1 to 20 of  92 products for comfort heat heating pad king size 12 x 24

No exact matches found for comfort heat heating pad king size 12 x 24

92 similar items found

31556 DryConn King 6 Yellow Wire Connector

Same reliable King 6 wire connector in in bright yellow color. Prefilled with non-hardening dielectric silicone, to protect splice from dirt, water vapors, and condensation. Listed UL 486D as a sealed wire connector system; for use in damp, wet, rain tight, direct bury, and submersible locations. One-step installation, no pretwisting required. Resists damage from water and corrosion. Sold As: Bag of 10. Wire Range: #22 to #8. Connector Size: 2.00 x 0.81 inches. Type: Direct Bury, Waterproof, Copper/Copper. Temperature Rating: 221 degrees F. Silicone Sealant Temp: -45 to 400 degrees. Max Voltage: 600V building wire, 1000V signs or luminaries. Color: Orange. Company: King Innovation. (King Innovation 31556)

more >>
homelectrical
$10.71 See It
72010 Extra Small King Shrink Crimp

Crimp style connectors with waterproof heat shrinks are for use in low voltage lighting applications. Apply heat shrink crimp connectors to well pump connections. The heat shrink surrounds a splice, making it waterproof and corrosion proof, while clear heat shrink allows for visible splice examination. These connectors are resistant to harsh outdoor elements, allowing for maximum durability. Max. Voltage: 125 Volts. Wire Type: Stranded Copper. (King Innovation 72010)

more >>
homelectrical
$13.78 See It
10066 Wire Harness Connector Kit,90 Pc

$25+ Orders Ship Free

Wire Harness Connector Kit, Kit Type Crimp, Solder, and Seal, Terminal Type Connector, Number of Pieces 90, Includes (14) Assorted Sizes of Insulated Connectors in Plastic Case with Space for Heat Tool

more >>
Zoro
$114.75 See It
25260 King 6-Ft Power Cord

Six foot long King power cord to be used with irrigation controllers. Three prong style plug at 90 degree angle, with three count 16 gauge stranded wire (green, white, and black). Wires are inserted into three prong plug at a 90 degree angle to allow cords to fit in tight areas, while being out of the way. UL listed. For indoor use only. Sold As: Each. Size: 6 feet. Type: 3 Prong. Company: King Innovation. (King Innovation 25260)

more >>
homelectrical
$4.02 See It
Motorcycle NAMZ Custom Cycle 4" Throttle by Wire Extension Kit

All the items needed to extend a set of OEM handlebar switch wires Includes both male and female terminals crimped on each end, and heat shrink Wires match factory color codes Made in the USA

more >>
J&P Cycles
$37.99 See It
1663323 - Phoenix Contact-1663323-HC-M-12-MOD-BU

Electrical characteristicsAmbient temperature (operation): -40 °C ... 125 °C (including heating up of contacts)Note: For housing HC-B6 to B48, for housing HC-ADVANCE-B6 to B24, hinged retaining frame HC-M-MHR... necessary, crimp contacts CK1,6-ED... (crimp contacts not in scope of supply)Number of positions: 12Rated current: 10 ARated surge voltage: 3 kVRated voltage (III/3): 250 VGeneral characteristicsAssembly instructions: Housing height ? 52 mm.Plug-in connections may only be operated only when there is no load/voltage.Connection method: Crimp connectionInflammability class according to UL 94: V0Number of module slots: 1Pollution degree: 3Series: HC-M-12Surge voltage category: IIIMaterial dataContact material: Copper alloyContact surface material: Ag (alternatively Au)Mechanical characteristicsConductor cross section: 0.14 mm² ... 2.5 mm²Connection cross section AWG: 26 ... 14Insertion/withdrawal cycles: ? 500Stripping length of the individual wire: 8 mm (6 mm (for 2.5 mm2))

more >>
BW Rogers Co
$4.73 See It
5884 Color King VHF UHF FM TV Antenna (5884)

The Color King 5884 is a great choice for those 25-60 miles away from the broadcast towers. Get dozens of free channels and add over-the-air channels to your cable or satellite service.

