1 to 20 of  100 products for jensen power760 4channel 760 watt amplifier

No exact matches found for jensen power760 4channel 760 watt amplifier

100 similar items found

0050T4 Clear Halogen Hinkley Lighting 0050T4 50 Watt -98%

Free Shipping on Orders Over $199

Hinkley Lighting, 0050T4, Bulbs, Bulbs, Halogen, Hinkley Lighting 0050T4 50 Watt Halogen T4 Bi-Pin Base Bulb Average Life: 2,000 Hours Candle Power (CP): 930 Beam Spread: 360 Degrees Base: Bi-Pin

more >>
Build.com
$328.50 $5.95 See It
LED-8024E42 45 Watt Medium Base LED Post Top / Site / Wall Pack Retrofit Replacement for HID 4200K

LED retrofit design to replace MH and HPS lamps up to 175 Watt. Fully encapsulated, 45 Watt LED with E26 edison base. Compact size and 360 degree LED placement allows suitable for enclosed post top, shoe box and other typical HID fixtures giving full illumination. Fully encapsulated, 100 - 277 VAC (US) / 120-347 VAC (CA), E26 mounting that integrates energy saving LED technology into a powerful yet energy saving SMD LED 'street light' lamp.Features: 45 Watt Power consumption Replaces up to a 175 Watt HID 360 Degrees 120-277VAC Not Dimmable 80 CRI 50,000 hr rated lifetime Operating Temp -40 F to 122 F Double insulated UL Classified Damp 5 Year Warranty Markets & ApplicationsLED Post top / Site / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. Site / Roadway / Post Top Wall packs (where applicable) Security lighting Cold Display Bollard Post Top Outdoor Area Lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 3.15" x 3.15" x 9.22" Specification Sheets & Brochures LED-8024 Spec Sheet LED-8024 Installation Sheet Warranty Information Specifications Bulb Type Cylindrical Bulb Material Polycarbon / Aluminum Lumens 4978 (4200K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 4200K Warm White Lumens Per Watt 110 (4200K) Base Type Medium (E26) Replaces 170 Watts HID Lifetime 50,000 Hrs Wattage 45 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$191.99 See It
0020T4 Clear Halogen Hinkley Lighting 0020T4 20 Watt -99%

Free Shipping on Orders Over $199

Hinkley Lighting, 0020T4, Bulbs, Bulbs, Halogen, Hinkley Lighting 0020T4 20 Watt Halogen T4 Bi-Pin Base Bulb Average Life: 2,000 Hours Candle Power (CP): 320 Beam Spread: 360 Degrees Base: Bi-Pin

more >>
Build.com
$658.50 $5.95 See It
LED-8024E57 45 Watt Medium Base LED Post Top / Site / Wall Pack Retrofit Replacement for HID 5700K

LED retrofit design to replace MH and HPS lamps up to 175 Watt. Fully encapsulated, 45 Watt LED with E26 edison base. Compact size and 360 degree LED placement allows suitable for enclosed post top, shoe box and other typical HID fixtures giving full illumination. Fully encapsulated, 100 - 277 VAC (US) / 120-347 VAC (CA), E26 mounting that integrates energy saving LED technology into a powerful yet energy saving SMD LED 'street light' lamp.Features: 45 Watt Power consumption Replaces up to a 175 Watt HID 360 Degrees 120-277VAC Not Dimmable 80 CRI 50,000 hr rated lifetime Operating Temp -40 F to 122 F Double insulated UL Classified Damp 5 Year Warranty Markets & ApplicationsLED Post top / Site / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. Site / Roadway / Post Top Wall packs (where applicable) Security lighting Cold Display Bollard Post Top Outdoor Area Lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 3.15" x 3.15" x 9.22" Specification Sheets & Brochures LED-8024 Spec Sheet LED-8024 Installation Sheet Warranty Information Specifications Bulb Type Cylindrical Bulb Material Polycarbon / Aluminum Lumens 5028 (5700K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 5700K Warm White Lumens Per Watt 110 (5700K) Base Type Medium (E26) Replaces 170 Watts HID Lifetime 50,000 Hrs Wattage 45 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$191.99 See It
0010T4 Clear Halogen Hinkley Lighting 0010T4 10 Watt -64%

