1 to 20 of  100 products for marlin rimfire fire sights marlin 25m25nm fire sights

No exact matches found for marlin rimfire fire sights marlin 25m25nm fire sights

100 similar items found

Marlin Rimfire Fire Sights - Marlin Mod. 60 Fire Sights

Dovetail sights replace the factory open sight sets on your Marlin rimfire. U-shaped, green, fiber optic, rear sight contrasts well with the red, front bead. Adjustable for windage and elevation. Mfg: Williams Gun Sight SPECS: Aluminum, black anodized. Model 60 also fits 915Y, 925, 925M, 981T, and 983T.

more >>
Brownells
$29.99 See It
Rifle Fire Sights - Red Fire Sight Fits 260n

Easy-to-install front sights for popular centerfire and muzzleloading rifles gather ambient light for superb visibility. The more light, the brighter the round, red beads glow; won’t “wash out” even in the strongest sunlight. Narrow sights fit Williams Streamlined and Shorty Ramps. Medium sights fit most factory ramps including Marlin and Remington. Wide sights are for .22 rimfire rifles and muzzleloaders. Mauser 98 model for .200 dovetail. Mfg: Williams Gun Sight SPECS: Blued steel. Fiber optic insert. Beads: 1/16" (1.6mm) dia. Fit nominal 3/8" dovetail. Number indicates height - Height measured from bottom of dovetail to top of sight; letter (N, M or W) indicates base width: N Series -.250" (6.3mm) wide base. M Series - .340&qu

more >>
Brownells
$15.99 See It
Rifle Fire Sights - Red Fire Sight Fits 290n

Easy-to-install front sights for popular centerfire and muzzleloading rifles gather ambient light for superb visibility. The more light, the brighter the round, red beads glow; won’t “wash out” even in the strongest sunlight. Narrow sights fit Williams Streamlined and Shorty Ramps. Medium sights fit most factory ramps including Marlin and Remington. Wide sights are for .22 rimfire rifles and muzzleloaders. Mauser 98 model for .200 dovetail. Mfg: Williams Gun Sight SPECS: Blued steel. Fiber optic insert. Beads: 1/16" (1.6mm) dia. Fit nominal 3/8" dovetail. Number indicates height - Height measured from bottom of dovetail to top of sight; letter (N, M or W) indicates base width: N Series -.250" (6.3mm) wide base. M Series - .340&qu

more >>
Brownells
$15.99 See It
Marlin & Winchester Lever Action Fire Sights - Dovetail Fire Sights

All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. For Marlin and Winchester lever action rifles. Dovetail replaces factory front and rear sights. Rear sight is screw adjustable for elevation and drift adjustable for windage; has two, green, fiber optic dots. Front has red, fiber optic rod. FP sight sets have a Foolproof, micro-adjustable, peep Mfg: Williams Gun Sight SPECS: Aluminum, black anodized. Dovetail fits all Winchester and Marlin lever actions with ramped front sights. FP-94/36 fits Win. 94 top eject and models 55, 63, 64, and 65; Marlin 36, 336, 1894, 1895 and 444. Will not fit Win. 94/22. Requires two holes in the left side of the receiver and will

more >>
Brownells
$33.99 See It
Taurus Fire Sight Fiber Optic Sight Sets - Fits Taurus Pt/Pro W/Dovetail Sights, Adjustable

Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the rods glow. 3-dot sight picture; front sight has red insert, rear has two green inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable. Mfg: Williams Gun Sight

more >>
Brownells
$59.99 See It
''''wgrs'''' Receiver Sights - Wgrs-336 Fits Marlin 336

In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3/16'''' (4.8mm) Open Sight Blade.

more >>
Brownells
$35.99 See It
Ruger 10/22 Fire Sights - Wgrs-Ru22 Fire Sights

All sets feature a bright red, fiber optic, front sight and fully adjustable peep or U-notch, rear sight. U-notch, rear sight sets use the highly accurate, 3-dot pattern with two green, fiber optic dots at the rear for sharp contrast and quick sight acquisition in all light conditions. No drilling or tapping required for most rifle models. Dovetailed front and rear sights may require minor fitting. High visibility, fast to pickup, sight systems for the Ruger® 10/22®. WGRS features low profile, guide receiver, peep sight and red, fiber optic, front sight. 3-Dot has U-notch rear blade with green dots, red front sight. Adjustable for windage and elevation. Mfg: Williams Gun Sight SPECS: Aluminum, black anodized. Front - .530'''' high, 1/16'''' red fiber optic bead. Fits Ruger 10/22 only.

more >>
Brownells
$41.99 See It
Shotgun Fire Sights - Mossberg Fire Sights

Models for Browning BPS, pre-2003 Remington 870/1100, Mossberg 500 and Winchester 1300 guns equipped with slug or turkey barrels and factory sight bases. Front sight provides a glowing red dot that’s easily seen in all ambient light conditions. Fully adjustable, U-notch rear has two glowing green dots for precise sight alignment. Mfg: Williams Gun Sight SPECS: Machined aluminum, black, anodized. Rear - "U" notch fiber optic. Front - Fluorescent red front bead on sheared-style blade. Includes instructions. Browning fits BPS shotgun with slug barrel; does not fit vent rib barrel. Remington fits Remington shotguns with 3/8" doveta

more >>
Brownells
$27.99 See It
Shotgun Fire Sights - Sight Set For Rem 700ml Pre 2003

