1 to 20 of about 8210 products for light reflectors

Result for "light reflectors"
Reflector for Panorama Pro LED Module

This polished reflector doubles the light given off by your Panorama Pro LED Module. Installs to one module.

more >>
That Fish Place - That Pet Place
$12.30 See It
170PS 6" Incandescent Line Voltage Airtight Wet Location Shower Light Reflector Cone with Albalite Lens Recessed Lighting Trim, White Ring with Frosted Lens

Halo Lighting 170PS 6" Incandescent Line Voltage Airtight Wet Location Shower Light Reflector Cone with Albalite Lens Recessed Lighting Trim, White Ring with Frosted Lens

more >>
Electricsuppliesonline
$28.50 See It
400 Watt HPS Grow Light Electronic Ballast Reflector Hood Kit

400W High Pressure Sodium Bulb: Power: 400 watts (High efficiency) Expected Life Span: 24,000 hours Lumen: 50,000 lumens Color Temperature: 2,100K Contains more red spectrum, which is best for flowering. Non-luring insects Strong power to penetrate fog High output, high luminescence efficiency. Fit for all standard 400 watts HPS grow light systems Fit for the Heliophile, such as Rose and Camellia, which grows better at longer sunshine time. 400W Digital Electronic Ballast: High power 400 watts Built-in heat output holes. Built-in standard reflector interface Fit for 400 watts High Pressure Sodium Lamps or 400 watts Metal Halide Lamps Pass FCC and CE Certificate Low Noise Energy saving and environmental friendly Stabilize input power and output luminous flux Reduce wastage and improve usable efficiency of power supply equipment capability Shielded component to protect against Radio Frequency Interference to other equipment Prevent the electricity from striking the bulb repeatedly and make the bulb nigrescence prematurely Protect your eyes when continually working Rated Power: 400 watts Specified Frequency: 50/60Hz Working Voltage Range: 120V/240V Install Space Requirement: 12in. x 6-1/4in. x 4in. (31cm x 16cm x 16cm) With a 8-1/3ft. power cord to wall (US standard plug) Extra Large Hard Light Aluminum Reflector Hood: Made with high-quality aluminum. Excellent for assembling light. Special Hard Light Reflector with many reflective surfaces around to form a reflective hood can intensify light effectively. Reflect large-area and offer sufficient light for plants, especially effective for the growth of heliophilous plants. This large reflector fits for not only 400 watts grow light system, but also 1,000 watts grow light system. You could up-grade your light system up to 1,000 watts just by replacing the bulb and the matchable ballast. Reflector Dimension: 20-1/2in.(L) x 19-3/4in.(W) x 5-1/2in.(H) Ceramic Socket: Fit for E39 bulb cap Detachable durable ceramic socket Easy to install if you need to change your reflector Ceramic socket should be used with ballast for steady power supply. With a 14-3/8ft. power cord Timer: Safe and easy to use Ensure timer is disconnected from power supply. Press down the segment pushbuttons according to how long you require the system to stay on. Each segment is 15 minutes. Turn the timer dial until the black pointer is set to the present time. Plug in your grow light system to the timer and then the timer to the power supply socket and switch the socket on. Timer and your light system go working till the stop time. The timer can be overridden by moving the red switch on the side. Timer Power: Max Wattage 1725W; Max Current 15A/120V/60Hz Package Includes: 1x 400W High Pressure Sodium Bulb 1x 400W Digital Electronic Ballast 1x Extra Large Hard Light Reflector Hood 1x Ceramic Socket 1x Free Timer 1Set Hi-Low Yoyo Reflector Hanging Kit Parameter Reference Range for Growing: Stage Light Lighting Time Dark Time Hanging Heigh

more >>
Trend Times Toy Store
$308.42 See It
Reflector Unit Radiant Ceiling Mount Space Heater RDUN -7%

Features: -Radiant reflector unit.-Delivers brightest possible light.-Heavy duty pregalvanized steel.-Multi faceted computer designed aluminum interior.-Includes hangers and mounting hardware.-Product Type: Radiant.-Distressed: No.-Installation Ty...

