1 to 20 of  58 products for inhaler case

Result for "inhaler case"
Quilted Inhaler case

This case is just the right for your inhaler so you can find in right when you need it. One of my customer give me this idea. It will be great for your purse,diaper bag,traveling,backpack ( size 6 3/4 X 4 3/4) Write in note to buyer when you check out. 1- Fabric # Fabric 2-Color for zipper 3-What you would like to be embroider on your case- Breathe or Inhaler 4-Color thread for Breathe or Inhaler or name 5-Color thread for quilting I can help you on color choices Name maybe made smaller if you want. Fabric placement may vary as this is a made to order item. *If you need more then 1 please feel free to convo me and I will post a special listing on my shop for you. 4 cases or more I can combined shipping so you will save on shipping cost.

more >>
Etsy
$8.50 See It
Oversized Inhaler Case / Medicine Pack / Epi-Pen Case / Purse

These cases are custom made to your specifications. They are intended to hold an inhaler with chamber, two epi-pens and 2-4 benedryl packets. They are different than the other Alert Purses because they are not flat. These have a square bottom and will hold more. I started creating Alert Purses for my daughter to wear with dresses. She loves the waist pack cases but, they just don't go great with dresses and skirts. This design is custom made and you and your child can choose the fabrics and colors and what type of strap you'd like. I can leave the strap off all together and add a loop for a carbineer clip to clip on to a belt loop or back pack as well. Typically the cases are not padded but, it can be requested. If you would like the case to be insulated, you can add that to your order here: https://www.etsy.com/listing/160882532/add-on-insulation-for-non-stretch?ref=shop home active The inside is fully lined. They are designed to be worn across the chest. The case typically measures approximately 6-7" wide by 9-10" tall. PLEASE: Do not sell your child on one of the images above. I do not purchase fabrics in large quantities and more than likely could not duplicate the above pitcures. Your child will be much more excited about a case that she helped to design. Let her pick the fabrics, designs, ribbons, etc... Please see the top of the front page before ordering for current turn around times.

more >>
Etsy
$37.95 See It
camouflage inhaler case

The Ezkeeper is designed to hold one of four Asthmatic Inhalers and to keep the mouth piece clean from debris they can be attached to your keys, belt loops or purse and or backpack. Colorful designs are available to match your personality or your outfit so you won’t feel embarrass to carry your inhaler with you when you need it most. It is a perfect gift for someone you know who has to carry their Inhaler with them who knows you might save there life Some day. To see what we have to offer go to www.ezkeeper.net 651-434-9894 Thank you for looking at this add

more >>
Etsy
$15.00 See It
Pre-Made Inhaler Case / Medicine Pack / Epi-Pen Case / Alert Purse

Pre-Made Over-sized Alert Purse. Will hold inhaler, chamber and two epi-pens. Please include how long you need the strap to be or the height of the person who will carry it. This case is not insulated or padded. It does have a square bottom with a plastic insert sewn in the bottom for stability.

more >>
Etsy
$37.95 See It
Owl Inhaler Case / Medicine Pack / Epi-Pen Case / Owl Purse

These cases are custom made to your specifications. They are intended to hold an inhaler with chamber or two epi-pens and two easy measure benedryls. I can add a pocket on the back for an ID, cell phone, inhaler or other small item. With the new design for the epi-pens and a case of 3rd grade bullies, I couldn't find an epi-pen case that would easily hide under clothing and fit two of the new epi-pens along with two doses of easy measure Benadryl. So, out of necessity, I started sewing! My kids love that they were able to create their own designs for their cases and I have had fun helping other kids create their own custom epi-pen cases. This new design was created for my daughter to wear with dresses. She loves the fanny pack cases but, they just don't go great with dresses and skirts. This design is custom made. You can choose the fabrics and colors and what type of strap you'd like. I can leave the strap off all together and add a loop for a carbineer clip to clip on to a belt loop or back pack as well. The top zippers shut. The inside is fully lined with a layer of fabric over batting or fleece. They are designed to be worn across the chest. I will need to know your color preferences and about the length that the strap needs to be. The case measures approximately 5-6" wide by 8-9" tall. I can make it smaller, like the last picture. The 3rd picture above is to show you the difference in sizes from the other owl case I make and this case in it's regular size. PLEASE: Do not sell your child on one of the images above. I do not purchase fabrics in large quantities. Your child will be much more excited about a case that she helped to design. Let her pick the fabrics. Once you place your order, I will contact you with instructions for designing. Please check the message center for my shop at the top of the main page for my turn current around times.