Models for Browning BPS, pre-2003 Remington 870/1100, Mossberg 500 and Winchester 1300 guns equipped with slug or turkey barrels and factory sight bases. Front sight provides a glowing red dot that’s easily seen in all ambient light conditions. Fully adjustable, U-notch rear has two glowing green dots for precise sight alignment. Mfg: Williams Gun Sight SPECS: Machined aluminum, black, anodized. Rear - "U" notch fiber optic. Front - Fluorescent red front bead on sheared-style blade. Includes instructions. Browning fits BPS shotgun with slug barrel; does not fit vent rib barrel. Remington fits Remington shotguns with 3/8" doveta

more >>
Brownells
$24.99 See It
''''wgrs'''' Receiver Sights - Wgrs-54 Fits Sav-Ans, Rem, Win.

In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights. Mfg: Williams Gun Sight SPECS: Aluminum, black, anodized. Peep height is approximately the same as a 3/16'''' (4.8mm) Open Sight Blade.

more >>
Brownells
$35.99 See It
1911 Fiber Optic Rear Sights - Fiber Optic Lo-Mount Rear Sight, Green, Fits Colt 1911

Advanced light gathering properties of fiber optic rods make maximum use of ambient light to provide a bright glow that stands out against dark backgrounds and puts you on target fast, even in low-light or high-stress situations. Fronts and rears sold separately, so you can create a custom, three-dot, fiber optic system tailored to your shooting needs. Available with red or green inserts. Lo-Mount rear sights have radiused edges that won’t snag on holster or clothing. Colt rear sight fits Government model; requires milling, installation instructions included. Mfg: Novak SPECS: Machined steel, matte black finish with fiber optic rods in red or green. Colt – Rear: 1" (2.5cm) long, .72" (1.8cm) wide, .46" (1.17cm) high, with .125" (3.2mm) wide notch. Fits Government model; milling required, instructions included. Kimber - Rear: Green inser

more >>
Brownells
$49.99 See It
Fiber Optic Front Sights - Fiber Optic Front Sight, Red, .175'''' High, Fits Colt 1911

Advanced light gathering properties of fiber optic rods make maximum use of ambient light to provide a bright glow that stands out against dark backgrounds and puts you on target fast, even in low-light or high-stress situations. Fronts and rears sold separately, so you can create a custom, three-dot, fiber optic system tailored to your shooting needs. Available with red or green inserts. Front sight can also be used with Novak’s plain, wide-notch rear. Kimber and Taurus front sights are the same height as factory sights and fit factory dovetails; no machining required. Mfg: Novak SPECS: Machined steel, matte black finish with fiber optic rods in red or green. Colt – Front: Blade is .64" (1.6cm) long, .127" (3.2mm) wide. Fits Government model; milling required, instructions included. Kimber - Front: Red insert. Blade is .650" (16.5mm) long, .125" (3

more >>
Brownells
$41.99 See It
Ruger 10/22 Gi-Style Aperture Sights - Tsr200 10/22 Sight Set

Replacement sight sets give your 10/22 a longer sight radius for improved accuracy potential, plus the same sight picture as an AR-15/M16 with military-issue sights. Installation requires no gunsmithing, no drilling/tapping, and no permanent alterations to the rifle. Rear sight mounts using the factory-provided holes for a scope base. All-steel front sight assembly has a standard detent-locking M16 post surrounded by protective ears that guard it from damage and misalignment. User may substitute any aftermarket post that replaces the standard A2. TSR100 set’s rear sight is adjustable for windage and features close-range and long-range flip-up apertures similar to the M16A2 sight. Fo Mfg: Tech Sights, Llc. SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90" (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94" (24mm) tall. Sold as front/rear sight sets. Includes mounting screws.

more >>
Brownells
$69.99 See It
Hd™ Tritium Night Sight Sets For Glock® - Large Frame Hd Yellow Sights For Glock®

The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. The HD Night Sights are designed to shine—even in the most demanding conditions. Green tritium lamps are warranted for 12 years from date of m Mfg: Trijicon Specs: Green tritium lamps are warranted for 12 years from date of manufacture. The CA128O HD Night Sights fit the 1911 Novak Dovetail Cut Models. The fronts are .330” x 65 degree dovetail. The rears (Fixed LoMount Carry) are .495” x 65 degree dovetails

more >>
Brownells
$141.95 See It
Contour Barrel Mounted Front Sights - 3/32'''' Barrel Mounted Front Sight, 50-W, Gold, .500'''' Ht

