1 to 20 of  100 products for morrisproducts mlc814 copper short barrel one hole compression lugs in red 94012

No exact matches found for morrisproducts mlc814 copper short barrel one hole compression lugs in red 94012

100 similar items found

.22 Caliber Rimfire Barrel Liners - Brownells/Redman 1-20 Twist 25'''' Liner, .22 Short Rimfire

There are untold thousands of rimfire .22’s over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Plus, a lot of shooters want to convert to one of the .17 rimfires. Brownells .22 Barrel Liners, made by Redman Mfg., are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. With the Brownell system, barrel liner installation is not diffic Mfg: Redmans SPECS: 4140 steel. .223" (5.6mm) groove diameter for .22 Short and Long Rifle (LR), 1-16 twist (LR) or 1-20 twist for Short. 5/16" (7.9mm) O.D., 25" Liner - 26-3/8" (67cm) overall, 25" (63.5cm) usable length. 32" Liner - 32" (81.2cm) overall, 30-5/8" (77.7cm)

more >>
Brownells
$34.99 See It
Waimea Short - Women's Indigo Beach/Indigo, 6

You finally made it into the barrel of a wave on your surfboard, and you're thanking your lucky stars you have your Carve Designs Women's Waimea Shorts on. At any point that wave could crash down on you and swallow you up, and you wouldn't feel quite so comfortable in just a skimpy bikini bottom. The Waimea offers worry-free coverage, along with an SPF of 50 and a water-repelling DWR finish--all ideal for long days spent in turbulent waters. The Waimea's polyester microfiber fabric dries quickly once you're back to shore, and the back pocket includes a drainage hole to keep water from pooling up inside. When you're out of the water for the day, you won't have to break to change clothes before wandering to the nearest beachfront watering hole to rehydrate.

more >>
Backcountry.com
$26.98 See It
Remington 700 Short Action Vertical Grip Tactical Rifle Stocks - Short Action Vertical Grip Tactical Stock, Sand

Designed for police departments and law enforcement agencies. Stock is instantly and fully adjustable (no tools required) for length of pull and drop at comb. Plus, the handfilling, vertical grip and adjustable cheekpiece are ambidextrous for both right- and left-handed shooters. Machined aluminum bedding block runs from near the front swivel mount all the way back, into the pistol grip so no additional bedding is needed for superi­or accuracy. Kevlar/graphite-reinforced fiberglass provides stability and strength for a zero that never shifts due to changes in temperature or humidity. Barrel channel is relieved for straight contour, bull-style, heavy barrels up to 1.250'''' in ­diameter. Availab Mfg: H-S Precision SPECS: Oversize, target-style stock. Flat Black (B) or Sand baked-on, non-­reflective, textured finish. Adjustable from 12½'''' (31cm) to 14½'''' (36cm) lop, 0'''' to +2'''' (5cm) rise at comb. 4 lb. 3 oz. (1.9 kg) wt. Fits Remington 700 BDL Short (right hand) and Long actions only.

more >>
Brownells
$669.99 See It
Remington 700 Short Action Sport-Tact Chassis - Rem 700 Sport-Tact Chassis Sa Black

The Accurate-Mag Sport-Tact Remington 700 Chassis is a complete stock system, ready for installation.  Existing barreled action can be removed from current stocks, and simply bolted into the Sport-Tact Chassis.  Included on the chassis is an adjustable stock, which has a variable LOP, from 13 to 15.75".  The cheek-piece can also be adjusted fore & aft, as well as up & down.  Front handguard includesside and bottom picatinny rails, while providing plenty of room to free-float a barrel.  Chassis is machined from aluminum, allowing for rigid mounting of your action.  AR15 style pistol grip is included.  Short Action Chassis includes 5rd 308 mag Mfg: Accurate Mag SPECS: Fits - Short Action Remington 700 rifles.  Includes 5rd magazines (SA 308 Mag).  Construction - Aluminum.  Finish - Matte black anodizing.  Includes AR15 grip.  Adjustable stock, for LOP and cheekweld.

more >>
Brownells
$820.00 See It
Bullseye Rear Sight - Short Adj. Bullseye Sight

Barrel-mounted, dovetail Bullseye sight gets you on target fast with perfect alignment for improved accuracy. Steel, double-ring peep design ensures consistent sight alignment and helps improve shooting form. The moment the rear sight is misaligned, the front sight drifts out of the center ring, telling the shooter to re-align. Replaces standard 3/8'''' dovetail rear sights on many rifles. For use with bead-type or traditional blade front sights. Adjustable models are available with a short or long base and six-position step elevator that’s adjustable in .030'''' increments for precise elevation settings. Fixed model features the same Bullseye peep design but without the extended base and is Mfg: Marble Arms SPECS: Steel, blue, polished finish. Fits nominal 3/8'''' (9.5mm) dovetail. Outside Ring O.D. - 9/16'''' (1.4cm). Inside Ring I.D. - .15� (3.8mm). Adjustable - .338�-.535� (8.6mm - 13.5mm) elevation adjustment in six, .030� (.76mm) increments. OAL from rear of dovetail - Long: 2½� (6.3cm). Sh

more >>
Brownells
$16.99 See It
Remington 700 Short Action Vertical Grip Long Range Stocks - Vertical Grip Long Range Stock, Sand

