1 to 20 of  28 products for bull float

Result for "bull float"
Lr-308 Upper W/18'''' Cm Bull Barrel - 308 Sportical Barrel Assembly

Ready to install .308/7.62 NATO upper receiver comes fully assembled with bolt/carrier, charging handle, free-float handguard, gas block, and barrel. Lets you change your LR-308 from a sporter to a match rifle or long-range varminter in just minutes—or build a completely new gun customized to your exact needs Beefy, thick-walled receiver of extruded 6066 T6 aluminum is hardcoat anodized to military standards for extra surface strength, with a hard, black Teflon coating to resist scuffs and scratches. Free-floated forend of smooth, rigid machined aluminum gives plenty of air space to protect your hand from a hot barrel during sustained shooting. Includes swivel stud and QD sling swiv Mfg: Dpms SPECS: Receiver/Handguard/Gas Block/Charging Handle – 6066 T6 aluminum, anodized and teflon coated, black. Bolt/Carrier – 4140 steel, parkerized, matte black. Barrel – 4140 chrome-moly steel, parkerized, matte black, or 416 stainless steel, natural finish. Fits DPMS LR-308 lower

more >>
Brownells
$559.99 See It
Lr-308 Upper W/18'''' Cm Bull Barrel - Lr-308 Upper W/16'''' Ap4 Carbine Cm Barrel

Ready to install .308/7.62 NATO upper receiver comes fully assembled with bolt/carrier, charging handle, free-float handguard, gas block, and barrel. Lets you change your LR-308 from a sporter to a match rifle or long-range varminter in just minutes—or build a completely new gun customized to your exact needs Beefy, thick-walled receiver of extruded 6066 T6 aluminum is hardcoat anodized to military standards for extra surface strength, with a hard, black Teflon coating to resist scuffs and scratches. Free-floated forend of smooth, rigid machined aluminum gives plenty of air space to protect your hand from a hot barrel during sustained shooting. Includes swivel stud and QD sling swiv Mfg: Dpms SPECS: Receiver/Handguard/Gas Block/Charging Handle – 6066 T6 aluminum, anodized and teflon coated, black. Bolt/Carrier – 4140 steel, parkerized, matte black. Barrel – 4140 chrome-moly steel, parkerized, matte black, or 416 stainless steel, natural finish. Fits DPMS LR-308 lower

more >>
Brownells
$829.99 See It
Lr-308 Upper W/18'''' Cm Bull Barrel - Lr-308 Oracle Upper Receiver Assembly

Ready to install .308/7.62 NATO upper receiver comes fully assembled with bolt/carrier, charging handle, free-float handguard, gas block, and barrel. Lets you change your LR-308 from a sporter to a match rifle or long-range varminter in just minutes—or build a completely new gun customized to your exact needs Beefy, thick-walled receiver of extruded 6066 T6 aluminum is hardcoat anodized to military standards for extra surface strength, with a hard, black Teflon coating to resist scuffs and scratches. Free-floated forend of smooth, rigid machined aluminum gives plenty of air space to protect your hand from a hot barrel during sustained shooting. Includes swivel stud and QD sling swiv Mfg: Dpms SPECS: Receiver/Handguard/Gas Block/Charging Handle – 6066 T6 aluminum, anodized and teflon coated, black. Bolt/Carrier – 4140 steel, parkerized, matte black. Barrel – 4140 chrome-moly steel, parkerized, matte black, or 416 stainless steel, natural finish. Fits DPMS LR-308 lower

more >>
Brownells
$639.99 See It
Savage 110/111/112/116 Long Action Lss Chassis - Savage La Model 110,111,112,116 Lss Chassis Black

The MDT LSS Chassis provides a lightweight and versatile platform for your Bolt Action Rifle.  This drop-in chassis accepts AICS style detachable magazines.  Machined out of aluminum and hardcoat anodized, the LSS is ready to accept standard AR15 grips and collapsible stocks.  Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability.  Also, with the generous spacing on the handguard, standard and bull barrels will free float easily.  Mounting holes on the forend are compatible with Magpul L5 and L3 rails. Does not accept AR15 grips with beavertail or fixed AR15 stocks.  Savage Mfg: Modular Driven Technologies SPECS: Fits - Accepts AICS style short action magazines (223 & 308).  Construction - aluminum.  Finish - Hard anodized to mil spec type III.  Accepts standard AR15 collapsible stocks.  Does not accept fixed stocks.  Accepts AR15 grips WITHOUT beavertail.  Savage

