1 to 20 of about 1451 products for lowes power tools

Result for "lowes power tools"
RIDGID RP 340-B Press Tool Kit with ProPress Jaws (1/2" - 1") 43353

RIDGID RP 340-B Press Tool Kit with ProPress Jaws (1/2" - 1") 30% smaller tool increases maneuverability.* 17% lighter tool reduces operator fatigue.* 31% longer service interval (up to 42,000 cycles) maximizes uptime.* More than 400 presses per charge (with Advanced Lithium 4 Battery). Ultimate flexibility with the ability to switch between battery and AC power on the same tool. * Versus RP 330-B Specifications: Capacity: 1/2" - 4 (Copper and Stainless Steel), 1/2" -2" (PEX) 270à ° Barrel/Jaw Swivel Hydraulic Ram Output: 7,200 lbs. (32kN) Weight: 8.5 lbs. (w/Battery), 9.5 lbs. (w/AC Power Adapter) Operating Temperature Range: 15à °F to 122à °F Approximate Cycle Time: 4 seconds LED-light For Continued Operations In No or Low-light Environments Longest service interval in the industry: 42,000 Cycles Compatible With All Standard Series Pressing Jaws and Attachments From RIDGID For Use With Copper and Stainless Steel Tubing, Steel Pipe, PEX and Cutting Soil Pipe. Battery Tool Kit Includes: RP 340 Press Tool, (2) 18V Advanced Lithium 2 Batteries, 120V Advanced Lithium Battery Charger, and Carrying Case

more >>
Ohio Power Tool
$2,673.92 See It
COBRA 27 Calibre Cobra Powder Actuated Tool Kit, Powder Actuated Tools

* Includes case & safety glasses * Fires to 2-1/2" 3" washered) drive pins * Weighs only 5lbs * Uses "more powerful" 10 shot strips * 27 caliber loads instead of 22 caliber * RAMSET is the standard by which * Others are compared The Cobra is the ideal tool for all your remodeling needs. Low velocity piston drive tool -provides added safety on the job. Padded recoil-absorbing handle-for greater operator comfort. Fastens up to 3" standard Ramset drive pins and threaded studs - ideal for general construction applications. Weight: 4 1/2 lbs. Length: 13 1/4 in Muzzle Bushing O.D.: 9/16" Uses .27 Caliber 10-shot strip loads,3(green)4(yellow)5(red) Pin Capacity: 2 1/2 in ( 3"w/washer) Caution: Always wear eye and ear protection at all times. If you aren't sure which power level to use then start with a lower level and work your way up. And remember that 1" of penetration into concrete is the rule of thumb. And yes, with the proper power level and correct length you c

more >>
Toolup.com
$214.02 See It
RIDGID RP 340-B Press Tool Kit with ProPress Jaws (1/2" - 2") 43358

RIDGID RP 340-B Press Tool Kit with ProPress Jaws (1/2" - 2") 43358 30% smaller tool increases maneuverability.* 17% lighter tool reduces operator fatigue.* 31% longer service interval (up to 42,000 cycles) maximizes uptime.* More than 400 presses per charge (with Advanced Lithium 4 Battery). Ultimate flexibility with the ability to switch between battery and AC power on the same tool. * Versus RP 330-B Specifications: Capacity: 1/2" - 4 (Copper and Stainless Steel), 1/2" -2" (PEX) 270à ° Barrel/Jaw Swivel Hydraulic Ram Output: 7,200 lbs. (32kN) Weight: 8.5 lbs. (w/Battery), 9.5 lbs. (w/AC Power Adapter) Operating Temperature Range: 15à °F to 122à °F Approximate Cycle Time: 4 seconds LED-light For Continued Operations In No or Low-light Environments Longest service interval in the industry: 42,000 Cycles Compatible With All Standard Series Pressing Jaws and Attachments From RIDGID For Use With Copper and Stainless Steel Tubing, Steel Pipe, PEX and Cutting Soil Pipe. Battery Tool Kit Includes: RP 340 Press Tool, (2) 18V Advanced Lithium 2 Batteries, 120V Advanced Lithium Battery Charger, and Carrying Case

more >>
Ohio Power Tool
$3,145.78 See It
RIDGID RP 340-B Press Tool w/ No Jaws 43348

