1 to 1 of  1 products for hydro quip pumps

Result for "hydro quip pumps"
Silver B Balboa Lite Leader Replacement System

Hydro-Quip's Silver B Series Balboa Lite Leader Replacement Control System   You no longer need to retro-fit the plumbing to replace the Lite Leader control system in your spa. this Hydro-quip replacement control system will replace all three versions of the Lite Leader without the headache of modifyng the plumbing. This is an easy direct replacement for Balboa's Discontinued Lite Leader Series of control systems.   Voltage Input: 120 or 240 volts 4 KW Heater with closed pressure switch design and muti-mount location New 2spd Pump cord New ozonator cord New Light cord Outstanding 2 YEAR warranty New Topside Control Panel This is a complete control system to replace your old, tired or unresponsive Balboa Lite Leader Control System or it can be used as a retro-fit for other spas as well. Replaces: 54114-H, 54114-HC, 54114-NC, 54114-HC1, 54116, Lite Leader      

more >>
BW SPA PARTS
$479.95 See It
Additional items that match your search
PS6502BHL24 Platinum Spa Control System 4kw L Htr Eco 401

HydroQuip Platinum Series PS6502B Spa Control System with 4kw L-shaped heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6502 Platinum B features the reliability of Balboa Technology.  Will Operate: 2-speed pump #1 1-speed Pump #2 or 1-speed Air Blower Ozonator Circ pump (requires a minimum of 23 gpm) 12v Light   Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 4kw (L-Shaped) Heater (2" unions) with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 401 (Lite Duplex) Top Side 2 Overlays included (2-pumps or 1pump & 1 air blower)   This control system is the perfect solution for any system replacement for a single 2-speed Pump #1 and 1-speed Pump #2 or Air Blower set up where the heater attaches to the discharge pump. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub.   If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)

more >>
BW SPA PARTS
$589.95 See It
PS6501BH24 Platinum Spa Control System 4kw Eco 401

HydroQuip Platinum Series PS6501B Spa Control System with 4kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6501 Platinum B features the reliability of Balboa Technology Will Operate:2-speed pump #1OzonatorCirc pump (requires a minimum of 23 gpm)12v Light Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 4kw (15" x 2") Heater with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 401 (Lite Duplex) Top Side (included) This control system is the perfect solution for any system replacement for a single 2-speed set up. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub. If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)

more >>
BW SPA PARTS
$579.95 See It
PS6502BHL24 Platinum Spa Control System 5.5kw L Htr Eco 200

HydroQuip Platinum Series PS6502B Spa Control System with 5.5kw L-shaped heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6502 Platinum B features the reliability of Balboa Technology.  Will Operate: 2-speed pump #1 1-speed Pump #2 or 1-speed Air Blower Ozonator Circ pump (requires a minimum of 23 gpm) 12v Light   Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) 1-speed Pump #2 or Air Blower (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 5.5kw (L-Shaped) Heater (2" unions) with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 200 (mini oval) Top Side 2 Overlays included (2-pumps or 1pump & 1 air blower) This control system is the perfect solution for any system replacement for a single 2-speed Pump #1 and 1-speed Pump #2 or Air Blower set up where the heat attaches to the discharge pump. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub.   If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)

more >>
BW SPA PARTS
$569.95 See It
PS6501BH24 Platinum Spa Control System 4kw Eco 200

HydroQuip Platinum Series PS6501B Spa Control System with 4kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6501 Platinum B features the reliability of Balboa Technology. Will Operate:2-speed pump #1OzonatorCirc pump (requires a minimum of 23 gpm)12v Light Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 4kw (15" x 2") Heater with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 200 (mini oval) Top Side (included)This control system is the perfect solution for any system replacement for a single 2-speed set up. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub. If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)  

more >>
BW SPA PARTS
$559.95 See It
PS6501BHL24 Platinum Spa Control System 4kw L Htr Eco 401

