1 to 20 of  100 products for nite white excel acp mint 22 6pk

No exact matches found for nite white excel acp mint 22 6pk

100 similar items found

Excel HO-IW Hand Dryer, Traditional Cast Cover Series, White, Surface Mounted, Automatic

Excel Dryer HO-IW Hand DryerDon't forget, FREE Shipping to lower 48 states on all of our products at ProDryers.comAutomatic Sensor Activated Hand Dryers FEATURES Fully Automatic Hand Dryers are activated by an infrared sensor when hands are placed under the air outlet. Hands Off automatic hand dryers utilize a maintenance-free brushless motor, capacitor initiated for quick starts. Vandal-Proof - features include tamper proof bolts and a side mounted heating element which makes the heating element inaccessible through the air outlet. Automatic Hand Dryer covers are available in either a white epoxy paint or chrome plated finish Custom Colors are also available. SPECIFICATIONS Construction Dryer Cover HO-IW & HO-IC Models: shall be one piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy, and fastened by two chrome plated tamper-proof bolts to a cast zinc alloy wall plate. R76-IW & R76-IC Models: shall be one piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically-applied epoxy, fitted with a fixed, die-cast, chrome plated, zinc alloy nozzle. The wall plates for surface mounted models shall be equipped with (3) 7/8" (22 mm) diameter holes one of which shall be suitable for use with surface conduit, for ease of wiring. Recessed covers shall be fastened by four flat-head, recessed, tamper- proof bolts to wall box. Wall plate shall be fastened to the wall box by four concealed 1/4? (6mm) mounting bolts, and shall be equipped with two knockouts for ease of wiring. HO-IW & HO-IC Models: shall have a chrome plated, die-cast zinc air outlet which shall be fixed to the blower housing and shall be of a design that will not allow foreign objects to enter the dryer. R76-IW & R76-IC Models: shall be equipped with an air inlet opening on the bottom of the casting and covered with a vandal resistant metal protective grill to prevent the entry of foreign objects. A fixed chrome plated, die-cast zinc air outlet nozzle on the front of the cover shall permit a full flow of warm air when in operation, and shall be protected by a cast alloy grating fixed into the blower housing. All internal parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Underwriters' Laboratories, Inc. ListedThe entire dryer shall be listed under the re-examination service of Underwriters' Laboratories, Inc. Mechanism Motor for 60 Hz units shall be capacitor-initiated, brushless type (for longer life and quiet operation) 1/10 H.P. 3450 R.P.M. with self- lubricating bearings. It shall be insulated by a resilient mounting and shall be protected by a self-resetting thermal switch. Motor for 50 Hz units shall be a

more >>
ProDryers.com
$330.00 See It
1911 Auto Slides - Carbon Steel, Recon Model, Novak Sight Cut, .45 Acp

Custom-quality slides from Caspian, ready to be fitted to the frame of your choice. They start as high-quality forgings for extra strength, then are heat-treated to Rc 38-41 before machining for exceptional dimensional stability. Sides are polished, while the rest of the surface is bead-blasted for a non-glare, matte finish. Deep-cut, forward-angled rear cocking serrations prevent slippage when racking, even with a wet hand. Available in 4340 carbon steel (CS) and 416 stainless steel (SS) with .45 ACP, .40 S&W, and 9mm breechfaces. Commander and Officers models in .45 ACP only. Choose a slide without sight cuts (NC), or between two pre-cut dovetail options: a Novak Lo-Mount or Bo-Mar Mfg: Caspian SPECS: 4340 carbon steel, in-the-white, or 416 stainless steel, natural finish. Government model accepts 5" barrel. Commander accepts 4.25" barrel. Officers model accepts 3.5" barrel. All Caspian slides require the use of a 9mm/.38 Super firing pin.

more >>
Brownells
$273.99 See It
White Box Handgun Ammo Cans - .45 Acp Winchester 230gr Fmj 500 Round Ammo Can Bundle -12%

FEATURES: 500 rounds of your choice of ammo: 9mm, 38 Special, 40 S&W, or 45 ACP Packaged in MTM ammo can 10 boxes each of Winchester USA ammunition Ammo can includes built in handle and secure latchesBENEFITS: Receive your ammunition in an easily transported ammo can, ready to take to the range Ammo can will still be useable long after the included ammunition is fired Ammo can aids ammunition organization and transportation High quality Winchester ammunition is perfect for training or practice Mfg: Winchester

more >>
Brownells
$259.99 $229.99 See It
Excel R76-IC Hand Dryer Traditional Cast Cover Series, Recessed, Chrome, Automatic

