1 to 20 of  100 products for galaxy audio jibs jacks in the box 4 way splitter

No exact matches found for galaxy audio jibs jacks in the box 4 way splitter

100 similar items found

RDL EZ-ADA4 Stereo Audio Distribution Amplifier

Signal Amplifier - Width: 5.7" - Depth: 3"

more >>
Herman ProAV
$123.77 See It
AVHK1 HUM KILLER Stereo Audio Isolation Transformer Dual RCA Input

The AV-HK1 is a stereo transformer isolation module for use with unbalanced, high impedance audio inputs Input and output connections are provided on gold-plated phono jacks The AV-HK1 is supplied with two adapter cables to facilitate connecting with products that use mini-plugs and jacks The shield connection of each INPUT jack is electrically isolated from the case and from the output ground The shield connection of each OUTPUT jack is connected to the case shield The user audio source, such as a computer, CD player, cassette player or other consumer audio product, connects to the AV-HK1 INPUT The OUTPUT should be connected to the input of the grounded amplifier or mixer in the audio systemInput and output jacks are oriented left (L) and right (R) when the user is facing each end panel The correct channel orientation is indicated on the front panel of the module The AV-HK1 is a rugged product designed for portable use For fixed installations, a mounting bracket is included Many consumer audio inputs and outputs use stereo mini-plugs and jacks The AV-HK1 includes two adapter cables to interface with these products The cable kits are also available separately from RDL in the event a cable becomes worn or lost Model AV-AC2 Cable Kit (included with AV-HK1), Includes 1 each Dual Phono to Stereo Mini-plug; Length 8 in (20 cm) connectors 1 each Dual Phono to Stereo Mini-jack; Length 8 in (20 cm) connectorsFeaturesGround Isolation in Unbalanced LineGround-Loop EliminationUnbalanced Stereo Galvanic IsolationIsolation in Rugged Field CasePortable or Permanent Isolation Module

more >>
Herman ProAV
$81.76 See It
GE Audio Cable

Cable Length: 6 ft - Connector on First End: 2 x RCA Audio - Connector on Second End: 2 x RCA Audio - Device Supported: Audio Device

more >>
Target
$6.79 See It
Speaker Spring Clip Keystone Jacks - 1 Pair - Black

Keystone inserts are an easy way to customize wall plates or patch panels to fit your install while providing a finished look. These speaker spring clip keystones provide a clean termination point for speakers. Use up to 14 AWG wire on the front spring clips and 12 AWG wire on the rear. Color-coded spring clips make it easy to install speakers with the correct polarity. Mount this keystone adapter into any keystone wall plate or patch panel. Features: Color: Black 1 Pair â red and black spring clips for polarity identification Solderless Up to 14 AWG speaker wire for front connection Up to 12 AWG speaker wire for rear connection Includes two female disconnectors suitable for 12-14 AWG speaker wires. Fits into any Keystone opening UL Listed Wall Plates & Jacks > Audio & Video Jacks > Speaker Jacks, Wall Plates & Jacks > Audio & Video Jacks > Speaker Jacks IC107BSSBK

more >>
ShowMeCables
$4.39 See It
RUPA40D 40 Watt Stereo Audio Amplifier with VCA and Power Supply

The RU-PA40D is the ideal choice in many applications where a high quality, high-efficiency utility amplifier is needed to drive a pair of 4 O or 8 O speakers It is specifically suited to amplification applications where users need to adjust the gain Examples include projectors or monitors with fixed audio outputs used in classrooms, boardrooms or video conferencing The RU-PA40D is ideal for foreground sound amplification in small to medium rooms or in a specific zone within a retail spaceThe RU-PA40D features two balanced line-level inputs on a detachable terminal block Two unbalanced line level inputs are available on high-reliability gold plated phono (RCA) jacks A front-panel gain control trimmer permits setting the maximum gain for each channel The gain range accommodates the range of typical balanced and unbalanced audio signal levels Each of the two RU-PA40D outputs will drive a 4 O or 8 O speaker or multiple speakers connected to present a 4 O or 8 O load to the amplifier The output impedance is switch-selectable on the front panel of the moduleThe RU-PA40D is equipped with an internal stereo VCA for setting the output level on both amplifier channels A detachable terminal block provides for the connection of an external 10 KO potentiometer or a 0 to 10 Vdc control voltage RDL remote controls are available to provide single-turn, multi-turn (rotary encoder) or pushbutton (ramp or fixed level selection) user level control VCA control insures long term noise-free level adjustment Remote control is possible using audio, control or common computer network wireA front-panel switch is provided to sum the audio inputs to mono In the STEREO mode, the RU-PA40D independently amplifies each audio channel, left (L) and right (R) If speaker placement in the specified installation is incompatible with stereo amplification, the INPUT MODE switch may be set to SUMMED MONOThe RU-PA40D includes a stereo analog compressor/limiter for audio fidelity noticeably superior to conventional class D amplifiers with digital limiting The input GAIN settings determine whether the limiter alone is used for clipping suppression, or if the full compressor/limiter will be used to substantially increase the average output power beyond that of a standard 40 W amplifier A red front-panel LED flashes when the limiter is preventing output clipping The RU-PA40D, with compression, is capable of producing average audio output levels and clarity normally expected from stereo amplifiers with a much higher output power ratingA blue POWER LED illuminates when the RU-PA40D is powered from its external 24 Vdc power supply (included) The module is equipped with both thermal and output short-circuit protection The high-efficiency Class D output stages produce minimal heat for all levels of expected voice or music modulationFeaturesVCA Controlled Stereo Audio Power Amplifier20 Watts RMS per Channel into 8 O 40 Watts Total15 Watts RMS per Channel into 4 O 30 Watts TotalUnbalanced RCA Jack

