrol, Clack etc. SinksToiletsBoilers

more >>
IsoPure Water
$31.99 See It
(SWC-1X12) 1" NPT x 12" L Stainless Steel Flex Connector with 1" FIP

Benefits & Features304 Series Corrugated Stainless Steel Ease of Installation Saves Time & MoneyNo Rubber or Plastic Hose to Reduce Flow Largest Inner Diameter for required GPMNo Deformity in Curvature Will Hold BendManufactured to US Military/Aerospace specificationsHighest Quality Construction & MaterialsRe-Usable and Re-BendableStronger & More Flexible Than CopperFalcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/AquafloWill Not Discolor, Corrode Or RustNo Galvanic Effect No Dielectric Union NeededFalcon WarrantyAvailable In Sizes from 3/8" To 2" I.D. In Various Lengths for Most Water Flowing Applications and Appliances All Fittings Chrome Plated Solid BrassWill Not Crimp or Kink Resists Work HardeningBurst Pressure Rated Up To 2200 psiHigh Temp EPDM Washer (40° to 300°F)100% Leak TestedCERTIFICATIONS & LISTINGSIAPMO Certified to NSF ANSI Section 61 IAPMO/UPC Tested and Certified Conforms To ASME A112.18.6ASME A112.18.6 Description: This standard establishes requirements for flexible water connectors in potable water systems under continuous pressure and in accessible location only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identificationCODE REQUIREMENTSSatisfy Inspector & Code Requirements UPC IPC IMC IRC State of Wisconsin L.A. City South Texas etcSEISMIC MOVEMENT In areas of SEISMIC movement using Falcon Stainless connectors will decrease the chances of damage caused by hard-piped copper installations and/or copper connectors cracking and breaking. Ensure Appliance Installation, Performance & WarrantyMany appliance manufacturers require that flexible connectors be used when installing their products or the Warranty is void.Water Flowing Appliances REQUIRE FULL FLOW to ensure appliance operates at the rate for which it was designed.Appliances last longer and operate at optimum performance when maximum flow is obtained. Settling of heavy water appliances, that are hard-piped with copper or CPVC, can damage the installation causing leaks. Using Falcon Stainless connectors will eliminate damage to the connection ensuring a secure installation.Applications & Uses: For Potable Water - Residential & Commercial: Water Heaters: Tankless - Takagi, Bosch, Noritz etc. & Storage Type- Rheem, State, etc. Water Treatment/Purification/Softening: RO, UV, Salt, Owned & Rented, Culligan, Hague, Rayne, Rainsoft, GE Autotrol Bypass & Performa Valve, Zenon, Fleck, Autotrol, Clack etc. SinksToiletsBoilers

more >>
IsoPure Water
$18.03 See It
(FF-12) 3/4" I.D. x 12" L Stainless Steel Flex Connector with 3/4" FIP

Benefits & Features304 Series Corrugated Stainless Steel Ease of Installation Saves Time & MoneyNo Rubber or Plastic Hose to Reduce Flow Largest Inner Diameter for required GPMNo Deformity in Curvature Will Hold BendManufactured to US Military/Aerospace specificationsHighest Quality Construction & MaterialsRe-Usable and Re-BendableStronger & More Flexible Than CopperFalcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/AquafloWill Not Discolor, Corrode Or RustNo Galvanic Effect No Dielectric Union NeededFalcon WarrantyAvailable In Sizes from 3/8" To 2" I.D. In Various Lengths for Most Water Flowing Applications and Appliances All Fittings Chrome Plated Solid BrassWill Not Crimp or Kink Resists Work HardeningBurst Pressure Rated Up To 2200 psiHigh Temp EPDM Washer (40° to 300°F)100% Leak TestedCERTIFICATIONS & LISTINGSIAPMO Certified to NSF ANSI Section 61 IAPMO/UPC Tested and Certified Conforms To ASME A112.18.6ASME A112.18.6 Description: This standard establishes requirements for flexible water connectors in potable water systems under continuous pressure and in accessible location only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identificationCODE REQUIREMENTSSatisfy Inspector & Code Requirements UPC IPC IMC IRC State of Wisconsin L.A. City South Texas etcSEISMIC MOVEMENT In areas of SEISMIC movement using Falcon Stainless connectors will decrease the chances of damage caused by hard-piped copper installations and/or copper connectors cracking and breaking. Ensure Appliance Installation, Performance & WarrantyMany appliance manufacturers require that flexible connectors be used when installing their products or the Warranty is void.Water Flowing Appliances REQUIRE FULL FLOW to ensure appliance operates at the rate for which it was designed.Appliances last longer and operate at optimum performance when maximum flow is obtained. Settling of heavy water appliances, that are hard-piped with copper or CPVC, can damage the installation causing leaks. Using Falcon Stainless connectors will eliminate damage to the connection ensuring a secure installation.Applications & Uses: For Potable Water - Residential & Commercial: Water Heaters: Tankless - Takagi, Bosch, Noritz etc. & Storage Type- Rheem, State, etc. Water Treatment/Purification/Softening: RO, UV, Salt, Owned & Rented, Culligan, Hague, Rayne, Rainsoft, GE Autotrol Bypass & Performa Valve, Zenon, Fleck, Autotrol, Clack etc. SinksToiletsBoilers