Excel Dryer R76-IC Hand Dryer Don't forget, FREE Shipping to the continental US on all of our products at ProDryers.comAutomatic Sensor Activated Hand Dryers FEATURES Fully Automatic Hand Dryers are activated by an infrared sensor when hands are placed under the air outlet. Hands Off automatic hand dryers utilize a maintenance-free brushless motor, capacitor initiated for quick starts. Vandal-Proof - features include tamper proof bolts and a side mounted heating element which makes the heating element inaccessible through the air outlet. Automatic Hand Dryer covers are available in either a white epoxy paint or chrome plated finish Custom Colors are also available. SPECIFICATIONS Construction Dryer Cover HO-IW & HO-IC Models: shall be one piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy, and fastened by two chrome plated tamper-proof bolts to a cast zinc alloy wall plate. R76-IW & R76-IC Models: shall be one piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically-applied epoxy, fitted with a fixed, die-cast, chrome plated, zinc alloy nozzle. The wall plates for surface mounted models shall be equipped with (3) 7/8" (22 mm) diameter holes one of which shall be suitable for use with surface conduit, for ease of wiring. Recessed covers shall be fastened by four flat-head, recessed, tamper- proof bolts to wall box. Wall plate shall be fastened to the wall box by four concealed 1/4? (6mm) mounting bolts, and shall be equipped with two knockouts for ease of wiring. HO-IW & HO-IC Models: shall have a chrome plated, die-cast zinc air outlet which shall be fixed to the blower housing and shall be of a design that will not allow foreign objects to enter the dryer. R76-IW & R76-IC Models: shall be equipped with an air inlet opening on the bottom of the casting and covered with a vandal resistant metal protective grill to prevent the entry of foreign objects. A fixed chrome plated, die-cast zinc air outlet nozzle on the front of the cover shall permit a full flow of warm air when in operation, and shall be protected by a cast alloy grating fixed into the blower housing. All internal parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Underwriters' Laboratories, Inc. ListedThe entire dryer shall be listed under the re-examination service of Underwriters' Laboratories, Inc. Mechanism Motor for 60 Hz units shall be capacitor-initiated, brushless type (for longer life and quiet operation) 1/10 H.P. 3450 R.P.M. with self- lubricating bearings. It shall be insulated by a resilient mounting and shall be protected by a self-resetting thermal switch. Motor for 50 Hz units shall

more >>
ProDryers.com
$420.00 See It
Excel HO-IC Hand Dryer, Traditional Cast Cover Series, Chrome, Surface Mounted, Automatic

Excel Dryer HO-IC Hand Dryer Don't forget, FREE Shipping to lower 48 states on all of our products at ProDryers.comAutomatic Sensor Activated Hand Dryers FEATURES Fully Automatic Hand Dryers are activated by an infrared sensor when hands are placed under the air outlet. Hands Off automatic hand dryers utilize a maintenance-free brushless motor, capacitor initiated for quick starts. Vandal-Proof - features include tamper proof bolts and a side mounted heating element which makes the heating element inaccessible through the air outlet. Automatic Hand Dryer covers are available in either a white epoxy paint or chrome plated finish Custom Colors are also available. SPECIFICATIONS Construction Dryer Cover HO-IW & HO-IC Models: shall be one piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy, and fastened by two chrome plated tamper-proof bolts to a cast zinc alloy wall plate. R76-IW & R76-IC Models: shall be one piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically-applied epoxy, fitted with a fixed, die-cast, chrome plated, zinc alloy nozzle. The wall plates for surface mounted models shall be equipped with (3) 7/8" (22 mm) diameter holes one of which shall be suitable for use with surface conduit, for ease of wiring. Recessed covers shall be fastened by four flat-head, recessed, tamper- proof bolts to wall box. Wall plate shall be fastened to the wall box by four concealed 1/4? (6mm) mounting bolts, and shall be equipped with two knockouts for ease of wiring. HO-IW & HO-IC Models: shall have a chrome plated, die-cast zinc air outlet which shall be fixed to the blower housing and shall be of a design that will not allow foreign objects to enter the dryer. R76-IW & R76-IC Models: shall be equipped with an air inlet opening on the bottom of the casting and covered with a vandal resistant metal protective grill to prevent the entry of foreign objects. A fixed chrome plated, die-cast zinc air outlet nozzle on the front of the cover shall permit a full flow of warm air when in operation, and shall be protected by a cast alloy grating fixed into the blower housing. All internal parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Underwriters' Laboratories, Inc. ListedThe entire dryer shall be listed under the re-examination service of Underwriters' Laboratories, Inc. Mechanism Motor for 60 Hz units shall be capacitor-initiated, brushless type (for longer life and quiet operation) 1/10 H.P. 3450 R.P.M. with self- lubricating bearings. It shall be insulated by a resilient mounting and shall be protected by a self-resetting thermal switch. Motor for 50 Hz units shall be a

more >>
ProDryers.com
$390.00 See It
ET2 StarStrand 6-Pin Male Extender (6/PK) - E53341