HydroQuip Platinum Series PS6501B Spa Control System with 4kw L-shaped heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6501 Platinum B features the reliability of Balboa Technology.  Will Operate: 2-speed pump #1 Ozonator Circ pump (requires a minimum of 23 gpm) 12v Light   Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 4kw L-Shaped Heater (2" Unions) with 24" cords for versatility Heater does not have to be mounted to control box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 200 (mini oval) Top Side (included) This control system is the perfect solution for any system replacement for a single 2-speed set up where the heater sits on the discharge port of the pump. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub.   If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)  

more >>
BW SPA PARTS
$589.95 See It
PS6603BHL24 Platinum Spa Control System 4kw L Htr HT701S

HydroQuip Platinum Series PS6603B Spa Control System with 4kw L-shaped heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6603 Platinum B features the reliability of Balboa Technology. Will Operate:2-speed pump #12-speed Pump #21-speed Blower or Pump #3OzonatorCirc pump (requires a minimum of 23 gpm)12v Light Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) 2-speed Pump #2 (120 or 230 volt) Air Blower (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 4kw (L-Shaped) Heater (2" unions) with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 7 Button HT701S Top SideThis control system is the perfect solution for any system replacement for a single 2-speed Pump #1, 2-speed Pump #2, Air Blower or pump #3 set up where the heat attaches to the discharge pump. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub. If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)

more >>
BW SPA PARTS
$619.95 See It
PS6501BH24 Platinum Spa Control System 5.5kw Eco 401

HydroQuip Platinum Series PS6501B Spa Control System with 5.5kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6501 Platinum B features the reliability of Balboa Technology Will Operate:2-speed pump #1OzonatorCirc pump (requires a minimum of 23 gpm)12v Light Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 5.5kw (15" x 2") Heater with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 401 (Lite Duplex) Top Side (included) This control system is the perfect solution for any system replacement for a single 2-speed set up. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub. If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)

more >>
BW SPA PARTS
$579.95 See It
PS6603 Platinum Spa Control System 4kw HCGFCI

HydroQuip Platinum Series PS6603 Spa Control System with 4kw heater and HCGFCI featuring a slide heater for most heater retro fit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application. This slide technology means that there is chance that you will need to replumb your spa due to replacing your old control system. The Platinum Series PS6603 can operate the following:  Pump#1 2 speed (120v or 240v) Pump#2 1 or 2 speed (120v or 240v) Blower (120v or 240v) Circulation pump Ozonator LightIncluded in kit: 15" 4kw Slide Heater (24" wire) Platinum Control Box (Gecko PCB) ECO-3 Topside Panel Eco-3 Adapter Plate New Component Cables Thermo Well Light w/ cable Full 1 Year Warranty HCGFCI

more >>
BW SPA PARTS
$639.95 See It
PS9704 Platinum Spa Control System 5.5kw no GFCI

HydroQuip Platinum Series PS9704 Spa Control System with 5.5kw heater and no GFCI, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The Platinum Series S9704 can operate the following: Pump#1 2 speeed (120v or 240v) Pump#2 2 speed (120v or 240v) Pump#3 1 speed (120v or 240v) Air Blower (120v or 240v) Circulation pump Ozonator LightIncluded in Kit: 15" 5.5kw Slide Heater (24" wire) Platinum Control Box (Gecko PCB) 10 button Topside Topside adapter plate New Component Cables Thermowell Light w/ cable Full 1 Year Warranty 

more >>
BW SPA PARTS
$729.95 See It
PS9704 Platinum Spa Control System 4kw no GFCI

HydroQuip Platinum Series PS9704 Spa Control System with 4kw heater and no GFCI, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The Platinum Series S9704 can operate the following: Pump#1 2 speeed (120v or 240v) Pump#2 2 speed (120v or 240v) Pump#3 1 speed (120v or 240v) Air Blower (120v or 240v) Circulation pump Ozonator LightIncluded in Kit: 15" 4kw Slide Heater (24" wire) Platinum Control Box (Gecko PCB) 10 button Topside Topside adapter plate New Component Cables Thermowell Light w/ cable Full 1 Year Warranty 

more >>
BW SPA PARTS
$729.95 See It
Baptismal Control System 5.5kw 240 volt BES-6000T

