1 to 12 of  12 products for co2 rifle bb guns

No exact matches found for co2 rifle bb guns

12 similar items found

Ar-15/M16 ''''smooth'''' Free Float Handguard - Smooth Forearm Top Rail, Rifle

Lightweight, machined aluminum forearm combines the accessory mounting versatility of a quad-railed forearm with a "smooth," un-railed area for support hand comfort to aid in enhanced weapon control. Integral, full-length Picatinny top rail, plus forward 2.5" rails on the sides and bottom, offer plenty of attachment space for lights, lasers, optics, backup sights, and other accessories. Modular design accepts a variety of bolt-on YHM accessories, available below. Smooth areas are drilled and tapped to accept Add-On Rails for additional accessory mounting options. Side and bottom rails have receptacles for Threaded Swivel Studs; RIFLE version also accepts YHM Forearm End C Mfg: Yankee Hill Machine Co., Inc. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Carbine 9¼" (23.5cm) OAL, 2½" (6.4cm) diameter. 12.4 oz. (352g) weight. Fits AR-15/M16 with carbine-length gas system. Rifle 12½" (31.8cm) OAL, 2½" diameter. 16.6 oz. (471

more >>
Brownells
$146.39 See It
Ar-15/M16 Diamond-Pattern Free-Float Handguards - Diamond Series Handguard, Rifle

Diamond-shaped vents in a unique, latticework pattern give your weapon a distinctive look and provide superb airflow to prevent barrel from overheating. Helps keep your hand cool, too, while reducing weapon's overall weight. Provides four, full-length Picatinny rails for maximum flexibility in mounting tactical accessories. Four, full-length Picatinny rails provide maximum flexibility in mounting tactical accessories. Machined from high-grade 6061 T6 aluminum and mil-spec hardcoat anodized to withstand combat and heavy-duty usage. Extended top rail gives a gap-free fit to receiver rail. Slots are marked alphanumerically to help identify accessory locations. Threaded front end accepts Mfg: Yankee Hill Machine Co., Inc. SPECS: 6061 T6 aluminum, mil-spec hardcoat anodized, matte black. Carbine 7¼" (23.5cm) OAL, 2½" (6.4cm) dia. 12.5 oz. (354g) weight. Fits AR-15/M16 with carbine-length gas system. Mid-Length 9¼" (23.5cm) OAL, 2½" dia. 15.2 oz. (431g)

more >>
Brownells
$160.70 See It
Ar-15/M16 Gas Block - Single-Rail Gas Block W/Lug & Swivel

Unique, all-steel gas blocks expand the versatility of your rifle by providing a variety of accessory rail and handguard mounting options. Especially helpful in customizing short-barrelled tactical rifles. Machined from bar stock for extra strength and rigidity, then mil-spec Parkerized for exceptional wear- and corrosion-resistance. One-piece, 4-Rail model features top/bottom and side rails that accept Weaver or Picatinny mounted, tactical accessories, including the Yankee Hill Gas Block Front Flip Sight. Secures to barrel with included setscrews. Low Profile version is a low and narrow, one-piece block designed to fit inside most free-float handguards; allows use of rifle length forearm Mfg: Yankee Hill Machine Co., Inc. SPECS: Steel, mil-spec phosphate finish. Unless otherwise noted, fits .750" diameter barrels. 4-Rail - 1-7/8" (4.8cm) long, 1-1/4" (3.2cm) wide, 1-3/4" (4.4cm) high. 5.7 oz. (162 g) wt. 2-Rail - 1-3/4" long, 1-1/4" wide, 1-3/4&quot

more >>
Brownells
$71.30 See It
Ar-15/M16 Gas Block - Low Profile Gas Block Slotted