more >>
Etsy
$32.95 See It
Padded Asthma Inhaler Case - Medicine Inhaler Case - MP3 Case - Small Toiletries Case

Keep medical inhalers safe and clean in this discrete asthma inhaler case. Carry it in your purse, or send it to school with a child for their medicines or inhailers. I make these from upcycled men's dress shirt cuffs. They are sturdy, fully lined and very lightly padded. Tailored look makes it a perfect gift for men or boys. Or use it as an MP3 case....... earphone case..... toiletries holder.... coin purse...... There are many possibilities but only one case so order it now! The outer dimensions are approximately 4 3/4" x 3" X 1/4". These are in a brown stripe fabric. I have more colors and patterns coming soon. If you are looking for a different color or pattern, with or without embellishments, message me with your prefrences and I'll be pleased to let you know how I can meet those needs. Come and see the rest of my shop here http://www.etsy.com/shop/TheCreativeHearth?ref=si shop Thank you for stopping by!

more >>
Etsy
$7.45 See It
Inhaler Holder, size A (W-IHA-003), inhaler holder keychain, women kids accessory, inhaler cozy, inhaler case

The ORIGINAL crochet keychain asthma inhaler holder since 2008! Turn a necessity into a striking fashion accessory! Designed and handmade by BeaG. © All rights reserved. PRODUCT INFORMATION: - Size A (see below). - My inhaler holders are made to fit snugly. Their sizes are accurate and they don’t shrink. - Brown (taupe) and aqua blue. - Please note that colours might show slightly different on different computer screens. - Made of cotton yarn. - Mouthpiece opens, so the inhaler can be used without taking it out of the holder. - Closes with a button. - Has got a snap hook, so you can attach it to your bag, purse, backpack, belt, etc.. - Is washable (preferably by hand). YOU WILL RECEIVE the inhaler holder shown in the first two pictures. The products in the extra pictures are not included in this sale. The inhaler is not included either. CUSTOM ORDERS: I offer custom inhaler holders in the colours of your choice (if available), without extra charge. Just contact me with your wishes, before (!) making a purchase. My Inhaler Holders COME IN 3 SIZES: * SIZE A inhalers (see pictures): - shape: more or less straight angle, frontside tube is flat, flattened (oval) mouthpiece. - length (including meds canister): 3 1/8" (8 cm) max. - width (tube plus mouthpiece): 1 3/4" (4,5 cm) max. - tube circumference: 4" (10 cm). * SIZE B inhalers (see pictures): - (same as size A, only a bit shorter.) - length (including meds canister) 2 3/8" (6 cm) max. * SIZE C inhalers: - shape: no straight angle, round tube, round mouthpiece. - length (including meds canister): 3" (7,5 cm). - width (tube plus mouthpiece): 2" (5 cm). - tube circumference: 3 1/2" (9 cm). Want to see more inhaler holders? Go here: http://www.etsy.com/shop/WilliamsGiftshop?section id=6455138 Want to see the rest of my shop? Go here: http://www.etsy.com/shop/WilliamsGiftshop

more >>
Etsy
$17.75 See It
Inhaler Holder, size B (W-IHB-006), inhaler cozy, keychain inhaler holder, inhaler case, puffer holder, puffer cozy