Free Shipping on Orders Over $199

Hinkley Lighting, 0010T4, Bulbs, Bulbs, Halogen, Hinkley Lighting 0010T4 10 Watt Halogen T4 Bi-Pin Base Bulb Average Life: 2,000 Hours Candle Power (CP): 140 Beam Spread: 360 Degrees Base: Bi-Pin

more >>
Build.com
$16.59 $5.95 See It
LED-8027M Mogul Base 100 Watt LED Post Top / Site / Wall Pack Retrofit Replacement for HID 4200K

LED retrofit design to replace MH and HPS lamps up to 250 Watt. Fully encapsulated, 100 Watt LED with E39 Mogul Base. Compact size and 360 degree LED placement allows suitable for enclosed post top, shoe box and other typical HID fixtures giving full illumination. Fully encapsulated, 100 - 277 VAC (US) / 120-347 VAC (CA), E26 mounting that integrates energy saving LED technology into a powerful yet energy saving SMD LED 'street light' lamp.Features: 100 Watt Power consumption Replaces up to a 250 Watt HID 360 Degrees 120-277VAC Not Dimmable 80 CRI 50,000 hr rated lifetime Operating Temp -40 F to 122 F Double insulated UL Classified Damp 5 Year Warranty Markets & ApplicationsLED Post top / Site / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. Site / Roadway / Post Top Wall packs (where applicable) Security lighting Cold Display Bollard Post Top Outdoor Area Lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 4.9" x 4.9" x 11.9" Specification Sheets & Brochures LED-8027 Spec Sheet LED-8027 Installation Sheet Warranty Information Specifications Bulb Type Cylindrical Bulb Material Polycarbon / Aluminum Lumens 8250 (4200K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 4200K Warm White Lumens Per Watt 82 (4200K) Base Type Mogul (E39) Replaces 250 Watts HID Lifetime 50,000 Hrs Wattage 100 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$342.74 See It
G80-S45 45W 45 Watt Samsung LED Post Top Street Lamp Wall Pack Canopy HID HPS Replacement Retrofit Bulb Lamp Light

G80-S45 45W 45 Watt LED Post Top Street Lamp Wall Pack Canopy HID HPS Replacement Retrofit Bulb Lamp Light. Fully sealed, 100-305 Volt, available in 2800K-3200K Soft Warm, 4000K-4500K Neutral White, or 5000K-6000K Daylight color temperatures. Perfect for bollard, post top, wall pack, pole, parking lot, parking garage, canopy, shoebox, street, courtyard, and other types of metal halide HID MH, mercury vapor MV, high pressure sodium HPS, or low pressure sodium LPS lighting fixtures. 45 watts, 100-305 voltage range, .9 power factor, 3100 lumen output, E26/E27 or E39/E40 socket base, 50,000+ hour lamp life, CE, ROHS, FCC, UL certifications, 70+ CRI, 360 beam angle, and includes a 2 year warranty.

more >>
ShineRetrofits.com
$146.67 See It
0020T3 N/A Halogen Hinkley Lighting 0020T3 20 Watt -40%

Free Shipping on Orders Over $199

Hinkley Lighting, 0020T3, Bulbs, Bulbs, Halogen, Hinkley Lighting 0020T3 20 Watt Halogen T3 Bi-Pin Base Bulb Average Life: 2,000 Hours Candle Power (CP): 320 Beam Spread: 360 degrees Base: Bi-Pin

more >>
Build.com
$9.93 $5.95 See It
LED-8024M30 Mogul Base 45 Watt LED Post Top / Site / Wall Pack Retrofit Replacement for HID 3000K

LED retrofit design to replace MH and HPS lamps up to 175 Watt. Fully encapsulated, 45 Watt LED with E39 Mogul Base. Compact size and 360 degree LED placement allows suitable for enclosed post top, shoe box and other typical HID fixtures giving full illumination. Fully encapsulated, 100 - 277 VAC (US) / 120-347 VAC (CA), E26 mounting that integrates energy saving LED technology into a powerful yet energy saving SMD LED 'street light' lamp.Features: 45 Watt Power consumption Replaces up to a 175 Watt HID 360 Degrees 120-277VAC Not Dimmable 80 CRI 50,000 hr rated lifetime Operating Temp -40 F to 122 F Double insulated UL Classified Damp 5 Year Warranty Markets & ApplicationsLED Post top / Site / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. Site / Roadway / Post Top Wall packs (where applicable) Security lighting Cold Display Bollard Post Top Outdoor Area Lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 3.15" x 3.15" x 9.22" Specification Sheets & Brochures LED-8024 Spec Sheet LED-8024 Installation Sheet Warranty Information Specifications Bulb Type Cylindrical Bulb Material Polycarbon / Aluminum Lumens 3850 (3000K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 3000K Warm White Lumens Per Watt 85 (3000K) Base Type Mogul (E39) Replaces 170 Watts HID Lifetime 50,000 Hrs Wattage 45 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$191.99 See It
LED-8001M30 Mogul Base 35 Watt LED Site / Wall Pack / Roadway Retrofit Replacement for HID 3000K

