1 to 20 of  278 products for lochinvar highrecovery water heater

No exact matches found for lochinvar highrecovery water heater

278 similar items found

Shield Water Heater SNR200-100

Lochinvar SNR200-100 Features: -Water heater. -Shield collection. -Natural gas. -96% thermal efficiency. -Modulating burner with 5:1 turndown. -Operates at temperatures up to 180°F for sanitizing applications. -Stainless steel heat exchanger. -Glass-lined steel tank. -Zero clearances to combustible material. -PVC, CPVC, polypropylene and stainless steel venting up to 100 equivalent feet. -Direct-vent sealed combustion. -Standard commercial. Specifications: -Capacity: 93 Gallon. -199,999 BTU input. -233 GPH at 100deg rise. -150 PSI working pressure. -Overall dimensions: 80" H x 28" W x 28" D.

more >>
Wayfair
$11,981.12 See It
Booster Water Heater, Electric, 3.2 Gallon Storage Capacity,

Booster Water Heater, Electric, 3.2 Gallon Storage Capacity, Stainless Steel Tank & Front, Fast Recovery, Powder Coated Silver Gray Hammertone Body, Black Base, 6" Legs, 11.4kw

more >>
Restaurant Equipment Solutions
$1,280.40 See It
240 / 3 Phase Hatco C-12 Compact Booster Water Heater 12 kW

The space saving Hatco C12 12 kW compact booster water heater has a 6 gallon capacity to provide plenty of hot final rinse water required to properly sanitize and flash-dry dishes and flatware. The Hatco C12 electric booster heater is factory pre-plumbed and pre-wired with a calibrated immersion thermostat and high-temperature limit switch. Fiberglass insulation minimizes heat loss, while the stainless steel front panel and powder coated body provide long-lasting durability. Swing-away front panels with low-water cut-off, control fuses, and transformer allow quick access to probes and elements for easier servicing. The Hatco C12 compact booster heater is UL and NSF Listed. Choose voltage. Please consult the Specification Sheet for additional details and important installation requirements. A sizing chart is included at the end of the Spec Sheet to help you match the correct booster heater to your needs. Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty. Dimensions & Specs: Overall: 13"W x 20 3/4"D x 19 3/4"H (includes legs) Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 120 GPH Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 69 GPH Please Note: All voltages of this model are available for Quick Ship C-12-240-3-QS From Hatco

more >>
The WEBstaurant Store
$1,431.10 See It
Shield Water Heater SNA500-125

Lochinvar SNA500-125 Features: -Water heater. -Shield collection. -Natural gas. -96% thermal efficiency. -Modulating burner with 5:1 turndown. -Operates at temperatures up to 180°F for sanitizing applications. -Stainless steel heat exchanger. -Glass-lined steel tank. -Zero clearances to combustible material. -PVC, CPVC, polypropylene and stainless steel venting up to 100 equivalent feet. -Direct-vent sealed combustion. -Standard commercial. Specifications: -Capacity: 125 Gallon. -500,000 BTU input. -582 GPH at 100deg rise. -150 PSI working pressure. -Overall dimensions: 80" H x 34" W x 34" D.

more >>
Wayfair
$21,355.53 See It
Booster Water Heater, Electric, 3.2 Gallon Storage Capacity,

Booster Water Heater, Electric, 3.2 Gallon Storage Capacity, Stainless Steel Tank & Front, Fast Recovery, Powder Coated Silver Gray Hammertone Body, Black Base, 6" Legs, 15kw

more >>
Restaurant Equipment Solutions
$1,388.75 See It
Shield Water Heater SNA400-125

Lochinvar SNA400-125 Features: -Water heater. -Shield collection. -Natural gas. -96% thermal efficiency. -Modulating burner with 5:1 turndown. -Operates at temperatures up to 180°F for sanitizing applications. -Stainless steel heat exchanger. -Glass-lined steel tank. -Zero clearances to combustible material. -PVC, CPVC, polypropylene and stainless steel venting up to 100 equivalent feet. -Direct-vent sealed combustion. -Standard commercial. Specifications: -Capacity: 125 Gallon. -399,999 BTU input. -465 GPH at 100deg rise. -150 PSI working pressure. -Overall dimensions: 80" H x 34" W x 34" D.

more >>
Wayfair
$21,819.71 See It
208/3V Hatco C-13 Compact Booster Water Heater 13.5 kW