more >>
Herman ProAV
$229.03 See It
TXA2D Dual Audio Converter

The TX-A2D is the ideal choice in installations requiring passive isolation and level attenuation between a professional balanced line-level stereo source and consumer equipment unbalanced inputsThe TX-A2D is a complete unbalanced stereo line-level audio output module The front panel provides a detachable terminal block for connecting each channel of a balanced 4 dBu audio source The input signals are coupled to two front-panel gold plated phono jacks through studio-quality isolation transformers Each output is coupled through an attenuation network that produces a nominal -10 dBV level Shielding is provided by the TX-A2D's heavy duty aluminum enclosureWherever professional format audio signals need to be converted to an unbalanced line level, the TX-A2 and TX-A2D are an ideal choice Use them individually or in conjunction with other RDL products as part of a complete audio/video systemFeaturesUnbalanced Audio Outputs from a Stereo Balanced LineBalanced to Unbalanced ConversionStereo Input to Stereo Output4 dBu Input Level to -10 dBV Output LevelStudio-Quality Transformer IsolationPassive Converter with Output Jacks

more >>
Herman ProAV
$96.26 See It
Trio Stereo System - Brown Face (CR3019A-BR)

Find Home Stereo Systems at Target.com! The Crosley TRIO stereo system has 2 speakers that deliver clear and dynamic sound, plus a headphone jack for private listening. The PAR (Portable Audio Ready) port lets you plug in your MP3 player or CD unit.

more >>
Target
$99.99 See It
Cruiser Turntable - Online Only

Crosley Crosley Cruiser Turntable - Online Only. Love the rich, warm sound of vinyl, but wish it was portable? Mobilize your music with the Crosley Cruiser 3-speed portable turntable. Constructed of wood and bound in leatherette material, the briefcase-styled record player is lightweight and easily transported. Features built-in stereo speakers, headphone jack, AC power adapter and RCA audio out.

more >>
Belk
$79.99 See It
Cruiser Turntable

Crosley Crosley Cruiser Turntable. Love the rich, warm sound of vinyl, but wish it was portable? Mobilize your music with the Crosley Cruiser 3-speed portable turntable. Constructed of wood and bound in leatherette material, the briefcase-styled record player is lightweight and easily transported. Features built-in stereo speakers, headphone jack, AC power adapter and RCA audio out.

more >>
Belk
$79.99 See It
Unirise Clearfit Cat.6a Network Cable

Limited Warranty: Lifetime - Color: Black - Cable Length: 3 ft - Connector on First End: 1 x RJ-45 Male Network - Connector on Second End: 1 x RJ-45 Male Network - Cable Type: Category 6a - Device Supported: Network Device

more >>
Target
$14.99 See It
Unirise Clearfit Cat.6a Network Cable

Limited Warranty: Lifetime - Color: Black - Cable Length: 4 ft - Connector on First End: 1 x RJ-45 Male Network - Connector on Second End: 1 x RJ-45 Male Network - Cable Type: Category 6a - Device Supported: Network Device

more >>
Target
$14.99 See It
Jasco GE Audio Cable

Cable Length: 6 ft

more >>
Target
$4.98 See It
C2G Stereo Audio Cable

Limited Warranty: Lifetime - Color: Beige - Cable Length: 6 ft - Connector on First End: 1 x Mini-phone Male - Connector on Second End: 1 x Mini-phone Male