more >>
Brownells
$449.00 See It
Lr-308 Upper W/18'''' Cm Bull Barrel

Ready to install .308/7.62 NATO upper receiver comes fully assembled with bolt/carrier, charging handle, free-float handguard, gas block, and barrel. Lets you change your LR-308 from a sporter to a match rifle or long-range varminter in just minutes—or build a completely new gun customized to your exact needs Beefy, thick-walled receiver of extruded 6066 T6 aluminum is hardcoat anodized to military standards for extra surface strength, with a hard, black Teflon coating to resist scuffs and scratches. Free-floated forend of smooth, rigid machined aluminum gives plenty of air space to protect your hand from a hot barrel during sustained shooting. Includes swivel stud and QD sling swiv Mfg: Dpms SPECS: Receiver/Handguard/Gas Block/Charging Handle – 6066 T6 aluminum, anodized and teflon coated, black. Bolt/Carrier – 4140 steel, parkerized, matte black. Barrel – 4140 chrome-moly steel, parkerized, matte black, or 416 stainless steel, natural finish. Fits DPMS LR-308 lower

more >>
Brownells
$739.99 See It
10/22 Deluxe Archangel Polymer Target Stock - 10/22 Deluxe Target Stock

Lightweight synthetic thumbhole stock gives your .22 LR 10/22 the ergonomic enhancements of a free-float target stock at an amazingly economical price. Simply transplant your rifle’s barreled action into the Archangel—no permanent modifications, and you can return it to your original stock any time. Reinforced molded polymer is exceptionally strong and highly resistant the effects of temperature, humidity, and impact, while the free-float barrel channel has clearance for all 10/22 barrel contours. “Mirror image” design is fully ambidextrous, so this stock is equally comfortable for right- or left-handed shooters. Adjustable buttplate lets you select any one of 8 lengt Mfg: Pro Mag SPECS: Molded, high-impact polymer, matte black. Length of pull adjustment range: 13½" (34.3cm) to 145/8" (37.1cm). Accepts Ruger® 10/22® .22 LR barreled action with standard or bull barrel. 46 oz. (1.3kg) weight. Mounting hardware included.

more >>
Brownells
$101.99 See It
Remington 700 Left Hand Short Action Lss Chassis - Rem 700 Sa Lss Chassis Black Left Hand

The MDT LSS Chassis provides a lightweight and versatile platform for your Bolt Action Rifle.  This drop-in chassis accepts AICS style detachable magazines.  Machined out of aluminum and hardcoat anodized, the LSS is ready to accept standard AR15 grips and collapsible stocks.  Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability.  Also, with the generous spacing on the handguard, standard and bull barrels will free float easily.  Mounting holes on the forend are compatible with Magpul L5 and L3 rails. Does not accept AR15 grips with beavertail or fixed AR15 stocks.  Remingt Mfg: Modular Driven Technologies SPECS: Fits - Accepts AICS style short action magazines (223 & 308).  Construction - aluminum.  Finish - Hard anodized to mil spec type III.  Accepts standard AR15 collapsible stocks.  Does not accept fixed stocks.  Accepts AR15 grips WITHOUT beavertail.  Remingt

more >>
Brownells
$399.00 See It
Remington 700 Long Action Lss Chassis - Rem 700 La Lss Chassis Black

The MDT LSS Chassis provides a lightweight and versatile platform for your Bolt Action Rifle.  This drop-in chassis accepts AICS style detachable magazines.  Machined out of aluminum and hardcoat anodized, the LSS is ready to accept standard AR15 grips and collapsible stocks.  Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability.  Also, with the generous spacing on the handguard, standard and bull barrels will free float easily.  Mounting holes on the forend are compatible with Magpul L5 and L3 rails.  Available in black or flat dark earth.  Does not accept AR15 grips Mfg: Modular Driven Technologies SPECS: Fits - Accepts AICS style short action magazines (223 & 308).  Construction - aluminum.  Finish - Hard anodized to mil spec type III.  Accepts standard AR15 collapsible stocks.  Does not accept fixed stocks.  Accepts AR15 grips WITHOUT beavertail.

more >>
Brownells
$449.00 See It
Remington 700 Long Action Lss Chassis - Rem 700 La Lss Chassis Fde

The MDT LSS Chassis provides a lightweight and versatile platform for your Bolt Action Rifle.  This drop-in chassis accepts AICS style detachable magazines.  Machined out of aluminum and hardcoat anodized, the LSS is ready to accept standard AR15 grips and collapsible stocks.  Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability.  Also, with the generous spacing on the handguard, standard and bull barrels will free float easily.  Mounting holes on the forend are compatible with Magpul L5 and L3 rails.  Available in black or flat dark earth.  Does not accept AR15 grips Mfg: Modular Driven Technologies SPECS: Fits - Accepts AICS style short action magazines (223 & 308).  Construction - aluminum.  Finish - Hard anodized to mil spec type III.  Accepts standard AR15 collapsible stocks.  Does not accept fixed stocks.  Accepts AR15 grips WITHOUT beavertail.

