1 to 11 of  11 products for custom scope mounts

Result for "custom scope mounts"
Two-Piece Mount Base - Gloss

Experience vastly superior optical quality If youre looking for maximum accessibility to the magazine or breech area of your rifle, Two-Piece Bases are worth a look. Fluted for a custom look, these bases are also ideal if youre after greater

more >>
Cabelas
$24.99 See It
56"x8"x10" Orion Padded Mount/Tripod Case

We offer a rugged, soft custom case to fit the SkyView Pro mount. It is fully padded on all sides to provide maximum protection of your instrument. Our padded scope cases provide a convenient means for transporting and storing your scope. It'll stay

more >>
Orion Telescopes & Binoculars
$79.99 See It
Two-Piece Mount Base - Gloss

Experience vastly superior optical quality If youre looking for maximum accessibility to the magazine or breech area of your rifle, Two-Piece Bases are worth a look. Fluted for a custom look, these bases are also ideal if youre after greater

more >>
Cabelas
$24.99 See It
Two-Piece Mount Base - Matte

Experience vastly superior optical quality If youre looking for maximum accessibility to the magazine or breech area of your rifle, Two-Piece Bases are worth a look. Fluted for a custom look, these bases are also ideal if youre after greater

more >>
Cabelas
$24.99 See It
Ruger® 10/22® Receiver Mount - Black 10/22 Receiver Mount

Save 7.5% with coupon code: G4H

Quickly attaches to factory drilled and tapped 10/22 receivers. Six, cross slots provide the versatility to mount full size scopes, plus red dot sights or compact scopes using Weaver-style rings. Silver anodized or hard coat, black finish matches factory receiver. Mfg: Power Custom SPECS: T6061 Aluminum, silver, anodized or hard coat, black finish. 4.75'''' (12cm) long. Includes screws and Allen wrench.

more >>
Brownells
$14.99 See It
Ruger® 10/22® Receiver Mount - Silver 10/22 Receiver Mount

Save 7.5% with coupon code: G4H

Quickly attaches to factory drilled and tapped 10/22 receivers. Six, cross slots provide the versatility to mount full size scopes, plus red dot sights or compact scopes using Weaver-style rings. Silver anodized or hard coat, black finish matches factory receiver. Mfg: Power Custom SPECS: T6061 Aluminum, silver, anodized or hard coat, black finish. 4.75'''' (12cm) long. Includes screws and Allen wrench.

more >>
Brownells
$14.99 See It
30mm Bubble Level

Vortex Bubble Levels. Custom-designed for precise long-range shooting! Increases accuracy by ensuring that your rifle is perfectly vertical before you pull the trigger. Mounts quickly and easily to rifle scope tube.

more >>
The Sportsman Guide
$34.99 See It
Ar-15/M16 M-223 Scope Mount - Nikon M-223 Mount

Save 7.5% with coupon code: G4H

Lightweight aluminum mount clamps to flattop receiver and is custom engineered to provide optimum height and eye relief for the Nikon M-223 series of scopes. Can also be used with a variety of other optics with 1" O.D. tubes. Cantilever extends 2" forward of the receiver to accommodate long eye relief scopes. Three steel crossbolts and the full-length clamping bar secure the mount to any MIL-STD 1913 Picatinny receiver rail.  XR model offers a built-in 20 MOA elevation that aids in accurate long-range shooting without exceeding your scope’s elevation adjustment. Can be used on other scopes with 1" O.D. tubes. Mfg: Nikon SPECS: Aluminum, hardcoat anodized, matte black (MB), Realtree® Max-1® (Max) or Mossy Oak Brush® (Brush) camouflage. Steel mounting hardware, black oxide finish. 5" (12.7cm) O.A.L. 3½" (8.9cm) center-to-center ring spacing; 3.125" (8cm) between ring edges. Requir

more >>
Brownells
$79.94 See It
Ak Dogleg Scope Mount - Rear Peep Sight

Save 7.5% with coupon code: G4H

FEATURES: Integral dust cover and scope rail for AK-47 and AK-74 rifles Lowest possible Mil-Std-1913 mounting surface on an AK Field stripping capability is preserved Return to zero cam lock mechanism Adjustable for custom fit to rifle Constructed of 6061-T6 aluminum  Hard black anodized finish Maintains tension on receiver with side tab, proper adjustment, and redesigned release buttonBENEFITS: Allows for the lowest possible scope mounting Accommodates conventional rifle scopes, as well as red dots Field stripping is the same as a normal dust cover Retains zero after opening dust cover Does not add a significant a Mfg: Texas Weapon Systems