more >>
Herman ProAV
$5.39 See It
TXPA40D 40 Watt Stereo Audio Amplifier

The TX-PA40D is the ideal choice in many applications where a high quality, high-efficiency utility amplifier is needed to drive a pair of 4 Ohm or 8 Ohm speakers It is specifically suited to fixed-gain amplification applications where gain is controlled by other equipment Examples include projectors with variable audio outputs used in classrooms, boardrooms and video conferencing The TX-PA40D features two unbalanced line level inputs on high-reliability gold plated phono (RCA) jacks A front-panel recessed gain control trimmer permits setting the desired amplifier output level for each channel The gain range accommodates the range of typical unbalanced audio signal levels Each of the two TX-PA40D outputs will drive a 4 Ohm or 8 Ohm speaker or multiple speakers connected to present a 4 Ohm or 8 Ohm load to the amplifier The output impedance is switch-selectable on the front panel of the module A front-panel switch is provided to sum the audio inputs to mono In the STEREO mode, the TX-PA40D independently amplifies each audio channel, left (L) and right ® If speaker placement in the specified installation is incompatible with stereophonic amplification, the INPUT MODE switch may be set to SUMMED MONO The TX-PA40D includes a stereo analog compressor/limiter for audio fidelity noticeably superior to conventional class D amplifiers with digital limiting The input GAIN settings determine whether the limiter alone is used for clipping suppression, or if the full compressor/limiter will be used to substantially increase the average output power beyond that of a standard 40 W amplifier A red front-panel LED flashes when the limiter is preventing output clipping Normal audio level signals remain unaffected by the compressor thereby preserving audio dynamics If the input level is increased so the compressor is active, the LED remains dimly lit between peak flashes The audio is compressed according to three dynamic time constants providing aural transparency while maintaining clean, unclipped amplified audio for input overloads of up to 20 dB The TX-PA40D, with compression, is capable of producing average audio output levels and clarity normally expected from stereo amplifiers with a much higher output power rating A blue POWER LED illuminates when the TX-PA40D is powered from its external 24 Vdc power supply The module is equipped with both thermal and output short-circuit protection The high-efficiency Class D output stages produce minimal heat for all levels of expected voice or music modulation Continuous full-power operation with audio tones will not damage the amplifier, but is not recommended Wherever an ultra-compact, high quality, high efficiency audio power amplifier is needed to provide reliability and unsurpassed versatility, the TX-PA40D is the ideal choice Use the TX-PA40D individually, or combine it with other RDL products as part of a complete audio/video system Features Stereo Audio Power Amplifier20 Watts RMS per Channel into 8 Ohm - 40 Wat

more >>
Herman ProAV
$206.01 See It
Car Audio Installation Cable - Panel Mount 3.5mm Stereo Female To Dual Rca Male - 12 Ft

This Car Audio Installation Cable is the perfect solution for mounting a 3.5mm jack to any suitable surface in your car. Installing this cable into your car radio will enable you to plug an MP3 player, mobile device, or iPod into your existing in-dash receiver. It is easy to install and provides a clean and professional look. Once your insallation is complete, simply plug in your device and enjoy! Features: Connector A: Panel mount 3.5mm TRS (stereo) jack (female) Connector B: Dual RCA plug (male) Length: 12 FT Flush mount Easy installation Click here for 3.5mm Male to Male Cables Check out the video above for an overview on how to easily install this cable into your car's radio. Audio Video > 2.5mm & 3.5mm, Audio Video > 2.5mm & 3.5mm 939F-12

more >>
ShowMeCables
$18.79 See It
RUMLD4 Microphone / Line Distribution Amplifier

The RU-MLD4 is a four channel audio distribution amplifier The input and all four outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks The input accepts either a balanced microphone or line level signal Each of the four outputs provides either a microphone or line level signal Both the front-panel XLR connectors and the rear-panel terminals are active at all times The RU-MLD4 may be rack-mounted with the XLR jacks facing forward, or may be reverse-mounted using the RDL RU-FP1 Filler Panel/Reverse Mount KitThe audio input is equipped with a rear-panel switch to select between MIC and LINE level Two additional switches allow setting the MIC input for LO or HI gain and for enabling or disabling standard 24 Vdc phantom The two microphone gain settings allow the connection of a wide variety of dynamic and condenser microphones Each output is provided with a separate rear-panel switch to set the associated level to either MIC or LINE Audio outputs are isolated from each other and may be wired balanced or unbalanced Gain trim is provided on a front-panel control An RDL Dual-led VU meter is provided above the gain trimmer The meter is calibrated to indicate 4 dBu for outputs set to line level The rear panel provides a detachable terminal block and a power input jack to connect 24 Vdc power Each output of the RU-MLD4T is equipped with a studio-quality audio output transformer FeaturesDistribution Amplifier with Four OutputsFront Panel XLR Input / Output JacksDetachable Input / Output Terminal BlocksSwitch-selectable Mic or Line InputSwitch-selectable Mic Gain and PhantomGain Trim on InputEach Output Switch-selectable Mic or Line