more >>
Brownells
$449.00 See It
Ar-15/M16 Gas Blocks - Low-Profile, .875'''' Bore Dia., Steel

Aluminum or steel gas blocks give the choices you need to create a custom-built rifle with a mission-specific configuration. Mounts securely to barrel with included setscrews. Clamp-on models squeeze around the barrel as you tighten the side-mounted setscrews. Slip-on models are anchored by setscrews on the underside. Low Profile fits under a free-float handguard and lets you use a longer on carbine-length barrels for a clean, streamlined look with more gripping surface. Extended Nose is like Low-Profile, but with an extended sleeve that covers taper pin holes left by the issue A2-style sight tower. Varmint fits heavy .936" O.D. barrels. Bull Barrel includes a 3-slot, low or high Pica Mfg: Sadlak Industries SPECS: 6061 T6 aluminum, hardcoat anodized, black, or 1018 alloy steel, Parkerized, black. Barrel O.D. measured at gas port. SKU BBL. DIA. LENGTH WIDTH HEIGHT WEIGHT 10

more >>
Brownells
$40.99 See It
Ar-15/M16 Gas Blocks - Low-Profile, Slip-On, Steel

Aluminum or steel gas blocks give the choices you need to create a custom-built rifle with a mission-specific configuration. Mounts securely to barrel with included setscrews. Clamp-on models squeeze around the barrel as you tighten the side-mounted setscrews. Slip-on models are anchored by setscrews on the underside. Low Profile fits under a free-float handguard and lets you use a longer on carbine-length barrels for a clean, streamlined look with more gripping surface. Extended Nose is like Low-Profile, but with an extended sleeve that covers taper pin holes left by the issue A2-style sight tower. Varmint fits heavy .936" O.D. barrels. Bull Barrel includes a 3-slot, low or high Pica Mfg: Sadlak Industries SPECS: 6061 T6 aluminum, hardcoat anodized, black, or 1018 alloy steel, Parkerized, black. Barrel O.D. measured at gas port. SKU BBL. DIA. LENGTH WIDTH HEIGHT WEIGHT 10

more >>
Brownells
$26.99 See It
Ar-15/M16 Gas Blocks - Low-Profile, Clamp, Steel

Aluminum or steel gas blocks give the choices you need to create a custom-built rifle with a mission-specific configuration. Mounts securely to barrel with included setscrews. Clamp-on models squeeze around the barrel as you tighten the side-mounted setscrews. Slip-on models are anchored by setscrews on the underside. Low Profile fits under a free-float handguard and lets you use a longer on carbine-length barrels for a clean, streamlined look with more gripping surface. Extended Nose is like Low-Profile, but with an extended sleeve that covers taper pin holes left by the issue A2-style sight tower. Varmint fits heavy .936" O.D. barrels. Bull Barrel includes a 3-slot, low or high Pica Mfg: Sadlak Industries SPECS: 6061 T6 aluminum, hardcoat anodized, black, or 1018 alloy steel, Parkerized, black. Barrel O.D. measured at gas port. SKU BBL. DIA. LENGTH WIDTH HEIGHT WEIGHT 10

more >>
Brownells
$45.99 See It
Ar-15/M16 Gas Blocks - Low-Profile, .625'''' Bore Dia., Steel

Aluminum or steel gas blocks give the choices you need to create a custom-built rifle with a mission-specific configuration. Mounts securely to barrel with included setscrews. Clamp-on models squeeze around the barrel as you tighten the side-mounted setscrews. Slip-on models are anchored by setscrews on the underside. Low Profile fits under a free-float handguard and lets you use a longer on carbine-length barrels for a clean, streamlined look with more gripping surface. Extended Nose is like Low-Profile, but with an extended sleeve that covers taper pin holes left by the issue A2-style sight tower. Varmint fits heavy .936" O.D. barrels. Bull Barrel includes a 3-slot, low or high Pica Mfg: Sadlak Industries SPECS: 6061 T6 aluminum, hardcoat anodized, black, or 1018 alloy steel, Parkerized, black. Barrel O.D. measured at gas port. SKU BBL. DIA. LENGTH WIDTH HEIGHT WEIGHT 10

more >>
Brownells
$34.99 See It
FP18-15BD Pump, Automatic Float Switch for Submersible Pumps with Piggyback Plug

