1 to 20 of  100 products for magma control valve regulator

No exact matches found for magma control valve regulator

100 similar items found

Gas Heating Valve - 1/2" Inlet, Hi-Lo Pressure Regulator 1.7" - 3.5" Nat.

The 710 low capacity gas heating valves are designed for fireplace log control and other applications with limited space. All models include a manual valve (gas cock), automatic pilot safety valve, pilot outlet, pilot gas filter and pilot adjusting key. The control can be mounted in any position except upside down and all models have 3-position outlets. Regulated 710 series gas valves can be converted from natural to L.P. gas by using the replacement pressure regulators. Use 1751-003 to convert gas valves to Natural Gas. Use 1751-013 to convert gas valves to L.P. Gas. Major changes to the terminals on millivolt valves were made in 1996. For 12 VDC applications use 24 volt models. 1000 BTU/Cu. Ft. 0.64 sp. gr. natural gas @ 1" W.C. pd. 7.50 L. 5.00 W. 4.50 H.

more >>
Global Industrial
$153.95 See It
Gas Heating Valve - 1/2" Inlet, 3/8" Outlet, Hi-Lo Pressure Regulator

The 710 low capacity gas heating valves are designed for fireplace log control and other applications with limited space. All models include a manual valve (gas cock), automatic pilot safety valve, pilot outlet, pilot gas filter and pilot adjusting key. The control can be mounted in any position except upside down and all models have 3-position outlets. Regulated 710 series gas valves can be converted from natural to L.P. gas by using the replacement pressure regulators. Use 1751-003 to convert gas valves to Natural Gas. Use 1751-013 to convert gas valves to L.P. Gas. Major changes to the terminals on millivolt valves were made in 1996. For 12 VDC applications use 24 volt models. 1000 BTU/Cu. Ft. 0.64 sp. gr. natural gas @ 1" W.C. pd. Made in the USA. 7.50 L. 5.00 W. 4.50 H.

more >>
Global Industrial
$154.95 See It
1 007M1-QT Double Check Valve Assembly - Bronze, 1"

Product Information:A brand of Watts Water Technologies, Watts Regulator Company is an innovative manufacturer of water quality products for your plumbing needs. The 1 inch 007M1QT (Part # 0062306) Series 007 Double Check Valve Assembly prevents the backflow of contaminated water into the potable water supply. It consists of a bronze body construction that is easy to maintain and service. It is ideal at referenced crossconnections identified as nonhealth hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar). Features:#149; Cast Bronze body construction#149; Prevents the reverse flow of polluted water from entering potable water system#149; For nonhealth hazard continuous pressure applications#149; Provides protection against backsiphonage and backpressure backflow#149; Ease of maintenance: Only one cover#149; Top entry#149; Replaceable seats and seat discs#149; Modular construction#149; Compact design#149; Top mounted ball valve test cocks#149; Low pressure drop#149; No special tools required for servicing#149; Tee handles Specifications:#149; Model: 1 007M1QT#149; Product Number: 0062306#149; Size: 1 inch, 25mm#149; Temperature Range: 33 #149; 180 Degrees F (0.5 #149; 82 Degrees C)#149; Maximum Working Pressure: 175psi (12.1 bar)#149; Approvals: ASSE, AWWA, IAPMO, CSA, UPC#149; Approved by the Foundation for CrossConnection Control and Hydraulic Research at the University of Southern California#149; Horizontal approval

more >>
Westside Wholesale
$112.51 See It
Water Heating Control - 38k Capacity, 1/2" Inlet Pipe

The Robertshaw 110 and 220 Series gas water heater valves were first manufactured for the O.E.M. market in 1955. For the last 50 years, the 110 series has been the definitive gas water heater valve. Over the years, minor product improvements were incorporated, but the valves have remained basically the same. In 1995, Robertshaw introduced the new 220R Series gas water heater valve. The new 220R Series will mount and operate in the same manner as the original 110 Series. The 220R features simplified pilot lighting and easy-to-adjust gas pressure regulator. The 110 Series Water Heater Thermostat Uni-Kit and Commercial Water Heater Thermostat Uni-Kits were designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic and RV models have a 160 F temperature high stop. All commercial models have a 180 F temperature high stop. All models have a 5-1/2" sensing element and vary by inlet and outlet size, shank length, regulator type and setting.Made in the USA. 14.50 L. 9.50 W. 6.00 H.

more >>
Global Industrial
$222.95 See It
Water Heating Control - 45k Capacity, 1/2" Inlet Pipe, 4.0" W.C Nat. Gas Reg.