Strong, stable, Kevlar™/graphite-reinforced, fiberglass shell has a machined aluminum bedding block that extends from the front swivel mount into the pistol grip. Provides for a zero that never shifts due to changes in temperature or humidity; gives superi­or accuracy with no additional bedding. The handfilling, vertical grip allows a natural, relaxed wrist angle for excellent trigger control when firing from prone, off the bench or bipod. Slight taper along bottom of butt rides easily on a rear sand bag. Easy-to-grasp, wide, flat forend is stable on bags; barrel channel is relieved for straight contour, heavy barrels up to 1.250'''' in ­diameter. Available in Black or Sand. Mfg: H-S Precision SPECS: Fiberglass reinforced with Kevlar and graphite, Flat Black (B) or Sand, baked-on, non-­reflective, textured finish. 13½'''' (34.3cm) l.o.p., 3 lb. (1.4 kg) wt. Fits Remington 700 BDL short action only.

more >>
Brownells
$399.99 See It
Remington 700 Barrel - Barrel, .204/1-9 Twist, Contour #4, Cm

The fastest, most convenient method available to any gunsmith for rebarreling and accurizing the fine Remington 700 action. Now you can provide your customers with the increased accuracy and superior performance that only a custom, match-quality barrel can deliver without time-consuming and costly lathe work. Brownells match-grade barrels are pre-threaded and short-chambered for ease of installation. Plus, the bolt body counterbore is fully cut. Groove tolerances are uniform to within .0003" end-to-end and air-gauged to ensure conformity. After installation, use a hand-turned finish reamer to deepen chamber until correct head space is reached, (correct Reamer and Headspace Gauges req Mfg: Shilen SPECS: 4140 chrome moly or 416 stainless steel, stress relieved. 26" (66cm) long. Contour #4 for .204 Ruger barrel is 1.220” (3.1cm) tapering to at the breech to .660” (16.7mm) at the muzzle. Contour #5.5 is a very close match to Remington factory varmint barrel and requires only

more >>
Brownells
$389.99 See It
Remington 700 Factory Contour Pre-Threaded Barrel - .22-250 1-14 Twist Varmint Contour Ss Barrel

Made for Brownells by Shilen to match the factory contour. Upgrade the performance and accuracy of Remington 700 rifles without costly stock work. Match-grade, short-chambered barrels have the correct contour to drop into Remington factory or aftermarket stocks with little-to-no barrel channel modifications. Install with your factory recoil lug. Muzzle is cut at 90° to the bore and ready for crowning. After installation, use a hand-turned, finish reamer to deepen chamber until correct headspace is reached. (Correct headspace gauges and reamer required.) Mfg: Shilen SPECS: 4140 Chrome Moly steel, in-the-white or 416 Stainless Steel, stress relieved.

more >>
Brownells
$377.99 See It
Remington 700 Factory Contour Pre-Threaded Barrel - .223 Rem. 1-9 Twist Varmint Contour Cm Barrel

Made for Brownells by Shilen to match the factory contour. Upgrade the performance and accuracy of Remington 700 rifles without costly stock work. Match-grade, short-chambered barrels have the correct contour to drop into Remington factory or aftermarket stocks with little-to-no barrel channel modifications. Install with your factory recoil lug. Muzzle is cut at 90° to the bore and ready for crowning. After installation, use a hand-turned, finish reamer to deepen chamber until correct headspace is reached. (Correct headspace gauges and reamer required.) Mfg: Shilen SPECS: 4140 Chrome Moly steel, in-the-white or 416 Stainless Steel, stress relieved.

more >>
Brownells
$284.99 See It
M1 30-06 Barrel - M1 Garand Barrel

Standard G.I. contour barrels are machined from 4150 chrome-moly steel and fully threaded, with button-cut 4-groove rifling and a durable, Parkerized exterior finish. M1 Garand barrel has a 1-10" twist rate. Comes short-chambered—after installation, complete the chamber with a finish reamer until correct headspace is achieved. Mfg: Fulton Armory SPECS: 4150 chrome-moly steel, Parkerized, matte black finish. Not chrome lined. M1 Garand - 1-10” twist rate. 24” long. .30-06.