LED retrofit design to replace MH and HPS lamps up to 150 Watt. Fully encapsulated, 35 Watt LED with E39 Mogul Base. Robust construction with rotatable base enables user to accuratly direct LED output to target. Suitable for fully enclsed Wall Packs, Roadway, Shoe Box and any other typical HID fixture. Fully encapsulated, 100 - 277 VAC (US) / 120-347 VAC (CA), E39 mounting that integrates energy saving LED technology into a powerful yet energy saving SMD LED 'street light' lamp.Features: 35 Watt Power consumption Replaces up to a 150 Watt HID 180 Degrees 120-277VAC Not Dimmable 80 CRI 50,000 hr rated lifetime Operating Temp -40 F to 122 F UL Classified Damp 5 Year Warranty Markets & ApplicationsLED Post top / Wall Pack / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. Site / Roadway / Wall Pack Wall packs (where applicable) Security lighting Cold Display Bollard Post Top Outdoor Area Lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 3.5" x 11.3" Specification Sheets & Brochures LED-8001 Spec Sheet LED-8001 Installation Sheet Warranty Information Specifications Bulb Type Cylindrical Bulb Material Polycarbon / Aluminum Lumens 2500 (3000K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 3000K Warm White Lumens Per Watt 72 (3000K) Base Type Mogul (E39) Replaces 150 Watts HID Lifetime 50,000 Hrs Wattage 35 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$190.49 See It
LED-8024M57 Mogul Base 45 Watt LED Post Top / Site / Wall Pack Retrofit Replacement for HID 5700K

LED retrofit design to replace MH and HPS lamps up to 175 Watt. Fully encapsulated, 45 Watt LED with E39 Mogul Base. Compact size and 360 degree LED placement allows suitable for enclosed post top, shoe box and other typical HID fixtures giving full illumination. Fully encapsulated, 100 - 277 VAC (US) / 120-347 VAC (CA), E26 mounting that integrates energy saving LED technology into a powerful yet energy saving SMD LED 'street light' lamp.Features: 45 Watt Power consumption Replaces up to a 175 Watt HID 360 Degrees 120-277VAC Not Dimmable 80 CRI 50,000 hr rated lifetime Operating Temp -40 F to 122 F Double insulated UL Classified Damp 5 Year Warranty Markets & ApplicationsLED Post top / Site / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. Site / Roadway / Post Top Wall packs (where applicable) Security lighting Cold Display Bollard Post Top Outdoor Area Lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 3.15" x 3.15" x 9.22" Specification Sheets & Brochures LED-8024 Spec Sheet LED-8024 Installation Sheet Warranty Information Specifications Bulb Type Cylindrical Bulb Material Polycarbon / Aluminum Lumens 5028 (5700K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 5700K Daylight Lumens Per Watt 111 (5700K) Base Type Mogul (E39) Replaces 175 Watts HID Lifetime 50,000 Hrs Wattage 45 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$191.99 See It
LED-8029E42 Medium Base 24 Watt LED Post Top / Bollard / Wall Pack Retrofit Replacement for HID 4200K

LED retrofit design to replace MH and HPS lamps up to 100 Watt. Fully encapsulated, 24 Watt LED with E26 Medium Base. Compact size and 360 degree LED placement allows suitable for enclosed Bollards, and other typical HID fixtures giving full illumination. Fully encapsulated, 100 - 277 VAC (US) / 120-347 VAC (CA), E26 mounting that integrates energy saving LED technology into a powerful yet energy saving SMD LED 'street light' lamp.Features: 24 Watt Power consumption Replaces up to a 100 Watt HID 360 Degrees 120-277VAC Not Dimmable 80 CRI 50,000 hr rated lifetime Operating Temp -40 F to 122 F UL Classified Damp 5 Year Warranty Markets & ApplicationsLED Post top / Bollard / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. Site / Roadway / Post Top Wall packs (where applicable) Security lighting Cold Display Bollard Post Top Outdoor Area Lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 3.5" x 3.5" x 7.1" Specification Sheets & Brochures LED-8029 Spec Sheet LED-8029 Installation Sheet Warranty Information Specifications Bulb Type Cylindrical Bulb Material Polycarbon / Aluminum Lumens 2300 (4200K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 4200K Cool White Lumens Per Watt 95 (4200K) Base Type Medium (E26) Replaces 100 Watts HID Lifetime 50,000 Hrs Wattage 24 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$110.62 See It
LED-8023 35 Watt LED Post Top / Site / Wall Pack Retrofit Replacement for HID 5700K

