1 to 19 of  19 products for miter box

Result for "miter box"
KMS7102 Table Saw Precision Miter Gauge System

The KMS7102 Features: * Factory calibrated. perfect right out of the box * Positive stops at 0, 10, 22-1/2, 30, and 45 degrees * Brass pin allows quick changes between positive stop angles * 24" bar with 5 bar adjusters eliminates the play between the bar and the miter slot * 24" Fence section with patented Swing StopSpecifications: * Product Dimensions: 25.2 x 2.6 x 6.2 inchesIncludes: * Kreg KMS7102 Table Saw Precision Miter Gauge SystemWarranty: * 1 year Kreg warranty Features: Brass pin allows quick changes between positive stop angles

more >>
Factory Authorized Outlet
$139.00 See It
Semi-Automatic Miter Cutting Bandsaw SH-500M

This Cosen Semi-Automatic Miter Cutting Bandsaw SH-500M is a perfect all purpose bandsaw.  Cosen SH-500M Features:Structure    • Swivel sawhead mitering from 90 to 60 degrees    • Rigid and heavy-duty pivot and trunion    • Sturdy cast work table    • 460mm (18") solid discharge table with coolant returnBlade Drive    • Four blade speed with toggle clamp device    • Infinitely variable blade speed (option)Blade Guidance & Lubrication System    • Carbide blade guides with roller bearings    • Cast iron guide arm supported by heavy-duty cast iron dovetail    • Blade tension device    • Integral coolant system    • Synchronized blade brushControl & Automation    • Conveniently designed control station at waist level    • Hydraulic feed and rapid approach valve    • Electrical components located inside the control box with main lockout disconnectMaterial Feeding & Clamping    • Built in adjustable material stop    • Quick action cam lock viseSafety    • Interlock design in electrical and hydraulic system    • "Alert Orange" safety measureStandard Accessories    • Adjustable material stop    • Additional flushing hose    • Bi-metal saw blade    • Tool box, leveling pads, and an additional wire brush    • Operation & parts manualSpecificationsMiter Capacity60°Round Cutting Capacity at 90°13"Round Cutting Capacity at 45°13"Round Cutting Capacity at 30°8.7"Square Cutting Capacity at 90°13" x 13"Square Cutting Capacity at 45°12" x 12"Square Cutting Capacity at 30°8" x 8"Rectangle Cutting Capacity at 90° (H x W)13" x 19.7"Rectangle Cutting Capacity at 45° (H x W)13" x 12"Rectangle Cutting Capacity at 30° (H x W)13" x 7.9"Machine ViseFull Stroke HydraulicBlade Speed4 speed pulley drive:  75, 117, 166, 247fpmBlade Size1" x 13',7" x .035"Blade TensionManualBlade CleaningPowered wire brushBlade GuidesCarbideSaw Blade Motor2HPHydraulic Motor1/2HPCoolant Motor1/8HPPower230V, 3PHWeight2,178Shipping Dimensions89" x 47" x 67"Bed Height28.37" 

more >>
Elite Metal Tools
$9,995.00 See It
7 in. x 10-1/2 in. GearHead Miter Band Saw 413452 HVBS-710SG

7 in. x 10-1/2 in. GearHead Miter Band Saw - 413452. Quick-Lock Vise. 3/4 in. Bi-Metal Blade 5/8 TPI. Coolant System. Adjustable Material Stop. Chip Brush. Swivel head for both horizontal and vertical miter cutting. Gear box for ease of changing speeds. UL listed motor. Heavy cast-iron bow and head. Hardened and ground worm gears. Upgraded roller cabinet with 8 in. wheels and built in chip tray. Auto shut-off after cut

more >>
CPO Outlets
$2,052.00 See It
KMS7101 Table Saw Precision Miter Gauge

The KMS7101 Features: * Factory calibrated. perfect right out of the box * Positive stops at 0, 10, 22-1/2, 30, and 45 degrees * Brass pin allows quick changes between positive stop angles * 24" bar that is 3/8" tall x 3/4" wide has 5 bar adjusters eliminates the play between the bar and the miter slotSpecifications: * Product Dimensions: 25.2 x 2.6 x 6.2 inchesIncludes: * Kreg KMS7101 Table Saw Precision Miter GaugeWarranty: * 1 year Kreg warranty Features: Brass pin allows quick changes between positive stop angles

more >>
Factory Authorized Outlet
$99.99 See It
Semi-Automatic Miter Cutting Bandsaw SH-650M

