1 to 20 of  36 products for motor asy a131010101

No exact matches found for motor asy a131010101

36 similar items found

ASI 0165 | American Specialties Profile Compact White Hand Dryer

ASI 0165 - American Specialties, Inc. - Surface Mounted Sensor Hand Dryer - White Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, heavy-duty cast aluminum 7/64 inch thick, and shall have all exposed surfaces finished with acid, chip and scratch resistant epoxy enamel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$237.41 See It
ASI 0165-40 | American Specialties Profile Compact Grey Hand Dryer

ASI 0165-40 - American Specialties, Inc. - Surface Mounted Sensor Hand Dryer - Grey White hand dryer is shown. Please note this hand dryer is GREY . Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, heavy-duty cast aluminum 7/64 inch thick, and shall have all exposed surfaces finished with acid, chip and scratch resistant epoxy enamel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$265.31 See It
ASI 0184 | American Specialties Roval Steel Cover Hand Dryer, White, 277 Volt

ASI 0184 - American Specialties, Inc. - Surface Mounted Steel Cover Sensor Hand Dryer - White, 277 Volt Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, 16 gauge thick drawn steel and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel or shall be 16 gauge stainless steel with bright or satin finish per option selected. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$345.64 See It
ASI 0195 | American Specialties Roval Cast Iron White Hand Dryer, 100-240 Volt

ASI 0195 - American Specialties, Inc. - Surface Mounted Cast Iron Cover Sensor Hand Dryer - White, 100-240 Volt Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, heavy-duty cast iron 1/4 inch thick, and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$401.48 See It
ASI 0185-71 | American Specialties Roval Almond Hand Dryer, Steel Cover, 100-240 Volt

ASI 0185-71 - American Specialties, Inc. - Surface Mounted Steel Cover Sensor Hand Dryer - Almond, 100-240 Volt White hand dryer is shown. Please note this hand dryer is ALMOND . Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, 16 gauge thick drawn steel or type 304 stainless steel and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel on steel or bright or satin finish on stainless steel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$349.61 See It
ASI 0197-2 | American Specialties TURBO-Dri White Hand Dryer, 220-240 Volt

ASI 0197-2 - American Specialties, Inc. - TURBO-Dri (TM) High Speed Hand Dryer (220-240v.) - White Surface Mounted High-Speed Hand Dryer shall operate automatically from IR sensor activated by beam reflection from objects placed in sensing zone. Motor and heating element shall have internal resetting automatic thermal protection. Unit shall develop 68 CFM of heated air and shall provide drying time of less than 12 seconds. Warm air output temperature and velocity shall be adjustable by owner. Cover shall be fabricated of heavy-duty, one piece formed steel 1/16 inch thick finished on all exposed surfaces with white porcelain enamel. Fixed directional air nozzle shall be heavy-duty, rust proof and highly tamper resistant. Air intake slots shall not allow access to internal parts. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self-calibrate to provide uniform sensitivity over its entire life span. Sensitivity shall be adjustable by owner to suit mounting conditions and intended usage population. Entire unit shall be internally electrically grounded. Motor speed shall be adjustable by owner in range between maximum power and maximum efficiency. Unit shall be warranted against defects in materials or workmanship for five years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF) Purchase Semi-Recess Kit 0119 to Reduce Protrusion to less than 4"

more >>
KandJCA
$382.21 See It
ASI 0197-1 | American Specialties TURBO-Dri White Hand Dryer, 110-120 Volt