Precision-made sights for rifles, both with and without ramp bases. The blade is gracefully contoured, sloping toward the front. Made of steel and nicely blued to look good on any gun. The BARREL MOUNTED FRONT SIGHT has rounded base sides for guns with the front sight dovetail cut directly into the barrel. “W� sights have a 17/32'''' (13.5mm) wide base. Barrel front sights are available with three beads, Pope’s Island Gold, flat faced gold available in 1/16'''' (1.6mm) or 3/32'''' (2.4mm) diameter. Ivory, flat faced white polymer in 1/16'''' (1.6mm) or 3/32'''' (2.4mm) diameter. BARREL MOUNTED - 17/32'''' wide base. View Chart To Determine Overall Sight/Ramp HeightsView Sight Sel Mfg: Marble Arms SPECS: Steel, blue, polished finish. .620'''' (15mm) long.ORDERING: Select the sight height required using the Marbles and/or Williams charts and determine which Sight Style, Bead Type and Width is needed from the info above. Using the chart beside this copy, find the correct Marbles Sight and

more >>
Brownells
$11.99 See It
S&W Overmolded Handgun Front Sights - S&W Front Sight, Green

Replacement front sights work in conjunction with factory rear sights to give you fast sight acquisition in most light conditions. Machined steel body uses overmolded technology to completely cover and protect the light gathering, polymer LightPipe with an extra layer of clear polymer. Gunsmith fitting recommended. Fits most Smith & Wesson models with 2.5 inch or longer barrel and adjustable rear sight. installed sight height is .269 inches. except classic series and Performance Center guns. Fits models with pinned front sight. Mfg: Hiviz SPECS: Steel, black, matte finish. .893" (22.7mm) long.

more >>
Brownells
$34.99 See It
Ruger 10/22 Gi-Style Aperture Sights - Tsr100 10/22 Sight Set

Replacement sight sets give your 10/22 a longer sight radius for improved accuracy potential, plus the same sight picture as an AR-15/M16 with military-issue sights. Installation requires no gunsmithing, no drilling/tapping, and no permanent alterations to the rifle. Rear sight mounts using the factory-provided holes for a scope base. All-steel front sight assembly has a standard detent-locking M16 post surrounded by protective ears that guard it from damage and misalignment. User may substitute any aftermarket post that replaces the standard A2. TSR100 set’s rear sight is adjustable for windage and features close-range and long-range flip-up apertures similar to the M16A2 sight. Fo Mfg: Tech Sights, Llc. SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90" (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94" (24mm) tall. Sold as front/rear sight sets. Includes mounting screws.

more >>
Brownells
$59.99 See It
Contour Glow Sights - Barrel Mounted Glow Sight, 50-W, Orange, .500'''' Ht

Precision-made sights for rifles, both with and without ramp bases. The blade is gracefully contoured, sloping toward the front. Made of steel and nicely blued to look good on any gun. GLOW SIGHTS: Two colors - Orange or Green .060'''' dia. optic rod. RAMP MOUNTED - .340 wide base. BARREL MOUNTED - 17/32'''' wide base.View Chart To Determine Overall Sight/Ramp HeightsView Sight Selection Chart Mfg: Marble Arms SPECS: Steel, blue, polished finish. .620'''' (15mm) long.ORDERING: Select the sight height required using the Marbles and/or Williams charts and determine which Sight Style, Bead Type and Width is needed from the info above. Using the chart beside this copy, find the correct Marbles Sight and

more >>
Brownells
$15.99 See It
Hd™ Tritium Night Sight Sets For Glock® - Hd Night Sights, Orange For Glock®

The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. The HD Night Sights are designed to shine—even in the most demanding conditions. Green tritium lamps are warranted for 12 years from date of m Mfg: Trijicon Specs: Green tritium lamps are warranted for 12 years from date of manufacture. The CA128O HD Night Sights fit the 1911 Novak Dovetail Cut Models. The fronts are .330” x 65 degree dovetail. The rears (Fixed LoMount Carry) are .495” x 65 degree dovetails

more >>
Brownells
$133.45 See It
Hd™ Tritium Night Sight Sets For Glock® - Hd Night Sights, Yellow For Glock®

The HD Night Sights were specifically created to address the needs of tactical shooters. The three dot green tritium night sight set’s front sight features a taller blade and an aiming point ringed in photoluminescent paint while the rear sight is outlined in black and features a wider U-shaped notch. This unique configuration increases visibility and quickens front sight acquisition—even in transitional lighting. Additionally, the front surface of the rear sight is steeply hooked to assist in emergency one-handed slide operation. The HD Night Sights are designed to shine—even in the most demanding conditions. Green tritium lamps are warranted for 12 years from date of m Mfg: Trijicon Specs: Green tritium lamps are warranted for 12 years from date of manufacture. The CA128O HD Night Sights fit the 1911 Novak Dovetail Cut Models. The fronts are .330” x 65 degree dovetail. The rears (Fixed LoMount Carry) are .495” x 65 degree dovetails

more >>
Brownells
$133.45 See It
Search within results
  • Find by Price
    • $ to $