Cosen SH-650M Machine FeaturesStructure    • Swivel sawhead mitering from 90 to 60 degrees    • Rigid and heavy-duty pivot and trunion    • Sturdy cast work table    • 24.5" solid discharge table with coolant returnBlade Drive    • Variable speeds from 80 fpm thru 350 fpm    • Infinitely variable blade speed (option)Blade Guidance & Lubrication System    • Carbide blade guides with roller bearings    • Two addtional bearings to support blade from the top    • Cast iron guide arm supported by heavy-duty cast iron dovetail    • Automatic hydraulic blade tensioning device    • Integral coolant system    • Synchronized blade brushControl & Automation    • Precision feed pressure & feed rate dual valve system    • Conveniently designed control station    • Electrical components located inside the control box with main lockout disconnect    • Work height selector    • Industrial rated hydraulic componentsMaterial Feeding & Clamping    • 24.5" solid discharge table with coolant return    • 36" infeed roller table    • Ful stroke machine visesSafety    • Breakage breakage detector    • Motor start interlock    • Orange alert safety designStandard Accessories    • Built-in adjustable material stop    • Adjustable work light    • Additional flushing hose    • Bi-metal saw blade    • Tool box, leveling pads, and an additional wire brush    • Operation & parts manualDesign and specifications are subject to change without notice and obligation.AngleMax. CapacityRound420 mm (16.5")400 mm (16")250 mm (10")Rectangular(H x W)380 x 650 mm(15" x 25.6")400 x 400 mm (16" x 16")400 x 250 mm (16" x 10")Saw BladeSpeed20-100 m/min (66-330 fpm)Size (LxWxT)5300L x 34W x 1.1Tmm (209" x 1.3" x 0.042")TensionHydraulicMotor OutputSaw Blade5 HP (3.75 KW)Hydraulic1 HP (0.75 KW)Coolant pump1/8 HP (0.09 KW)Tank CapacityHydraulic45 L (11.7 gal)Coolant60 L (15.6 gal)Work Bed Height750 mm (29.5")Net Weight1200 kgs (2640 lbs)Gross Weight1500 kgs (3300 lbs)Floor Space(LxWxH)2300 x 2900 x 2500...

more >>
Elite Metal Tools
$25,795.00 See It
Semi-Automatic Miter Cutting Bandsaw SH700DM