The ORIGINAL crochet keychain asthma inhaler holder since 2008! Turn a necessity into a striking fashion accessory! Designed and handmade by BeaG. © All rights reserved. PRODUCT INFORMATION: - Size B (see below). - My inhaler holders are made to fit snugly. Their sizes are accurate and they don’t shrink. - Black, dark grey and hot pink. - Please note that colours might show slightly different on different computer screens. - Made of cotton yarn. - Mouthpiece opens, so the inhaler can be used without taking it out of the holder. - Closes with a button. - Has got a snap hook, so you can attach it to your bag, purse, backpack, belt, etc.. - Is washable (preferably by hand). YOU WILL RECEIVE the inhaler holder shown in the first two pictures. The products in the extra pictures are not included in this sale. The inhaler is not included either. CUSTOM ORDERS: I offer custom inhaler holders in the colours of your choice (if available), without extra charge. Just contact me with your wishes, before (!) making a purchase. My Inhaler Holders COME IN 3 SIZES: * SIZE A inhalers (see pictures): - shape: more or less straight angle, frontside tube is flat, flattened (oval) mouthpiece. - length (including meds canister): 3 1/8" (8 cm) max. - width (tube plus mouthpiece): 1 3/4" (4,5 cm) max. - tube circumference: 4" (10 cm). * SIZE B inhalers (see pictures): - (same as size A, only a bit shorter.) - length (including meds canister) 2 3/8" (6 cm) max. * SIZE C inhalers: - shape: no straight angle, round tube, round mouthpiece. - length (including meds canister): 3" (7,5 cm). - width (tube plus mouthpiece): 2" (5 cm). - tube circumference: 3 1/2" (9 cm). Want to see more inhaler holders? Go here: http://www.etsy.com/shop/WilliamsGiftshop?section id=6455138 Want to see the rest of my shop? Go here: http://www.etsy.com/shop/WilliamsGiftshop

more >>
Etsy
$17.75 See It
Inhaler Holder, size A (W-IHA-001), kids accessory, asthma, women accessory, inhaler cozy, puffer cozy, inhaler case

The ORIGINAL crochet keychain asthma inhaler holder since 2008! Turn a necessity into a striking fashion accessory! Designed and handmade by BeaG. © All rights reserved. PRODUCT INFORMATION: - Size A (see below). - My inhaler holders are made to fit snugly. Their sizes are accurate and they don’t shrink. - Brown (taupe) and soft yellow. - Please note that colours might show slightly different on different computer screens. - Made of cotton yarn. - Mouthpiece opens, so the inhaler can be used without taking it out of the holder. - Closes with a button. - Has got a snap hook, so you can attach it to your bag, purse, backpack, belt, etc.. - Is washable (preferably by hand). YOU WILL RECEIVE the inhaler holder shown in the first two pictures. The products in the extra pictures are not included in this sale. The inhaler is not included either. CUSTOM ORDERS: I offer custom inhaler holders in the colours of your choice (if available), without extra charge. Just contact me with your wishes, before (!) making a purchase. My Inhaler Holders COME IN 3 SIZES: * SIZE A inhalers (see pictures): - shape: more or less straight angle, frontside tube is flat, flattened (oval) mouthpiece. - length (including meds canister): 3 1/8" (8 cm) max. - width (tube plus mouthpiece): 1 3/4" (4,5 cm) max. - tube circumference: 4" (10 cm). * SIZE B inhalers (see pictures): - (same as size A, only a bit shorter.) - length (including meds canister) 2 3/8" (6 cm) max. * SIZE C inhalers: - shape: no straight angle, round tube, round mouthpiece. - length (including meds canister): 3" (7,5 cm). - width (tube plus mouthpiece): 2" (5 cm). - tube circumference: 3 1/2" (9 cm). Want to see more inhaler holders? Go here: http://www.etsy.com/shop/WilliamsGiftshop?section id=6455138 Want to see the rest of my shop? Go here: http://www.etsy.com/shop/WilliamsGiftshop

more >>
Etsy
$17.75 See It
blue jean color inhaler case

The Ezkeeper is designed to hold one of four Asthmatic inhaler for your keys, belt loops or purse and or backpack. And can be designed to hold other sizes as well at no extra cost. To see the different sizes please go to www.ezkeeper.net The Ezkeeper is designed to help keep your inhalers mouth piece clean from debree. Colorful designs are available to match your personality or your outfit so you won’t feel embarrass to carry your inhaler with you when you need it most. It is a perfect gift for someone you know who has to carry there inhaler with them who knows you might save there life some day

more >>
Etsy
$15.00 See It
Inhaler Holder, size C (W-IHC-001), women men kids accessory, asthma, inhaler cozy, inhaler case, puffer cozy