ASI 0197-1 - American Specialties, Inc. - TURBO-Dri (TM) High Speed Hand Dryer (110-120v.) - White Surface Mounted High-Speed Hand Dryer shall operate automatically from IR sensor activated by beam reflection from objects placed in sensing zone. Motor and heating element shall have internal resetting automatic thermal protection. Unit shall develop 68 CFM of heated air and shall provide drying time of less than 12 seconds. Warm air output temperature and velocity shall be adjustable by owner. Cover shall be fabricated of heavy-duty, one piece formed steel 1/16 inch thick finished on all exposed surfaces with white porcelain enamel. Fixed directional air nozzle shall be heavy-duty, rust proof and highly tamper resistant. Air intake slots shall not allow access to internal parts. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self-calibrate to provide uniform sensitivity over its entire life span. Sensitivity shall be adjustable by owner to suit mounting conditions and intended usage population. Entire unit shall be internally electrically grounded. Motor speed shall be adjustable by owner in range between maximum power and maximum efficiency. Unit shall be warranted against defects in materials or workmanship for five years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF) Purchase Semi-Recess Kit 0119 to Reduce Protrusion to less than 4"

more >>
KandJCA
$378.46 See It
ASI 0185-41 | American Specialties Roval Black Hand Dryer, Steel Cover, 100-240 Volt

ASI 0185-41 - American Specialties, Inc. - Surface Mounted Steel Cover Sensor Hand Dryer - Black, 100-240 Volt White hand dryer is shown. Please note this hand dryer is BLACK . Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, 16 gauge thick drawn steel or type 304 stainless steel and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel on steel or bright or satin finish on stainless steel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$349.61 See It
ASI 0195-40 | American Specialties Roval Cast Iron Grey Hand Dryer, 100-240 Volt

ASI 0195-40 - American Specialties, Inc. - Surface Mounted Cast Iron Cover Sensor Hand Dryer - Grey, 100-240 Volt White hand dryer is shown. Please note this hand dryer is GREY . Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, heavy-duty cast iron 1/4 inch thick, and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$423.51 See It
ASI 0185 | American Specialties Roval Steel Cover Hand Dryer, White, 100-240 Volt

ASI 0185 - American Specialties, Inc. - Surface Mounted Steel Cover Sensor Hand Dryer - White, 100-240 Volt Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, 16 gauge thick drawn steel or type 304 stainless steel and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel on steel or bright or satin finish on stainless steel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$340.40 See It
ASI 20199-1 | American Specialties Roval Semi-Recessed Hand Dryer, 120 Volt

ASI 20199-1 - American Specialties, Inc. - Roval Semi-Recessed Hand Dryer (120v.) Roval (TM) Collection Semi-Recessed Hand Dryer operates automatically from IR sensor that activates dryer when hands are placed in sensor zone. Cabinet full panel shall be drawn seamless and shall have bowed front face and gently radiused edges to provide added strength and complimentary appearance for modern washroom aesthetics. Cover shall be fabricated in one piece of 18 gauge thick type 304 stainless steel alloy 18-8. Hand drying recess shall be same grade and gauge. All exposed surfaces shall have a satin finish and shall be protected during shipment by PVC film easily removable after installation. Cabinet shall be 20 gauge corrosion protected steel with a 1/2 inch wide perimeter trim to lay flush against wall and shall have concealed pin-hex security screws to close cover. Motor and heating element shall have internal resetting automatic thermal protection. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten years. Technical Data Sheet (PDF)

more >>
KandJCA
$517.59 See It
ASI 0198-2 | American Specialties TURBO-Dri White Hand Dryer, 220-240 Volt

ASI 0198-2 - American Specialties, Inc. - TURBO-Dri (TM) High Speed Hand Dryer (220-240v.) - White Surface Mounted High-Speed Hand Dryer shall operate automatically from IR sensor activated by beam reflection from objects placed in sensing zone. Motor and heating element shall have internal resetting automatic thermal protection. Unit shall develop 60 CFM of heated air and shall provide drying time of less than 15 seconds. Cover shall be heavy-duty, one piece formed 18 gauge steel finished on all exposed surfaces with white porcelain enamel. Fixed directional air nozzle shall be heavy-duty, rust proof and highly tamper resistant. Air intake slots shall not allow access to internal parts. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self-calibrate to provide uniform sensitivity over its entire life span. Sensitivity shall be adjustable by owner to suit mounting conditions and intended usage population. Entire unit shall be internally electrically grounded. Unit shall be warranted against defects in materials or workmanship for five years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$324.21 See It
ASI 0195-41 | American Specialties Roval Cast Iron Black Hand Dryer, 100-240 Volt