more >>
Brownells
$39.99 See It
Ak Dogleg Scope Mount - Dogleg Scope Mount Gen 2

Save 7.5% with coupon code: G4H

FEATURES: Integral dust cover and scope rail for AK-47 and AK-74 rifles Lowest possible Mil-Std-1913 mounting surface on an AK Field stripping capability is preserved Return to zero cam lock mechanism Adjustable for custom fit to rifle Constructed of 6061-T6 aluminum  Hard black anodized finish Maintains tension on receiver with side tab, proper adjustment, and redesigned release buttonBENEFITS: Allows for the lowest possible scope mounting Accommodates conventional rifle scopes, as well as red dots Field stripping is the same as a normal dust cover Retains zero after opening dust cover Does not add a significant a Mfg: Texas Weapon Systems

more >>
Brownells
$139.99 See It
1 inch Bubble Level

Vortex Bubble Levels. Custom-designed for precise long-range shooting! Increases accuracy by ensuring that your rifle is perfectly vertical before you pull the trigger. Mounts quickly and easily to rifle scope tube.

more >>
The Sportsman Guide
$34.99 See It
Additional items that match your search
AR-15 Scope Mounts

It doesn't matter if you have an AR-15 or M16, these scope mounts are the way to go when you're looking for good quality, dependable bases for your optics.Available:MNT0902 Offering secure mounting within the fixed carry handle, this mount enables

more >>
Cabelas
$26.99 See It
Browning Buckmark Scope Mount - Black Buckmark Mount

Save 7.5% with coupon code: G4H

Convert open sight, Browning Buckmark Pistol for scope use; no gunsmithing required. Lightweight aluminum scope base mounts in the factory sight holes; accepts all Weaver-style rings. No permanent alterations to your pistol are required. Mfg: Weigand Combat SPECS: Aluminum, matte finish, black. 6-1/4" (15cm) long, 1.7 oz. (54 g) wt. Fits Browning Buckmark models including Bullseye, Camper, UDS, and Micro. Includes mounting screws.

more >>
Brownells
$29.99 See It
Ak-47 Scope Mount

Save 7.5% with coupon code: G4H

Style 1 - For AK type rifles that have original gas tubes without side gas port holes. Lightweight, aluminum mount replaces the gas tube to maintain scope alignment and improves stability to prevent shifting zero. Clamps solidly to barrel. Weaver-style base sets below the line of sight, no need to remove mount to use iron sights. Issue sights can be viewed directly through the red dot and reflex scopes. Does not fit the Yugo M-70 AK-47. Mfg: Ultimak SPECS: 6061-T6 Aluminum, black, matte finish. 6-7/8" (17.5cm) long. 6.7 oz. (189 g) wt. Fits all 7.62x39 caliber rifles that have original gas tubes without side gas port holes. Installation may require minor inletting to handguard.

more >>
Brownells
$94.99 See It
Fn-Fal Sa-58 Scope Mount - Sa-58 Scope Mount

Save 7.5% with coupon code: G4H

It takes only a few minutes to replace the dust cover with this solid aluminum mount. Clamps to frame with internal steel rails; provides a rock solid base for mounting even the largest scopes. Picatinny-style rail provides optimum mounting flexibility for scopes or electronic sights. Fits inch- and metric-pattern receivers. Mfg: D.S. Arms SPECS: Aluminum, matte black finish. Accepts Weaver-style rings. 8.5'''' (21.5cm) long. 11 oz. (313g) weight.