SH-700M Machine FeaturesStructure    • Rigid, oversized round columns precision ground to ensure smooth and consistent feed rate    • 3.5 degree blade cant for longer blade life (7.5 degree available)    • 45 degree backward swivel with automatic angle lock-inBlade Drive    • Specially designed gearbox for smooth and powerful cutting    • Heavy duty inverter blade drive systemBlade Guidance & Lubrication System    • Carbide blade guides    • Two additional guide bearings for extra support of the blade    • Automatic hydraulic blade tensioning device    • Integral coolant system    • Synchronized power driven blade brushControl & Automation    • Independent control station    • Infinitely variable blade speed control    • Precision feed pressure & feed rate dual valve system    • "Last cut" or "keep on" selector switch    • Work height selectorMaterial Feeding & Clamping    • Extremely heavy-duty cast iron machines vises ensuring tight clamping    •  2 sets of full stroke cylinder vises    • Shadow light projection for precise length measurement    • Hydraulically powered lifting roller for easy material positioningSafety    • Proximity switch for sensing blade slippage or breakage    • Electrical and hydraulic safety interlock    • Conduits protection measure    • "Alert Orange" safety measureStandard Accessories    • Blade "clip" device for easy blade change    • Bi-metal saw blade    • Tool box, leveling pads, and an additional wire brush    • Operation & parts manualAngleMax. CapacityRound500 mm (19.7")350 mm (13.8")200 mm (7.9")Rectangular(H x W)400 x 700 mm(15.7" x 27.6")470 x 350 mm (18.5" x 13.8")500 x 200 mm (19.7" x 7.9")Saw BladeSpeed25-95 m/min (82-312 fpm)Size (LxWxT)5450L x 41W x 1.3Tmm (214.5" x 1.6" x 0.050")TensionHydraulicMotor OutputSaw Blade7.5 HP (5.6 KW)Hydraulic1 HP (0.75 KW)Coolant pump1/4 HP (0.18 KW)Tank CapacityHydraulic35 L (9.1 gal)Coolant50 L (13 gal)Work Bed Height700 mm (27.5")Net Weight3000 kgs (6600 lbs)Gross Weight3400 kgs (7480 lbs)Floor Space(LxWxH)1750 x 2880 x 2260 mm(69" x 113.5" x 89")Shipping Space(LxWxH)3200 x 2260 x 2235 mm(126" x 89" x 88") 

more >>
Elite Metal Tools
$32,595.00 See It
7 in. x 10-1/2 in. GearHead Miter Band Saw 413452 HVBS-710SG

7 in. x 10-1/2 in. GearHead Miter Band Saw - 413452. Quick-Lock Vise. 3/4 in. Bi-Metal Blade 5/8 TPI. Coolant System. Adjustable Material Stop. Chip Brush. Swivel head for both horizontal and vertical miter cutting. Gear box for ease of changing speeds. UL listed motor. Heavy cast-iron bow and head. Hardened and ground worm gears. Upgraded roller cabinet with 8 in. wheels and built in chip tray. Auto shut-off after cut

more >>
Tyler Tool
$2,052.00 See It
Grip Professional Hacksaws - 4-Piece Set, Model 42025

Grip offers an ideal hacksaw set for all cutting jobs. 15in. hacksaw has a heavy-duty steel frame for cutting pipe and other large material. 9in. mini hacksaw and miter box are just the right size for small mitering projects. You also get an 11in. saw...

more >>
Northern Tool
$11.99 See It
Baileigh Column Cold Saw CS-C385SA

The CS-C385SA vertical column cold saw is perfect for those medium duty cutting applications that a great quality cut is important.  The CS-C385SA can accept up to a 15-3/4" diameter cold saw blade that will increase the cutting capacity to a robust 4.7”, and also extends the life of the blade.The CS-C385SA from Baileigh Industrial can miter 45 degrees left or right in seconds. This is a semi-automatic production saw that comes with a metered stop rod for repeatable cuts. Operation of a semi-automatic saw is very simple and saves wear and tear on the operator.  Simply press the foot pedal at and the hydraulic vice clamps the material, the blade and coolant system starts up and the upper cutting carriage starts the descent cutting through the material. When finished the coolant and blade shuts off while the upper cutting carriage returns to its home position. The heavy-duty column construction allows for quicker cutting times, perfect surface finishes without the need of secondary facing applications.Like all Baileigh Industrial cold saws, the construction of the CS-C385SA is unparalleled and consists of a steel cabinet that houses the electronics, coolant system, and industrial grade hydraulic system. On top of this cabinet is a solid cast base that houses the hydraulic vise and the upper cutting carriage which consists of an industrial grade gear box coupled to the saw blade drive system, industrial grade motor, and finally the industrial grade hydraulic down feed and return system.SpecificationsMax. Blade Diameter16" - 14" StandardOperationSemi-AutomaticHead Miter45º Left / 30º RightRound Solid at 45º2.36"Square Tube at 45º3.93" x 3.93"Round Tube at 45º4.25"Rectangle Tube at  45º3.93" x 1.96"Round Solid at 90º2.75"Rectangle Tube at 90º4.72" x 1.96"Square Tube at 90º4.33" x 4.33"Round Tube at 90º4.5"Coolant SystemYesVice StyleSingle ActionMax. Vice Opening6"Head StyleColumnArbor Size1.26"Power220V / 3-PhaseShipping Weight1,870 lbs.Shipping Dimensions58" x 33" x 88" 