more >>
SolidSignal.com
$35.99 See It
1605255 - Phoenix Contact-1605255-HC-B 24-ESTZZ

Electrical characteristicsRated current: 16 ARated surge voltage: 6 kVRated voltage (III/3): 500 VGeneral dataAmbient temperature (operation): -40 °C ... 125 °C (including heating up of contacts)Assembly instructions: For housing h ? 72 mm. Connectors may be operated only when there is no load/voltage.Conductor cross section: 0.14 mm² ... 2.5 mm²Connection: For housings of type B16/B32. Connectors may only be actuated when there is no load/voltage.Connection cross section AWG: 26 ... 14Connection method: Spring-cage connectionDesign: B24Insertion/withdrawal cycles: ? 500Note: For housing HC-B24Number of positions: 24Pollution degree: 3Stripping length of the individual wire: 10 mm ± 1 mmSurge voltage category: IIIMaterial dataContact carrier material: PCContact material: Copper alloyContact surface material: AgInflammability class according to UL 94: V0

more >>
BW Rogers Co
$114.14 See It
10555 DryConn King 5 Red Wire Connector

Listed UL 486D as a sealed wire connector system. For use in damp, wet, rain tight, direct bury, and submersible locations. One-step installation, no pre-twisting required. Rated for all underground direct bury applications. Water and corrosion proof. Pre-filled with non-hardening silicone sealant, to protect splices from dust, condensation, and water vapors. Sold As: Bag of 10. Max Voltage: 600V building wire, 1000V signs/luminaries. Wire Range: #14 to #10. Wire Type: Copper/copper. Company: King Innovation. (King Innovation 10555)

more >>
homelectrical
$10.25 See It
1647420 - Phoenix Contact-1647420-HC-B 24-EBUZZ

Electrical characteristicsRated current: 16 ARated surge voltage: 6 kVRated voltage (III/3): 500 VGeneral dataAmbient temperature (operation): -40 °C ... 125 °C (including heating up of contacts)Assembly instructions: For housing h ? 72 mm. Connectors may be operated only when there is no load/voltage.Conductor cross section: 0.14 mm² ... 2.5 mm²Connection: For housings of type B16/B32. Connectors may only be actuated when there is no load/voltage.Connection cross section AWG: 26 ... 14Connection method: Spring-cage connectionDesign: B24Insertion/withdrawal cycles: ? 500Note: For housing HC-B24Number of positions: 24Pollution degree: 3Stripping length of the individual wire: 10 mm ± 1 mmSurge voltage category: IIIMaterial dataContact carrier material: PCContact material: Copper alloyContact surface material: AgInflammability class according to UL 94: V0

more >>
BW Rogers Co
$114.14 See It
1584334 - Phoenix Contact-1584334-HC-D 7-I-CT-M

Electrical characteristicsRated current: 10 ARated surge voltage: 4 kVRated voltage (III/3): 250 VGeneral dataAmbient temperature (operation): -40 °C ... 125 °C (including heating up of contacts)Assembly instructions: Connectors may be operated only when there is no load/voltage.Conductor cross section: 0.14 mm² ... 2.5 mm²Connection: The inserts may only be used in plastic housing at voltages > 42 V, as it is not possible to establish a connection between the protective conductor and housing. Product already includes one IP65 sealing screw.Connection cross section AWG: 26 ... 14Connection in acc. with standard: IEC / ENConnection method: Crimp connectionConstructional and testing regulations: DIN VDE 0627/86Constructional and testing regulations: DIN VDE 0110/02.79Constructional and testing regulations: DIN VDE 0110-1/04.97Constructional and testing regulations: IEC 60664-1, DIN IEC 60512Constructional and testing regulations: IEC 60352Design: D7Insertion/withdrawal cycles: ? 500Note: For contact inserts HC-D7, D8, A3, A4, B5, HS2-D7Number of positions: 7Pollution degree: 3Stripping length of the individual wire: 8 mmStripping length of the individual wire: 6 mm (2.5 mm2)Surge voltage category: IIIMaterial dataContact carrier material: PAContact material: Copper alloyContact surface material: Ag (alternatively Au)Inflammability class according to UL 94: V0

more >>
BW Rogers Co
$3.93 See It
1584402 - Phoenix Contact-1584402-HC-D 25-I-CT-F