HydroQuip Baptismal BES-6000T Complete Control System with TimerStandard Features: 5.5kw in 304SS Housing 3/4HP, 120V Pump 24hr Timer with Mode Switch Full Range Thermostat 50A High Current GFCI High Limit Protected Pressure Switch Activated Base Mounted Exclusive Features: VDS Visual Diagnostics Heater ON Indicator Light Detailed Installation Manual Detailed Owners Manual Detailed Wiring Diagram APPROVAL LISTINGS: UL LISTED, INDOOR ONLY, UL1563 ELECTRICAL SPECIFICATIONS: SINGLE PHASE, *4-WIRE SERVICE, 60HZ MINIMUM SPACE REQUIRED: 15H X 33W X 17D TOTAL AMP DRAW: BES6000T 30A, CIRCUIT BREAKER SIZE 40 SHIPPING DIMENSIONS: 23H X 21W X 8D SHIPPING WEIGHT: BES6000T 351lbs. WARRANTY: 1 YEAR LIMITED WARRANTY   System may take 3-4 business days before shipping  

more >>
BW SPA PARTS
$825.95 See It
PS6603B Platinum Spa Control System 5.5kw

HydroQuip Platinum Series PS6603B Spa Control System with 5.5kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6603 Platinum B features the reliability of Balboa techology.  The Platinum Series PS6603B can operate the following: Pump#1 2 speeed (120v or 240v) Pump#2 2 speed (120v or 240v) Air Blower (120v or 240v) Ozonator LightIncluded in Kit: 15" 5.5kw Slide Heater Platinum Control Box (Balboa PCB) 7 button Topside Topside adapter plate New Component Cables Thermowell Light w/ cable Full 3 Year Warranty 

more >>
BW SPA PARTS
$599.95 See It
PS6501BH24 Platinum Spa Control System 5.5kw Eco 200

HydroQuip Platinum Series PS6501B Spa Control System with 5.5kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6501 Platinum B features the reliability of Balboa Technology Will Operate:2-speed pump #1OzonatorCirc pump (requires a minimum of 23 gpm)12v Light Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 5.5kw (15" x 2") Heater with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 200 (mini oval) Top Side (included)This control system is the perfect solution for any system replacement for a single 2-speed set up. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub. If your not sure if this will work for your application give us a call. 866-966-9799 (tech support) 

more >>
BW SPA PARTS
$559.95 See It
PS6503B Platinum Spa Control System 5.5kw

HydroQuip Platinum Series PS6503B Spa Control System with 5.5kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6503 Platinum B features the reliability of Balboa techology.  The Platinum Series PS6603B can operate the following: Pump#1 2 speeed (120v or 240v) Pump#2 1 speed (120v or 240v) Air Blower (120v or 240v) Ozonator LightIncluded in Kit: 15" 5.5kw Slide Heater Platinum Control Box (Balboa PCB) 7 button Topside Topside adapter plate New Component Cables Light w/ cable Full 3 Year Warranty 

more >>
BW SPA PARTS
$597.95 See It
PS6502BHL24 Platinum Spa Control System 5.5kw L Htr Eco 401

HydroQuip Platinum Series PS6502B Spa Control System with 5.5kw L-shaped heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6502 Platinum B features the reliability of Balboa Technology.  Will Operate: 2-speed pump #1 1-speed Pump #2 or 1-speed Air Blower Ozonator Circ pump (requires a minimum of 23 gpm) 12v Light   Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 5.5kw (L-Shaped) Heater (2" unions) with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 401 (Lite Duplex) Top Side 2 Overlays included (2-pumps or 1pump & 1 air blower)   This control system is the perfect solution for any system replacement for a single 2-speed Pump #1 and 1-speed Pump #2 or Air Blower set up where the heater attaches to the discharge pump. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub.   If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)

more >>
BW SPA PARTS
$589.95 See It
PS6501BHL24 Platinum Spa Control System 4kw L Htr Eco 200