Product Information:About the Flotec FP1815BD Automatic Float Switch for Submersible Pumps with Piggyback PlugUse the Flotec FP1815BD to provide automatic operation for submersible pumps. This float switch and piggyback plug can be used with both Flotec utility pumps and submersible sump pumps and can be easily installed in no time at all. Yoursquo;ll love saving yourself headaches with the simple set up process that this practical tool gives you. The Flotec FP1815BD provides you with the ease and durability that you need and the excellent features that you want.Not only will you enjoy the easy installation that comes with this product, but yoursquo;ll also love the longlasting qualities that it possesses. The Flotec FP1815BD is made from highquality materials that make it strong and reliable. An adjustable on/off switch, mounting screw, 10 foot long power cord and tether strap make using this product easy and yoursquo;ll enjoy never needing to replace it. For performance and convenience, the Flotec 1815 is just what you need.Features:bull; For use with Flotec Submersible Sump Pumps and Utility Pumpsbull; Easy Installationbull; Fits Submersible/Pedestal thru 1/2 HPbull; Adjustable On/Off Switchbull; Tether Strap and Mounting Screw Includedbull; 10 Foot Power Cordbull; Switch may be used for up to 1/2 HP, 13 AMP Maximum service load 120 VoltsSpecifications:bull; Order #: FP1815BD bull; Power Cord Length: 10' bull; Piggyback Electrical Plug Allows Simple Electrical Connection bull; Works With Many Brands and Models of Submersible Sump Pump bull; Requires 18" of water to activate

more >>
Westside Wholesale
$31.90 See It
Tilting Bull Float Bracket (6-hole) alum. Model: CC294

Tilting Bull Float Bracket, 6-hole, Construction Cast Aluminum, Characteristics One To One Turning Ratio Of Handle And Pitch Of Blade, For Use With 2 Or 4-hole Floats, Mfg. No. Cc750-01, Cc749-01, Cc044-01, Cc045-01, Cc046-01

more >>
Grainger
$93.20 See It
Bull Float Bracket (6-hole) cast Aluminum. Model: CC296

Bull Float Bracket, 6-hole, Construction Cast Aluminum, Characteristics One To One Turning Ratio Of Handle And Pitch Of Blade, For Use With 2 Or 4-hole Floats, 1-3/4 In. Or 1-3/8 In. Button Handles

more >>
Grainger
$98.25 See It
Tikka T3 Lss Chassis - Tikka T3 Lss Chassis Black

The MDT LSS Chassis provides a lightweight and versatile platform for your Bolt Action Rifle.  This drop-in chassis accepts AICS style detachable magazines.  Machined out of aluminum and hardcoat anodized, the LSS is ready to accept standard AR15 grips and collapsible stocks.  Rifle receiver will only make contact with the chassis on the V-Shape bedding and recoil lug area, ensuring high accuracy and repeatability.  Also, with the generous spacing on the handguard, standard and bull barrels will free float easily.  Mounting holes on the forend are compatible with Magpul L5 and L3 rails. Does not accept AR15 grips with beavertail or fixed AR15 stocks.   &nbs Mfg: Modular Driven Technologies SPECS: Fits - Accepts AICS style short action magazines (223 & 308).  Construction - aluminum.  Finish - Hard anodized to mil spec type III.  Accepts standard AR15 collapsible stocks.  Does not accept fixed stocks.  Accepts AR15 grips WITHOUT beavertail.

more >>
Brownells
$399.00 See It
Bull Float Bracket (4-hole) cast Aluminum. Model: CC800

Bull Float Bracket, 4-hole, Construction Cast Aluminum, For Use With 1-1/4, 1-1/2 Or 1-3/4 In. Threaded Extension Handles, 4-hole Floats And Fresnos, Mfg. No. Cc802-01, Cc803-01, Cc804-01

more >>
Grainger
$27.10 See It
Qlt By Marshalltown Bull Float Bracket (1-3/8) 1-3/4 Snap Hndl. Model: BF9

Bull Float Bracket, Characteristics Allows Multi-angle Floating, Full Pitch Controlled By Half Turn Of Handle, Application Used To Connect Bull Float To Handle, For Use With Magnesium Bull Floats Without Adapters, Fits 1-3/8 In. And 1-3/4 In. Snap Handles Without Adapters

more >>
Grainger
$95.15 See It
Mens Ox & Bull Trading Co. Striped Cufflinks Floating Lapis/mother Of Pearl

FREE SHIPPING Orders $50+

These sophisticated Striped Cufflinks are constructed with a silver-plated base metal.

more >>
Overstock Main
$54.95 See It
Search within results