This space saving Hatco C-13 13.5 kW compact booster water heater has a 6 gallon capacity to provide plenty of hot final rinse water required to properly sanitize and flash-dry dishes and flatware! This electric booster heater is factory pre-plumbed and pre-wired for convenient installation, and comes with a calibrated immersion thermostat and high-temperature limit switch. Its fiberglass insulation minimizes heat loss, and a stainless steel front panel and powder coated body provide long-lasting durability. Please consult the Specification Sheet for additional details and installation requirements. A sizing chart is included at the end of the Spec Sheet to help you match the correct booster heater to your needs. Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty. - Swing-away front panels with low-water cut-off, control fuses, and transformer allow quick access to probes and elements for easy servicing - Gauges for temperature / pressure - Metal sheathed heating elements - 6" legs - UL, NSF, and CSA Listed; Choose voltage, must be hard-wired, a cord and plug are not included Dimensions & Specs: Left to Right: 13 1/8" Front to Back: 26" Height (including legs): 19 3/4" (includes legs) Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 135 GPH Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 77 GPH Please Note: This model is not available for Quick Ship C-13 208/3 From Hatco

more >>
The WEBstaurant Store
$1,442.10 See It
Skin Ergetic Overnight High-Recovery Moisturizer 50ml/1.69oz by Biotherm

Free Shipping worldwide. Recommended Retail: US$61.50 - Skin Ergetic Overnight High-Recovery Moisturizer-50ml/1.69oz - skincare / cosmetics

more >>
StrawberryNET.com
$60.00 See It
208/1V Hatco C-13 Compact Booster Water Heater 13.5 kW

This space saving Hatco C-13 13.5 kW compact booster water heater has a 6 gallon capacity to provide plenty of hot final rinse water required to properly sanitize and flash-dry dishes and flatware! This electric booster heater is factory pre-plumbed and pre-wired for convenient installation, and comes with a calibrated immersion thermostat and high-temperature limit switch. Its fiberglass insulation minimizes heat loss, and a stainless steel front panel and powder coated body provide long-lasting durability. Please consult the Specification Sheet for additional details and installation requirements. A sizing chart is included at the end of the Spec Sheet to help you match the correct booster heater to your needs. Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty. - Swing-away front panels with low-water cut-off, control fuses, and transformer allow quick access to probes and elements for easy servicing - Gauges for temperature / pressure - Metal sheathed heating elements - 6" legs - UL, NSF, and CSA Listed; Choose voltage, must be hard-wired, a cord and plug are not included Dimensions & Specs: Left to Right: 13 1/8" Front to Back: 26" Height (including legs): 19 3/4" (includes legs) Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 135 GPH Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 77 GPH Please Note: This model is not available for Quick Ship C-13 208/1 From Hatco

more >>
The WEBstaurant Store
$1,442.10 See It
High Power Water Heater HSP06-050

Lochinvar HSP06-050 Features: -Water heater. -High Power collection. -Controls surface mounted thermostats on each heating element. -Durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clean, clear hot water. -Tank saver anode. A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. -Heating elements are plated, incoloy immersion type elements provide long life and resistance to lime scale build up. -Standard voltages - 208, 240 and 480 are wired from the factory for three phase. The three phase wiring can be field converted to single phase. -Energy cut-off shuts off electrical power to the elements should the water temperature in the tank exceeds 200°F. -Over current protection fuses. All elements and controls are fused in accordance with U.L. requirements when current exceeds 48 amps. -ASME temperature and pressure relief valve factory provided. -Non-CFC foam insulation. A superior material formulation provides uniform tank coverage with a thick blanket of insulating foam. -Standard commercial. Specifications: -Capacity: 50 Gallon. -Voltage: 240 Volt. -Wattage: 6 KW. -Overall dimensions: 55.75" H x 21.75" W x 21.75" D.

more >>
Wayfair
$4,163.06 See It
WHAVQ4 Timer, Auto Voltage 24Hour DPDT Water Heater Timer Mechanical Switch Grey

Intermatic Water Heater Timer Mechanical Switch Auto Voltage 24-Hour DPDT - Grey The Intermatic Water Heater Timer Mechanical Switch Auto Voltage 24-Hour DPDT - Grey controls electric water heaters. This Intermatic timer can be programmed daily be set with trippers from 1 to 23 hours and...

more >>
Westside Wholesale
$107.99 See It
208/3 Hatco S-54 Imperial Booster Water Heater 54 kW - 16 Gallon

The space saving Hatco S-54 54 kW Imperial booster water heater has a 16 gallon capacity to provide plenty of hot final rinse water required to properly sanitize and flash-dry dishes and flatware. The Hatco S-54 Imperial electric booster heater is factory pre-plumbed and pre-wired with a calibrated immersion thermostat and high-temperature limit switch. Fiberglass insulation minimizes heat loss, while the stainless steel front panel and powder coated body provide long-lasting durability. Swing-away front panels with low-water cut-off, control fuses, and transformer allow quick access to probes and elements for easier servicing. The Hatco S-54 Imperial booster heater is UL and NSF Listed. Choose voltage. Please consult the Specification Sheet for additional details and important installation requirements. A sizing chart is included at the end of the Spec Sheet to help you match the correct booster heater to your needs. Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty. Dimensions & Specs: Overall: 23 1/2"W x 23"D x 31 3/8"H (includes legs) Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 542 GPH Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 310 GPH Please Note: All voltages of this model are available for Quick Ship S-54-208-3-QS From Hatco

more >>
The WEBstaurant Store
$2,729.65 See It
240V Single Phase Hatco S-15 Imperial Booster Water Heater 15 kW - 16 Gallon