more >>
Brownells
$289.99 See It
Remington 700 Barrel - Barrel, .308 Win/1-10 Twist, Contour #7, Ss

The fastest, most convenient method available to any gunsmith for rebarreling and accurizing the fine Remington 700 action. Now you can provide your customers with the increased accuracy and superior performance that only a custom, match-quality barrel can deliver without time-consuming and costly lathe work. Brownells match-grade barrels are pre-threaded and short-chambered for ease of installation. Plus, the bolt body counterbore is fully cut. Groove tolerances are uniform to within .0003" end-to-end and air-gauged to ensure conformity. After installation, use a hand-turned finish reamer to deepen chamber until correct head space is reached, (correct Reamer and Headspace Gauges req Mfg: Shilen SPECS: 4140 chrome moly or 416 stainless steel, stress relieved. 26" (66cm) long. Contour #4 for .204 Ruger barrel is 1.220” (3.1cm) tapering to at the breech to .660” (16.7mm) at the muzzle. Contour #5.5 is a very close match to Remington factory varmint barrel and requires only

more >>
Brownells
$377.99 See It
Remington 700 Short Action Vertical Grip Tactical Rifle Stocks - Short Action Vertical Grip Tactical Stock, Flat Black

Designed for police departments and law enforcement agencies. Stock is instantly and fully adjustable (no tools required) for length of pull and drop at comb. Plus, the handfilling, vertical grip and adjustable cheekpiece are ambidextrous for both right- and left-handed shooters. Machined aluminum bedding block runs from near the front swivel mount all the way back, into the pistol grip so no additional bedding is needed for superi­or accuracy. Kevlar/graphite-reinforced fiberglass provides stability and strength for a zero that never shifts due to changes in temperature or humidity. Barrel channel is relieved for straight contour, bull-style, heavy barrels up to 1.250'''' in ­diameter. Availab Mfg: H-S Precision SPECS: Oversize, target-style stock. Flat Black (B) or Sand baked-on, non-­reflective, textured finish. Adjustable from 12½'''' (31cm) to 14½'''' (36cm) lop, 0'''' to +2'''' (5cm) rise at comb. 4 lb. 3 oz. (1.9 kg) wt. Fits Remington 700 BDL Short (right hand) and Long actions only.

more >>
Brownells
$669.99 See It
Ruger® 10/22 Takedown Sb-X Barrel - Sb-X Barrel

The SB-X barrel provides the versatility of a short barreled rifle (SBR) without the burden of red tape paperwork. The SB-X barrel allows the addition of a suppressor without drastically increasing the overall length of your firearm. The barrel length of 12.25” would be considered an SBR if not for the shroud which brings the overall length to 16.5”. This barrel avoids cumbersome paperwork and provides a shorter, light-weight solution for those who love shooting suppressed. With the standard threaded end, attaching a suppressor is easier than tying your shoe. Includes Tactical Solutions inert suppressor. Mfg: Tactical Solutions, Llc SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Chrome-moly steel liner with 1-16" twist rifling. 16½" (42cm ) O.A.L. including shroud, 12¼" (31.1cm) bore length, .920" (2.3cm) O.D. Accepts muzzle accessories up to 1" (2.5cm) O.D. with ½&quot

more >>
Brownells
$269.99 See It
Remington 700 Factory Contour Pre-Threaded Barrel - .308 Win 1-10 Twist Varmint Contour Ss Barrel

Made for Brownells by Shilen to match the factory contour. Upgrade the performance and accuracy of Remington 700 rifles without costly stock work. Match-grade, short-chambered barrels have the correct contour to drop into Remington factory or aftermarket stocks with little-to-no barrel channel modifications. Install with your factory recoil lug. Muzzle is cut at 90° to the bore and ready for crowning. After installation, use a hand-turned, finish reamer to deepen chamber until correct headspace is reached. (Correct headspace gauges and reamer required.) Mfg: Shilen SPECS: 4140 Chrome Moly steel, in-the-white or 416 Stainless Steel, stress relieved.

more >>
Brownells
$377.99 See It
M14/M1a 308 Barrel - M14/M1a Modified Barrel, Stainless

Button-rifled replacement barrel has a heavier contour in front of the op rod guide than a standard “medium” weight barrel for added rigidity that enhances accuracy potential. Compatible with any receiver built to USGI specs, including Springfield Armory and LRB Arms receivers and is legal for high-power service rifle matches. Barrel features 5R 20 degree rifling, for superior accuracy.  Stainless steel model is short-chambered; after installation, use a hand-turned finish reamer to deepen the chamber until correct headspace is reached. Comes with a new-design op rod guide that matches the barrel contour and doesn’t contact the handguard, eliminating a pre Mfg: M-14 Parts.Com SPECS: 410 stainless steel, natural finish. 22" (55.8cm) long, 13/32" (2.78cm) largest outside diameter. 3 lbs., 4 oz. (1.47kg) wt. Rifling: 4-groove, 1-11" twist rate. Includes 4140 carbon steel op rod guide. Fits USGI-spec receivers, including Springfield Armory and LRB Arm

more >>
Brownells
$399.99 See It
Remington 700 Short Action Bdl Medalist Stock - Remington 700 Bdl Short