Unique, all-steel gas blocks expand the versatility of your rifle by providing a variety of accessory rail and handguard mounting options. Especially helpful in customizing short-barrelled tactical rifles. Machined from bar stock for extra strength and rigidity, then mil-spec Parkerized for exceptional wear- and corrosion-resistance. One-piece, 4-Rail model features top/bottom and side rails that accept Weaver or Picatinny mounted, tactical accessories, including the Yankee Hill Gas Block Front Flip Sight. Secures to barrel with included setscrews. Low Profile version is a low and narrow, one-piece block designed to fit inside most free-float handguards; allows use of rifle length forearm Mfg: Yankee Hill Machine Co., Inc. SPECS: Steel, mil-spec phosphate finish. Unless otherwise noted, fits .750" diameter barrels. 4-Rail - 1-7/8" (4.8cm) long, 1-1/4" (3.2cm) wide, 1-3/4" (4.4cm) high. 5.7 oz. (162 g) wt. 2-Rail - 1-3/4" long, 1-1/4" wide, 1-3/4&quot

more >>
Brownells
$32.99 See It
Ar-15/M16/Ar-Style .308 Muzzle Thread Protectors - 1-2''''-28, .920'''' O.D, Bull

Prevent unwanted and expensive damage to your rifle's muzzle threads and crown with easy-to-install thread protectors. Knurled exterior gives you a firm grasp to install or remove the protector in seconds. Available in popular thread sizes and diameters to match most commonly available rifle barrels. Mfg: Yankee Hill Machine Co., Inc. SPECS: Stainless steel, silver finish, except FAL, black finish. ½ oz. (14g) wt. 9/16-24 FAL model are LEFT HAND threads.

more >>
Brownells
$13.50 See It
Ar-15/M16/Ar-Style .308 Muzzle Thread Protectors - 1-2''''-28, .720'''' O.D, Standard

Prevent unwanted and expensive damage to your rifle's muzzle threads and crown with easy-to-install thread protectors. Knurled exterior gives you a firm grasp to install or remove the protector in seconds. Available in popular thread sizes and diameters to match most commonly available rifle barrels. Mfg: Yankee Hill Machine Co., Inc. SPECS: Stainless steel, silver finish, except FAL, black finish. ½ oz. (14g) wt. 9/16-24 FAL model are LEFT HAND threads.

more >>
Brownells
$13.50 See It
Ar-15/M16/Ar-Style .308 Muzzle Thread Protectors - 1/2''''-28, .635'''' O.D, Pencil

Prevent unwanted and expensive damage to your rifle's muzzle threads and crown with easy-to-install thread protectors. Knurled exterior gives you a firm grasp to install or remove the protector in seconds. Available in popular thread sizes and diameters to match most commonly available rifle barrels. Mfg: Yankee Hill Machine Co., Inc. SPECS: Stainless steel, silver finish, except FAL, black finish. ½ oz. (14g) wt. 9/16-24 FAL model are LEFT HAND threads.

more >>
Brownells
$13.50 See It
Ar-15/M16 Gas Block - .750 Diameter Single Rail Gas Block

Unique, all-steel gas blocks expand the versatility of your rifle by providing a variety of accessory rail and handguard mounting options. Especially helpful in customizing short-barrelled tactical rifles. Machined from bar stock for extra strength and rigidity, then mil-spec Parkerized for exceptional wear- and corrosion-resistance. One-piece, 4-Rail model features top/bottom and side rails that accept Weaver or Picatinny mounted, tactical accessories, including the Yankee Hill Gas Block Front Flip Sight. Secures to barrel with included setscrews. Low Profile version is a low and narrow, one-piece block designed to fit inside most free-float handguards; allows use of rifle length forearm Mfg: Yankee Hill Machine Co., Inc. SPECS: Steel, mil-spec phosphate finish. Unless otherwise noted, fits .750" diameter barrels. 4-Rail - 1-7/8" (4.8cm) long, 1-1/4" (3.2cm) wide, 1-3/4" (4.4cm) high. 5.7 oz. (162 g) wt. 2-Rail - 1-3/4" long, 1-1/4" wide, 1-3/4&quot

more >>
Brownells
$59.70 See It
Ar-15/M16 ''''smooth'''' Free Float Handguard - Smooth Forearm Top Rail, Carbine