RIDGID RIDGID RP 340-B Press Tool w/ No Jaws 30% smaller tool increases maneuverability.* 17% lighter tool reduces operator fatigue.* 31% longer service interval (up to 42,000 cycles) maximizes uptime.* More than 400 presses per charge (with Advanced Lithium 4 Battery). Ultimate flexibility with the ability to switch between battery and AC power on the same tool. * Versus RP 330-B Specifications: Capacity: 1/2" - 4 (Copper and Stainless Steel), 1/2" -2" (PEX) 270à ° Barrel/Jaw Swivel Hydraulic Ram Output: 7,200 lbs. (32kN) Weight: 8.5 lbs. (w/Battery), 9.5 lbs. (w/AC Power Adapter) Operating Temperature Range: 15à °F to 122à °F Approximate Cycle Time: 4 seconds LED-light For Continued Operations In No or Low-light Environments Longest service interval in the industry: 42,000 Cycles Compatible With All Standard Series Pressing Jaws and Attachments From RIDGID For Use With Copper and Stainless Steel Tubing, Steel Pipe, PEX and Cutting Soil Pipe. Battery Tool Kit Includes: RP 340 Press Tool, (2) 18V Advanced Lithium 2 Batteries, 120V Advanced Lithium Battery Charger, and Carrying Case

more >>
Ohio Power Tool
$2,222.00 See It
Cut-off Tools 3 in. Cut-Off Tool H4210

Free Shipping on Over 500K Items!

Shop for Tools & Hardware at The Home Depot. The new Husky air tool line in built to industrial standards for the professional user providing more power, less noise and longer life. This new Husky 3 in. Cut-Off Tool features low weight housing with

more >>
Home Depot
$44.98 See It
RIDGID RP 340-C Corded Press Tool Kit without ProPress Jaws 43363

RIDGID RP 340-C Corded Press Tool Kit Without ProPress Jaws 43363 30% smaller tool increases maneuverability.* 17% lighter tool reduces operator fatigue.* 31% longer service interval (up to 42,000 cycles) maximizes uptime.* More than 400 presses per charge (with Advanced Lithium 4 Battery). Ultimate flexibility with the ability to switch between battery and AC power on the same tool. * Versus RP 330-B Specifications: Capacity: 1/2" - 4 (Copper and Stainless Steel), 1/2" -2" (PEX) 270à ° Barrel/Jaw Swivel Hydraulic Ram Output: 7,200 lbs. (32kN) Weight: 8.5 lbs. (w/Battery), 9.5 lbs. (w/AC Power Adapter) Operating Temperature Range: 15à °F to 122à °F Approximate Cycle Time: 4 seconds LED-light For Continued Operations In No or Low-light Environments Longest service interval in the industry: 42,000 Cycles Compatible With All Standard Series Pressing Jaws and Attachments From RIDGID For Use With Copper and Stainless Steel Tubing, Steel Pipe, PEX and Cutting Soil Pipe. Corded Tool Kit Includes: RP 340 Press Tool, AC Power Adapter and Carrying Case

more >>
Ohio Power Tool
$2,077.14 See It
General Tools Mmd4e The Seeker Digital Moisture Meter

General Tools The Seeker Digital Moisture Meter Whether you're a professional contractor or a conscientious home owner, General's ultra-sensitive Moisture Meters help you to easily detect hidden leaks in wood, concrete, plaster and carpet. Available as both analog and digital models, the Meters provide accurate moisture level readings and are great for new home inspections, locating roof leaks or even selecting dry lumber at the yard. Features: 99.9 count LCD w/0.4 in. high digitsWood/building materials selection switchLow, Medium and High moisture sounds and on-screen iconsHigh accuracy and resolutionData hold + auto power off + low battery indicatorReplaceable stainless steel pins (#PIND4E)Powered by "9V" battery (included)Includes: Protective capBatteryUser's manual 9.50 L. 5.00 W. 0.25 H.

more >>
Global Industrial
$44.95 See It
Air Ratchet Wrenches: Florida Pneumatic Air Powered Tools Reaction-Less Ratchet FP-728RW

Free Shipping on Over 500K Items!