The Robertshaw 110 and 220 Series gas water heater valves were first manufactured for the O.E.M. market in 1955. For the last 50 years, the 110 series has been the definitive gas water heater valve. Over the years, minor product improvements were incorporated, but the valves have remained basically the same. In 1995, Robertshaw introduced the new 220R Series gas water heater valve. The new 220R Series will mount and operate in the same manner as the original 110 Series. The 220R features simplified pilot lighting and easy-to-adjust gas pressure regulator. The 110 Series Water Heater Thermostat Uni-Kit and Commercial Water Heater Thermostat Uni-Kits were designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic and RV models have a 160 F temperature high stop. All commercial models have a 180 F temperature high stop. All models have a 5-1/2" sensing element and vary by inlet and outlet size, shank length, regulator type and setting. 9.25 L. 6.00 W. 5.00 H.

more >>
Global Industrial
$74.94 See It
Regulators Abyss 52 Regulator - High Performance (Over $400)

Mares Regulators Abyss 52 Regulator - High Performance (Over $400) - FREE SHIPPING - *Brand new & completely redesigned with SuperFlex Hose *SuperFlex hose - lightweight flexible double braided hose designed to outperform and outlive traditional rubber hoses *Nitrox Compatible to 40% (The Recreational Limits of Nitrox) *Moisture Retention System (Chrome and Nickel-plated Brass all Metal 2nd stage) reduces dry mouth and enhances comfort *All Metal Technology for high performance in all temperature extremes - especially in cold water *Mesh Grid design optimizes the flow of water around the second stage diaphragm minimizing the likelihood of free-flow. *Tri-Material Valve for optimized performance safety reliability and durability *VAD (Vortex Assisted Design) by-pass system for effortless natural breathing under all conditions * Double DFC (Dynamic Flow Control) System for improved performance at any depth * FULL MANUFACTURER'S WARRANTY - Scuba Gear diving equipment and dive gear with customer reviews

more >>
Scuba.com
$648.95 See It
Buyers Hydraulic Spreader Valve - 7/15 GPM, Model HV715

Dual flow regulator has on/off control plus system relief and pressure compensated to 22 GPM or less for small trucks. Relief PSI 1,500, Port Size in. 3/4 NPT, Flow GPM 7/15, Material Type Aluminum, Max. PSI 2,000. Differential style relief valve

more >>
Northern Tool
$279.99 See It
Squeeze Valve with Pilot for Item 173850, Model V-880P/H-1

Squeeze valve with adjustable pilot and handle works with Red Dragon torch kit for easy spot burning of weeds. Controls pilot flame and saves fuel when not burning weeds. U.S.A. Handle Length in. 7, Regulator Included No, Flame Control Trigger Yes,

more >>
Northern Tool
$49.99 See It
Accu-Sync Adjustable Pressure Regulator

Accu-Sync Adjustable Pressure Regulator. Regulating pressure saves water and extends the life of the irrigation system. Saving water is achieved through regulation by operating each zone at the best pressure for that equipment and application type. Accu-Sync is a simple pressure regulator designed to be compatible with all of Hunter’s control valves. The adjustable model enables the zone pressure to be set anywhere between 20 and 100 PSI,  From a reliability standpoint, Accu-Sync is unparalleled. Glass-filled nylon construction makes the Accu-Sync strong enough to handle the rigors of any project.Note: Valve not included.

more >>
Drip Depot
$79.99 See It
962-2 - Commercial Grade Double Gauge Kegerator Beer Regulator with Air Splitter

