1 to 10 of  10 products for micro usb to usb data cable fits kyoceraqualcomm dura xt e4277 sprint red

No exact matches found for micro usb to usb data cable fits kyoceraqualcomm dura xt e4277 sprint red

10 similar items found

3403WW / 180-10646-00 micro-USB Charge & Data Sync Cable

"Genuine Palm data cable, connects your cell phone to a computers USB port to transfer data - photos, videos, MP3s, contacts etc. - to and from the phone. Also works as a USB charging cable.This is a universally compatible data cable, and although it...

more >>
eSureBuy.com
$9.95 See It
Samsung APCBU10BBE Usb Data Transfer Cable Adapter

Connector on First End: 1 x 4-pin Type A Male USB - Connector on Second End: 1 x Male Micro USB - Cable Type: USB

more >>
eSureBuy.com
$6.95 See It
Nokia CA-101 Usb Sync & Charge Cable

Charge Cable - USB: USB - Input Voltage: 5 V DC

more >>
eSureBuy.com
$9.95 See It
Micro-USB Data Cable Original SKN6238A

"The Motorola Replacement Micro-USB data cable allows the user to access their data, the Internet and e-mail on the go. Data cable only. Software not included. Part Numbers: SKN6238A / SKN6238 The Motorola Replacement Micro-USB Data Cable, manufactured...

more >>
eSureBuy.com
$9.95 See It
SGDY0014301 Micro-USB Data Cable (2.0)

"LG SGDY0014301, SGDY0013701 Micro USB data cable allows you to connect your cell phone to your PC computer and transfer data files while charging your cell phone. Organize digital files (for example music, images, and contacts) on your PC, then...

more >>
eSureBuy.com
$9.95 See It
Micro-USB Data Cable 2.0 Original SGDY0014303

"Use this original LG data cable to sync and stay connected to your phone. This original LG data cable is made and manufactured by LG so you can easily transfer that important data from and to your phone. You can use this cable to transfer your contact...

more >>
eSureBuy.com
$9.95 See It
LCD USB Mini Voltage and Current Detector USB Charger Tester Meter

Description : LCD USB Mini Voltage and Current Detector USB Charger Tester Meter Features : This test can be a USB charging current, voltage, discharge capacity, intelligent devices. It can be very easy to find digital device charging problem. Tester three dimensional size 58 * 28.5 * 15mm (without cable) about 16 cm length of the line. The only button on the tester is used to view and test data switch, the tester can store 10 groups of test data. USB output port can be connected to a data line, a discharge resistor or the like cable device comprising a data communication function, the data does not affect the data transmission line. Test specifications, voltage can not exceed 7V, current can not exceed 3.5A. Note : When the voltage is lower than 4.7V on the instrument display or higher than 5.3V, the LCD screen will flash, Does not affect the use. Here is a example for 3A : When you set electonic load at 3A model, the current will be adjusted step by step. It will cost you about 10 seconds and you can see the result changing procedure in the LCD screen. When you see the 3A result shown in LCD screen, the adjustment process is finished. You can shut off the electronic load and the parameters will be saved automatically. Specification : Input : 3-7V/50mA 3500mA Onput : 3-7V/50mA 3500mA Capacity : 0 19999mAh Communication function : Yes Parameters adjusting fuction : Yes Equipments for parameters adjustment : One electronic load, one constant current source. Parameters that you can test : Voltage of battery, current of battery, value of discharging capacitor.(Total ten parameters) Clean the data : Push the button until the parameters changed to next sets of parameters. Then release the button. Then the next sets of parameters will be started and they will start from zero. Check the parameters : Quick beat the button double times(within 0.5s) then it is checking model. The LED background will be flash.Then you can see the next set of parameters in LCD screen. Quick beat the button double times agian, you release the parameters checking model. LED backgroud be be light with flash. Over voltage or under voltage : An arrowhead will be shown in LCD screen and LED background will flash. Push the button and LED will be light without flash. It will last 30s. Turn on model : The LCD screen will show all parameters within 1s when you connet power supply by MicroUSB or male plug of USB with wire.(It is to check whether the LCD screen is good or not). Then you can see the parameters used last time(capacitor and which set of parameters).You also can see the current voltage, current and over voltage or under voltage. 1. The charger capacity test. Result : 2A discharge resistor, the voltage of 5.27 V, 2.01 A current, output 2 is ok. 1A discharge resistor, the voltage of 5.30 V, 1.02 A current, shows that the output 1A is ok. 2. The charging line quality test. Take charge line into the tester of micro USB input port, and then link capacity enough charger (recommen