Shop for Tools & Hardware at The Home Depot. The FP Air Tool line is built to industrial standards for the professional user providing more power, less noise and longer life. This Reaction Less Ratchet features low weight housing with rubberized

more >>
Home Depot
$133.98 See It
CP Hydraulic PAC P 9 HP Honda Gasoline Power Pack 1807008026

Atlas Copco power packs virtually anywhere: fitted with wheels and handles, they are easy to manoeuvre around building sites. They are easy to start, the noise level is low, and when they are not in use, the power packs are small enough to be stored on shelves. They are also lightweight enough that two people can lift one up and fit it in the back of a van. The reliable motor, weather you chose petrol, diesel or electric, supplies hydraulic power in accordance with the ?Power-on-Demand?-principle, i.e. the power pack runs idle until the tools begins to work. The power packs are protected by a strong frame made of steel tube. They have been tested for more than 1 000 hours of operation and with several thousand units in daily operation. Description LP 13-30 P PAC** Part no 1807 0110 23 Motor/Engine 13 HP Honda petrol Weight incl. oil (kg) 91

more >>
Ohio Power Tool
$4,627.50 See It
CP Hydraulic PAC D 10 HP Lombardini Diesel Power Pack 1807011027

You can use the Atlas Copco power packs virtually anywhere: fitted with wheels and handles, they are easy to manoeuvre around building sites. They are easy to start, the noise level is low, and when they are not in use, the power packs are small enough to be stored on shelves. They are also lightweight enough that two people can lift one up and fit it in the back of a van. The reliable motor, weather you chose petrol, diesel or electric, supplies hydraulic power in accordance with the ?Power-on-Demand?-principle, i.e. the power pack runs idle until the tools begins to work. The power packs are protected by a strong frame made of steel tube. They have been tested for more than 1 000 hours of operation and with several thousand units in daily operation. Description LP 13-30 P PAC** Part no 1807 0110 23 Motor/Engine 13 HP Honda petrol Weight incl. oil (kg) 91

more >>
Ohio Power Tool
$6,480.00 See It
Grizzly G4143 10 Tpi Raker Bandsaw Blade

Saw Blade - Width: 0.4" - Material: Steel - Blade Size: 80" Length x 25 mil Thickness

more >>
Ohio Power Tool
$3,940.38 See It
General Tools Irt206 The "Heat Seeker" Mid-Range Infrared Thermometer

The "Heat Seeker" Mid-Range Infrared Thermometer Ideal for most applications in HVAC/R, plumbing and heating, electrical, automotive and other industrial jobs. The new IRT206 "Heat SeekerTM" is a precision measuring device used for obtaining accurate temperatures instantaneously without having to contact the object being measured. It works by capturing and measuring the invisible infrared energy naturally emitted from all objects. It offers an easy and safe method to instantaneously measure surface temperatures of objects which are difficult or unsafe to contact. The "Heat Seeker" has a rugged, ergonomic design and features a backlit LCD display with built-in laser sighting. The IRT206 has a measurement range of -4 to 604 F (-20 to 317 C) and utilizes a switchable on/off laser pointer for target location. The practical distance-to-spot ratio of 8:1 is suitable for most consumer and commercial applications. Rugged and ergonomic design for general purposesUltra low power consumption in shutdown modeExtended long time measuring reliabilityBacklit LCD displaySwitchable On/Off Laser sighting F or C selectableAuto OffROHS, CE, WEEEIncludes: 9V Battery 10.88 L. 6.00 W. 1.63 H.

more >>
Global Industrial
$29.95 See It
General Tools Mmd5np Non-Invasive Digital Moisture Meter

Non-Invasive Digital Moisture Meter The wide-range MMD5NP enables moisture measurement of a variety of materials without having to pierce the material's surface. The unit has a range of 0.0 to 99.9% WME for wood, and 0.0 to 56.5% WME for building materials, and measures up to a depth of 3/4 in. It sports a Jumbo LCD display with intuitive on-screen icons for low/medium/ high moisture content, and wood/concrete mode. Features: Non-invasive measurement techniqueJumbo displayWide measurement rangeIntuitive on-screen icons: Low/Medium/High moisture content; wood/concrete modeHold functionAudible peak reading alertAuto-calibratingAuto Power OffLow and very low battery warningsSpecifications: Measurement Ranges: 0 to 99.9% WME (Wood Moisture Equivalent) for wood; 0 to 56.5% forbuilding materialsMeasurement Accuracy/Resolution: 3%/0.1%Measuring Depth: 3/4 in. (20mm)Display Type/Size: 99.9 count LCD with 0.4 in.(10mm) high digitsAuto Power Off Trigger: 3 to 4 minutes with 0% reading Low/Very Low Battery Warning Triggers:<7.5V/<6.5VOperating Temperature:32 to 122 F (0 to 50 C)Operating Relative Humidity: <80%Power Source: 1 9V battery (included)Includes: BatteryUser's Manual 9.63 L. 6.50 W. 1.25 H.