The space saving Hatco S-15 15 kW Imperial booster water heater has a 16 gallon capacity to provide plenty of hot final rinse water required to properly sanitize and flash-dry dishes and flatware! This electric booster heater is factory pre-plumbed and pre-wired with a calibrated immersion thermostat and high-temperature limit switch, and features fiberglass insulation to minimize heat loss. Please consult the Specification Sheet for additional details and installation requirements. A sizing chart is included at the end of the Spec Sheet to help you match the correct booster heater to your needs. - Swing-away front panels with low-water cut-off, control fuses, and transformer allow quick access to probes and elements for easy servicing - Gauges for temperature / pressure - Stainless steel front panel and powder coated body provide long-lasting durability - Metal sheathed heating elements - 6" legs - UL, NSF, and CSA Listed; Choose voltage, must be hard wired, a cord and plug are not included Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty. Dimensions & Specs: Left to Right: 23 1/2" Back to Front: 23" Height: 31 3/8" (includes legs) Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 151 GPH Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 86 GPH Please Note: Quick ship available for 208V/3 Phase model only S-15 240/1 From Hatco

more >>
The WEBstaurant Store
$2,022.90 See It
240V Single Phase Hatco S-30 Imperial Booster Water Heater 30 kW - 16 Gallon

The space saving Hatco S-30 30 kW Imperial booster water heater has a 16 gallon capacity to provide plenty of hot final rinse water required to properly sanitize and flash-dry dishes and flatware! This electric booster heater is factory pre-plumbed and pre-wired with a calibrated immersion thermostat and high-temperature limit switch, and features fiberglass insulation to minimize heat loss. Please consult the Specification Sheet for additional details and installation requirements. A sizing chart is included at the end of the Spec Sheet to help you match the correct booster heater to your needs. - Swing-away front panels with low-water cut-off, control fuses, and transformer allow quick access to probes and elements for easy servicing - Gauges for temperature / pressure - Stainless steel front panel and powder coated body provide long-lasting durability - Metal sheathed heating elements - 6" legs - UL, NSF, and CSA Listed; Choose voltage, must be hard wired, a cord and plug are not included Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty. Dimensions & Specs: Left to Right: 23 1/2" Back to Front: 23" Height: 31 3/8" (includes legs) Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 301 GPH Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 172 GPH Please Note: This model is not available for Quick Ship S-30 240/1 From Hatco

more >>
The WEBstaurant Store
$2,390.30 See It
High Power Water Heater HSP12-050

Lochinvar HSP12-050 Features: -Water heater. -High Power collection. -Controls surface mounted thermostats on each heating element. -Durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clean, clear hot water. -Tank saver anode. A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. -Heating elements are plated, incoloy immersion type elements provide long life and resistance to lime scale build up. -Standard voltages - 208, 240 and 480 are wired from the factory for three phase. The three phase wiring can be field converted to single phase. -Energy cut-off shuts off electrical power to the elements should the water temperature in the tank exceeds 200°F. -Over current protection fuses. All elements and controls are fused in accordance with U.L. requirements when current exceeds 48 amps. -ASME temperature and pressure relief valve factory provided. -Non-CFC foam insulation. A superior material formulation provides uniform tank coverage with a thick blanket of insulating foam. -Standard commercial. Specifications: -Capacity: 50 Gallon. -Voltage: 240 Volt. -Wattage: 12 KW. -Overall dimensions: 55.75" H x 21.75" W x 21.75" D.

more >>
Wayfair
$4,432.25 See It
High Power Water Heater HSP13-050

Lochinvar HSP13-050 Features: -Water heater. -High Power collection. -Controls surface mounted thermostats on each heating element. -Durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clean, clear hot water. -Tank saver anode. A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. -Heating elements are plated, incoloy immersion type elements provide long life and resistance to lime scale build up. -Standard voltages - 208, 240 and 480 are wired from the factory for three phase. The three phase wiring can be field converted to single phase. -Energy cut-off shuts off electrical power to the elements should the water temperature in the tank exceeds 200°F. -Over current protection fuses. All elements and controls are fused in accordance with U.L. requirements when current exceeds 48 amps. -ASME temperature and pressure relief valve factory provided. -Non-CFC foam insulation. A superior material formulation provides uniform tank coverage with a thick blanket of insulating foam. -Standard commercial. Specifications: -Capacity: 50 Gallon. -Voltage: 240 Volt. -Wattage: 13 KW. -Overall dimensions: 55.75" H x 21.75" W x 21.75" D.