more >>
Banggood
$6.16 See It
Voltaic 3.5 Watt Solar Panel

At 3.5 Watts, this waterproof, lightweight panel provides great charging performance and will help keep your devices charged up anywhere. Slide the panel in your bag or mount it nearly anywhere for a minimal, tough charging solution.Charge smartphones and other handheld electronics that charge from USB with the V15 Battery.  Includes: 1. V15 USB Battery 2. 3.5 Watt Solar Panel 3. Charging Kit for phones Charge many Android phones directly via the MicroUSB adapter.  3.5-Watt Panel Specifications (the Array and Fuse 10W have three of these panels) Dimensions: 210x113x5 mm (8.3x4.4x0.2 in) Mass: 150 g (5.3 oz) Substrate: 3 mm Aluminum/Plastic Cell Type: Monocrystalline Cell Efficiency: 18% Open Circuit Voltage: 7.0 V Peak Voltage*: 6.0 V Peak Current*: 566 mA Peak Power: 3.5 W Connector: 3.5x1.1 mm plug Mount: 4 stainless steel bolts *Panel output is computed based on cell manufacturer's data assuming 0% reduction of cell efficiency after packaging of cell strings. Electrical output tolerance +/- 10%. Under irradiance of 100 mW/cm2, absolute air mass of 1.5, at 25 °C, as per cell manufacturer's specifications. Applications and Charge Times The most common application for this kit is to charge smartphones via our V15 battery. Some, but not all, Android smartphones will charge directly from the panel via our F3511-MicroUSB adapter. This system will not charge digital cameras that require you to remove the battery for charging. Approximate Charge Time from 3.4-Watt Panel** Voltaic V15 Battery: 11 hours Smartphone via Voltaic battery: 5-7 hours Smartphone direct (when possible): 4-6 hours **For maximum power output, orient the panels towards the sun. When not angled towards the sun, output will be reduced. Dirt and scratches on the face of the panels will reduce the amount of light hitting the solar cells. Clean the panels with a damp non-abrasive cloth. Charge times are estimated based on optimal conditions and may increase in cloudy weather, high temperatures, or when panels are not angled towards the sun. How does it work? 1. Charge Voltaic Battery 2. Connect Tablet to Battery 3. Charge Tablet Charge up your battery from the sun, an AC outlet or car charger socket. Use the USB cable that came with your device or use one of our adapters to connect from the battery to your tablet. You can do this at the same time you are charging the Voltaic battery. Your tablet will charge - with some of our batteries you may need to press the Power Button to activate the USB Output.

more >>
The Warming Store
$74.99 See It
Voltaic 6 Watt Solar Panel

At 6 Watts, this waterproof, lightweight panel provides great charging performance for both smartphones and 7" tablets. Slide the panel in your bag or mount it nearly anywhere for a minimal, tough charging solution. Includes: 1. 6 Watt Solar Panel 2. V15 Battery 3. Connectors for phones and chargers Charge smartphones, tablets and other handheld electronics that charge from USB with the V15 Battery. Use the V15's "Always On" functionality for Arduinos and other devices you want to run 24 x 7.Upgrade to the V39 battery for more power storage. Connect to the V39 via the 3511 to 5521 Adapter.Charge many Android phones directly via the MicroUSB adapter.  6 Watt Panel Specifications (single panel) Dimensions: 220 x 175 x 5mm (8.7 x 6.9 x 0.2 in) Mass: 241 g (8.5 oz) Substrate: 3 mm Aluminum/Plastic Cell Type: Monocrystalline Cell Efficiency: 18% Open Circuit Voltage: 7.0 V Peak Voltage*: 6.0 V Peak Current*: 975 mA Peak Power: 5.85 W Connector: 3.5x1.1 mm plug Mount: 4 stainless steel bolts *Panel output is computed based on cell manufacturer's data assuming 0% reduction of cell efficiency after packaging of cell strings. Electrical output tolerance +/- 10%. Under irradiance of 100 mW/cm2, absolute air mass of 1.5, at 25 °C, as per cell manufacturer's specifications. pplications and Charge Times The most common application for this kit is to charge smartphones and tablets via our V15 battery. Some, but not all, Android smartphones will charge directly from the panel via our F3511-MicroUSB adapter. This system will not charge digital cameras that require you to remove the battery for charging. Approximate Charge Time from 6 Watt Panel** Voltaic V15 Battery: 5.5 hours Smartphone via Voltaic battery: 3.5 hours Smartphone direct (when possible): <3 hours **For maximum power output, orient the panels towards the sun. When not angled towards the sun, output will be reduced. Dirt and scratches on the face of the panels will reduce the amount of light hitting the solar cells. Clean the panels with a damp non-abrasive cloth. Charge times are estimated based on optimal conditions and may increase in cloudy weather, high temperatures, or when panels are not angled towards the sun. How does it work? 1. Charge Voltaic Battery 2. Connect Tablet to Battery 3. Charge Tablet Charge up your battery from the sun, an AC outlet or car charger socket. Use the USB cable that came with your device or use one of our adapters to connect from the battery to your tablet. You can do this at the same time you are charging the Voltaic battery. Your tablet will charge - with some of our batteries you may need to press the Power Button to activate the USB Output.