more >>
Global Industrial
$58.95 See It
Porter-Cable 18V 4-Tool Combo Kit - Drill/Driver, Impact Driver, Reciprocatin

Porter-Cables PC418IDC-2 18-volt NiCd 4-tool combo kit includes the PC1800D drill/driver, the PC1800ID impact driver, the PC1800RS reciprocating saw, and the PC1800L flashlight, a combination of tools that provides the power and functionality needed for an incredible range of jobs. This combinations vast assortment of features makes the kit ideal for contractors, electricians, woodworkers, construction workers, and home DIY enthusiasts.The Porter Cables PC418IDC-2 Features: * PC1800D Drill/Driver Features: * 2 speed gearbox for tough jobs: High gear provides faster rpm for fast drilling, while low gear offers high torque for heavy duty screwdriving applications * High performance motor and gearbox delivers up to 440 in-lbs of torque * 1/2-Inch single sleeve chuck offers excellent bit retention and durability * PC1800ID Impact Driver Features: * Impact driver delivers 1600 in-lbs high-torque output without kickback * With a length of

more >>
Max Tool
$158.99 See It
0729-20 V28 Bandsaw (Bare Tool), Tool Type

Milwaukee 0729-20 Specifications: • Volts: 28V • Amp Hours: 3.0 • No Load Speed: 0-225 / 0-350 FPM • Capacity in Rectangular Stock:: 4-3/4" x 4-3/4" • Number of Batteries Included: 0 • Overall Length: 22" Milwaukee 0729-20 Features: • Tool Only • 28V Milwaukee High Power Motor cuts as fast as corded version! • Deep Cut full 4-3/4" x 4-3/4" cutting capacity • LED light aids cutting visibility • High/Low speed selector switch with lock • Comfortable non-slip, soft-grip reduces vibration and fatigue • Over 200 cuts of 1" conduit per battery charge • Two finger trigger speed control • Up to 2X the run time of 18V tools • Delivers up to 40-50% more power • 28 volts of power at 18 volt bat

more >>
Toolup.com
$289.76 See It
409-MM5000 - Electrician's TRMS Multimeters by Klein Tools

Analog bar graph for fast moving readings Auto-ranging multimeter measures AC/DC voltage and resistance All adjustments made from top of beam Easy-to-access fuse and battery compartment Includes low battery indicator, auto power-off, 4000-count

more >>
Kats Safety
$140.19 See It
318-DMM333 - Digital Pocket Multi-Meters by General Tools

Analog bargraph Auto power off Auto ranging Continuity check w/beep, diode check Data Hold Digital credit card style multi-meter Fast sampling rate Low battery indicator

more >>
Kats Safety
$31.54 See It
4" X 36" BELT 6 " DISC SANDER 6 in.

This 4" x 36" Belt / 6" Disc Sander Delivers Large Sanding in a Tight Frame Low mount sanding disc delivers the same unique sanding and grinding of normal disc sands without obstructing work on the belt, and while offering more stability during use.

more >>
Sears
$151.99 See It
General Tools Ngd7201 Precision Gas Detector "Gas Dog"

Precision Gas Detector "Gas Dog" Ideal for Industrial uses such as gas furnaces and plant maintenance. Features: Detects very low levels of methane and propaneTwo dedicated 5-level LED bar graphsAuto-calibratingHeadphone jackReliable solid state sensorRedundant visual and audible alarmsAudible alarm muteAuto power offLow battery warningUnique compact ergonomic designVariable alarm set pointCE and RoHS approvedIncludes: Stainless steel flexible probeMolded hard caseBatteriesOperating instructions 12.00 L. 8.00 W. 3.00 H.

more >>
Global Industrial
$150.95 See It
General Tools Dlm1337 Jumbo Display Wide Range Digital Light Meter

Jumbo Display Wide Range Digital Light Meter Ideal for Outdoor - Indoor Lighting. 3-1/2 digit LCD displays LUX, FC, low battery, MAX & HOLD indicationAccurately displays light level in foot candles (FC) or LUX over a wide rangeMax hold and data holdAuto power offEasy to usePocket sized and lightweightCubic lead protectionIncludes: Includes 6 AAA batteries, Sensor and Hard case 6.25 L. 7.50 W. 2.25 H.

more >>
Global Industrial
$85.95 See It
Search within results