LED retrofit design to replace MH and HPS lamps up to 150 Watt. Fully encapsulated, 35 Watt LED with E26 edison base. Compact size and 360 degree LED placement allows suitable for enclosed post top, shoe box and other typical HID fixtures giving full illumination. Fully encapsulated, 100 - 277 VAC (US) / 120-347 VAC (CA), E26 mounting that integrates energy saving LED technology into a powerful yet energy saving SMD LED 'street light' lamp.Markets & ApplicationsLED Post top / Site / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. Site / Roadway / Post Top Wall packs (where applicable) Security lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 4.7" x 4.7" x 8.9" Specification Sheets & Brochures LED-8023 Spec Sheet LED-8023 Installation Sheet Warranty Information Specifications Bulb Type Cylindrical Bulb Material Polycarbon / Aluminum Lumens 3765 (5700K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 5700K Daylight Lumens Per Watt 112 (5700K) Base Type Medium (E26) Replaces 150 Watts HPS Lifetime 50,000 Hrs Wattage 35 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$166.99 See It
LED-8001M42 Mogul Base 35 Watt LED Site / Wall Pack / Roadway Retrofit Replacement for HID 4200K

LED retrofit design to replace MH and HPS lamps up to 150 Watt. Fully encapsulated, 35 Watt LED with E39 Mogul Base. Robust construction with rotatable base enables user to accuratly direct LED output to target. Suitable for fully enclsed Wall Packs, Roadway, Shoe Box and any other typical HID fixture. Fully encapsulated, 100 - 277 VAC (US) / 120-347 VAC (CA), E39 mounting that integrates energy saving LED technology into a powerful yet energy saving SMD LED 'street light' lamp.Features: 35 Watt Power consumption Replaces up to a 150 Watt HID 180 Degrees 120-277VAC Not Dimmable 80 CRI 50,000 hr rated lifetime Operating Temp -40 F to 122 F UL Classified Damp 5 Year Warranty Markets & ApplicationsLED Post top / Wall Pack / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. Site / Roadway / Wall Pack Wall packs (where applicable) Security lighting Cold Display Bollard Post Top Outdoor Area Lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 3.5" x 11.3" Specification Sheets & Brochures LED-8001 Spec Sheet LED-8001 Installation Sheet Warranty Information Specifications Bulb Type Cylindrical Bulb Material Polycarbon / Aluminum Lumens 2500 (4200K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 4200K Warm White Lumens Per Watt 72 (4200K) Base Type Mogul (E39) Replaces 150 Watts HID Lifetime 50,000 Hrs Wattage 35 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$190.49 See It
LED-8035E57 Medium Base 60 Watt LED Site / Wall Pack / Roadway Retrofit Replacement for HID 5700K

LED retrofit design to replace MH and HPS lamps up to 175 Watt. Fully encapsulated, 60 Watt LED with E26 Medium Base. Design features both down and side mounted LEDs delivering a wide, uniform light distribution. Suitable for fully enclosed garage, low bay and other area fixtures. Fully encapsulated, 100 - 277 VAC E26 mounting that integrates energy saving LED technology into a powerful yet energy saving LED Low Bay/Garage light..Features: 60 Watt Power consumption Replaces up to a 175 Watt HID 360 Degrees 120-277VAC Not Dimmable 80 CRI 50,000 hr rated lifetime Operating Temp -40 F to 122 F UL Classified Damp 5 Year Warranty Markets & ApplicationsLED Garage / Low Bay / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. Site / Low Bay / Garage Security lighting Outdoor Area Lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 5.91" x 7.87" Specification Sheets & Brochures LED-8035 Spec Sheet LED-8035 Installation Sheet Warranty Information Specifications Bulb Type HID Rerofit Bulb Material Polycarbon / Aluminum Lumens 5704 (5700K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 5700K Daylight Lumens Per Watt 95 (5700K) Base Type Medium (E26) Replaces 175 Watts HID Lifetime 50,000 Hrs Wattage 60 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$232.22 See It
LED-8023 35 Watt LED Post Top / Site / Wall Pack Retrofit Replacement for HID 4200K