The Kegco 962-2 double gauge commercial grade regulator is perfect for dispensing two kegs off of one Co2 tank at the same pressure. You can also dispense off one valve at the set pressure while running the second valve to a secondary regulator to lower the pressure to subsequent kegs.It features a T-Style adjustment valve which makes it easy to adjust the pressure inside the keg. The top gauge on the regulator indicates how much Co2 pressure is inside the keg, while the side gauge lets you know how much Co2 is left in the tank, so you know when it's about time to get the tank filled. The Y splitter on the bottom of the regulator has two independent shut off valves, allowing you to run a single keg at a time. This regulator features automatic flow control to meet industry standards in commercial environments.

more >>
Beverage Factory.com
$61.95 See It
962 - Commercial Grade Double Gauge Kegerator Beer Regulator

The Kegco 962 double gauge commercial grade regulator features a T-Style adjustment valve which makes it easy to adjust the pressure inside the keg. The top gauge on the regulator indicates how much Co2 pressure is inside the keg, while the side gauge lets you know how much Co2 is left in the tank, so you know when it's about time to get the tank filled. This regulator features automatic flow control to meet industry standards in commercial environments.

more >>
Beverage Factory.com
$48.95 See It
962-N - Commercial Grade Double Gauge Nitrogen Beer Regulator

The Kegco 962-N double gauge commercial grade nitrogen regulator is ideal when dispensing stout beer or using mixed blend gas. The top gauge on the regulator indicates how much nitrogen pressure is inside the keg, while the side gauge lets you know how much gas is left in the cylinder. It features a T-Style adjustment valve which makes it easy to adjust the pressure inside the keg and automatic flow control to meet industry standards in commercial environments.

more >>
Beverage Factory.com
$48.95 See It
Water Heating Control - 10k Capacity, 3/8" Inlet Pipe

The Robertshaw 110 and 220 Series gas water heater valves were first manufactured for the O.E.M. market in 1955. For the last 50 years, the 110 series has been the definitive gas water heater valve. Over the years, minor product improvements were incorporated, but the valves have remained basically the same. In 1995, Robertshaw introduced the new 220R Series gas water heater valve. The new 220R Series will mount and operate in the same manner as the original 110 Series. The 220R features simplified pilot lighting and easy-to-adjust gas pressure regulator. The 110 Series Water Heater Thermostat Uni-Kit and Commercial Water Heater Thermostat Uni-Kits were designed for universal replacement applications. All models feature built-in, non-cycling Energy Cut-Off (ECO) system to shut off all gas to the water heater in case of excessive water temperatures. If an ECO has detected an over-temperature condition and has opened, the control will not function and a new replacement will be required. All domestic and RV models have a 160 F temperature high stop. All commercial models have a 180 F temperature high stop. All models have a 5-1/2" sensing element and vary by inlet and outlet size, shank length, regulator type and setting. 9.25 L. 6.00 W. 5.00 H.

more >>
Global Industrial
$195.95 See It
Ipr101 Ipr Valve Fuel Injection Pressure Control Regulator Reman

A core deposit of $50.00 is included in the price of this part. If you ship back your old injector(s), we can refund you the core deposit.

more >>
Amazon
$226.59 See It
AGD Automag Regulator Valve Pin and Spring

This part works in conjunction with the Regulator Seat to control the air pressure in the chamber. It is not normally a wear part and should last a lifetime. Keep it clean.

more >>
ANSgear Paintball
$8.95 See It
S360 Regulator, Second Stage Only

The SCUBAPRO S360 Second Stage is based on the new 560 Second Stage, but with Pre-Tuned Inhalation for Uncomplicated-Use. It's an ideal choice for avid divers wanting Performance yet a simple to Operate-System. The S360 Second Stage is an Air-Balanced-Flow-Valve Design with a Techno-Polymer Barrel with a Rugged, Precision Molded Carbon Fiber and Techno-Polymer Case. The Diver Adjustable Venturi Initiated Vacuum Assist (VIVA) Dive/Pre-Dive Control Switch and Extra High Flow Exhaust Valve account for Easy Inhalation & Exhalation at any Depth or Breathing Rate. The Regulator comes equipped with a 3/8" Threaded Super-Flow Hose with Strong and Durable Kevlar Lining and a Super-Comfort High-Flow (HF) Mouthpiece for Smooth Air Delivery. The Second Stage Regulator weighs 5.6oz (158g) and is covered by a Limited Lifetime Warranty.