more >>
Herman ProAV
$239.07 See It
DCIJ3 Mono Consumer Input Jacks

The D/S-CIJ3 is the ideal choice in installations requiring the passive mixing of two unbalanced line level audio sources to feed a mono balanced (or unbalanced) audio line The D/S-CIJ3 is a complete unbalanced line-level audio input module The front panel features two gold plated phono jacks and a single stereo mini-jack, intended for mono or stereo consumer level sources An input signal may be connected to either the phono jacks or to the mini-jack The left and right signal inputs are combined and balanced through audio transformers configured to reject induced hum A mono line-level output is provided on the rear-panel detachable terminal block for connection to a 10 kO or higher input impedance line-level module or equipment input FeaturesStereo Inputs to Mono OutputStereo Inputs on RCA Jacks and Stereo Mini-JackUnbalanced to Balanced Conversion Without GainTransformer Isolation for Unbalanced Line InputsHum Cancellation on Unbalanced Line InputsLine-Level Output to Feed 10 kO Equipment InputsOutput Connections on Detachable Terminal BlockMix Stereo Inputs to Mono BalancedAvailable in RDL White/Gray (D-CIJ3)Available in Stainless Steel (DS-CIJ3)

more >>
Herman ProAV
$67.74 See It
Gold Rca Female To F Type Female Keystone Jack - 8 Multi-color Bands - Ivory

RCA keystone inserts are an easy way to customize wall plates or patch panels to fit your install while providing a finished look. Our RCA keystones include a color coded insert to quickly identify the appropriate cable. The rear F-type coaxial jack allows for in-wall cable runs using shielded RG-6 or RG-59 cable. This jack is easy to install and will fit into any standard size keystone wall plate, surface mount box, or patch panel. Use this coupler for RCA audio/video applications. Features: Color: Ivory Gold-Plated Front: RCA Jack Rear: F-Type Jack Multi-Colored Bands Fits into Any Keystone Opening Used for Audio and Video Applications Ideal for Residential or Commercial Use Wall Plates & Jacks > Audio & Video Jacks > RCA Jacks, Wall Plates & Jacks > Audio & Video Jacks > RCA Jacks 2581

more >>
ShowMeCables
$2.49 See It
DCIJ3D Stereo Consumer Input Jacks

The D/S-CIJ3D is the ideal choice in installations requiring stereo unbalanced line level audio sources to feed stereo balanced (or unbalanced) audio lines The D/S-CIJ3D is a complete unbalanced line-level audio input module The front panel features two gold plated phono jacks and a single stereo mini-jack, intended for mono or stereo consumer level sources An input signal may be connected to either the phono jacks or to the mini-jack The inputs are balanced through audio transformers configured to reject induced hum A stereo line-level output is provided on the rear-panel detachable terminal block for connection to 10 kO or higher input impedance line-level module or equipment inputs FeaturesStereo Inputs to Stereo OutputsStereo Inputs on RCA Jacks and Stereo Mini-JackUnbalanced to Balanced Conversion Without GainTransformer Isolation for Unbalanced Line InputsHum Cancellation on Unbalanced Line InputsLine-Level Output to Feed 10 kO Equipment InputsOutput Connections on Detachable Terminal Block

more >>
Herman ProAV
$80.69 See It
Gold Rca Idc Punchdown Keystone Jack - Green Insert - White

ICC RCA keystone inserts are an easy way to customize wall plates or patch panels to fit your install while providing a finished look. Our RCA keystones include a color coded insert to quickly identify the appropriate cable. The rear 110 IDC terminal allows for in-wall runs using Ethernet cable. This jack is easy to install and will fit into any standard size keystone wall plate, surface mount box, or patch panel. Use this coupler for RCA audio/video applications. Features: Color: White Gold-Plated Front: RCA Jack Rear: 110 IDC Terminal Green Insert for Easy Identification Fits into Any Keystone Opening Used for Audio and Video Applications Ideal for Residential or Commercial Use Wall Plates & Jacks > Audio & Video Jacks > RCA Jacks, Wall Plates & Jacks > Audio & Video Jacks > RCA Jacks IC107G8GWH

more >>
ShowMeCables
$3.49 See It
Search within results
  • Find by Price
    • $ to $