more >>
Elite Metal Tools
$14,967.00 See It
Baileigh Cold Saw CS-350EU

Baileigh Industrials revolutionary new CS-350EU cold saw will change the way you think about cold saws. The CS-350EU is a unique 14” circular cold saw features a true inverter that drives the motor. This inverter allows the blade speed to be adjusted from 24 to 120 RPM. This range of RPM covers most of the cutting application that this cold saw will encounter. The CS-350EU cold saw is a powerful machine that can cut through solids, tubing, or pipe. The head has a strong motor coupled to a direct drive gear box that allows the blade to cut through the material chatter free which increases blade life. The CS-350EU cold saw has a thick cast iron base making it very rigid that is mounted on a steel base. The Baileigh Industrial CS-350EU circular cold saw can miter 45 degrees to the left and 45 degrees to the right with the ability to slot perpendicular to the material as well. The vise has a taper lock system that helps increase production when a lot of cutting is required. The vise clamps on both sides of the cut increasing blade life. The vise jaws are serrated for maximum hold. Like all other Baileigh circular cold saws, the CS-350EU comes with a powerful coolant pump that cools the blade and washes chips away. This is the perfect machine for any fabrication shop and best yet it requires just 220V, single phase, 60 hertz power. This machine offers great value for a small price. The CS-350EU is almost always in stock for fast deliveries.FeaturesMax. Blade Diameter14"OperationManualHead Miter90º Slotting, 45º Left/RightRound Solid at 45º3"Square Tube at 45º3.5"x3.5"Round Tube at 45º4"Rectangle Tube at 45º3.5" x 2.8"Round Solid at 90º3.5"Rectangle Tube at 90º6.3" x 3.5"Square Tube at 90º4"x4"Round Tube at 90º4.7"Coolant SystemYesVise StyleSingle Action with Cam lockMax. Vice Opening4.7"Head StylePivotArbor Size1.26"Motor3HPCapacity Round 45º4"Blade Speed24-120 rpmPower220V, 1PHShipping Weight550IbsShipping Dimensions60"x44"x48" 

more >>
Elite Metal Tools
$4,025.00 See It
Baileigh Cold Saw - CS-315EU

The CS-315EU is the flagship of our EU line of cold saws.  The CS-315EU is designed to give any shop years of service without breaking the bank.  The CS-315EU cold sawis a powerful machine that can cut through solids, tubing, or pipe. The head has a strong motor coupled to a direct drive gear box that allows the blade to cut through the material chatter free which increases blade life. The saw has a thick cast iron base making it very rigid.  The CS-315EU includes a heavy duty steel base that is set at the optimal cutting height.This is the perfect machine for small to medium fabricating shops and best yet it requires just 220V, 60Hz, 1-Phase power.  The CS-315EU spins at 52 rpm. Perfect for mild steel cutting, but it will also handle other material with the proper blade.  Like all other Baileigh circular cold saws, it comes with a powerful integrated coolant pump that cools the blade and washes chips away.The CS-315EU can miter 45 degrees to the left and 45 degrees to the right. The vise has a taper lock system that helps increase production when a lot of cutting is required. The vise on the CS-315EU cold saw clamps on both sides of the cut increasing blade life. The vise jaws are serrated for maximum hold.SpecificationsMax. Blade Diameter12.5"OperationManualHead Miter45º Left & RightRound Solid at 45º2"Square Tube at 45º3.2" x 3.2"Round Tube at 45º4"Rectangle Tube at 45º3.25" x 2.75"Round Solid at 90º2"Rectangle Tube at 90º4.25" x 2.75"Square Tube at 90º3.2" x 3.2"Round Tube at 90º4"Coolant SystemYesVice StyleSingle Action with Cam lockMax. Vice Opening4.72"Head StylePivotArbor Size1.26"Motor2.5HPBlade Speed52 rpmPower 220V 1, PHWeight500IbsShipping Dimensions40" x 40" x 72" 