more >>
Wayfair Supply
$128.84 $119.30 See It
600 Watt HPS Grow Light Electronic Ballast Reflector Hood Kit

600W High Pressure Sodium Bulb: Power: 600 watts (High efficiency) Expected Life Span: 24,000 hours Lumen: 90,000 lumens Color Temperature: 2,100K Contains more red spectrum, which is best for flowering. Non-luring insects Strong power to penetrate fog High output, high luminescence efficiency. Fit for all standard 600 watts HPS grow light systems Fit for the Heliophile, such as Rose and Camellia, which grows better at longer sunshine time. 600W Digital Electronic Ballast: High power 600 watts Built-in heat output holes. Built-in standard reflector interface Fit for 600 watts High Pressure Sodium Lamps or 600 watts Metal Halide Lamps Pass FCC and CE Certificate Low Noise Energy saving and environmental friendly Stabilize input power and output luminous flux Reduce wastage and improve usable efficiency of power supply equipment capability Shielded component to protect against Radio Frequency Interference to other equipment Prevent the electricity from striking the bulb repeatedly and make the bulb nigrescence prematurely Protect your eyes when continually working Rated Power: 600 watts Specified Frequency: 50/60Hz Working Voltage Range: 120V/240V Install Space Requirement: 12in. x 6-1/4in. x 4in. (31cm x 16cm x 16cm) With a 8-1/3ft. power cord to wall (US standard plug) Extra Large Hard Light Aluminum Reflector Hood: Made with high-quality aluminum. Excellent for assembling light. Special Hard Light Reflector with many reflective surfaces around to form a reflective hood can intensify light effectively. Reflect large-area and offer sufficient light for plants, especially effective for the growth of heliophilous plants. This large reflector fits for not only 600 watts grow light system, but also 1,000 watts and 400 watts grow light systems. You could up-grade your light system up to 1,000 watts just by replacing the bulb and the matchable ballast. Reflector Dimension: 20-1/2in.(L) x 19-3/4in.(W) x 5-1/2in.(H) Ceramic Socket: Fit for E39 bulb cap Detachable durable ceramic socket Easy to install if you need to change your reflector Ceramic socket should be used with ballast for steady power supply. With a 14-3/8ft. power cord Timer: Safe and easy to use Ensure timer is disconnected from power supply. Press down the segment pushbuttons according to how long you require the system to stay on. Each segment is 15 minutes. Turn the timer dial until the black pointer is set to the present time. Plug in your grow light system to the timer and then the timer to the power supply socket and switch the socket on. Timer and your light system go working till the stop time. The timer can be overridden by moving the red switch on the side. Timer Power: Max Wattage 1725W; Max Current 15A/120V/60Hz Package Includes: 1x 600W High Pressure Sodium Bulb 1x 600W Digital Electronic Ballast 1x Extra Large Hard Light Reflector Hood 1x Ceramic Socket 1x Free Timer 1Set Hi-Low Yoyo Reflector Hanging Kit Parameter Reference Range for Growing: Stage Light Lighting Time Dark Tim

more >>
Trend Times Toy Store
$348.64 See It
S2851 75W 120V R25 Plant Light Reflector Incandescent light bulb

Satco S2851 75W 120V R25 Plant Light Reflector E26 Medium Base Incandescent light bulb, Wattage: 75W, Volt: 120V, Shape: R25, Base: E26 Medium Screw, Rated Life: 2000Hrs.

more >>
BulbAmerica.com
$4.58 See It
600 Watt HPS Grow Light Air Cooled Reflector Switchable Ballast