The ORIGINAL crochet keychain asthma inhaler holder since 2008! Turn a necessity into a striking fashion accessory! Designed and handmade by BeaG. © All rights reserved. PRODUCT INFORMATION: - Size C (see below). - My inhaler holders are made to fit snugly. Their sizes are accurate and they don’t shrink. - Brown (taupe) and aqua blue. - Please note that colours might show slightly different on different computer screens. - Made of cotton yarn. - Mouthpiece opens, so the inhaler can be used without taking it out of the holder. - Closes with a button. - Has got a snap hook, so you can attach it to your bag, purse, backpack, belt, etc.. - Is washable (preferably by hand). YOU WILL RECEIVE the inhaler holder shown in the first two pictures. The products in the extra pictures are not included in this sale. The inhaler is not included either. CUSTOM ORDERS: I offer custom inhaler holders in the colours of your choice (if available), without extra charge. Just contact me with your wishes, before (!) making a purchase. My Inhaler Holders COME IN 3 SIZES: * SIZE A inhalers: - shape: more or less straight angle, frontside tube is flat, flattened (oval) mouthpiece. - length (including meds canister): 3 1/8" (8 cm) max. - width (tube plus mouthpiece): 1 3/4" (4,5 cm) max. - tube circumference: 4" (10 cm). * SIZE B inhalers: - (same as size A, only a bit shorter.) - length (including meds canister) 2 3/8" (6 cm) max. * SIZE C inhalers (see pictures): - shape: no straight angle, round tube, round mouthpiece. - length (including meds canister): 3" (7,5 cm). - width (tube plus mouthpiece): 2" (5 cm). - tube circumference: 3 1/2" (9 cm). Want to see more inhaler holders? Go here: http://www.etsy.com/shop/WilliamsGiftshop?section id=6455138 Want to see the rest of my shop? Go here: http://www.etsy.com/shop/WilliamsGiftshop

more >>
Etsy
$17.75 See It
Inhaler Holder, size B (W-IHB-001), inhaler cozy, keychain inhaler holder, inhaler case, puffer holder, puffer cozy

The ORIGINAL crochet keychain asthma inhaler holder since 2008! Turn a necessity into a striking fashion accessory! Designed and handmade by BeaG. © All rights reserved. PRODUCT INFORMATION: - Size B (see below). - My inhaler holders are made to fit snugly. Their sizes are accurate and they don’t shrink. - Brown (taupe) and aqua blue. - Please note that colours might show slightly different on different computer screens. - Made of cotton yarn. - Mouthpiece opens, so the inhaler can be used without taking it out of the holder. - Closes with a button. - Has got a snap hook, so you can attach it to your bag, purse, backpack, belt, etc.. - Is washable (preferably by hand). YOU WILL RECEIVE the inhaler holder shown in the first two pictures. The products in the extra pictures are not included in this sale. The inhaler is not included either. CUSTOM ORDERS: I offer custom inhaler holders in the colours of your choice (if available), without extra charge. Just contact me with your wishes, before (!) making a purchase. My Inhaler Holders COME IN 3 SIZES: * SIZE A inhalers (see pictures): - shape: more or less straight angle, frontside tube is flat, flattened (oval) mouthpiece. - length (including meds canister): 3 1/8" (8 cm) max. - width (tube plus mouthpiece): 1 3/4" (4,5 cm) max. - tube circumference: 4" (10 cm). * SIZE B inhalers (see pictures): - (same as size A, only a bit shorter.) - length (including meds canister) 2 3/8" (6 cm) max. * SIZE C inhalers: - shape: no straight angle, round tube, round mouthpiece. - length (including meds canister): 3" (7,5 cm). - width (tube plus mouthpiece): 2" (5 cm). - tube circumference: 3 1/2" (9 cm). Want to see more inhaler holders? Go here: http://www.etsy.com/shop/WilliamsGiftshop?section id=6455138 Want to see the rest of my shop? Go here: http://www.etsy.com/shop/WilliamsGiftshop

more >>
Etsy
$17.75 See It
Inhaler Holder, size A (W-IHA-004), inhaler cozy, keychain inhaler holder, inhaler case, puffer holder, puffer cozy