StarStrand 6-Pin Male Extender (6/PK). Mysteriously illuminating from above, below, or within, StarStrand discreetly goes where no light has gone before, even under water. Unthinkably thin strips of LEDs adhere to surfaces unfit for traditional fixtures, bathing the most unusual places with dimmable warm white light or a remote-controlled rainbow of vibrant colors for a virtually undetectable, surprisingly unpredictable effect.

more >>
Luxicore
$16.00 See It
ET2 StarStrand 6-Pin Male Extender (6/PK) - E53341

StarStrand 6-Pin Male Extender (6/PK). Mysteriously illuminating from above, below, or within, StarStrand discreetly goes where no light has gone before, even under water. Unthinkably thin strips of LEDs adhere to surfaces unfit for traditional fixtures, bathing the most unusual places with dimmable warm white light or a remote-controlled rainbow of vibrant colors for a virtually undetectable, surprisingly unpredictable effect.

more >>
Lumitera
$16.00 See It
1911 Auto Slides - Carbon Steel, Novak Sight Cut, .45 Acp

Custom-quality slides from Caspian, ready to be fitted to the frame of your choice. They start as high-quality forgings for extra strength, then are heat-treated to Rc 38-41 before machining for exceptional dimensional stability. Sides are polished, while the rest of the surface is bead-blasted for a non-glare, matte finish. Deep-cut, forward-angled rear cocking serrations prevent slippage when racking, even with a wet hand. Available in 4340 carbon steel (CS) and 416 stainless steel (SS) with .45 ACP, .40 S&W, and 9mm breechfaces. Commander and Officers models in .45 ACP only. Choose a slide without sight cuts (NC), or between two pre-cut dovetail options: a Novak Lo-Mount or Bo-Mar Mfg: Caspian SPECS: 4340 carbon steel, in-the-white, or 416 stainless steel, natural finish. Government model accepts 5" barrel. Commander accepts 4.25" barrel. Officers model accepts 3.5" barrel. All Caspian slides require the use of a 9mm/.38 Super firing pin.

more >>
Brownells
$273.99 See It
ET2 StarStrand 6-Pin Male End Cap (6/PK) - E53344

StarStrand 6-Pin Male End Cap (6/PK). Mysteriously illuminating from above, below, or within, StarStrand discreetly goes where no light has gone before, even under water. Unthinkably thin strips of LEDs adhere to surfaces unfit for traditional fixtures, bathing the most unusual places with dimmable warm white light or a remote-controlled rainbow of vibrant colors for a virtually undetectable, surprisingly unpredictable effect.

more >>
Luxicore
$8.00 See It
ET2 StarStrand 6-Pin Male/Male Adapter (6/PK) - E53342

StarStrand 6-Pin Male/Male Adapter (6/PK). Mysteriously illuminating from above, below, or within, StarStrand discreetly goes where no light has gone before, even under water. Unthinkably thin strips of LEDs adhere to surfaces unfit for traditional fixtures, bathing the most unusual places with dimmable warm white light or a remote-controlled rainbow of vibrant colors for a virtually undetectable, surprisingly unpredictable effect.

more >>
Lumitera
$16.00 See It
Bullet Proof Firing Pin For 1911 Auto - .45 Acp Firing Pin

Machined to exact tolerances, then heat treated for many times the service life of a standard firing pin. Available for .38/9mm and .45 ACP. Mfg: Wilson Combat SPECS: Steel, In-the-white, fits both Series 70 and 80 Series. Models for .38/9mm and .45 ACP.

more >>
Brownells
$14.99 See It
ET2 StarStrand 6-Pin Male/Male Adapter (6/PK) - E53342

StarStrand 6-Pin Male/Male Adapter (6/PK). Mysteriously illuminating from above, below, or within, StarStrand discreetly goes where no light has gone before, even under water. Unthinkably thin strips of LEDs adhere to surfaces unfit for traditional fixtures, bathing the most unusual places with dimmable warm white light or a remote-controlled rainbow of vibrant colors for a virtually undetectable, surprisingly unpredictable effect.