600W High Pressure Sodium Bulb: Power: 600 watts (High efficiency) Expected Life Span: 24,000 hours Lumen: 90,000 lumens Color Temperature: 2,100K Contains more red spectrum, which is best for flowering. Non-luring insects Strong power to penetrate fog High output, high luminescence efficiency. Fit for all standard 600 watts HPS grow light systems Fit for the Heliophile, such as Rose and Camellia, which grows better at longer sunshine time. 600W Powerful Ballast: High power 600 watts Built-in two louver s Built-in standard reflector interface Fit for 600 watts High Pressure Sodium Lamps Pass CE Certificate Low Noise Energy saving and environmental friendly Stabilize input power and output luminous flux Recycle material and improve usable efficiency of power supply equipment capability Prevent the electricity from striking the bulb repeatedly and make the bulb nigrescence prematurely Protect your eyes when continually working Rated Power: 600 watts Specified Frequency: 50/60Hz Working Voltage Range: Switchable 120V/240V Install Space Requirement: 13in. x 8in. x 8-1/4in. (33cm x 21cm x 21cm) With a 8-1/3ft. power cord to wall (US standard plug) 6" Large Air Cooled Reflector Hood: Air cooling Assemble Lighting Multi-surface large hood to reflect most light to your plants Standard 6" air vent fits to 6" exhaust fan system(NOT included) and fits to any grow tents Removable tempered glass locked by switch for temperature control Tempered glass assemble with exhaust fan(NOT included) can deflate heat for plants not need much heat Tempered glass removed without exhaust system can offer more heat for tropical plants This Large air cooled reflector fits for not only 600 watts grow light system, but also 1,000 watts grow light system You could up-grade your light system up to 1,000 watts just by replacing the bulb and the matchable ballast Dimensions: 26in.(L) x 22-1/4in.(W) x 10in.(H) Ceramic Socket: Fit for E39 bulb cap Detachable durable ceramic socket Easy to install if you need to change your reflector Ceramic socket should be used with ballast for steady power supply. With a 14-3/8ft. power cord Timer: (Free Gift) Safe and easy to use Ensure timer is disconnected from power supply. Press down the segment pushbuttons according to how long you require the system to stay on. Each segment is 15 minutes. Turn the timer dial until the black pointer is set to the present time. Plug in your grow light system to the timer and then the timer to the power supply socket and switch the socket on. Timer and your light system go working till the stop time. The timer can be overridden by moving the red switch on the side. Timer Power: Max Wattage 1725W; Max Current 15A/120V/60Hz Package Includes: 1x 600W High Pressure Sodium Bulb 1x 600W Ballast 1x 6" Air Cooled Reflector Hood 1x Ceramic Socket 1x Free Timer 1Set Hi-Low Yoyo Reflector Hanging Kit Parameter Reference Range for Growing: Stage Light Lighting Time Dark Time Hanging Height Best Temperature First 2-4wks (R

more >>
Trend Times Toy Store
$443.44 See It
Light Reflector - WR02X10670

Pricing subject to change. Light Reflector

Sears Parts Direct
$3.99 See It
Large Grow Light Reflector - MH or HPS - 6 in. Dia. Flanges for Exhaust Duct - Operates up to 1000 Watt Lamp - Ballast and Lamp Sold Separately - UltraGROW UG/R/SLH/6

Brand UltraGROW - Part No. UG-R/SLH/6 - Reflector Finish Specular Hammered Aluminum - Cord Length 15 ft. - Length 35 in. - Width 26.87 in. - Height 8.5 in. - Finish Powder Coated - Housing Aluminum - Opening 6 in. - Weight 31 lbs. - Warranty 5 Years -

more >>
1000Bulbs.com
$154.28 See It
G-5770 Note Reflector

By Holtkotter.The G-5770 Note Reflector is part of the Lichtstar system, offering flexibility in creating a light that is right for you. Choose the components in a way to suit your specific lighting needs. First, chose a canopy, offered in single or multipoint options. A single canopy will allow a single reflector or glass to be suspended, while a multipoint canopy allows the use of multiple reflectors or glass options to suspend together. Lastly, chose a reflector or glass option.