Lightweight, machined aluminum forearm combines the accessory mounting versatility of a quad-railed forearm with a "smooth," un-railed area for support hand comfort to aid in enhanced weapon control. Integral, full-length Picatinny top rail, plus forward 2.5" rails on the sides and bottom, offer plenty of attachment space for lights, lasers, optics, backup sights, and other accessories. Modular design accepts a variety of bolt-on YHM accessories, available below. Smooth areas are drilled and tapped to accept Add-On Rails for additional accessory mounting options. Side and bottom rails have receptacles for Threaded Swivel Studs; RIFLE version also accepts YHM Forearm End C Mfg: Yankee Hill Machine Co., Inc. SPECS: Aluminum, mil-spec hardcoat anodized, matte black. Carbine 9¼" (23.5cm) OAL, 2½" (6.4cm) diameter. 12.4 oz. (352g) weight. Fits AR-15/M16 with carbine-length gas system. Rifle 12½" (31.8cm) OAL, 2½" diameter. 16.6 oz. (471

more >>
Brownells
$129.80 See It
Ar-15/M16 Rapid Transition Sights - Rapid Transition Sights

Machined aluminum backup sights mount at a 45° offset angle to enable instant transition from primary optic simply by tilting the rifle. Rear sight mounts on receiver rail, front sight on handguard top rail. Can be installed on the left or right side of receiver, and eliminates the need to co-witness backup sights through your optic. Provides the same bore height and sight picture as standard USGI A2 sights. A2-style rear sight has flip-up long- and short-range apertures, and is adjustable for windage and elevation in ½ MOA clicks. Locking bar and crossbolt attachment system clamps securely to MIL-STD 1913 Picatinny rails and sits only .20" above the rail, so there's no Mfg: Dueck Defense SPECS: 7075 aluminum, hardcoat anodized, black. Front 1 3/8" (3.5cm) long, 3" (7.6cm) wide. 3.1 oz. (88g) weight. Rear 1" (2.5cm) long, 2¾" (7cm) wide. 1.5 oz. (43g) weight.

more >>
Brownells
$199.99 See It
Ar-15/M16 Gas Block - Specter Gas Block

Unique, all-steel gas blocks expand the versatility of your rifle by providing a variety of accessory rail and handguard mounting options. Especially helpful in customizing short-barrelled tactical rifles. Machined from bar stock for extra strength and rigidity, then mil-spec Parkerized for exceptional wear- and corrosion-resistance. One-piece, 4-Rail model features top/bottom and side rails that accept Weaver or Picatinny mounted, tactical accessories, including the Yankee Hill Gas Block Front Flip Sight. Secures to barrel with included setscrews. Low Profile version is a low and narrow, one-piece block designed to fit inside most free-float handguards; allows use of rifle length forearm Mfg: Yankee Hill Machine Co., Inc. SPECS: Steel, mil-spec phosphate finish. Unless otherwise noted, fits .750" diameter barrels. 4-Rail - 1-7/8" (4.8cm) long, 1-1/4" (3.2cm) wide, 1-3/4" (4.4cm) high. 5.7 oz. (162 g) wt. 2-Rail - 1-3/4" long, 1-1/4" wide, 1-3/4&quot

more >>
Brownells
$38.80 See It
Ar-15/M16 Gas Block - Low Profile Gas Block Assy

Unique, all-steel gas blocks expand the versatility of your rifle by providing a variety of accessory rail and handguard mounting options. Especially helpful in customizing short-barrelled tactical rifles. Machined from bar stock for extra strength and rigidity, then mil-spec Parkerized for exceptional wear- and corrosion-resistance. One-piece, 4-Rail model features top/bottom and side rails that accept Weaver or Picatinny mounted, tactical accessories, including the Yankee Hill Gas Block Front Flip Sight. Secures to barrel with included setscrews. Low Profile version is a low and narrow, one-piece block designed to fit inside most free-float handguards; allows use of rifle length forearm Mfg: Yankee Hill Machine Co., Inc. SPECS: Steel, mil-spec phosphate finish. Unless otherwise noted, fits .750" diameter barrels. 4-Rail - 1-7/8" (4.8cm) long, 1-1/4" (3.2cm) wide, 1-3/4" (4.4cm) high. 5.7 oz. (162 g) wt. 2-Rail - 1-3/4" long, 1-1/4" wide, 1-3/4&quot

more >>
Brownells
$23.99 See It
Search within results
  • Find by Price
    • $ to $