HydroQuip Platinum Series PS6501B Spa Control System with 4kw L-shaped heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6501 Platinum B features the reliability of Balboa Technology. Will Operate:2-speed pump #1OzonatorCirc pump (requires a minimum of 23 gpm)12v Light Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 4kw L-Shaped Heater (2" Unions) with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 200 (mini oval) Top Side (included)  This control system is the perfect solution for any system replacement for a single 2-speed set up where the heater sits on the discharge port of the pump. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub.  If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)  

more >>
BW SPA PARTS
$569.95 See It
PS6502BH24 Platinum Spa Control System 4kw Eco 401

HydroQuip Platinum Series PS6502B Spa Control System with 4kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6502 Platinum B features the reliability of Balboa Technology. Will Operate:2-speed pump #1 1-speed Pump #2 or 1-speed Air BlowerOzonatorCirc pump (requires a minimum of 23 gpm)12v Light Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 4kw (15" x 2") Heater with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 401 (Lite Duplex) Top Side 2 Overlays included (2-pumps or 1pump & 1 air blower)  This control system is the perfect solution for any system replacement for a single 2-speed Pump #1 and 1-speed Pump #2 or Air Blower set up. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub. If your not sure if this will work for your application give us a call. 866-966-9799 (tech support)

more >>
BW SPA PARTS
$589.95 See It
PS6502BH24 Platinum Spa Control System 5.5kw Eco 200

HydroQuip Platinum Series PS6502B Spa Control System with 5.5kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6502 Platinum B features the reliability of Balboa Technology. Will Operate:2-speed pump #11-speed Pump #2 or 1-speed Air BlowerOzonatorCirc pump (requires a minimum of 23 gpm)12v Light Features: 120 or 230 volt Supply Voltage 2-speed Pump #1 (120 or 230 volt) 1-speed Pump #2 or Air Blower (120 or 230 volt) Circulation Pump Ready (120 or 230 volt) Ozone Ready (must match circ pump voltage) 12v light (No Fiber Optic) 5.5kw (15" x 2") Heater with 24" cords for versatility Heater does not have to be mounted to Control Box Balboa M7 Dual Sensor Technology Top side adapter Plate Cord set included 4 button Eco 200 (mini oval) Top Side 2 Overlays included (2-pumps or 1pump & 1 air blower)This control system is the perfect solution for any system replacement for a single 2-speed Pump #1 and 1-speed Pump #2 or Air Blower set up. The versatility of HydroQuip slide heater technology along with the reliability of Balboa electronics gives the installer the versatility of retro fitting this system into almost any Hot Tub. If your not sure if this will work for your application give us a call. 866-966-9799 (tech support) 

more >>
BW SPA PARTS
$569.95 See It
PS6503B Platinum Spa Control System 4kw

HydroQuip Platinum Series PS6503B Spa Control System with 4kw heater, featuring a slide heater for most heater retrofit applications. The heater can be mounted below the control system, on the bottom back of the control system, on the middle of the control system or on the top back. The Platinum Series heater can be located to fit your application with ease. This slide technology means that there is virtually no chance that you will need to re-plumb your spa due to replacing your old control system. The PS6503 Platinum B features the reliability of Balboa Technology. The Platinum Series PS6603B can operate the following: Pump#1 2 speeed (120v or 240v) Pump#2 1 speed (120v or 240v) Air Blower (120v or 240v) Ozonator LightIncluded in Kit: 15" 4kw Slide Heater Platinum Control Box (Balboa PCB) 7 button Topside Topside adapter plate New Component Cables Light w/ cable Full 3 Year Warranty 

more >>
BW SPA PARTS
$597.95 See It
Search within results
  • Find by Price
    • $ to $
  • Category
  • Brands
  • Shop