more >>
The Warming Store
$98.99 See It
Voltaic 2 Watt Solar Panel Kit

This lightweight, monocrystalline solar panel has the smallest footprint of any 2-Watt panel on the market and is super tough. It's waterproof, scratch resistant, and UV resistant. If you're looking for a simple and and inexpensive charging solution, this is it. Set includes: 1. 2 Watt Solar Panel 2. USB Charging Cable - Charges an 15V battery from any USB Port 3. V15 USB Battery   Includes: 2 Watt Panel + USB Charging Cable - charges V15 battery from any USB port V15 USB Battery MicroUSB Adapter - connects to Android phones (iPhones use standard USB cable) USB Output Cable - connects to phone adapters - See more at: http://www.voltaicsystems.com/2-watt-kit#sthash.qo2mCaGP.dpuf Charge smartphones and handheld electronics via the Voltaic V15 battery,Charge a GoPro camera directly from the panel via the MiniUSB adapter.  2.0-Watt Panel Specifications (many of our products have two of these panels) Dimensions: 135x112x5 mm (5.3x4.4x0.2 in) Mass: 105 g (3.7 oz) Substrate: 3 mm Aluminum/Plastic Cell Type: Monocrystalline Cell Efficiency: 18% Open Circuit Voltage: 7.0 V Peak Voltage*: 6.0 V Peak Current*: 333 mA Peak Power: 2.0 W Connector: 3.5x1.1 mm plug Mount: 4 stainless steel bolts *Panel output is computed based on cell manufacturer's data assuming 0% reduction of cell efficiency after packaging of cell strings. Electrical output tolerance +/- 10%. Under irradiance of 100 mW/cm2, absolute air mass of 1.5, at 25 °C, as per cell manufacturer's specifications. Applications and Charge Times The most common application for this kit is to charge smartphones via our V15 battery, but we recommend the 3.4 Watt kit if you want reasonably fast charging. The GoPro camera charges directly from this 2.0 Watt panel via the F3511-MiniUSB adapter.   Approximate Charge Time from 2-Watt Panel** Voltaic V15 Battery: 19 hours Smartphone via Voltaic battery: 8-10 hours Digital Camera: 8-16 hours   **For maximum power output, orient the panels towards the sun. When not angled towards the sun, output will be reduced. Dirt and scratches on the face of the panels will reduce the amount of light hitting the solar cells. Clean the panels with a damp non-abrasive cloth. Charge times are estimated based on optimal conditions and may increase in cloudy weather, high temperatures, or when panels are not angled towards the sun. How does it work? 1. Charge Voltaic Battery 2. Connect Tablet to Battery 3. Charge Tablet Charge up your battery from the sun, an AC outlet or car charger socket. Use the USB cable that came with your device or use one of our adapters to connect from the battery to your tablet. You can do this at the same time you are charging the Voltaic battery. Your tablet will charge - with some of our batteries you may need to press the Power Button to activate the USB Output.

more >>
The Warming Store
$59.99 See It
Search within results
  • Find by Price
    • $ to $