more >>
Elite Metal Tools
$2,367.00 See It
7-1/4 in. 15 Amp Circular Saw with Brake C7BMR

7-1/4 in. 15 Amp Circular Saw with Brake - C7BMR. Box Wrench - 940543. 24-Tooth Carbide Tipped Blade - 725213. Hefty motor with 1,710 Watt output that produces a no-load speed of 5,800 RPM for greater cutting efficiency through tough materials. Internal Double Insulation (IDI) technology enables the aluminum housing to be intertwined with an injection molded inner nylon core to combine the durability of an all metal body tool with the double insulation advantages of a tool with plastic housing. Tool bearing sits in die-cast aluminum, instead of plastic, to improve tool reliability and greatly extend tool life. Electric brake stops blade rotation within seconds preventing unintended cuts. Levers are made from die-cast aluminum alloy for durability. Cutting and bevel levers are well-placed and move smoothly during adjustments. Bevel capacity ranges up to 55 degrees with a positive stop at 45 degrees. Extra cut capacity to 55 degrees is ideal for framing and cutting compound miter angles for more flexibility. Heavy-duty aluminum base offers easy to read front and side scales for accurate measurements. Easily accessible carbon brush allows for quick and easy brush changes. At a lightweight 10.5 lbs., this saw is easy to maneuver and transport. Soft grip main and sub handles are ergonomically designed to increase grip and improve comfort. AC/DC switch is operable on any power supply including a generator for optimal convenience

more >>
Tyler Tool
$124.99 See It
10-inch Cold Saw WFCS250

This 10-inch Blade Cold Saw operates on 220VAC Single Phase at 36 RPM allowing for clean cuts through materials. It features a cast iron reduction gear box, built in coolant system, miter left or right, adjustable hardened vise jaws, guarded blade,...

more >>
The Eastwood Company
$1,795.99 See It
14 in. Vertical Variable Speed Band Saw 1Ph 414502 J-8201VS

J-8201VS, 14 in. Vertical Variable Speed Band Saw 1Ph - 414502. Cast iron frame. Solid, one-piece steel base for extra stability. Conveniently located on/off switch. Variable speed drive system (8201VS & 8203VS). Exclusive gear box design allows wood/metal model saws to be used for a wider variety of metal, wood, non-ferrous metal plastic cutting applications. Miter gauge. Dust chute. Saw blades (wood & metal). Adjustable table. These saws are specifically designed to effectively cut a variety of materials including wood, plastic, Bakelite, composites, ferrous and non-ferrous metals. Capable of cutting and re-sawing. Can cut delicate curves in both thick and thin stock

more >>
CPO Outlets
$1,599.00 See It
315mm Single Phase Ferrous Manual Cold Saw 414229 CS-315-1

CS-315-1 315mm Single Phase Ferrous Manual Cold Saw - 414229. 1.3 Gallon Coolant Tank. Flood Style Coolant System. 30 in. Adjustable Length Material Stop. Casted Blade Cover. Safety Guards. Miter cutting head is mounted to a cast iron base which swivels and locks into any position within a 135 degree range. Self-centering vise includes an anti-burr attachment and a stop assembly for repetitive cuts of the same length. Control panel contains independent on/off buttons with indicator light, a mushroom style red emergency off switch, coolant flow switch, and a switch for speed selection. Flood coolant system rests inside the base and dispenses directly into the saw blade through a tubing from the coolant pump. Hardened and ground worm and wheel gear box

more >>
CPO Outlets
$2,340.00 See It
14 in. 115V 1Ph Vertical Metal/Wood Band Saw 414500 J-8201K

