1 to 20 of about 1415 products for door insulation

Result for "door insulation"
32" x 32" - Fire Rated Un-Insulated Access Door with Plaster Flange

The BA-PFN-PLY access door is not insulated and can only be used on fire rated walls, specifically those made of plaster. Once covered with plaster, the 2 3/4" lath flange will disappear, leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-PLY door available is: (36" x 36"). BA-PFN-PLY fire rated access door specifications, - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies 2 hour fire barrier, rating 11/2 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36" x 36". Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. : MEA # 507-06-M Fire rated by Intertek - Warnock Hersey LEED Certification: This access door can contribute directly to a project's ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors

more >>
Best Access Doors
$366.66 See It
24" x 36" - Fire Rated Un-Insulated Access Door with Plaster Flange

The BA-PFN-PLY access door is not insulated and can only be used on fire rated walls, specifically those made of plaster. Once covered with plaster, the 2 3/4" lath flange will disappear, leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-PLY door available is: (36" x 36"). BA-PFN-PLY fire rated access door specifications, - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies 2 hour fire barrier, rating 11/2 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36" x 36". Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. : MEA # 507-06-M Fire rated by Intertek - Warnock Hersey LEED Certification: This access door can contribute directly to a project's ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors

more >>
Best Access Doors
$358.20 See It
22" x 30" Fire Rated Insulated Upward Opening Ceiling Door

22" x 30" Fire Rated Insulated Upward Opening Ceiling Door . BA-PFU access hatch is designed to be installed on fire rated ceilings only. It can easily replace spring loaded models like the PFI. Its door which does not exceed 89 degrees of upward opening, falls back by law of gravity into its locked position as required by fire certification strandards. Holding the door open while climbing through it becomes much easier with no springs to deal with. The largest fire rated PFU available is: (24" x 36" or 864 sq inches).BA-PFU fire rated access Panel specifications, Submittal Sheet - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: mineral wool Hinge: Continuous piano hinge allows opening to 89 deg Lock / latch: Self latching ring operated slam latch inside and a hex head slam latch outside Finish: DuPont high quality white powder coat Fire Rating: For horizontal ceiling assemblies only Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F/139 deg C at 30 mins, 450 deg F/250 deg C at 60 mins. Maximum door size: 24" x 36" or 864 sq inches (see note)*Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek - Warnock Hersey * Note: Maximum door size 24" x 36" can also be calculated by multiplying the surface area of the door (24"x36"). The maximum surface area is 864 sq inches. The maximum height or width is 36". All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28" x 28" = 784 sq inches. /p>

more >>
Best Access Doors
$269.13 See It
36" x 36" - Fire Rated Un-Insulated Access Door with Plaster Flange

The BA-PFN-PLY access door is not insulated and can only be used on fire rated walls, specifically those made of plaster. Once covered with plaster, the 2 3/4" lath flange will disappear, leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-PLY door available is: (36" x 36"). BA-PFN-PLY fire rated access door specifications, - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies 2 hour fire barrier, rating 11/2 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36" x 36". Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. : MEA # 507-06-M Fire rated by Intertek - Warnock Hersey LEED Certification: This access door can contribute directly to a project's ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors

more >>
Best Access Doors
$487.08 See It
24" x 24" Fire Rated Insulated Upward Opening Ceiling Door

24" x 24" Fire Rated Insulated Upward Opening Ceiling Door . BA-PFU access hatch is designed to be installed on fire rated ceilings only. It can easily replace spring loaded models like the PFI. Its door which does not exceed 89 degrees of upward opening, falls back by law of gravity into its locked position as required by fire certification strandards. Holding the door open while climbing through it becomes much easier with no springs to deal with. The largest fire rated PFU available is: (24" x 36" or 864 sq inches).BA-PFU fire rated access Panel specifications, Submittal Sheet - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: mineral wool Hinge: Continuous piano hinge allows opening to 89 deg Lock / latch: Self latching ring operated slam latch inside and a hex head slam latch outside Finish: DuPont high quality white powder coat Fire Rating: For horizontal ceiling assemblies only Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F/139 deg C at 30 mins, 450 deg F/250 deg C at 60 mins. Maximum door size: 24" x 36" or 864 sq inches (see note)*Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek - Warnock Hersey * Note: Maximum door size 24" x 36" can also be calculated by multiplying the surface area of the door (24"x36"). The maximum surface area is 864 sq inches. The maximum height or width is 36". All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28" x 28" = 784 sq inches. /p>

more >>
Best Access Doors
$269.13 See It
22" x 36" Fire Rated Insulated Upward Opening Ceiling Door