The ORIGINAL crochet keychain asthma inhaler holder since 2008! Turn a necessity into a striking fashion accessory! Designed and handmade by BeaG. © All rights reserved. PRODUCT INFORMATION: - Size A (see below). - My inhaler holders are made to fit snugly. Their sizes are accurate and they don’t shrink. - Brown (taupe) and hot pink. - Please note that colours might show slightly different on different computer screens. - Made of cotton yarn. - Mouthpiece opens, so the inhaler can be used without taking it out of the holder. - Closes with a button. - Has got a snap hook, so you can attach it to your bag, purse, backpack, belt, etc.. - Is washable (preferably by hand). YOU WILL RECEIVE the inhaler holder shown in the first two pictures. The products in the extra pictures are not included in this sale. The inhaler is not included either. CUSTOM ORDERS: I offer custom inhaler holders in the colours of your choice (if available), without extra charge. Just contact me with your wishes, before (!) making a purchase. My Inhaler Holders COME IN 3 SIZES: * SIZE A inhalers (see pictures): - shape: more or less straight angle, frontside tube is flat, flattened (oval) mouthpiece. - length (including meds canister): 3 1/8" (8 cm) max. - width (tube plus mouthpiece): 1 3/4" (4,5 cm) max. - tube circumference: 4" (10 cm). * SIZE B inhalers (see pictures): - (same as size A, only a bit shorter.) - length (including meds canister) 2 3/8" (6 cm) max. * SIZE C inhalers: - shape: no straight angle, round tube, round mouthpiece. - length (including meds canister): 3" (7,5 cm). - width (tube plus mouthpiece): 2" (5 cm). - tube circumference: 3 1/2" (9 cm). Want to see more inhaler holders? Go here: http://www.etsy.com/shop/WilliamsGiftshop?section id=6455138 Want to see the rest of my shop? Go here: http://www.etsy.com/shop/WilliamsGiftshop

more >>
Etsy
$17.75 See It
Inhaler Holder, size A (W-IHA-009), keychain inhaler holder, women teen girls accessory, inhaler cozy, inhaler case

The ORIGINAL crochet keychain asthma inhaler holder since 2008! Turn a necessity into a striking fashion accessory! Designed and handmade by BeaG. © All rights reserved. PRODUCT INFORMATION: - Size A (see below). - My inhaler holders are made to fit snugly. Their sizes are accurate and they don’t shrink. - Lilac and purple. - Please note that colours might show slightly different on different computer screens. - Made of cotton yarn. - Mouthpiece opens, so the inhaler can be used without taking it out of the holder. - Closes with a button. - Has got a snap hook, so you can attach it to your bag, purse, backpack, belt, etc.. - Is washable (preferably by hand). YOU WILL RECEIVE the inhaler holder shown in the first two pictures. The products in the extra pictures are not included in this sale. The inhaler is not included either. CUSTOM ORDERS: I offer custom inhaler holders in the colours of your choice (if available), without extra charge. Just contact me with your wishes, before (!) making a purchase. My Inhaler Holders COME IN 3 SIZES: * SIZE A inhalers (see pictures): - shape: more or less straight angle, frontside tube is flat, flattened (oval) mouthpiece. - length (including meds canister): 3 1/8" (8 cm) max. - width (tube plus mouthpiece): 1 3/4" (4,5 cm) max. - tube circumference: 4" (10 cm). * SIZE B inhalers (see pictures): - (same as size A, only a bit shorter.) - length (including meds canister) 2 3/8" (6 cm) max. * SIZE C inhalers: - shape: no straight angle, round tube, round mouthpiece. - length (including meds canister): 3" (7,5 cm). - width (tube plus mouthpiece): 2" (5 cm). - tube circumference: 3 1/2" (9 cm). Want to see more inhaler holders? Go here: http://www.etsy.com/shop/WilliamsGiftshop?section id=6455138 Want to see the rest of my shop? Go here: http://www.etsy.com/shop/WilliamsGiftshop