ASI 0195-41 - American Specialties, Inc. - Surface Mounted Cast Iron Cover Sensor Hand Dryer - Black, 100-240 Volt White hand dryer is shown. Please note this hand dryer is BLACK . Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, heavy-duty cast iron 1/4 inch thick, and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$423.51 See It
ASI 20199-2 | American Specialties Roval Semi-Recessed Hand Dryer, 240 Volt

ASI 20199-2 - American Specialties, Inc. - Roval Semi-Recessed Hand Dryer (240v.) Roval (TM) Collection Semi-Recessed Hand Dryer operates automatically from IR sensor that activates dryer when hands are placed in sensor zone. Cabinet full panel shall be drawn seamless and shall have bowed front face and gently radiused edges to provide added strength and complimentary appearance for modern washroom aesthetics. Cover shall be fabricated in one piece of 18 gauge thick type 304 stainless steel alloy 18-8. Hand drying recess shall be same grade and gauge. All exposed surfaces shall have a satin finish and shall be protected during shipment by PVC film easily removable after installation. Cabinet shall be 20 gauge corrosion protected steel with a 1/2 inch wide perimeter trim to lay flush against wall and shall have concealed pin-hex security screws to close cover. Motor and heating element shall have internal resetting automatic thermal protection. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten years. Technical Data Sheet (PDF)

more >>
KandJCA
$517.59 See It
ASI 0198-1 | American Specialties TURBO-Dri White Hand Dryer, 110-120 Volt

ASI 0198-1 - American Specialties, Inc. - TURBO-Dri (TM) High Speed Hand Dryer (110-120v.) - White Surface Mounted High-Speed Hand Dryer shall operate automatically from IR sensor activated by beam reflection from objects placed in sensing zone. Motor and heating element shall have internal resetting automatic thermal protection. Unit shall develop 60 CFM of heated air and shall provide drying time of less than 15 seconds. Cover shall be heavy-duty, one piece formed 18 gauge steel finished on all exposed surfaces with white porcelain enamel. Fixed directional air nozzle shall be heavy-duty, rust proof and highly tamper resistant. Air intake slots shall not allow access to internal parts. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self-calibrate to provide uniform sensitivity over its entire life span. Sensitivity shall be adjustable by owner to suit mounting conditions and intended usage population. Entire unit shall be internally electrically grounded. Unit shall be warranted against defects in materials or workmanship for five years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$328.66 See It
ASI 0195-71 | American Specialties Roval Cast Iron Almond Hand Dryer, 100-240 Volt

ASI 0195-71 - American Specialties, Inc. - Surface Mounted Cast Iron Cover Sensor Hand Dryer - Almond, 100-240 Volt White hand dryer is shown. Please note this hand dryer is ALMOND . Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, heavy-duty cast iron 1/4 inch thick, and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$423.51 See It
ASI 0185-40 | American Specialties Roval Grey Hand Dryer, Steel Cover, 100-240 Volt

ASI 0185-40 - American Specialties, Inc. - Surface Mounted Steel Cover Sensor Hand Dryer - Grey, 100-240 Volt White hand dryer is shown. Please note this hand dryer is GREY . Surface Mounted Hand Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, 16 gauge thick drawn steel or type 304 stainless steel and shall have all exposed surfaces finished with acid, chip and scratch resistant porcelain enamel on steel or bright or satin finish on stainless steel. Fixed directional air vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Back plate shall be furnished with vibration isolating mounting bushings. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for Ten years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$349.61 See It
ASI 0144 | American Specialties White Hand Dryer, Sensor, Heavy-Duty Cast Aluminum - 208-240 Volt