Electrical characteristicsRated current: 10 ARated surge voltage: 4 kVRated voltage (III/3): 250 VGeneral dataAmbient temperature (operation): -40 °C ... 125 °C (including heating up of contacts)Assembly instructions: - Use of HC-CST (1676857) keying pins and HC-CBU (1676860) keying sockets has been prescribed.Conductor cross section: 0.14 mm² ... 2.5 mm²Connection: Connectors may be plugged in only when there is no load/voltage.Connection cross section AWG: 26 ... 14Connection in acc. with standard: IEC / ENConnection method: Crimp connectionConstructional and testing regulations: DIN VDE 0627/86Constructional and testing regulations: DIN VDE 0110/02.79Constructional and testing regulations: DIN VDE 0110-1/04.97Constructional and testing regulations: IEC 60664-1, DIN IEC 60512Constructional and testing regulations: IEC 60352Design: D25Insertion/withdrawal cycles: ? 500Note: For HEAVYCON housing type D25, CK1,6-ED crimp contacts (crimp contacts not supplied as standard)Number of positions: 25Pollution degree: 3Stripping length of the individual wire: 8 mmStripping length of the individual wire: 6 mm (2.5 mm2)Surge voltage category: IIIMaterial dataContact carrier material: PAContact material: Copper alloyContact surface material: Ag (alternatively Au)Inflammability class according to UL 94: V0

more >>
BW Rogers Co
$12.50 See It
67025 Blue Wire Nut Connector, Pack of 100

King Innovation Blue Wire Nut Connectors provide easy installation, with no pre-twisting required, for conventional copper/copper dry splicing. Suitable for dry applications only, ideal for indoor applications for both indoor and commercial installations. Polycarbonate shell provides protection from electrical fires and appliance failure. Max Voltage. : 300V. Wire Range. (Min/Max): #22/#14. Max Temp Rating. : 105 C(221 F). Wire Type. : Copper/Copper. (King Innovation 67025)

more >>
homelectrical
$1.79 See It
1679524 - Phoenix Contact-1679524-HC-D 25-EBUC-R

Electrical characteristicsRated current: 10 ARated surge voltage: 4 kVRated voltage (III/3): 250 VGeneral dataAmbient temperature (operation): -40 °C ... 125 °C (including heating up of contacts)Assembly instructions: - Use of HC-CST (1676857) keying pins and HC-CBU (1676860) keying sockets has been prescribed.Conductor cross section: 0.14 mm² ... 1.5 mm²Connection: Connectors may be plugged in only when there is no load/voltage.Connection cross section AWG: 26 ... 16Connection in acc. with standard: IEC / ENConnection method: Crimp connectionConstructional and testing regulations: DIN VDE 0627/86Constructional and testing regulations: DIN VDE 0110/02.79Constructional and testing regulations: DIN VDE 0110-1/04.97Constructional and testing regulations: IEC 60664-1, DIN IEC 60512Constructional and testing regulations: IEC 60352Design: D25Insertion/withdrawal cycles: ? 500Note: For HEAVYCON housing of type D25/50, crimp contacts CK1,6-ER / CK1,6-BR (crimp contacts not included in the scope of supply)Number of positions: 25Pollution degree: 3Stripping length of the individual wire: 3 mm +0,5 (0.14 mm2 ... 0.5 mm2)Stripping length of the individual wire: 3.5 mm +1,0 (0.5 mm2 ... 1.5 mm2)Surge voltage category: IIIMaterial dataContact carrier material: PCContact material: Copper alloyContact surface material: Ag (alternatively Au)Inflammability class according to UL 94: V0