LED retrofit design to replace MH and HPS lamps up to 150 Watt. Fully encapsulated, 35 Watt LED with E26 edison base. Compact size and 360 degree LED placement allows suitable for enclosed post top, shoe box and other typical HID fixtures giving full illumination. Fully encapsulated, 100 - 277 VAC (US) / 120-347 VAC (CA), E26 mounting that integrates energy saving LED technology into a powerful yet energy saving SMD LED 'street light' lamp.Markets & ApplicationsLED Post top / Site / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. Site / Roadway / Post Top Wall packs (where applicable) Security lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 4.7" x 4.7" x 8.9" Specification Sheets & Brochures LED-8023 Spec Sheet LED-8023 Installation Sheet Warranty Information Specifications Bulb Type Cylindrical Bulb Material Polycarbon / Aluminum Lumens 3765 (4200K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 4200K Cool White Lumens Per Watt 107 (4200K) Base Type Medium (E26) Replaces 150 Watts HPS Lifetime 50,000 Hrs Wattage 35 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$166.99 See It
LED-8036M57 Mogul Base 100 Watt LED High Bay / Low Bay / Site Retrofit Replacement for HID 5700K

LED retrofit design to replace MH and HPS lamps up to 250 Watt. Fully encapsulated, 100 Watt LED with E39 Mogul Base. Design features both down and side mounted LEDs delivering a wide, uniform light distribution. Suitable for fully enclosed garage, High bay, Low Bay and other area fixtures. Fully encapsulated, 100 - 277 VAC E39 mounting that integrates energy saving LED technology into a powerful yet energy saving LED Low Bay/Garage light..Features: 100 Watt Power consumption Replaces up to a 250 Watt HID 360 Degrees 120-277VAC Not Dimmable 80 CRI 50,000 hr rated lifetime Operating Temp -40 F to 122 F UL Classified Damp 5 Year Warranty Markets & ApplicationsLED Garage / High Bay / Low Bay / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. High Bay / Low Bay / Garage Security lighting Outdoor Area Lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 7.6" x 7.9" Specification Sheets & Brochures LED-8036 Spec Sheet LED-8036 Installation Sheet Warranty Information Specifications Bulb Type HID Rerofit Bulb Material Polycarbon / Aluminum Lumens 9494 (5700K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 5700K Daylight Lumens Per Watt 94 (5700K) Base Type Mogul (E39) Replaces 250 Watts HID Lifetime 50,000 Hrs Wattage 100 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$319.85 See It
LED-8025E57 Medium Base 52 Watt LED Site / Wall Pack / Roadway Retrofit Replacement for HID 5700K

LED retrofit design to replace MH and HPS lamps up to 175 Watt. Fully encapsulated, 52 Watt LED with E26 Medium Base. Design features both down and side mounted LEDs delivering a wide, uniform light distribution. Suitable for fully enclosed garage, low bay and other area fixtures. Fully encapsulated, 100 - 277 VAC E26 mounting that integrates energy saving LED technology into a powerful yet energy saving LED Low Bay/Garage light..Features: 52 Watt Power consumption Replaces up to a 175 Watt HID 360 Degrees 120-277VAC Not Dimmable 80 CRI 50,000 hr rated lifetime Operating Temp -40 F to 122 F UL Classified Damp 5 Year Warranty Markets & ApplicationsLED Garage / Low Bay / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. Site / Low Bay / Garage Security lighting Outdoor Area Lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 5.91" x 7.87" Specification Sheets & Brochures LED-8025 Spec Sheet LED-8025 Installation Sheet Warranty Information Specifications Bulb Type HID Rerofit Bulb Material Polycarbon / Aluminum Lumens 4862 (5700K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 5700K Daylight Lumens Per Watt 93.5 (5700K) Base Type Medium (E26) Replaces 175 Watts HID Lifetime 50,000 Hrs Wattage 52 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$205.52 See It
4 Foot LED T8 Replacement Tube - 18 Watts - 360 Degree Output