more >>
YLighting
$250.00 See It
171PS 6" Incandescent Line Voltage Airtight Wet Location Shower Light Reflector Cone with Drop Opal Lens Recessed Lighting Trim, White Ring with Drop Opal Lens

Halo Lighting 171PS 6" Incandescent Line Voltage Airtight Wet Location Shower Light Reflector Cone with Drop Opal Lens Recessed Lighting Trim, White Ring with Drop Opal Lens

more >>
Electricsuppliesonline
$27.00 See It
T5-HO Polished Reflector Retrofit Kit - 48"

Reflector Kits use German-made aluminum reflectors that maximize light output. They include clips that allow reflectors to pivot around lamps and direct light where it is needed. The parabolic design focuses light outward.

more >>
Big Al's Pets
$35.99 See It
AstroView 6 Equatorial Reflector Telescope

If you're ready to graduate from a small scope or want your first scope to have more light-gathering power than typical starter scopes, step up to the AstroView 6. Its 150mm parabolic mirror has a focal length of 750mm (f/5), so it offers generous wi

more >>
Orion Telescopes & Binoculars
$479.99 See It
1/2 in. - Gold - Rope Light Reflector Trim - Length 6 ft. - FlexTec 206REFG

Brand FlexTec - Part No. 206REFG - Color Gold - Length 6 ft. - Width 2 in. - Depth 1 in. - Diameter 0.5 in. - Reflector Type Anodized -

more >>
1000Bulbs.com
$19.81 See It
Hydroponics MH HPS Grow Light 6" Air Cool Reflector Hood

This latest and popular 6" Air Cooled Reflector Hood fits for Metal Halide(MH) and High Pressure Sodium(HPS) Plant Grow Light System. It's multiple reflective surfaces can intensify light and enlarge lighting area, perfect for your plants to promote better growth. It's a excellent reflector to update your grow light system. Come with tempered glass lens and ceramic socket for use. Safe and environmental friendly. 6" Large Air Cooled Reflector Hood: Assemble Lighting. Best air cooling with 6" air vent. Durable Steel Construction with Aluminum Reflective lining and white stoving varnish surface. Multi-surface large hood to reflect most light to your plants. Tempered Glass Lens to reduce heat and keep your plants from burning. Open or lock the glass lens with Clamps, for installing or fetching out bulb easily. Rubber Gasket under the lens is good for air tight and can avoid shock of the glass lens. Standard 6" air vent fits to 8" exhaust fan system(NOT included) and fits to any grow tents. Tempered glass assemble with exhaust fan(NOT included) can deflate heat for plants not need much heat. Fit for 400 watts, 600 watts and 1,000 watts grow light system, using with the matchable bulb and ballast. Come with two Steel Hooks for hanging. Dimensions: 22-1/2in.(L) x 15in.(W) x 8in.(H) Universal Ceramic Socket: Fit for E39 bulb cap. Pre-install durable ceramic socket. Ceramic socket should be used with ballast for steady power supply. With a 14-1/2ft power cord (with US standard plug). Package Includes: 1x 6" Air Cooled Reflector Hood 1x Ceramic Socket 2x Steel Hooks for Hanging Please kindly note that the bulb shown in picture is demonstration only, Not included. Thank you!

more >>
Trend Times Toy Store
$111.26 See It
Promaster Systempro Reflectadisc 5 in 1 Reflector

Reflector - Diameter: 22"

more >>
Lighting New York
$480.00 See It
Chromaglo Bright White Square Reflector LED Semi Flush Mount

Design by Robert Sonneman, 2014.The Chromaglo Bright White Square Reflector LED Semi Flush Mount directs light downward from one LED source and upward from another LED source. The uplight is reflected by a square white etched glass panel, emitting a soft glow. The effect is a balanced radiance of comfortable, ambient illumination and direct lighting. Dimmable with an electronic low voltage dimmer.

more >>
YLighting
$900.00 See It
Reflector Kit 24 Watts, 2 pack

Clips allow reflectors to pivot around lamps and direct light where it's needed.