more >>
Leisure Pro
$214.00 See It
Air 2, Combination Octopus/Inflator Regulator

When you took dive lessons you learned to perform specific skills to make you safe and comfortable underwater and at the surface. One of those skills was buoyancy control. Once you start diving for fun you use your buoyancy control devise constantly throughout the dive. Your octopus or alternate air source devise on the other hand is never used unless there is an emergency out of air situation. Reacting properly in an out of air situation can make the difference between a safe dive and a tragedy. If your alternate air source and your BCD inflator devise are one and the same you will always know where to find it in an emergency. The 5th generation of the Air 2 by Scubapro is a second stage regulator and balanced inflator in a single, compact housing. The Air 2 - 5th Generation builds upon an already superior product. It is lightweight, streamline, and eliminates the need for a backup-regulator. The Air 2's air-balanced power inflator valve means you'll have a steady stream of air, re

more >>
Leisure Pro
$219.00 See It
Al Forno Patio Pizza Oven & Tool Set

Using double-insulated stainless steel and smart domed design for even heat circulation, our portable pizza oven duplicates the fast, rich and rustic flavor of Italian woodfire oven pizzas at home. With a simple 1-lb. propane canister (not included), you can preheat and cook at up to 700ºF in about 15 minutes. Features a ventilated door for easy opening, built-in micro-adjust valve for flame control, cordierite ceramic pizza stone, and internal air temperature gauge monitor. Beyond pizza, it’s great for baking breads, roasting meats and vegetables. Comes with a regulator and 5 ft. hose for standard bulk propane tanks, or you can use it with a disposable 1-lb. propone canister (not included). And to really get your party started, add the Artisan Tool Set with a stainless steel sheet spatula, two bamboo pizza peels, rocking pizza cutter, and an infrared digital cooking thermometer for pinpoint accuracy. Imported. Outdoor use only. Pizza Oven measures 15 x 26 x 16” h. (opening, 22 ¼ x 4 ¼”; stone, 13 x 20”); Stainless Steel Spatula, 17¾ " x 8”; Pizza Peels, 11 ¾ x 19 ¼” long; Rocking Pizza Cutter,  14" x 4"; Infrared Digital Thermometer, 6 x 3 ”.

more >>
NapaStyle
$599.00 See It
Air Regulator AK1R

The AK1R paint gun air adjusting valve from Iwata will let you take control of airflow.The 8131 control valve model has an easy to read EPA-compliant gauge, and a non-slip control knob to provide consistent air flow Compact design EPA-compliant gauge to 40 CFR standard Consistent air flow Non-slip control knob Easy to read gauge ranging from 0-60 PSI The AK1R Air Regulator valve will help you maintain efficiency and consistent air flow with your spray guns.

more >>
Eastwood.com
$69.99 See It
 Cabinet Radiant Propane Heater Ra18lpdg - 18000 Btu

Dyna-Glo Cabinet Radiant Propane Heater RA18LPDG - 18000 BTU Cabinet Propane Heater Provides A Convenient, Portable Heater For Workshops, Farms, Loading Docks, Construction Sites And More. Heaters are made using a wind resistant burner system with warm-glow radiant heating plaques. Easy to use integrated knob Piezo-ignition. Built-in oxygen depletion sensor turns heater off in unsafe oxygen levels. Auto shut-off tip over device provides additional safety. Variable heat setting control valve with 3-heat settings from 6,600 to 18,000 BTU heat output. 20 lb. propane cylinder (not included) provides 21-65 hours of operation. Includes hose and regulator. Front and rear locking casters provide easy mobility and added stability. CSA approved. Not for use in residential living areas or in inadequately ventilated areas. Proper ventilation required during operation. Note that the tank is not included. 17.52 L. 16.06 W. 23.23 H.

more >>
Global Industrial
$116.95 See It
Search within results
  • Find by Price
    • $ to $