more >>
IsoPure Water
$8.14 See It
(SWC-112X24) 1-1/2" I.D. x 24" L Stainless Steel Flex Connector with 1-1/2" FIP

Benefits & Features304 Series Corrugated Stainless Steel Ease of Installation Saves Time & MoneyNo Rubber or Plastic Hose to Reduce Flow Largest Inner Diameter for required GPMNo Deformity in Curvature Will Hold BendManufactured to US Military/Aerospace specificationsHighest Quality Construction & MaterialsRe-Usable and Re-BendableStronger & More Flexible Than CopperFalcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/AquafloWill Not Discolor, Corrode Or RustNo Galvanic Effect No Dielectric Union NeededFalcon WarrantyAvailable In Sizes from 3/8" To 2" I.D. In Various Lengths for Most Water Flowing Applications and Appliances All Fittings Chrome Plated Solid BrassWill Not Crimp or Kink Resists Work HardeningBurst Pressure Rated Up To 2200 psiHigh Temp EPDM Washer (40° to 300°F)100% Leak TestedCERTIFICATIONS & LISTINGSIAPMO Certified to NSF ANSI Section 61 IAPMO/UPC Tested and Certified Conforms To ASME A112.18.6ASME A112.18.6 Description: This standard establishes requirements for flexible water connectors in potable water systems under continuous pressure and in accessible location only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identificationCODE REQUIREMENTSSatisfy Inspector & Code Requirements UPC IPC IMC IRC State of Wisconsin L.A. City South Texas etcSEISMIC MOVEMENT In areas of SEISMIC movement using Falcon Stainless connectors will decrease the chances of damage caused by hard-piped copper installations and/or copper connectors cracking and breaking. Ensure Appliance Installation, Performance & WarrantyMany appliance manufacturers require that flexible connectors be used when installing their products or the Warranty is void.Water Flowing Appliances REQUIRE FULL FLOW to ensure appliance operates at the rate for which it was designed.Appliances last longer and operate at optimum performance when maximum flow is obtained. Settling of heavy water appliances, that are hard-piped with copper or CPVC, can damage the installation causing leaks. Using Falcon Stainless connectors will eliminate damage to the connection ensuring a secure installation.Applications & Uses: For Potable Water - Residential & Commercial: Water Heaters: Tankless - Takagi, Bosch, Noritz etc. & Storage Type- Rheem, State, etc. Water Treatment/Purification/Softening: RO, UV, Salt, Owned & Rented, Culligan, Hague, Rayne, Rainsoft, GE Autotrol Bypass & Performa Valve, Zenon, Fleck, Autotrol, Clack etc. SinksToiletsBoilers

more >>
IsoPure Water
$44.97 See It
(FF-24) 3/4" I.D. x 24" L Stainless Steel Flex Connector with 3/4" FIP