Petco
$17.99 See It
6" Reflector Trim for R30 Lamps THS30

Thomas Lighting THS30 This collection of recessed lighting has been created to meet your everyday needs. Reflector trims maximize light output and are ideal for general accent. FEATURES -Application for either IC or non IC rated recessed housings. -Adjustable socket plate in the PS1, PS7IC, and PS3 must be removed prior to installation of this trim, or use with NSP version. -Requires one 50 - 100 watt R30 or Par 30 bulb. -Note: Recessed housing NOT INCLUDED. -Inside Diameter: 6". -Outside Diameter: 7 3/8"W (187mm). COMPATIBLE HOUSINGS PS1 - Pro Series 6" IC/Non IC Housing for New Construction Features: -For new construction. -Thermally protected. -Air seal. -IC or non-IC rated. -for use with Thomas 6" trims for non-IC applications up to 150 watts, and IC applications up to 90 watts. -Maximum wattage: 150W. -Overall dimensions: 7.5" H x 11.5" W x 6.5" D. PS3NSP - Pro Series 6" IC/Non IC Housing for New Construction Without Socket Plate Features: -For new construction. -Thermally protected. -Labor saving. -Air seal. -IC or non-IC rated. -Provided without a socket plate. -For use in installations where TRB style fully enclosed eyeball or IC shower trims are used. -Maximum wattage: 150W. -Overall dimensions: 7.5" H x 14.25" W x 8.5" D. PS1NSPQC - Pro Series 6" IC/Non IC Housing for New Construction with Quick Connect Wire Terminals Features: -For new construction. -Thermally protected. -Air seal. -IC or non-IC rated. -Provides convenience of Quick-Connect wire terminals for fast, easy plug-together supply wire connections. -Maximum wattage: 150W. -Overall dimensions: 7.5" H x 11.5" W x 6.5" D. PS1RM - Pro Series 6" IC/Non IC for New Construction Features: -For remodel construction. -Thermally protected. -Air seal. -IC or non-IC rated. -Maximum wattage: 150W. -Overall dimensions: 7.5" H x 6.375" D. PS3 - Pro Series 6" IC/Non IC Housing for New Construction Features: -For new construction. -Thermally protected. -Labor saving. -Air seal. -IC or non-IC rated. -Maximum wattage: 150W. -Overall dimensions: 7.5" H x 14.25" W x 8.5" D. PS1NSP - Pro Series 6" IC /Non IC Housing for New Construction without Socket Plate Features: -For new construction. -Thermally protected. -Air seal. -IC or non-IC rated. -Provided without socket plate. -For use in installations where TRB style fully enclosed, eyeball or IC shower trims are used exclusively. -For use with Thomas 6" trims for non-IC applications up to 150 watts, and IC applications up to 90 watts. -Maximum wattage: 150W. -Overall dimensions: 7.5" H x 11.5" W x 6.5" D. PS7IC - Pro Series 6" IC Housing for New Construction Features: -For new construction. -Thermally protected. -IC rated recessed housing. -Socket plate included. -Maximum wattage: 90W. -Overall dimensions: 7.5" H x 11.5" W x 6.5" D. TR150IC - Pro Series 6" IC Housing without Socket Plate Features: -Thermally protected. -IC rated. -High wattage recessed houding. -Pre-installed BH6 SURE-LOK adjustable bar hangers. -Junction box is provided with five 1

more >>
Wayfair
$120.40 See It
Sun & Stars REF-STRIP1X32/8-2X32 Premium Strip Light Reflector (STRIP-4/1X32)(STRIP-8/2X32) White Reflector (1 Reflector for A 4FT Fixture)

Most of the high bays are for factory or industrial usage, but this decorative high bay can provide the save illumination with a better styling. The Decorative high bay is prefect solution for renovation office, retail or school. It has a smaller, compact housing and louvered baffle for space saving and is more attractive looking. Lamps are protected by the Louvered baffle, and the baffle can be easily removed.

more >>
ShineRetrofits.com
$5.18 See It
Search within results