World's First LED T8 Tube with 360 Degree Light Output.Introducing SUNSUN T8 LED Tube replacements. By combining award winning LED driver design with a unique glass housing, SUNSUN has for the first time, created an LED T8 retrofit tube with true 360 degree light output. SUNSUN T8 tube replacements make it easy to bring super efficient LED T8 technology to every fixture. For use with existing fixture - bypass ballast and re-wire to single-end power.Requires non-shunted lamp holders (tombstones). Not for use with dimmers. Key Features Uses Just 18 Watts 360 Degree Beam Angle with Proprietary Glass Housing, Mimics a Standard Fluorescent 3500K, 4000K, 5000K Color Temperatures Super Efficient Built-In Power Supply with No Compromise on Stability and Life Flicker-free and Instant On with No Need to Warm Up Suitable for Low Temperature ApplicationsDownloads and DocumentationInstallation Guide - All VerisionsEarthLED Total Product InsightPerformance SpecificationsReplacement for:T8/T12 4 Foot Fluorescent TubeBrightness (Lumens):1620 | 1710 | 1800Color Temperature:3500K | 4000K | 5000KColor Accuracy (CRI):80Dimensions1.4 x 49.5Power Consumption:18 WattsVoltage:120-277 VoltsDimmable:NoDimensions / Additional DataCertifications:ULProduct/Order Code:SI-JT84G13N18-35GLSI-JT8G13N18-40GLSI-JT8G13N18-50GLLifespan / Cost To RunProjected Life: @3 hrs/Day50,000 HrsYearly Energy Cost: 3 hrs/Day @ .11 kWh$2.15Warranty3 Year SUNSUN Limited Warranty EarthLED Product Protection Plan is Available

more >>
EarthLED
$449.75 See It
LED-8002M42 Mogul Base 45 Watt LED Site / Wall Pack / Roadway Retrofit Replacement for HID 4200K

LED retrofit design to replace MH and HPS lamps up to 175 Watt. Fully encapsulated, 45 Watt LED with E39 Mogul Base. Robust construction with rotatable base enables user to accuratly direct LED output to target. Suitable for fully enclsed Wall Packs, Roadway, Shoe Box and any other typical HID fixture. Fully encapsulated, 100 - 277 VAC (US) / 120-347 VAC (CA), E39 mounting that integrates energy saving LED technology into a powerful yet energy saving SMD LED 'street light' lamp.Features: 45 Watt Power consumption Replaces up to a 175 Watt HID 180 Degrees 120-277VAC Not Dimmable 80 CRI 50,000 hr rated lifetime Operating Temp -40 F to 122 F UL Classified Damp 5 Year Warranty Markets & ApplicationsLED Post top / Wall Pack / Area LED for HID retrofit lamps lower energy costs, bulb and ballast replacement costs and also can greatly reduce costly equipment rental when re-lamping HID lamps on and off cycle. LED for HID retrofits will also eliminate lamp disposal issues due to the mercury content in many HID lamps. These lamps can impact energy usage and costs in a major way for communities and housing developments with minimal to no maintenance costs thanks to the up to 50,000 hour lamp life. Site / Roadway / Wall Pack Wall packs (where applicable) Security lighting Cold Display Bollard Post Top Outdoor Area Lighting Parks and quads Municipal lighting Installation Notes: When installing LED-8000 series retrofit lamps within HID fixtures, ballast must be bypassed when present. LED-8000 series retrofits are UL damp rated, sealing the existing HID fixture after installation will deliver best results. Installing surge/lightning protectors is highly recommended and helps to eliminate premature driver failure caused by surges and other power fluctuations. See Technical Documents web page for more detailed information and instructions. Lamp Dimensions - 3.5" x 11.3" Specification Sheets & Brochures LED-8002 Spec Sheet LED-8002 Installation Sheet Warranty Information Specifications Bulb Type Cylindrical Bulb Material Polycarbon / Aluminum Lumens 2850 (4200K) Input Voltage 120-277VAC CRI 80 Beam Angle 360 degree Color 4200K Warm White Lumens Per Watt 63 (4200K) Base Type Mogul (E39) Replaces 175 Watts HID Lifetime 50,000 Hrs Wattage 45 Watt Dimmable no Warranty 5 Year Limited

more >>
Energy Saving Lighting
$219.22 See It
Search within results
  • Find by Price
    • $ to $