ASI 0144 - Surface Mounted Sensor White Hand Dryer - Heavy-Duty Cast Aluminum, 208-240 Volt Surface Mounted Automatic Hand and Face Dryer shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection. Cover shall be fabricated of one-piece, heavy-duty cast aluminum 7/64 inch thick, and shall have all exposed surfaces finished with acid, chip and scratch resistant epoxy enamel. Chrome plated flip nozzle shall be heavy duty, rust proof and tamper resistant. Back plate shall be a heavy duty, formed corrosion protected steel plate. Air intake and nozzle shall not allow access to internal parts. Circuitry shall have fail-safe off protection to prevent hold-on. Circuitry shall have a preset start-up delay to eliminate false triggers such as close proximity of passers-by and also a preset delay from last trigger to provide continuous drying time as hands are moved in and out of sensor zone. Sensor shall have an adjustable triggering distance. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials or workmanship for ten years. Owner's Manual shall be provided with unit in carton. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF)

more >>
KandJCA
$259.72 See It
ASI 20200 | American Specialties TRI-Umph High-Speed Hand Dryer

ASI 20200 - TRI-Umph (TM) High-Speed Hand Dryer Roval (TM) Collection Surface Mounted Hand Dryer operates automatically from IR sensors that activate dryer when hands are placed in sensor zone. Ready-status LED lights in hand drying chamber turn soothing blue when activated. Cabinet main panel shall be seamless and shall have bowed front face, gently radiused edges and internal reinforcing ribs to provide added strength and complimentary appearance for modern washroom aesthetics and shall be molded in one piece of 0.06 inch thick ABS. All exposed main panel surfaces shall have a satin finish with appearance of stainless steel. Hand chamber, filter drawer and cabinet back shall be black in same grade. All housing parts shall be permanently treated with antimicrobial Ag positive Ions. Cabinet back steel plates mount flush against wall and shall have concealed pin-hex security screws to retain unit. Motor and heating element shall have internal resetting automatic thermal protection. Fixed directional air nozzles shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts. Ceramic water evaporator plate shall be provided integral with cabinet styling. Drip prevention tray shall be provided with drain port for optional waste line (not supplied) concealed mounted under filter drawer. Concealed HEPA antibacterial triple filter (HEPA (H12), Activated Charcoal and Anti-Microbial layers) will remove particles as small as 0.3 micrometers and shall prevent recycling of contaminated air. Circuitry shall have self-adjusting time-out and failsafe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Dryer unit shall have CE, C-UL?«-US approvals and be listed under the re-examination services of Underwriters Laboratories, Inc. Complete manual & Installation Guide shall be provided with each unit. Unit shall be warranted against defects in materials or workmanship for five years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet for different electrical specifications for each voltage. Technical Data Sheet (PDF)

more >>
KandJCA
$847.88 See It
ASI 0197-2-92 | American Specialties TURBO-Dri Bright Stainless Steel Hand Dryer, 220-240 Volt

ASI 0197-2-92 - American Specialties, Inc. - TURBO-Dri (TM) High Speed Hand Dryer (220-240v.) - Bright Stainless Steel Surface Mounted High-Speed Hand Dryer shall operate automatically from IR sensor activated by beam reflection from objects placed in sensing zone. Motor and heating element shall have internal resetting automatic thermal protection. Unit shall develop 68 CFM of heated air and shall provide drying time of less than 12 seconds. Warm air output temperature and velocity shall be adjustable by owner. Cover shall be fabricated of heavy-duty, one piece formed stainless steel 1/16 inch thick finished on all exposed surfaces as bright polished. Fixed directional air nozzle shall be heavy-duty, rust proof and highly tamper resistant. Air intake slots shall not allow access to internal parts. Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self-calibrate to provide uniform sensitivity over its entire life span. Sensitivity shall be adjustable by owner to suit mounting conditions and intended usage population. Entire unit shall be internally electrically grounded. Motor speed shall be adjustable by owner in range between maximum power and maximum efficiency. Unit shall be warranted against defects in materials or workmanship for five years. ELECTRICAL SPECIFICATIONS See Technical Data Sheet. Technical Data Sheet (PDF) Purchase Semi-Recess Kit 0119-92 to Reduce Protrusion to less than 4"

more >>
KandJCA
$409.87 See It
Search within results
  • Find by Price
    • $ to $