more >>
Brownells
$89.99 See It
Scope Tube Fast Fire Mount

Get the most out of your primary optic with the Burris Scope Tube FastFire Mount. Positions into almost any radial position on your primary optic, allowing your primary optic to stay on a higher power of magnification while you switch to FastFire

more >>
Cabelas
$59.99 See It
Scope Mount Dummy Screw

Save 7.5% with coupon code: G4H

SCOPE MOUNT DUMMY SCREW Mfg: Marlin

Brownells
$2.99 See It
Scope Mounts - Unimount 30mm H30mm 6mil

Save 7.5% with coupon code: G4H

Features: Machined aluminum one-piece scope mounts manufactured in Sweden Prevents damage on scope during heavy recoil Rings are grooved on the interior to prevent slippage and to allow gluing Included scope indexing tool allows for perfect scope alignment with the mount Built-in level to ensure that the scope and rifle are perfectly level when shooting Built-in 6mil/20.6moa tilt for long range shooting Rings are cut at 45 degrees instead of horizontal, resulting in no screws being in the way of adjustments and allowing the turrets to be easily viewed from the rear Matte black anodized finish Available as a standard mount or cantilever Mfg: Spuhr Aluminum construction, matte black anodized finish. Fits Picatinny rails. 6mil/20.6moa tilt built-in.

more >>
Brownells
$410.00 See It
Scope Mounts - Cantilever 30mm H37mm 6mil

Save 7.5% with coupon code: G4H

Features: Machined aluminum one-piece scope mounts manufactured in Sweden Prevents damage on scope during heavy recoil Rings are grooved on the interior to prevent slippage and to allow gluing Included scope indexing tool allows for perfect scope alignment with the mount Built-in level to ensure that the scope and rifle are perfectly level when shooting Built-in 6mil/20.6moa tilt for long range shooting Rings are cut at 45 degrees instead of horizontal, resulting in no screws being in the way of adjustments and allowing the turrets to be easily viewed from the rear Matte black anodized finish Available as a standard mount or cantilever Mfg: Spuhr Aluminum construction, matte black anodized finish. Fits Picatinny rails. 6mil/20.6moa tilt built-in.

more >>
Brownells
$450.00 See It
Scope Mounts - Cantilever 34mm H37mm 6mil

Save 7.5% with coupon code: G4H

Features: Machined aluminum one-piece scope mounts manufactured in Sweden Prevents damage on scope during heavy recoil Rings are grooved on the interior to prevent slippage and to allow gluing Included scope indexing tool allows for perfect scope alignment with the mount Built-in level to ensure that the scope and rifle are perfectly level when shooting Built-in 6mil/20.6moa tilt for long range shooting Rings are cut at 45 degrees instead of horizontal, resulting in no screws being in the way of adjustments and allowing the turrets to be easily viewed from the rear Matte black anodized finish Available as a standard mount or cantilever Mfg: Spuhr Aluminum construction, matte black anodized finish. Fits Picatinny rails. 6mil/20.6moa tilt built-in.

more >>
Brownells
$450.00 See It
M14/M1a Tactical Scope Mount - M14/M1a Picatinny Scope Mount

Save 7.5% with coupon code: G4H

Fully-machined hardened steel mount with three-point mounting, provides a stable, secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy, forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope. Weaver has Weaver-style top rail. Picatinny uses a Picatinny rail for added sight mounting options. 7'''' Picatinny - Extended, 7'''' length Picatinny rail system allows you to use many sight mounting options. Tactical features a Picatinny rail but without the open sight channel. Absolutely can’t give under the tightest clam Mfg: Smith Enterprise SPECS: 4140 steel, black, nitride finish. Hardened to Rc 60-62. 5.38'''' (13.6cm) long. 1.875'''' (4.7cm) high. Weighs 10.9 oz (310 g). 7'''' Picatinny - 7'''' (17.7cm) long, 1.85'''' (4.7cm) tall. Weighs 15.3 oz. (435g).

more >>
Brownells
$322.46 See It
Lightweight Tactical Scope Mounts - Lightweight Savage Edge/Axis Aluminum 7 7/16''''

Save 7.5% with coupon code: G4H

Add the versatility of a one-piece Picatinny scope rail to your rifle or shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction and in many cases will not obstruct usage of factory iron sights. Some models available with 20 MOA built-in elevation to aid in long-range shooting without maxing out scope elevation adjustment. Drilled to fit the factory scope mount holes on the gun’s receiver. Hex-head mounting screws and Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket head Allen screws and wrench.

more >>
Brownells
$39.99 See It
Search within results