22" x 36" Fire Rated Insulated Upward Opening Ceiling Door . BA-PFU access hatch is designed to be installed on fire rated ceilings only. It can easily replace spring loaded models like the PFI. Its door which does not exceed 89 degrees of upward opening, falls back by law of gravity into its locked position as required by fire certification strandards. Holding the door open while climbing through it becomes much easier with no springs to deal with. The largest fire rated PFU available is: (24" x 36" or 864 sq inches).BA-PFU fire rated access Panel specifications, Submittal Sheet - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: mineral wool Hinge: Continuous piano hinge allows opening to 89 deg Lock / latch: Self latching ring operated slam latch inside and a hex head slam latch outside Finish: DuPont high quality white powder coat Fire Rating: For horizontal ceiling assemblies only Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F/139 deg C at 30 mins, 450 deg F/250 deg C at 60 mins. Maximum door size: 24" x 36" or 864 sq inches (see note)*Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek - Warnock Hersey * Note: Maximum door size 24" x 36" can also be calculated by multiplying the surface area of the door (24"x36"). The maximum surface area is 864 sq inches. The maximum height or width is 36". All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28" x 28" = 784 sq inches. /p>

more >>
Best Access Doors
$342.98 See It
12" x 12" - Fire Rated Un-Insulated Access Door with Plaster Flange

The BA-PFN-PLY access door is not insulated and can only be used on fire rated walls, specifically those made of plaster. Once covered with plaster, the 2 3/4" lath flange will disappear, leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-PLY door available is: (36" x 36"). BA-PFN-PLY fire rated access door specifications, - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies 2 hour fire barrier, rating 11/2 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36" x 36". Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. : MEA # 507-06-M Fire rated by Intertek - Warnock Hersey LEED Certification: This access door can contribute directly to a project's ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors

more >>
Best Access Doors
$141.98 See It
8" x 8" - Fire Rated Un-Insulated Access Door with Plaster Flange

The BA-PFN-PLY access door is not insulated and can only be used on fire rated walls, specifically those made of plaster. Once covered with plaster, the 2 3/4" lath flange will disappear, leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-PLY door available is: (36" x 36"). BA-PFN-PLY fire rated access door specifications, - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies 2 hour fire barrier, rating 11/2 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36" x 36". Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. : MEA # 507-06-M Fire rated by Intertek - Warnock Hersey LEED Certification: This access door can contribute directly to a project's ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors

more >>
Best Access Doors
$139.00 See It
16" x 16" - Fire Rated Un-Insulated Access Door with Plaster Flange

The BA-PFN-PLY access door is not insulated and can only be used on fire rated walls, specifically those made of plaster. Once covered with plaster, the 2 3/4" lath flange will disappear, leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-PLY door available is: (36" x 36"). BA-PFN-PLY fire rated access door specifications, - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies 2 hour fire barrier, rating 11/2 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36" x 36". Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. : MEA # 507-06-M Fire rated by Intertek - Warnock Hersey LEED Certification: This access door can contribute directly to a project's ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors

more >>
Best Access Doors
$175.07 See It
22" x 22" - Fire Rated Un-Insulated Access Door with Plaster Flange

The BA-PFN-PLY access door is not insulated and can only be used on fire rated walls, specifically those made of plaster. Once covered with plaster, the 2 3/4" lath flange will disappear, leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-PLY door available is: (36" x 36"). BA-PFN-PLY fire rated access door specifications, - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies 2 hour fire barrier, rating 11/2 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36" x 36". Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. : MEA # 507-06-M Fire rated by Intertek - Warnock Hersey LEED Certification: This access door can contribute directly to a project's ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors

more >>
Best Access Doors
$210.82 See It
24" x 24" - Fire Rated Un-Insulated Access Door with Plaster Flange