more >>
Etsy
$17.75 See It
Inhaler Holder, size B (W-IHB-003), inhaler cozy, keychain inhaler holder, inhaler case, puffer holder, puffer cozy

The ORIGINAL crochet keychain asthma inhaler holder since 2008! Turn a necessity into a striking fashion accessory! Designed and handmade by BeaG. © All rights reserved. PRODUCT INFORMATION: - Size B (see below). - My inhaler holders are made to fit snugly. Their sizes are accurate and they don’t shrink. - Blue and green. - Please note that colours might show slightly different on different computer screens. - Made of cotton yarn. - Mouthpiece opens, so the inhaler can be used without taking it out of the holder. - Closes with a button. - Has got a snap hook, so you can attach it to your bag, purse, backpack, belt, etc.. - Is washable (preferably by hand). YOU WILL RECEIVE the inhaler holder shown in the first two pictures. The products in the extra pictures are not included in this sale. The inhaler is not included either. CUSTOM ORDERS: I offer custom inhaler holders in the colours of your choice (if available), without extra charge. Just contact me with your wishes, before (!) making a purchase. My Inhaler Holders COME IN 3 SIZES: * SIZE A inhalers (see pictures): - shape: more or less straight angle, frontside tube is flat, flattened (oval) mouthpiece. - length (including meds canister): 3 1/8" (8 cm) max. - width (tube plus mouthpiece): 1 3/4" (4,5 cm) max. - tube circumference: 4" (10 cm). * SIZE B inhalers (see pictures): - (same as size A, only a bit shorter.) - length (including meds canister) 2 3/8" (6 cm) max. * SIZE C inhalers: - shape: no straight angle, round tube, round mouthpiece. - length (including meds canister): 3" (7,5 cm). - width (tube plus mouthpiece): 2" (5 cm). - tube circumference: 3 1/2" (9 cm). Want to see more inhaler holders? Go here: http://www.etsy.com/shop/WilliamsGiftshop?section id=6455138 Want to see the rest of my shop? Go here: http://www.etsy.com/shop/WilliamsGiftshop

more >>
Etsy
$17.75 See It
Inhaler Holder, size B (W-IHB-007), keychain inhaler holder, inhaler case, inhaler cozy, puffer holder, puffer cozy

The ORIGINAL crochet keychain asthma inhaler holder since 2008! Turn a necessity into a striking fashion accessory! Designed and handmade by BeaG. © All rights reserved. PRODUCT INFORMATION: - Size B (see below). - My inhaler holders are made to fit snugly. Their sizes are accurate and they don’t shrink. - Black, dark grey and teal blue. - Please note that colours might show slightly different on different computer screens. - Made of cotton yarn. - Mouthpiece opens, so the inhaler can be used without taking it out of the holder. - Closes with a button. - Has got a snap hook, so you can attach it to your bag, purse, backpack, belt, etc.. - Is washable (preferably by hand). YOU WILL RECEIVE the inhaler holder shown in the first two pictures. The products in the extra pictures are not included in this sale. The inhaler is not included either. CUSTOM ORDERS: I offer custom inhaler holders in the colours of your choice (if available), without extra charge. Just contact me with your wishes, before (!) making a purchase. My Inhaler Holders COME IN 3 SIZES: * SIZE A inhalers (see pictures): - shape: more or less straight angle, frontside tube is flat, flattened (oval) mouthpiece. - length (including meds canister): 3 1/8" (8 cm) max. - width (tube plus mouthpiece): 1 3/4" (4,5 cm) max. - tube circumference: 4" (10 cm). * SIZE B inhalers (see pictures): - (same as size A, only a bit shorter.) - length (including meds canister) 2 3/8" (6 cm) max. * SIZE C inhalers: - shape: no straight angle, round tube, round mouthpiece. - length (including meds canister): 3" (7,5 cm). - width (tube plus mouthpiece): 2" (5 cm). - tube circumference: 3 1/2" (9 cm). Want to see more inhaler holders? Go here: http://www.etsy.com/shop/WilliamsGiftshop?section id=6455138 Want to see the rest of my shop? Go here: http://www.etsy.com/shop/WilliamsGiftshop