more >>
BW Rogers Co
$14.77 See It
991967-000 - Tools and Supplies

Heavy Duty Hot-Air Heating Tool Reflector

Onlinecomponents.com
$46.70 See It
67061 Black Wire Nut Connector, Pack of 1000

King Innovation Wire Nut Connectors are designed to connect and eliminate loose wires that could potentially cause appliance failure or electrical fires. The hi-temp black nut connector is designed for dry applications in both commercial and residential installations with steel plated springs and flame resistant housing. The black nut connector is designed for conventional copper/copper dry splices. They have a max voltage of 300V and max temperature rating of 150 Celsius (302 Fahrenheit). Wire Range. (Min/Max): #22/#18 . Wire Type. : Copper . Max Temperature. : 150 C (302 F). Easy to Install. : No pre-twisting required . (King Innovation 67061)

more >>
homelectrical
$34.83 See It
1587726 - Phoenix Contact-1587726-HC-M-08-GBIT-BUC

Electrical characteristicsAmbient temperature (operation): -40 °C ... 85 °C (including heating up of contacts)Number of positions: 8Rated current: 5 ARated surge voltage: 0.8 kVRated voltage (III/3): 50 VGeneral characteristicsAssembly instructions: For VS-94-F/... cables (Order No. 1416457).Connection: The crimp contacts with Order No. 1688997 should be used. The crimping pliers with Order No. 1205448 should be used.Connection method: Crimp connectionInflammability class according to UL 94: V0Number of module slots: 1Pollution degree: 3Series: HC-M-08-GBITSurge voltage category: IIIMechanical characteristicsConductor cross section: 0.09 mm² ... 0.5 mm²Connection cross section AWG: 28 ... 20External cable diameter: 5 mm ... 7 mmInsertion/withdrawal cycles: ? 500Stripping length of the individual wire: 3.8 mm

more >>
BW Rogers Co
$31.45 See It
991965-000 - Tools and Supplies

Heavy Duty Hot-Air Heating Tool Reflector

Onlinecomponents.com
$69.17 See It
1584143 - Phoenix Contact-1584143-HC-DD108-I-CT-F-216

Electrical characteristicsRated current: 10 ARated surge voltage: 4 kVRated voltage (III/3): 250 VGeneral dataAmbient temperature (operation): -40 °C ... 125 °C (including heating up of contacts)Assembly instructions: -Housing heights with h >= 72 mm are recommended in the case of a large number of wires.-Use of HC-CST (1676857) keying pins and HC-CBU (1676860) coding sockets has been prescribed.Conductor cross section: 0.14 mm² ... 2.5 mm²Connection: Connectors may be plugged in only when there is no load/voltage.Connection cross section AWG: 26 ... 14Connection in acc. with standard: IEC / ENConnection method: Crimp connectionConstructional and testing regulations: DIN VDE 0627/86Constructional and testing regulations: DIN VDE 0110/02.79Constructional and testing regulations: DIN VDE 0110-1/04.97Constructional and testing regulations: IEC 60664-1, DIN IEC 60512Constructional and testing regulations: IEC 60352Design: B24Insertion/withdrawal cycles: ? 500Note: For HEAVYCON ADVANCE and HEAVYCON housing of B24 type, crimp contacts CK 1,6-ED (crimp contacts not included in the scope of supply). Plug-in connections may only be operated only when there is no load/voltage.Number of positions: 108Pollution degree: 3Stripping length of the individual wire: 8 mm (6 mm (2.5 mm²))Stripping length of the individual wire: 6 mm (2.5 mm2)Surge voltage category: IIIMaterial dataContact carrier material: PAContact material: Copper alloyContact surface material: Ag (alternatively Au)Inflammability class according to UL 94: V0

more >>
BW Rogers Co
$28.79 See It
67111 Blue Wing Wire Nut Connector, Pack of 100

King Innovation Blue Winged Wire Nut Connectors are for use in dry applications only, suitable for indoor commercial and residential installations and designed for conventional copper/copper dry splicing. Quick install with no pre-twisting required and winged design provides comfort during application. Protective polycarbonate shells prevent electrical fire or appliance failure. Max Voltage. :600V. Wire Range. (Min/Max):#14/#6. Max Temp Range. :105 C(221 F). Wire Type. :Copper/Copper. (King Innovation 67111)

more >>
homelectrical
$11.19 See It
Search within results

Popular queries