Benefits & Features304 Series Corrugated Stainless Steel Ease of Installation Saves Time & MoneyNo Rubber or Plastic Hose to Reduce Flow Largest Inner Diameter for required GPMNo Deformity in Curvature Will Hold BendManufactured to US Military/Aerospace specificationsHighest Quality Construction & MaterialsRe-Usable and Re-BendableStronger & More Flexible Than CopperFalcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/AquafloWill Not Discolor, Corrode Or RustNo Galvanic Effect No Dielectric Union NeededFalcon WarrantyAvailable In Sizes from 3/8" To 2" I.D. In Various Lengths for Most Water Flowing Applications and Appliances All Fittings Chrome Plated Solid BrassWill Not Crimp or Kink Resists Work HardeningBurst Pressure Rated Up To 2200 psiHigh Temp EPDM Washer (40° to 300°F)100% Leak TestedCERTIFICATIONS & LISTINGSIAPMO Certified to NSF ANSI Section 61 IAPMO/UPC Tested and Certified Conforms To ASME A112.18.6ASME A112.18.6 Description: This standard establishes requirements for flexible water connectors in potable water systems under continuous pressure and in accessible location only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identificationCODE REQUIREMENTSSatisfy Inspector & Code Requirements UPC IPC IMC IRC State of Wisconsin L.A. City South Texas etcSEISMIC MOVEMENT In areas of SEISMIC movement using Falcon Stainless connectors will decrease the chances of damage caused by hard-piped copper installations and/or copper connectors cracking and breaking. Ensure Appliance Installation, Performance & WarrantyMany appliance manufacturers require that flexible connectors be used when installing their products or the Warranty is void.Water Flowing Appliances REQUIRE FULL FLOW to ensure appliance operates at the rate for which it was designed.Appliances last longer and operate at optimum performance when maximum flow is obtained. Settling of heavy water appliances, that are hard-piped with copper or CPVC, can damage the installation causing leaks. Using Falcon Stainless connectors will eliminate damage to the connection ensuring a secure installation.Applications & Uses: For Potable Water - Residential & Commercial: Water Heaters: Tankless - Takagi, Bosch, Noritz etc. & Storage Type- Rheem, State, etc. Water Treatment/Purification/Softening: RO, UV, Salt, Owned & Rented, Culligan, Hague, Rayne, Rainsoft, GE Autotrol Bypass & Performa Valve, Zenon, Fleck, Autotrol, Clack etc. SinksToiletsBoilers

more >>
IsoPure Water
$8.99 See It
(FF-18) 3/4" I.D. x 18" L Stainless Steel Flex Connector with 3/4" FIP

Benefits & Features304 Series Corrugated Stainless Steel Ease of Installation Saves Time & MoneyNo Rubber or Plastic Hose to Reduce Flow Largest Inner Diameter for required GPMNo Deformity in Curvature Will Hold BendManufactured to US Military/Aerospace specificationsHighest Quality Construction & MaterialsRe-Usable and Re-BendableStronger & More Flexible Than CopperFalcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/AquafloWill Not Discolor, Corrode Or RustNo Galvanic Effect No Dielectric Union NeededFalcon WarrantyAvailable In Sizes from 3/8" To 2" I.D. In Various Lengths for Most Water Flowing Applications and Appliances All Fittings Chrome Plated Solid BrassWill Not Crimp or Kink Resists Work HardeningBurst Pressure Rated Up To 2200 psiHigh Temp EPDM Washer (40° to 300°F)100% Leak TestedCERTIFICATIONS & LISTINGSIAPMO Certified to NSF ANSI Section 61 IAPMO/UPC Tested and Certified Conforms To ASME A112.18.6ASME A112.18.6 Description: This standard establishes requirements for flexible water connectors in potable water systems under continuous pressure and in accessible location only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identificationCODE REQUIREMENTSSatisfy Inspector & Code Requirements UPC IPC IMC IRC State of Wisconsin L.A. City South Texas etcSEISMIC MOVEMENT In areas of SEISMIC movement using Falcon Stainless connectors will decrease the chances of damage caused by hard-piped copper installations and/or copper connectors cracking and breaking. Ensure Appliance Installation, Performance & WarrantyMany appliance manufacturers require that flexible connectors be used when installing their products or the Warranty is void.Water Flowing Appliances REQUIRE FULL FLOW to ensure appliance operates at the rate for which it was designed.Appliances last longer and operate at optimum performance when maximum flow is obtained. Settling of heavy water appliances, that are hard-piped with copper or CPVC, can damage the installation causing leaks. Using Falcon Stainless connectors will eliminate damage to the connection ensuring a secure installation.Applications & Uses: For Potable Water - Residential & Commercial: Water Heaters: Tankless - Takagi, Bosch, Noritz etc. & Storage Type- Rheem, State, etc. Water Treatment/Purification/Softening: RO, UV, Salt, Owned & Rented, Culligan, Hague, Rayne, Rainsoft, GE Autotrol Bypass & Performa Valve, Zenon, Fleck, Autotrol, Clack etc. SinksToiletsBoilers

more >>
IsoPure Water
$8.28 See It
(FF-15) 3/4" I.D. x 15" L Stainless Steel Flex Connector with 3/4" FIP