more >>
Etsy
$17.75 See It
Inhaler Holder, size A (W-IHA-027), inhaler case, inhaler keychain, puffer cozy, puffer keychain, asthma inhaler holder, asthma accessory

The ORIGINAL crochet keychain asthma inhaler holder since 2008! Turn a necessity into a striking fashion accessory! Designed and handmade by BeaG. © All rights reserved. PRODUCT INFORMATION: - Size A (see below). - My inhaler holders are made to fit snugly. Their sizes are accurate and they donâ t shrink. - Blue (teal) and purple (plum). - Please note that colours might show slightly different on different computer screens. - Made of cotton yarn. - Mouthpiece opens, so the inhaler can be used without taking it out of the holder. - Closes with a button. - Has got a snap hook, so you can attach it to your bag, purse, backpack, belt, etc.. - Is washable (preferably by hand). YOU WILL RECEIVE the inhaler holder shown in the first two pictures. The products in the extra pictures are not included in this sale. The inhaler is not included either. CUSTOM ORDERS: I offer custom inhaler holders in the colours of your choice (if available), without extra charge. Just contact me with your wishes, before (!) making a purchase. My Inhaler Holders COME IN 3 SIZES: * SIZE A inhalers (see pictures): - shape: more or less straight angle, frontside tube is flat, flattened (oval) mouthpiece. - length (including meds canister): 3 1/8â (8 cm) max. - width (tube plus mouthpiece): 1 3/4â (4,5 cm) max. - tube circumference: 4â (10 cm). * SIZE B inhalers (see pictures): - (same as size A, only a bit shorter.) - length (including meds canister) 2 3/8â (6 cm) max. * SIZE C inhalers: - shape: no straight angle, round tube, round mouthpiece. - length (including meds canister): 3â (7,5 cm). - width (tube plus mouthpiece): 2â (5 cm). - tube circumference: 3 1/2â (9 cm). Want to see more inhaler holders? Go here: http://www.etsy.com/shop/WilliamsGiftshop?section id=6455138 Want to see the rest of my shop? Go here: http://www.etsy.com/shop/WilliamsGiftshop

more >>
Etsy
$17.75 See It
Pax Cover, Pax Vaporizer Case, Inhaler Holder, Inhaler Cozy, Inhaler Case, hand knit in Navy Blue

Protective cover for a Pax Vaporizer Inhaler Pax Vaporizer cozy case, hand knit in Navy Blue. Also available to be custom made in a variety of colors and sizes. This model is seamless, features knit cables and a button closure. Dimensions: 4 1/8 x 1.4 x 7/8 inches Color: Navy Blue with a matching Navy Blue button. Please convo me if you prefer a button of a contrasting color. Please note: the actual color is a little deeper navy blue than it's reflected in some of the photos. It's a classic navy blue color. To see different color cases please visit "Pax Vaporizer Cases" section in my shop: https://www.etsy.com/shop/Polar1Butterfly?section id=13442803 Care: machine washable/dryable. As for any knit item, laying it flat to dry is recommended. Custom made orders are made at the time of purchase and will ship out 1-3 days after receiving payment. ❄ Everything in my shop is made in a smoke-free environment ❄

more >>
Etsy
$14.30 See It
Inhaler Holder, size A (W-IHA-018), inhaler keychain, inhaler case, inhaler cozy, women men teen boy girl accessory