Classic, straight line cheekpiece with built-in cast off and cant lowers your head position, creates a tighter cheekweld and shoulder pocket to lessen the pain of felt recoil. Hand-laid fiberglass, Kevlar and epoxy composites bonded to an integral, ­aluminum bedding block ensure full receiver contact for consistent, increased accuracy, without additional bedding. Features a textured black finish, Pachmayr recoil pad and sling swivels; checkering on some models. Mfg: Bell & Carlson SPECS: Fiberglass/Kevlar composite. Black, textured finish. 13½" (34cm) l.o.p. Approx. 2 lbs. (.91kg) wt. Drop-in design may require minor fitting. Inletted for factory sporter barrel and hinged floorplate. Short Action (SA).

more >>
Brownells
$289.99 See It
Remington 700 Factory Contour Pre-Threaded Barrel - .308 Win 1-10 Twist Varmint Contour Cm Barrel

Made for Brownells by Shilen to match the factory contour. Upgrade the performance and accuracy of Remington 700 rifles without costly stock work. Match-grade, short-chambered barrels have the correct contour to drop into Remington factory or aftermarket stocks with little-to-no barrel channel modifications. Install with your factory recoil lug. Muzzle is cut at 90° to the bore and ready for crowning. After installation, use a hand-turned, finish reamer to deepen chamber until correct headspace is reached. (Correct headspace gauges and reamer required.) Mfg: Shilen SPECS: 4140 Chrome Moly steel, in-the-white or 416 Stainless Steel, stress relieved.

more >>
Brownells
$284.99 See It
.22 Caliber Rimfire Barrel Liners - Brownells/Redman 1-16 Twist 25'''' Liner, .22lr Rimfire

There are untold thousands of rimfire .22’s over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Plus, a lot of shooters want to convert to one of the .17 rimfires. Brownells .22 Barrel Liners, made by Redman Mfg., are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. With the Brownell system, barrel liner installation is not diffic Mfg: Redmans SPECS: 4140 steel. .223" (5.6mm) groove diameter for .22 Short and Long Rifle (LR), 1-16 twist (LR) or 1-20 twist for Short. 5/16" (7.9mm) O.D., 25" Liner - 26-3/8" (67cm) overall, 25" (63.5cm) usable length. 32" Liner - 32" (81.2cm) overall, 30-5/8" (77.7cm)

more >>
Brownells
$34.99 See It
Remington 700 Factory Contour Pre-Threaded Barrel - .223 Rem. 1-14 Twist Varmint Contour Ss Barrel

Made for Brownells by Shilen to match the factory contour. Upgrade the performance and accuracy of Remington 700 rifles without costly stock work. Match-grade, short-chambered barrels have the correct contour to drop into Remington factory or aftermarket stocks with little-to-no barrel channel modifications. Install with your factory recoil lug. Muzzle is cut at 90° to the bore and ready for crowning. After installation, use a hand-turned, finish reamer to deepen chamber until correct headspace is reached. (Correct headspace gauges and reamer required.) Mfg: Shilen SPECS: 4140 Chrome Moly steel, in-the-white or 416 Stainless Steel, stress relieved.

more >>
Brownells
$377.99 See It
Remington 700 Barrel - Barrel, .22-250/1-8 Twist, Contour #7, Ss

The fastest, most convenient method available to any gunsmith for rebarreling and accurizing the fine Remington 700 action. Now you can provide your customers with the increased accuracy and superior performance that only a custom, match-quality barrel can deliver without time-consuming and costly lathe work. Brownells match-grade barrels are pre-threaded and short-chambered for ease of installation. Plus, the bolt body counterbore is fully cut. Groove tolerances are uniform to within .0003" end-to-end and air-gauged to ensure conformity. After installation, use a hand-turned finish reamer to deepen chamber until correct head space is reached, (correct Reamer and Headspace Gauges req Mfg: Shilen SPECS: 4140 chrome moly or 416 stainless steel, stress relieved. 26" (66cm) long. Contour #4 for .204 Ruger barrel is 1.220” (3.1cm) tapering to at the breech to .660” (16.7mm) at the muzzle. Contour #5.5 is a very close match to Remington factory varmint barrel and requires only

more >>
Brownells
$377.99 See It
Search within results
  • Find by Price
    • $ to $