Antenna - Height: 3.8" - Application/Usage: Radio Communication - Impedance: 50 Ohm - Diameter: 1.5" - Frequency: 2.32 GHz to 2.33 GHz - Antenna Gain: 34 dB - Frequency Band Type: UHF
Antenna - Application/Usage: Vehicle - Connector Type: RCA
Antenna - Limited Warranty: 1 Year - Application/Usage: Radio Communication
TEMP-FLEX-35 LOW TEMP ADAPTOR CORD Temp-Flex-35 was developed to meet the demands of contractors for a super flexible vinyl cord set. Specially formulated SJTW vinyl outer jacket won't crack or break, even at temperatures as low as -35° F. Highly visible yellow color for safety. This adaptor converts any 20A Twist to lock extension cord to a 15A standard straight blade cord. Heavy Duty round Yellow 600V. See picture for exact configuration. Made in the USA
The Leviton C6851-25W is the nickel plated coax cable. This model comes in white color. The cable is 25-feet long. This item includes pre-terminated F-connectors. Is available in 3FT, 6FT, 15FT, 25FT, 50FT and 100FT. The Leviton C6851-25W is made to carry RF signals throughout a home or office....
Pocket size coax stripper for RG-58, 59, 62, 6, 6QS and 3C2V cables. Finger ring design strips cable easlly. For RG-58, 59, 62, 6, 6QS and 3C2V cables Finger ring design strips cable easlly.
solid silver conductor, active Dielectric Bias System eliminates cable "break in" period for consistent performance, two layers of hard-cell foam insulation, with EMI and RFI shielding
The coax crimper and cutter is made of carbon steel and black electrophoresis finishIt features dual grounded cutting blades and easy-to-read laser etched markingCrimps RG-59 and RG-6 F connectors and 18 AWG wireNons
Plastic Fiber Optics Accessories Banner Engineering Universal Plastic Fiber Adapters; Use To Adapt Plastic Fiber Optic Cables With Outside Jacket Diameter of 1.0 mm (100 Pieces)
Antenna - Height: 12.3" - Application/Usage: Cell Phone - Impedance: 50 Ohm - Antenna Gain: 6.1 dBi - Connector Type: FME - Frequency Band Type: UHF - Number of Connectors: 1
Fix pixel display problems including missing lines, missing pixels, faded or distorted pixels, and burnt out bulbs. The replacement pixel cable should be installed by an experienced professional by using a 30 Watt soldering iron with a T-Tip adapter and rubber cable. Instructions are not included with the cable and you should check to see whether your SAAB 9-3 or SAAB 9-5 requires a SID1 or SID2 cable prior to purchasing.
Coax taps are used when one source needs to feed multiple devices in the same location. This signal port coax tap has one feed through port and a one tap port. The feed through port typically will go to the next coax tap in the line. The tap port will be used for the device. Features: 75 Ohm Tap Value: 6dB Frequency Range: 5-1000MHz Tap Loss: 6 +/- 1.5dB Insertion Loss: 2.6dB Isolation out to tap: 20dB Return Loss: 15dB All Ports F-type Female A/V & PC Equipment > Satellite / Antenna Hardware > Taps, A/V & PC Equipment > Satellite / Antenna Hardware > Taps 3240
USGLOBALSAT Cable Set
Coax splitter 4 way
The Kovea 2 way Adapter is for connecting multiple Kovea products to butane canisters
(150 count) Never waste time untangling cords again, thanks to this soft, smart cable protector. Easy to use:Just stretch the sleeve over headphone or gadget cables and release Soft and customizable:Soft silicone is easy to adapt to your needed length Just the right size:10-1/4 long x 5/8 w ¦
Venture Heated Clothing 12V Splitter For Gloves & Insoles The 12V Coax Y Splitter allows you to connect either your heated gloves or heated insoles to your battery harness. This configuration allows you to wear either your heated gloves or your heated insoles on their own without connecting to any other heated gear options. The 12V Splitter For Gloves & Insoles is compatible with: VentureHeat 12V Heated Leather Gloves VentureHeat 12V Heated Glove Liners VentureHeat 12V Heated Insoles
Comes in bags of 10 each.
Raymarine SeaTalk to SeaTalkNG Adapter Cable, Adapter Cable SeatalkNG to SeaTalk 2, Part Number: A06048, One Connection Needed Per Network