The ORIGINAL crochet keychain asthma inhaler holder since 2008! Turn a necessity into a striking fashion accessory! Designed and handmade by BeaG. © All rights reserved. PRODUCT INFORMATION: - Size A (see below). - My inhaler holders are made to fit snugly. Their sizes are accurate and they don’t shrink. - White and two shades of blue. - Please note that colours might show slightly different on different computer screens. - Made of cotton yarn. - Mouthpiece opens, so the inhaler can be used without taking it out of the holder. - Closes with a button. - Has got a snap hook, so you can attach it to your bag, purse, backpack, belt, etc.. - Is washable (preferably by hand). YOU WILL RECEIVE the inhaler holder shown in the first two pictures. The products in the extra pictures are not included in this sale. The inhaler is not included either. CUSTOM ORDERS: I offer custom inhaler holders in the colours of your choice (if available), without extra charge. Just contact me with your wishes, before (!) making a purchase. My Inhaler Holders COME IN 3 SIZES: * SIZE A inhalers (see pictures): - shape: more or less straight angle, frontside tube is flat, flattened (oval) mouthpiece. - length (including meds canister): 3 1/8" (8 cm) max. - width (tube plus mouthpiece): 1 3/4" (4,5 cm) max. - tube circumference: 4" (10 cm). * SIZE B inhalers (see pictures): - (same as size A, only a bit shorter.) - length (including meds canister) 2 3/8" (6 cm) max. * SIZE C inhalers: - shape: no straight angle, round tube, round mouthpiece. - length (including meds canister): 3" (7,5 cm). - width (tube plus mouthpiece): 2" (5 cm). - tube circumference: 3 1/2" (9 cm). Want to see more inhaler holders? Go here: http://www.etsy.com/shop/WilliamsGiftshop?section id=6455138 Want to see the rest of my shop? Go here: http://www.etsy.com/shop/WilliamsGiftshop

more >>
Etsy
$17.75 See It
Inhaler Holder, size A (W-IHA-021), inhaler keychain, inhaler case, inhaler cozy, women men teen boy girl accessory

The ORIGINAL crochet keychain asthma inhaler holder since 2008! Turn a necessity into a striking fashion accessory! Designed and handmade by BeaG. © All rights reserved. PRODUCT INFORMATION: - Size A (see below). - My inhaler holders are made to fit snugly. Their sizes are accurate and they don’t shrink. - White and two shades of red. - Please note that colours might show slightly different on different computer screens. - Made of cotton yarn. - Mouthpiece opens, so the inhaler can be used without taking it out of the holder. - Closes with a button. - Has got a snap hook, so you can attach it to your bag, purse, backpack, belt, etc.. - Is washable (preferably by hand). YOU WILL RECEIVE the inhaler holder shown in the first two pictures. The products in the extra pictures are not included in this sale. The inhaler is not included either. CUSTOM ORDERS: I offer custom inhaler holders in the colours of your choice (if available), without extra charge. Just contact me with your wishes, before (!) making a purchase. My Inhaler Holders COME IN 3 SIZES: * SIZE A inhalers (see pictures): - shape: more or less straight angle, frontside tube is flat, flattened (oval) mouthpiece. - length (including meds canister): 3 1/8" (8 cm) max. - width (tube plus mouthpiece): 1 3/4" (4,5 cm) max. - tube circumference: 4" (10 cm). * SIZE B inhalers (see pictures): - (same as size A, only a bit shorter.) - length (including meds canister) 2 3/8" (6 cm) max. * SIZE C inhalers: - shape: no straight angle, round tube, round mouthpiece. - length (including meds canister): 3" (7,5 cm). - width (tube plus mouthpiece): 2" (5 cm). - tube circumference: 3 1/2" (9 cm). Want to see more inhaler holders? Go here: http://www.etsy.com/shop/WilliamsGiftshop?section id=6455138 Want to see the rest of my shop? Go here: http://www.etsy.com/shop/WilliamsGiftshop

more >>
Etsy
$17.75 See It
Search within results