more >>
Wayfair
$4,508.29 See It
High Power Water Heater HSP06-080

Lochinvar HSP06-080 Features: -Water heater. -High Power collection. -Controls surface mounted thermostats on each heating element. -Durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clean, clear hot water. -Tank saver anode. A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. -Heating elements are plated, incoloy immersion type elements provide long life and resistance to lime scale build up. -Standard voltages - 208, 240 and 480 are wired from the factory for three phase. The three phase wiring can be field converted to single phase. -Energy cut-off shuts off electrical power to the elements should the water temperature in the tank exceeds 200°F. -Over current protection fuses. All elements and controls are fused in accordance with U.L. requirements when current exceeds 48 amps. -ASME temperature and pressure relief valve factory provided. -Non-CFC foam insulation. A superior material formulation provides uniform tank coverage with a thick blanket of insulating foam. -Standard commercial. Specifications: -Capacity: 80 Gallon. -Voltage: 240 Volt. -Wattage: 6 KW. -Overall dimensions: 60.25" H x 25.5" W x 25.5" D.

more >>
Wayfair
$5,354.32 See It
High Power Water Heater HSP09-080

Lochinvar HSP09-080 Features: -Water heater. -High Power collection. -Controls surface mounted thermostats on each heating element. -Durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clean, clear hot water. -Tank saver anode. A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. -Heating elements are plated, incoloy immersion type elements provide long life and resistance to lime scale build up. -Standard voltages - 208, 240 and 480 are wired from the factory for three phase. The three phase wiring can be field converted to single phase. -Energy cut-off shuts off electrical power to the elements should the water temperature in the tank exceeds 200°F. -Over current protection fuses. All elements and controls are fused in accordance with U.L. requirements when current exceeds 48 amps. -ASME temperature and pressure relief valve factory provided. -Non-CFC foam insulation. A superior material formulation provides uniform tank coverage with a thick blanket of insulating foam. -Standard commercial. Specifications: -Capacity: 80 Gallon. -Voltage: 240 Volt. -Wattage: 9 KW. -Overall dimensions: 60.25" H x 25.5" W x 25.5" D.

more >>
Wayfair
$5,460.91 See It
High Power Water Heater HSP12-080

Lochinvar HSP12-080 Features: -Water heater. -High Power collection. -Controls surface mounted thermostats on each heating element. -Durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clean, clear hot water. -Tank saver anode. A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. -Heating elements are plated, incoloy immersion type elements provide long life and resistance to lime scale build up. -Standard voltages - 208, 240 and 480 are wired from the factory for three phase. The three phase wiring can be field converted to single phase. -Energy cut-off shuts off electrical power to the elements should the water temperature in the tank exceeds 200°F. -Over current protection fuses. All elements and controls are fused in accordance with U.L. requirements when current exceeds 48 amps. -ASME temperature and pressure relief valve factory provided. -Non-CFC foam insulation. A superior material formulation provides uniform tank coverage with a thick blanket of insulating foam. -Standard commercial. Specifications: -Capacity: 80 Gallon. -Voltage: 240 Volt. -Wattage: 12 KW. -Overall dimensions: 60.25" H x 25.5" W x 25.5" D.

more >>
Wayfair
$5,478.03 See It
High Power Water Heater HSP15-080

Lochinvar HSP15-080 Features: -Water heater. -High Power collection. -Controls surface mounted thermostats on each heating element. -Durable glass lining is fused to the steel tank at 1600°F to assure lasting protection against rust and corrosion while providing clean, clear hot water. -Tank saver anode. A large diameter, high capacity anode inhibits corrosion of the tank interior for long, trouble-free service. -Heating elements are plated, incoloy immersion type elements provide long life and resistance to lime scale build up. -Standard voltages - 208, 240 and 480 are wired from the factory for three phase. The three phase wiring can be field converted to single phase. -Energy cut-off shuts off electrical power to the elements should the water temperature in the tank exceeds 200°F. -Over current protection fuses. All elements and controls are fused in accordance with U.L. requirements when current exceeds 48 amps. -ASME temperature and pressure relief valve factory provided. -Non-CFC foam insulation. A superior material formulation provides uniform tank coverage with a thick blanket of insulating foam. -Standard commercial. Specifications: -Capacity: 80 Gallon. -Voltage: 240 Volt. -Wattage: 15 KW. -Overall dimensions: 60.25" H x 25.5" W x 25.5" D.

more >>
Wayfair
$5,612.98 See It
Search within results