more >>
Luxicore
$16.00 See It
ET2 StarStrand 6-Pin Male End Cap (6/PK) - E53344

StarStrand 6-Pin Male End Cap (6/PK). Mysteriously illuminating from above, below, or within, StarStrand discreetly goes where no light has gone before, even under water. Unthinkably thin strips of LEDs adhere to surfaces unfit for traditional fixtures, bathing the most unusual places with dimmable warm white light or a remote-controlled rainbow of vibrant colors for a virtually undetectable, surprisingly unpredictable effect.

more >>
Lumitera
$8.00 See It
Excel R76-IW Hand Dryer Traditional Cast Cover Series, Recessed, White, Automatic

Excel Dryer R76-IW Hand DryerDon't forget, FREE Shipping to the continental US on all of our products at ProDryers.comAutomatic Sensor Activated Hand Dryers FEATURES Fully Automatic Hand Dryers are activated by an infrared sensor when hands are placed under the air outlet. Hands Off automatic hand dryers utilize a maintenance-free brushless motor, capacitor initiated for quick starts. Vandal-Proof - features include tamper proof bolts and a side mounted heating element which makes the heating element inaccessible through the air outlet. Automatic Hand Dryer covers are available in either a white epoxy paint or chrome plated finish Custom Colors are also available. SPECIFICATIONS Construction Dryer Cover HO-IW & HO-IC Models: shall be one piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy, and fastened by two chrome plated tamper-proof bolts to a cast zinc alloy wall plate. R76-IW & R76-IC Models: shall be one piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically-applied epoxy, fitted with a fixed, die-cast, chrome plated, zinc alloy nozzle. The wall plates for surface mounted models shall be equipped with (3) 7/8" (22 mm) diameter holes one of which shall be suitable for use with surface conduit, for ease of wiring. Recessed covers shall be fastened by four flat-head, recessed, tamper- proof bolts to wall box. Wall plate shall be fastened to the wall box by four concealed 1/4? (6mm) mounting bolts, and shall be equipped with two knockouts for ease of wiring. HO-IW & HO-IC Models: shall have a chrome plated, die-cast zinc air outlet which shall be fixed to the blower housing and shall be of a design that will not allow foreign objects to enter the dryer. R76-IW & R76-IC Models: shall be equipped with an air inlet opening on the bottom of the casting and covered with a vandal resistant metal protective grill to prevent the entry of foreign objects. A fixed chrome plated, die-cast zinc air outlet nozzle on the front of the cover shall permit a full flow of warm air when in operation, and shall be protected by a cast alloy grating fixed into the blower housing. All internal parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Underwriters' Laboratories, Inc. ListedThe entire dryer shall be listed under the re-examination service of Underwriters' Laboratories, Inc. Mechanism Motor for 60 Hz units shall be capacitor-initiated, brushless type (for longer life and quiet operation) 1/10 H.P. 3450 R.P.M. with self- lubricating bearings. It shall be insulated by a resilient mounting and shall be protected by a self-resetting thermal switch. Motor for 50 Hz units shall b

more >>
ProDryers.com
$360.00 See It
Cotton Face-Pillow Covers 6-pk.

Find Massage, Warming And Spa at Target.com! Cotton Face-Pillow Covers 6-pk.

Target
$22.99 See It
Officers Acp/P-12/Kimber & Pro Carry Compact Recoil Spring - 22 Lb. Officers/P12 Spring

Replaces the factory double spring on Colt Officers ACP and the single spring on Para ­Ordnance P12. Must be used with full-diameter (nominal .330''''), full-length, after market recoil spring guide rods. Factory standard is 22 lb. Supplied with extra power firing pin spring. Also fits Kimber Compact and Pro Carry with factory guide rod. Mfg: Wolff SPECS: Factory standard is 22 lb. recoil spring.

more >>
Brownells
$7.89 See It
Prism Utility Ball 6-pk.

Find Sports Balls, Pucks And Flying Discs at Target.com! Voit Prism Utility Ball 6-pk. Color: Multi-Colored. Gender: Unisex.

more >>
Target
$27.99 See It
Tuff-Coat Foam Flying Disc 6-pk.

Find Sports Balls, Pucks And Flying Discs at Target.com! Tuff-Coat Foam Flying Disc 6-pk. Color: Multi-Colored.

more >>
Target
$31.99 See It
Bubble Cushion Mailer 6-pk. 9.5in x 13.5in

Find Envelopes And Mailers at Target.com! Scotch Bubble Cushion Mailer 6-pk. 9.5in x 13.5in Color: None.

more >>
Target
$5.79 See It
Self-Sealing Bubble Mailers 6-pk. 8.5in x 11in

Find Envelopes And Mailers at Target.com! Scotch Self-Sealing Bubble Mailers 6-pk. 8.5in x 11in Color: None.

more >>
Target
$5.49 See It
Search within results
  • Find by Price
    • $ to $