Benefits & Features304 Series Corrugated Stainless Steel Ease of Installation Saves Time & MoneyNo Rubber or Plastic Hose to Reduce Flow Largest Inner Diameter for required GPMNo Deformity in Curvature Will Hold BendManufactured to US Military/Aerospace specificationsHighest Quality Construction & MaterialsRe-Usable and Re-BendableStronger & More Flexible Than CopperFalcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/AquafloWill Not Discolor, Corrode Or RustNo Galvanic Effect No Dielectric Union NeededFalcon WarrantyAvailable In Sizes from 3/8" To 2" I.D. In Various Lengths for Most Water Flowing Applications and Appliances All Fittings Chrome Plated Solid BrassWill Not Crimp or Kink Resists Work HardeningBurst Pressure Rated Up To 2200 psiHigh Temp EPDM Washer (40° to 300°F)100% Leak TestedCERTIFICATIONS & LISTINGSIAPMO Certified to NSF ANSI Section 61 IAPMO/UPC Tested and Certified Conforms To ASME A112.18.6ASME A112.18.6 Description: This standard establishes requirements for flexible water connectors in potable water systems under continuous pressure and in accessible location only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identificationCODE REQUIREMENTSSatisfy Inspector & Code Requirements UPC IPC IMC IRC State of Wisconsin L.A. City South Texas etcSEISMIC MOVEMENT In areas of SEISMIC movement using Falcon Stainless connectors will decrease the chances of damage caused by hard-piped copper installations and/or copper connectors cracking and breaking. Ensure Appliance Installation, Performance & WarrantyMany appliance manufacturers require that flexible connectors be used when installing their products or the Warranty is void.Water Flowing Appliances REQUIRE FULL FLOW to ensure appliance operates at the rate for which it was designed.Appliances last longer and operate at optimum performance when maximum flow is obtained. Settling of heavy water appliances, that are hard-piped with copper or CPVC, can damage the installation causing leaks. Using Falcon Stainless connectors will eliminate damage to the connection ensuring a secure installation.Applications & Uses: For Potable Water - Residential & Commercial: Water Heaters: Tankless - Takagi, Bosch, Noritz etc. & Storage Type- Rheem, State, etc. Water Treatment/Purification/Softening: RO, UV, Salt, Owned & Rented, Culligan, Hague, Rayne, Rainsoft, GE Autotrol Bypass & Performa Valve, Zenon, Fleck, Autotrol, Clack etc. SinksToiletsBoilers

more >>
IsoPure Water
$8.93 See It
(SWC-112X18) 1-1/2" I.D. x 18" L Stainless Steel Flex Connector with 1-1/2" FIP

Benefits & Features304 Series Corrugated Stainless Steel Ease of Installation Saves Time & MoneyNo Rubber or Plastic Hose to Reduce Flow Largest Inner Diameter for required GPMNo Deformity in Curvature Will Hold BendManufactured to US Military/Aerospace specificationsHighest Quality Construction & MaterialsRe-Usable and Re-BendableStronger & More Flexible Than CopperFalcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/AquafloWill Not Discolor, Corrode Or RustNo Galvanic Effect No Dielectric Union NeededFalcon WarrantyAvailable In Sizes from 3/8" To 2" I.D. In Various Lengths for Most Water Flowing Applications and Appliances All Fittings Chrome Plated Solid BrassWill Not Crimp or Kink Resists Work HardeningBurst Pressure Rated Up To 2200 psiHigh Temp EPDM Washer (40° to 300°F)100% Leak TestedCERTIFICATIONS & LISTINGSIAPMO Certified to NSF ANSI Section 61 IAPMO/UPC Tested and Certified Conforms To ASME A112.18.6ASME A112.18.6 Description: This standard establishes requirements for flexible water connectors in potable water systems under continuous pressure and in accessible location only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identificationCODE REQUIREMENTSSatisfy Inspector & Code Requirements UPC IPC IMC IRC State of Wisconsin L.A. City South Texas etcSEISMIC MOVEMENT In areas of SEISMIC movement using Falcon Stainless connectors will decrease the chances of damage caused by hard-piped copper installations and/or copper connectors cracking and breaking. Ensure Appliance Installation, Performance & WarrantyMany appliance manufacturers require that flexible connectors be used when installing their products or the Warranty is void.Water Flowing Appliances REQUIRE FULL FLOW to ensure appliance operates at the rate for which it was designed.Appliances last longer and operate at optimum performance when maximum flow is obtained. Settling of heavy water appliances, that are hard-piped with copper or CPVC, can damage the installation causing leaks. Using Falcon Stainless connectors will eliminate damage to the connection ensuring a secure installation.Applications & Uses: For Potable Water - Residential & Commercial: Water Heaters: Tankless - Takagi, Bosch, Noritz etc. & Storage Type- Rheem, State, etc. Water Treatment/Purification/Softening: RO, UV, Salt, Owned & Rented, Culligan, Hague, Rayne, Rainsoft, GE Autotrol Bypass & Performa Valve, Zenon, Fleck, Autotrol, Clack etc. SinksToiletsBoilers