J-8201K, 14 in. 115V 1Ph Vertical Metal/Wood Band Saw - 414500. Heavy-duty cast iron frame provides high durabily and damage resistance. Solid one-piece steel base for improved stability. Exclusive gear box design allows for a wider use in cutting materials from wood to metal and more. Integrated dust chute provides extra debris removal when connected to dust extraction system. Integrated miter gauge for accurate, precise cuts. Compatible with both wood and metal saw blades. Adjustable cutting table allows for ideal cutting position

more >>
CPO Outlets
$1,199.00 See It
14 in. Vertical Variable Speed Band Saw 1Ph 414502 J-8201VS

J-8201VS, 14 in. Vertical Variable Speed Band Saw 1Ph - 414502. Cast iron frame. Solid, one-piece steel base for extra stability. Conveniently located on/off switch. Variable speed drive system (8201VS & 8203VS). Exclusive gear box design allows wood/metal model saws to be used for a wider variety of metal, wood, non-ferrous metal plastic cutting applications. Miter gauge. Dust chute. Saw blades (wood & metal). Adjustable table. These saws are specifically designed to effectively cut a variety of materials including wood, plastic, Bakelite, composites, ferrous and non-ferrous metals. Capable of cutting and re-sawing. Can cut delicate curves in both thick and thin stock

more >>
Tyler Tool
$1,599.00 See It
10 in. Portable Contractor Table Saw with Table Saw Stand 2705X1

10 in. Contractor Table Saw w/ Table Saw Stand - 2705X1. Carbide Tipped Blade - A-94459. Tool-less Blade Guard System. Rip Fence - 122740-1. Angled Miter Gauge - 122735-4. Wrench *5 - 783203-8. Wrench *19 - 781038-1. Socket Wrench *13-22 - 782024-5. Portable Table Saw Stand - 194093-8. Right extension table allows for greater cutting capacity with the capability to rip 4X8 sheets of plywood. Two pole slide system for raising and lowering blade for the most efficient and smoothest adjustment of the blade depth. Aluminum die cast, precision machined table top remains flat and true for out of the box accuracy. Large cutting capacity (3-5/8 in. at 90 degrees and 2-1/2 in. at 45 degrees) can rip 4x material in one pass, can use up to a 13/16 in. dado blade. Large on and off switch and easy to read scale for fast adjustments. Complete storage capacity to hold most commonly used accessories including saw blade, power supply cord, miter gauge, rip fence, push stick, wrench, safety guard and dado blade. 3/8 in. x 3/4 in. T-slot miter gauge grooves accepts commercial accessories with T formed shanks for versatile cutting. Saw blade enclosed underneath the table to protect the blade during transport. Powerful 15 Amp motor delivers 4,800 RPM and has electric brake for maximum productivity. Dead-on cam-locking rip fence and bevel locking handle for fast and easy adjustments. The new and improved tool-less blade guard system meets all new UL requirements and offers greater protection while cutting

more >>
Tyler Tool
$869.99 See It
14 in. 115V 1Ph Vertical Metal/Wood Band Saw 414500 J-8201K

J-8201K, 14 in. 115V 1Ph Vertical Metal/Wood Band Saw - 414500. Heavy-duty cast iron frame provides high durabily and damage resistance. Solid one-piece steel base for improved stability. Exclusive gear box design allows for a wider use in cutting materials from wood to metal and more. Integrated dust chute provides extra debris removal when connected to dust extraction system. Integrated miter gauge for accurate, precise cuts. Compatible with both wood and metal saw blades. Adjustable cutting table allows for ideal cutting position

more >>
Tyler Tool
$1,199.00 See It
Search within results