The BA-PFN-PLY access door is not insulated and can only be used on fire rated walls, specifically those made of plaster. Once covered with plaster, the 2 3/4" lath flange will disappear, leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-PLY door available is: (36" x 36"). BA-PFN-PLY fire rated access door specifications, - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies 2 hour fire barrier, rating 11/2 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36" x 36". Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. : MEA # 507-06-M Fire rated by Intertek - Warnock Hersey LEED Certification: This access door can contribute directly to a project's ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors

more >>
Best Access Doors
$231.55 See It
22" x 36" - Fire Rated Un-Insulated Access Door with Plaster Flange

The BA-PFN-PLY access door is not insulated and can only be used on fire rated walls, specifically those made of plaster. Once covered with plaster, the 2 3/4" lath flange will disappear, leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-PLY door available is: (36" x 36"). BA-PFN-PLY fire rated access door specifications, - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies 2 hour fire barrier, rating 11/2 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36" x 36". Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. : MEA # 507-06-M Fire rated by Intertek - Warnock Hersey LEED Certification: This access door can contribute directly to a project's ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors

more >>
Best Access Doors
$313.42 See It
22" x 30" - Fire Rated Un-Insulated Access Door with Plaster Flange

The BA-PFN-PLY access door is not insulated and can only be used on fire rated walls, specifically those made of plaster. Once covered with plaster, the 2 3/4" lath flange will disappear, leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-PLY door available is: (36" x 36"). BA-PFN-PLY fire rated access door specifications, - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies 2 hour fire barrier, rating 11/2 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36" x 36". Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. : MEA # 507-06-M Fire rated by Intertek - Warnock Hersey LEED Certification: This access door can contribute directly to a project's ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors

more >>
Best Access Doors
$246.02 See It
18" x 18" - Fire Rated Un-Insulated Access Door with Plaster Flange

The BA-PFN-PLY access door is not insulated and can only be used on fire rated walls, specifically those made of plaster. Once covered with plaster, the 2 3/4" lath flange will disappear, leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-PLY door available is: (36" x 36"). BA-PFN-PLY fire rated access door specifications, - Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies 2 hour fire barrier, rating 11/2 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36" x 36". Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. : MEA # 507-06-M Fire rated by Intertek - Warnock Hersey LEED Certification: This access door can contribute directly to a project's ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors

more >>
Best Access Doors
$185.76 See It
24" x 36"- Fire Rated Insulated Access Door with Drywall Flange

24" x 36" - Fire Rated Insulated Access Door with Drywall Flange. The BA-PFI-GYP is specially designed to be installed on fire rated drywall covered ceilings and walls. Once a sufficient layer of drywall compound is applied to its corner bead flange, it will leave only the door panel visible for a more aesthetic look. Once the installation is complete and the provided springs are hooked to the back of the panel, this door will be self closing and self locking thus meeting fire certification standards. The largest fire rated PFI-GYP doors available for vertical and horizontal installations are respectively: (48" x 48" ) and (24" x 36" or 864 sq inches).BA-PFI-GYP fire rated access Panel specifications, Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat. Fire Rating: For installation in vertical wall assemblies: Rating 1 1/2 hours . Temperature rise: 250 deg F (139 deg C) at 30 mins and 450 deg F (250 deg C) at 60 mins. Maximum door size of 48" x 48". Rating 3 hours. Temperature rise: 400 deg F at 60 mins. Maximum door size of 48" x 48". For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F (139 deg C) at 30 mins, 450 deg F (250 deg C) at 60 mins. Maximum door size of 24" x 36" or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. Standards listed: NFPA 252-2003, UL 10(b), UL 555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek - Warnock Herseys

more >>
Best Access Doors
$249.36 See It
24" x 24"- Fire Rated Insulated Access Door with Drywall Flange

24" x 24" - Fire Rated Insulated Access Door with Drywall Flange. The BA-PFI-GYP is specially designed to be installed on fire rated drywall covered ceilings and walls. Once a sufficient layer of drywall compound is applied to its corner bead flange, it will leave only the door panel visible for a more aesthetic look. Once the installation is complete and the provided springs are hooked to the back of the panel, this door will be self closing and self locking thus meeting fire certification standards. The largest fire rated PFI-GYP doors available for vertical and horizontal installations are respectively: (48" x 48" ) and (24" x 36" or 864 sq inches).BA-PFI-GYP fire rated access Panel specifications, Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat. Fire Rating: For installation in vertical wall assemblies: Rating 1 1/2 hours . Temperature rise: 250 deg F (139 deg C) at 30 mins and 450 deg F (250 deg C) at 60 mins. Maximum door size of 48" x 48". Rating 3 hours. Temperature rise: 400 deg F at 60 mins. Maximum door size of 48" x 48". For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F (139 deg C) at 30 mins, 450 deg F (250 deg C) at 60 mins. Maximum door size of 24" x 36" or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. Standards listed: NFPA 252-2003, UL 10(b), UL 555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek - Warnock Herseys