more >>
IsoPure Water
$47.99 See It
(SWC-2x24) 2" I.D. x 24" L Stainless Steel Flex Connector with 2" FIP

Benefits & Features304 Series Corrugated Stainless Steel Ease of Installation Saves Time & MoneyNo Rubber or Plastic Hose to Reduce Flow Largest Inner Diameter for required GPMNo Deformity in Curvature Will Hold BendManufactured to US Military/Aerospace specificationsHighest Quality Construction & MaterialsRe-Usable and Re-BendableStronger & More Flexible Than CopperFalcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/AquafloWill Not Discolor, Corrode Or RustNo Galvanic Effect No Dielectric Union NeededFalcon WarrantyAvailable In Sizes from 3/8" To 2" I.D. In Various Lengths for Most Water Flowing Applications and Appliances All Fittings Chrome Plated Solid BrassWill Not Crimp or Kink Resists Work HardeningBurst Pressure Rated Up To 2200 psiHigh Temp EPDM Washer (40° to 300°F)100% Leak TestedCERTIFICATIONS & LISTINGSIAPMO Certified to NSF ANSI Section 61 IAPMO/UPC Tested and Certified Conforms To ASME A112.18.6ASME A112.18.6 Description: This standard establishes requirements for flexible water connectors in potable water systems under continuous pressure and in accessible location only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identificationCODE REQUIREMENTSSatisfy Inspector & Code Requirements UPC IPC IMC IRC State of Wisconsin L.A. City South Texas etcSEISMIC MOVEMENT In areas of SEISMIC movement using Falcon Stainless connectors will decrease the chances of damage caused by hard-piped copper installations and/or copper connectors cracking and breaking. Ensure Appliance Installation, Performance & WarrantyMany appliance manufacturers require that flexible connectors be used when installing their products or the Warranty is void.Water Flowing Appliances REQUIRE FULL FLOW to ensure appliance operates at the rate for which it was designed.Appliances last longer and operate at optimum performance when maximum flow is obtained. Settling of heavy water appliances, that are hard-piped with copper or CPVC, can damage the installation causing leaks. Using Falcon Stainless connectors will eliminate damage to the connection ensuring a secure installation.Applications & Uses: For Potable Water - Residential & Commercial: Water Heaters: Tankless - Takagi, Bosch, Noritz etc. & Storage Type- Rheem, State, etc. Water Treatment/Purification/Softening: RO, UV, Salt, Owned & Rented, Culligan, Hague, Rayne, Rainsoft, GE Autotrol Bypass & Performa Valve, Zenon, Fleck, Autotrol, Clack etc. SinksToiletsBoilers

more >>
IsoPure Water
$72.98 See It
(SWC-1X18) 1" NPT x 18" L Stainless Steel Flex Connector with 1" FIP