more >>
Best Access Doors
$179.54 See It
36" x 36"- Fire Rated Insulated Access Door with Drywall Flange

36" x 36" - Fire Rated Insulated Access Door with Drywall Flange. The BA-PFI-GYP is specially designed to be installed on fire rated drywall covered ceilings and walls. Once a sufficient layer of drywall compound is applied to its corner bead flange, it will leave only the door panel visible for a more aesthetic look. Once the installation is complete and the provided springs are hooked to the back of the panel, this door will be self closing and self locking thus meeting fire certification standards. The largest fire rated PFI-GYP doors available for vertical and horizontal installations are respectively: (48" x 48" ) and (24" x 36" or 864 sq inches).BA-PFI-GYP fire rated access Panel specifications, Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat. Fire Rating: For installation in vertical wall assemblies: Rating 1 1/2 hours . Temperature rise: 250 deg F (139 deg C) at 30 mins and 450 deg F (250 deg C) at 60 mins. Maximum door size of 48" x 48". Rating 3 hours. Temperature rise: 400 deg F at 60 mins. Maximum door size of 48" x 48". For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F (139 deg C) at 30 mins, 450 deg F (250 deg C) at 60 mins. Maximum door size of 24" x 36" or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. Standards listed: NFPA 252-2003, UL 10(b), UL 555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek - Warnock Herseys

more >>
Best Access Doors
$372.06 See It
12" x 12" - High Security Fire Rated Insulated Access Door with Flange

The BA-PFI-HS High Security access door is insulated with 2" thick mineral wool and can be used on fire rated walls and ceilings. It comes with a 1" flange for an easy flush installation on any type of surface. As per UL and NFPA standards, once the installation is complete and the provided springs are hooked to the back of the panel, the door will be self closing and self locking. The largest fire rated PFI doors available for vertical and horizontal installations with temperature rise are respectively: (48" x 48") and (24" x 36" or 864 sq inches). BA-PFI-HS fire rated access door specifications, - Material: 14 gauge cold rolled steel frame and 16 gauge galvanneal steel door Insulation: 2" mineral wool Hinge: Continuous piano hinge Lock / latch: Mortise slam latch with cylinder Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies: Rating 1 1/2 hours. Temperature rise: 250°F (139°C) at 30 mins and 450°F (250°C) at 60 mins. Maximum door size of 48" x 48". Rating 3 hours. Temperature rise: 400°F at 60 mins. Maximum door size of 48" x 48". For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250°F (139°C) at 30 mins, 450°F (250°C) at 60 mins. Maximum door size of 24" x 36" or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. Standards listed: NFPA 252-2003, UL 10(b), UL 555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek - Warnock Hersey

more >>
Best Access Doors
$298.14 See It
Storm Doors: Andersen Doors 4000 Series 36 in. Almond Fullview Dual Pane Insulating Glass Storm Door brown HD4FTN-36AL

Free Shipping on Over 500K Items!

Shop for Doors & Windows at The Home Depot. This Andersen 4000 Series 36 in. Almond Aluminum Full-View Storm Door with Nickel Hardware features double-pane insulated glass for energy efficiency. It is designed for convenience when switching the

more >>
Home Depot
$319.00 See It
Storm Doors: Andersen Doors 4000 Series 36 in. Almond Fullview Dual Pane Insulating Glass Storm Door brown HD4FVT-36AL

Free Shipping on Over 500K Items!

Shop for Doors & Windows at The Home Depot. The Andersen 4000 Series 36 in. Almond Aluminum Full-View Storm Door with Brass Hardware offers an elegant, curved door panel with thermal glass. It admits light for a bright, well-ventilated interior and

more >>
Home Depot
$319.00 See It
Search within results

Popular queries