Benefits & Features304 Series Corrugated Stainless Steel Ease of Installation Saves Time & MoneyNo Rubber or Plastic Hose to Reduce Flow Largest Inner Diameter for required GPMNo Deformity in Curvature Will Hold BendManufactured to US Military/Aerospace specificationsHighest Quality Construction & MaterialsRe-Usable and Re-BendableStronger & More Flexible Than CopperFalcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/AquafloWill Not Discolor, Corrode Or RustNo Galvanic Effect No Dielectric Union NeededFalcon WarrantyAvailable In Sizes from 3/8" To 2" I.D. In Various Lengths for Most Water Flowing Applications and Appliances All Fittings Chrome Plated Solid BrassWill Not Crimp or Kink Resists Work HardeningBurst Pressure Rated Up To 2200 psiHigh Temp EPDM Washer (40° to 300°F)100% Leak TestedCERTIFICATIONS & LISTINGSIAPMO Certified to NSF ANSI Section 61 IAPMO/UPC Tested and Certified Conforms To ASME A112.18.6ASME A112.18.6 Description: This standard establishes requirements for flexible water connectors in potable water systems under continuous pressure and in accessible location only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identificationCODE REQUIREMENTSSatisfy Inspector & Code Requirements UPC IPC IMC IRC State of Wisconsin L.A. City South Texas etcSEISMIC MOVEMENT In areas of SEISMIC movement using Falcon Stainless connectors will decrease the chances of damage caused by hard-piped copper installations and/or copper connectors cracking and breaking. Ensure Appliance Installation, Performance & WarrantyMany appliance manufacturers require that flexible connectors be used when installing their products or the Warranty is void.Water Flowing Appliances REQUIRE FULL FLOW to ensure appliance operates at the rate for which it was designed.Appliances last longer and operate at optimum performance when maximum flow is obtained. Settling of heavy water appliances, that are hard-piped with copper or CPVC, can damage the installation causing leaks. Using Falcon Stainless connectors will eliminate damage to the connection ensuring a secure installation.Applications & Uses: For Potable Water - Residential & Commercial: Water Heaters: Tankless - Takagi, Bosch, Noritz etc. & Storage Type- Rheem, State, etc. Water Treatment/Purification/Softening: RO, UV, Salt, Owned & Rented, Culligan, Hague, Rayne, Rainsoft, GE Autotrol Bypass & Performa Valve, Zenon, Fleck, Autotrol, Clack etc. SinksToiletsBoilers

more >>
IsoPure Water
$23.49 See It
(SWC-2x18) 2" I.D. x 18" L Stainless Steel Flex Connector with 2" FIP

Benefits & Features304 Series Corrugated Stainless Steel Ease of Installation Saves Time & MoneyNo Rubber or Plastic Hose to Reduce Flow Largest Inner Diameter for required GPMNo Deformity in Curvature Will Hold BendManufactured to US Military/Aerospace specificationsHighest Quality Construction & MaterialsRe-Usable and Re-BendableStronger & More Flexible Than CopperFalcon 3/4" Model Flows 134% More Than Braided Connectors and 17% More Than Copper & 30% More than LSP/AquafloWill Not Discolor, Corrode Or RustNo Galvanic Effect No Dielectric Union NeededFalcon WarrantyAvailable In Sizes from 3/8" To 2" I.D. In Various Lengths for Most Water Flowing Applications and Appliances All Fittings Chrome Plated Solid BrassWill Not Crimp or Kink Resists Work HardeningBurst Pressure Rated Up To 2200 psiHigh Temp EPDM Washer (40° to 300°F)100% Leak TestedCERTIFICATIONS & LISTINGSIAPMO Certified to NSF ANSI Section 61 IAPMO/UPC Tested and Certified Conforms To ASME A112.18.6ASME A112.18.6 Description: This standard establishes requirements for flexible water connectors in potable water systems under continuous pressure and in accessible location only. It covers physical and performance requirements, test methods, materials, connections, and other significant properties, in addition to a general description of materials used. Certain features of construction of the finished product are given, together with the method of marking and identificationCODE REQUIREMENTSSatisfy Inspector & Code Requirements UPC IPC IMC IRC State of Wisconsin L.A. City South Texas etcSEISMIC MOVEMENT In areas of SEISMIC movement using Falcon Stainless connectors will decrease the chances of damage caused by hard-piped copper installations and/or copper connectors cracking and breaking. Ensure Appliance Installation, Performance & WarrantyMany appliance manufacturers require that flexible connectors be used when installing their products or the Warranty is void.Water Flowing Appliances REQUIRE FULL FLOW to ensure appliance operates at the rate for which it was designed.Appliances last longer and operate at optimum performance when maximum flow is obtained. Settling of heavy water appliances, that are hard-piped with copper or CPVC, can damage the installation causing leaks. Using Falcon Stainless connectors will eliminate damage to the connection ensuring a secure installation.Applications & Uses: For Potable Water - Residential & Commercial: Water Heaters: Tankless - Takagi, Bosch, Noritz etc. & Storage Type- Rheem, State, etc. Water Treatment/Purification/Softening: RO, UV, Salt, Owned & Rented, Culligan, Hague, Rayne, Rainsoft, GE Autotrol Bypass & Performa Valve, Zenon, Fleck, Autotrol, Clack etc. SinksToiletsBoilers

more >>
IsoPure Water
$68.98 See It
Search within results